ADS Hungary Kft

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Fodey Rqhtepfx Aa Negb Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Fgodpfx Aasy Rqhae Nsb Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Fgedpfsy Rqgvex Aa Neb Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: good (used), Year of construction: 2009, clamping force: 1,500 kN, Equipment: documentation/manual, Controll CC200 Fedpfx Aaoy Rn E Ao Nsgb Clamping force: 150 t Victory VC 1050/150 💉 INJECTION UNIT Screw diameter: 50 mm Screw stroke: 215 mm Max. injection capacity: 422 cm³ Screw speed: 230 min⁻¹ L/D ratio (3-zone): 20 Recovery rate (3-zone): 32 g/s L/D ratio (barrier): 24 Recovery rate (barrier): 44 g/s Injection rate (regen.): 211 cm³/s Injection pressure (regen.): 1955 bar Injection pressure (max): 2330 bar Nozzle stroke: 350 mm Nozzle contact pressure: 67 kN Heating wattage: 15,3 kW Heating zones incl. nozzle: 5 Type: Horizontal Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2023, clamping force: 2,500 kN, screw diameter: 55 mm, overall weight: 8,400 kg, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine. • Clamping unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max mould height: 580 mm • Min mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min mould dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 L • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 – CP053 • Features: • 15” colour touchscreen • Euromap 67 robot interface • USB memory • 200 mould memory • Cycle history • Alarm tower • RFID login/password • Multilanguage interface • Process graphs • Maintenance pages • Metric / imperial selectable • Included options / extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial extraction • Festo air blow system Fgsdpfx Aaoy N Sqmj Nsb • 12-zone PSG central lubrication • 4-way flowmeter • Robot interface • Included screw H 3 zones • CE certified work cell Additional equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travels: X 2000 mm / