Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 @ 1400 Nm @ rpm Dimension: 3,500 x 1,920 x 2,200 axle configuration: 2WD No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Iedey Tyg Depfx Aqwsba Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.200 kg Wheelbase: 205 cm Engine type: New Holland S8000 Emission class: Euro 2

Condition: new, Year of construction: 2025, power: 40 kW (54.38 HP), motor manufacturer: New Holland, gearing type: mechanical, fuel type: diesel, maximum speed: 30 km/h, total height: 2,200 mm, total length: 3,500 mm, total width: 1,920 mm, = Additional options and accessories = - PTO = Remarks = Country of origin: India Displacement: 2,931cc Torque: 203 Nm @ 1400 rpm Dimension: 3,500 x 1,920 x 2,200 No. of cylinders / aspiration: 3 / naturally Capacity (cm³): 2931 Bore x stroke (mm): 104x115 Power @rated speed (2300 rpm) - ECE R120 (kW/hp): 40.25 / 54.0 Max. torque (gross) (Nm@rpm): 203 @ 1400 Torque rise (%) 25 Transmission - 30 kph 8F+2R constant mesh & sliding mesh (optionally synchronised on 3th & 4th gear) with epicyclical reduction for low - high range selection Speed range (kph) 2.97-29.74 Optional with creeper (F+R) 12+3 Min. speed with creeper (kph) 0.96 Optional without creeper (F+R) 12+3 Speed range (kph) 2.0-29.74 Flexion Bar lower link draft sensing Standard Rear linkage category Cat. II Mechanical lift with Lift-O-Matic™ Standard Position draft Iedpfx Aey Tyg Rsqwsba mixed and float controls Standard Main pump flow - Standard (lpm) 45 Steering pump flow (lpm) 28 Max. number of remote valves 2 Linkage Maximum lift capacity at ball ends with no assist arms (kg) 1400 Maximum lift capacity at ball ends with assist arms (kg) 1850 Engine speed at 540 rpm (rpm) 1967 PTO activation mechanical Turn angle 2WD/4WD (°) 52/38 Min. turn radius w/brakes 2WD/4WD (mm) 3205/4200 Dimensions Overall length 2WD/4WD (mm) including FWC 3500 Overall width 2WD/4WD (mm) 1920 Height to top of exhaust 2WD/4WD (mm) 2200/2200 Wheelbase 2WD/4WD 2050/2005 Track width Front 2WD (mm) 1410-1710 Track width Front 4WD (mm) 1445-1875 Track width Rear Min. / Max. (all axle types) (mm) 1570-2100 Ground clearance under rear axle (2WD/4WD) (mm) 455/434 Weights Minimum weight 2WD/4WD (kg) (With ROPS & FWC 55Kg) 2200/2400 = More information = Drive: Wheel Number of cylinders: 3 Engine capacity: 2.931 cc GVW: 2.400 kg Wheelbase: 205 cm Engine type: New Holland S8000 Fuel tank: 60 litres Emission class: Euro 2

Condition: excellent (used), 506 USED Rego Vario pastry beater. TECHNICAL DATA: - power: 2,2 kW - power supply: 400V - kettle capacity: approx. 32-40L Ibodpfx Aqszufapjwea The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: used, power: 200 kW (271.92 HP), first registration: 05/2018, front tire size: 710-26,5, rear tire size: 710-26,5, mileage: 11,870 km, axle configuration: > 3 axles, number of seats: 1, Equipment: cabin, crane, | John Deere 1270G Harvester | Auxiliary heater | 11,870 operating hours | 8x8 drive | Rotatable cabin | Air conditioning | Good condition | Fully operational | Drive: Hydrostatic/mechanical power transmission with 2-speed gearbox | Load-sensing hydraulic system, stabilization brake | Engine: 6-cylinder John Deere 6090 PowerTech PLUS engine compliant with EPA FT4/EU Stage V emission standards | 200 kW, 1315 Nm @ 1200-1400 rpm | Reversible hydraulic fan, PowerCore air filter, glycol-based coolant | Tires: Front axle (4) 710-26.5 Nokian Forest King F2 (3050 mm), Rear axle (4) 710-26.5 Nokian Forest King F2 (3050 mm) | Crane: Parallel boom CH7 (10 m reach), gross lifting torque 197 kNm, slewing torque 50 kNm, slewing angle 220°, endless rotator Black Bruin BBR 15 HD with braked pendulum | Subject to errors, data entry errors and prior sale. Ijdpey Egwyjfx Aqwoba

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 885 h, motor manufacturer: John Deere, gearing type: automatic, fuel type: diesel, first registration: 01/2014, Equipment: air conditioning, cabin, front power take-off, hydraulics, John Deere 1585 lawnmower with a 900-liter grass collection bin, road approval, all-wheel drive, 60-inch mowing deck, additional control unit at the front, and air conditioning. Isdpoy Uh E Dsfx Aqweba

Condition: good (used), Year of construction: 1990, power: 60 kW (81.58 HP), fuel type: diesel, color: red, General information Year of manufacture: 1990 Model year: 1990 Serial number: P05051 Ibedjztnypspfx Aqwea Technical information Number of cylinders: 4 Drive: Wheel Empty weight: 3.425 kg Condition Technical condition: good Visual appearance: good Damages: none Financial information Price: On request

Condition: new, functionality: fully functional, Year of construction: 2026, High-performance forestry mulcher for excavators from 9 to 13 tons The Brugger BFM 100 was developed for demanding tasks in forestry, landscaping, and for clearing and maintenance work. Thanks to its working width of 1,000 mm, it efficiently shreds brush, shrubs, branches, and wood up to a diameter of approximately 250 mm. The large-sized rotor with 16 carbide-tipped tools, in combination with the powerful V-belt drive, ensures smooth operation and high area performance. The reinforced steel housing is designed for daily professional use and reliably withstands high loads. Your advantages at a glance: Suitable for excavators from 9 to 13 tons 1,000 mm working width for efficient operation 16 carbide-tipped mulching tools with high wear resistance Shreds branches, bushes, and wood up to approximately 250 mm in diameter Robust V-belt drive for reliable power transmission Three adjustable working depths for different applications Stable and durable steel construction for professional continuous use Technical data Model - BFM 100 Working width - 1,000 mm Suitable for excavators - 9–13 t Max. material diameter - approx. 250 mm Working depth - -70 mm / -30 mm / +10 mm Hydraulic connections - 1× supply, 1× return, 1× leak oil line Required hydraulic oil flow - 90–130 l/min Max. operating pressure - 250 bar Drive - V-belt Rotor shaft diameter - 168 mm Rotor shaft material thickness - 20 mm Rotor diameter incl. tools - 416 mm Housing thickness - 8 mm Side wall thickness - 12 mm Tools - 16 carbide-tipped mulching blades Weight - approx. 760 kg ----- For customers with a valid VAT ID number, a net invoice will be issued. Contact us for a customized offer! PLEASE NOTE THAT OUR COMPANY HEADQUARTERS IS LOCATED IN 39030 GAIS, SOUTH TYROL (not in Mittenwald). Ibsdpfjzqthtex Aqwja

Condition: used, Used truck tarpaulins already disassembled for pickup various sizes available in multiple quantities ##### PLEASE CALL - NO EMAILS! ##### Ibsdpfx Aezu Irhjqwoa PICKUP ONLY, BY APPOINTMENT! #####

Condition: excellent (used), functionality: fully functional, Year of construction: 1940, For sale: a Ritscher three-wheeled tractor in fully functional condition, complete with original period documents. Isdozut Eyopfx Aqwoba

Condition: new, High-performance forestry mulcher for excavators from 6 to 8 tons The BFM 80 was specifically developed for professional work in forestry, landscaping, and for clearing and maintenance operations. With its working width of 800 mm, the mulcher is ideal for shredding brush, shrubs, branches, and wood up to a diameter of approximately 200 mm. The large-sized rotor with 16 carbide tools, combined with the robust V-belt drive, ensures high shredding performance and smooth operation. Thanks to the reinforced steel construction, the BFM 80 is designed for daily use under demanding conditions and impresses with its long service life. Your advantages at a glance Suitable for excavators from 6 to 8 tons 800 mm working width for precise and efficient work 16 carbide mulching tools with high wear resistance Shreds branches, brush, and wood up to approximately 200 mm in diameter Robust V-belt drive for reliable power transmission Ibedpezqzq Nofx Aqwsa Three adjustable working depths for different applications Stable and durable steel construction for professional continuous use Technical data Model - BFM 80 Working width - 800 mm Suitable for excavators - 6–8 t Max. material diameter - approx. 200 mm Working depth - -70 mm / -30 mm / +10 mm Number of working depths - 3 positions Hydraulic connections - 1× supply, 1× return, 1× leak oil line Required hydraulic oil flow - 38–80 l/min Max. operating pressure - 250 bar Drive - V-belt Rotor shaft diameter - 219 mm Rotor diameter incl. tools - 465 mm Housing thickness - 8 mm Side wall thickness - 12 mm Tools - 16 carbide mulching blades Weight - approx. 450 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 1,030 h, overall weight: 1,800 kg, Jensen A425 / Wood Chipper / Shredder / Chopper / Ø 20 cm • Manufacturer: Jenzen • Type: A425 • Year of manufacture: 10/18/2016 • Operating hours: 1030 hours • Brushwood shredder • Wood chipper • Shredder • Chopper • 2x knives, new • Front bearing, new • Flange shaft, new • Clutch for storage unit, new • Diameter of knife discs: 73 cm x 3 cm • Number of knives: 2 • Discharge chute, 360° rotatable – deflector flap, infinitely adjustable Ibjdpozipw Usfx Aqwoa • Infeed opening: 24.5 cm x 20 cm • Stem diameter: 20 cm • Cutting length: adjustable from 5–20 mm • Chopping capacity: approx. 20 m3/h • Max. speed: 1000 • Permissible support load: 75 kg • Transport length: 1.20 meters • Transport width: 90 cm • Transport height: 2.10 meters • Total weight: 1800 kg • German machine • Immediately ready for use • This offer is non-binding and without obligation. - Subject to prior sale, - Errors and/or typos not excluded. - Sale subject to our general terms and conditions.

Condition: used, 1 unit of KIOTI CS 2520 diesel lawn tractor Engine: liquid-cooled, 3-cylinder KIOTI diesel engine, drive & traction: switchable all-wheel drive (4WD) including mechanical rear differential lock, fuel tank capacity: 25.5 liters of diesel, serial number: 047300068 Iedpfx Ajzqanyoqwsba Color: as shown in the pictures, see images and inspection Condition: new

Condition: used, Year of construction: 1988, power: 53 kW (72.06 HP), First registration: June 21, 1988. IHC 754 XL, first owner, in excellent condition. Operating hours: approx. 8,600. Year of manufacture: 1988. Front three-point linkage, front PTO, 30 km/h gearbox. Price: 24,500.00 Euros net. Location: null. Iodezdmutspfx Aqweba

Condition: new, working width: 1,25,000 mm, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. H7 125 Flail Mulcher / incl. floating linkage / NEW equipment / in stock & immediately available Price: €13,890.00 net / €16,529.10 gross - Working width: 125 cm - Overall width: 140 cm - Depth: 97 cm - Height: 57 cm - Weight: 410 kg - Mulches grass and light brush up to 7 cm Ø - Suitable for excavators from 5 to 15 tons - Universal interface for mounting various adaptor plates - S420: double-walled housing made of high-strength S420 steel Isdeyix Haepfx Aqwoba - WEARPLATE: housing with replaceable wear plates - LOW PROFILE: low profile design - Indirect V-belt drive with 4 belts - Drive prepared for hydraulic motor depending on the carrier’s oil flow - 4D ROLLER: reinforced support roller, 152 mm Ø, with double-taper roller bearings, height-adjustable - COUNTER CUTTERS: two rows of replaceable drop-forged counter blades - Rotor wall thickness: 12.5 mm - Front guard with chains - Rear guard made of rubber - Color: red RAL3020 · anthracite RAL7021 OPT 371 HELIX ROTOR TECHNOLOGY - Triple helix rotor with SMO flails (standard) - 12 pieces, part number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement, 29-58 cm³, and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 100 - 300 - Required hydraulic oil flow in l/min (min-max): 55 – 150 OPT 099 Floating linkage (parallelogram guidance) OPT 555 Pendulum adaptor Three hydraulic lines are required: supply, return, and leakage oil. Optional: MS08 adaptor plate incl. bolts and installation = €750.00 net Multiple other adaptor plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of different Seppi M. products in our warehouse, all ready for immediate delivery! Mr. Herden (phone) will be happy to assist you. Financing offers available upon request. We are an official distribution and service partner for Westtech. We are an official distribution and service partner for OilQuick. We are an official distribution and service partner for Holp. We are an official distribution and service partner for Magni telehandlers. We are an official distribution and service partner for DMS. We are an official distribution and service partner for Gierking GMT. We are an official distribution and service partner for Weber MT. We are an official distribution and service partner for Seppi M. We are an official distribution and service partner for JCB construction machinery. We are an official distribution and service partner for Mercedes-Benz. We are an official distribution and service partner for Iveco. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Subject to errors and prior sale! = Further information = Intended use: agriculture Please contact Marius Herden for more information.

Condition: ready for operation (used), Year of construction: 2012, Load capacity: 5600kg, loading volume: 12m³/12000l, top speed: 25km/h, number of augers: 1, tire size: 315/60 R22.5, tire tread depth: 10mm, weighing system: scales, feed discharge: front left, corrosion: visible. Documentation available. On-site inspection is possible. Ibedpfxouantus Aqwoa

Condition: used, Year of construction: 2015, gearing type: other, first registration: 01/2015, color: grey, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden, Bay 6 Iedozugixepfx Aqwoba Transmission number: 71506601666746, Atego transmission G90-6/6.70-0.73! Removed from a Daimler-Benz Atego 1221 L 4x2, chassis number: WDB96702510010316! Engine -9530- available at an additional cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), Year of construction: 2008, operating hours: 7,348 h, fuel type: diesel, first registration: 06/2008, Model year: 2008 Number of cylinders: 6 Engine displacement: 200 cc = Company information = Isdpszuzvtefx Aqwsba Hello

Condition: used, functionality: fully functional, Year of construction: 2010, operating hours: 3,859 h, power: 51 kW (69.34 HP), motor manufacturer: VM, gearing type: hydrostat, fuel type: diesel, first registration: 04/2010, color: red, Equipment: air conditioning, front power take-off, lighting, Tractor: + Reform-Werke + Metrac H7 X + First registered: 04/26/2010 + 3,859 operating hours + Front three-point linkage + Front and rear PTO + Front and rear hydraulics + Hydrostatic transmission + Joystick control + 4-cylinder VM diesel engine, 70 hp, 2970 cc + Switchable all-wheel drive Ibsdpeztq D Defx Aqwsa + Locking differentials + Air conditioning + Steerable rear wheels + Hectare meter counter + Municipal vehicle, first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale!

Condition: new, gearing type: other, color: black, driver cabin: other, Vehicle location: Bovenden Ijdpfx Ajztz Tpsqwsba Rigid axle, 17.5", 8-hole, drum brake Overall length: approx. 2,300 mm New, from old stock. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to changes, prior sale, and errors!

Condition: new, gearing type: other, color: black, driver cabin: other, Vehicle location: Bovenden Iedpfx Aqeztz Tvjwsba SAF trailer axle Type: SKRZ9030 Base type: SNK3020-13Z Test report: TDB0487 Serial No.: 157 Identification No.: 163 90 10 1 67 0 9-ton trailer axle, drum brake Overall length: approx. 2,220 mm New, from old stock. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, gearing type: other, color: black, mileage: 1,001 km, suspension: air, driver cabin: other, Vehicle location: Bovenden NHZF 9010-15 Eco-P 190424308 Ijdpfxeztz Tcj Aqwsba ID1-N102/ID2-SN3020/ID3-10006/ID4-36102104 20.68.11.0015 9-ton trailer axle, air-sprung External length: approx. 2,120 mm ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, gearing type: other, color: green, suspension: air, driver cabin: other, Vehicle location: Bovenden Iodpfx Aoztz T Aeqweba NMZF 12010 Eco-M, 10-hole Serial No. 3020 ZZ110TDB0054/N11536102104/ZZ130TDB0324 31.40.502.080 Drum brakes! Permissible static axle load 12,000 kg Overall length: approx. 2,340 mm New, from old stock. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: new, gearing type: other, color: black, suspension: air, driver cabin: other, Vehicle location: Bovenden NHZF 9010-15 Eco-P Ijdpfxjztz Tio Aqwoba Serial number: 3020 130534288 ID1-N102/ID2-SN3020/ID3-10006/ID4-36102104 27.58.502.006 9-ton trailer axle, air-suspended External length: approx. 2,170 mm New, from old stock. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, gearing type: other, color: black, suspension: air, driver cabin: other, Vehicle location: Bovenden Gigant trailer axle, 10-hole Ibjdpfsztx Ausx Aqwoa Air suspension Outer length: approx. 2,070 mm New, from old stock. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, Year of construction: 2023, operating hours: 2,159 h, power: 37 kW (50.31 HP), maximum speed: 20 km/h, Operating hours: 2159. Equipped with ROPS operator protection canopy. Kubota diesel engine D1803-CR-T3, 37 kW = 50 hp. Rear weight end plate. High-speed gear, 20 km/h. Hydraulic tool locking system. Retention system. Special equipment: Rear frame with widened fenders. Counterweight 100 kg. Tires 15.0/55-17 AS, 6-hole, ET -45. Gear pump, reinforced, 19 ccm (requires 37 kW engine). Work light set, LED, 800 lumens (2x front, 1x rear). Receiver frame, Euro-W. Hydraulic locking. Towing device with pin and lashing eyes. Location: Ralf Ademes. Iodpfx Aoxmrvuoqwsba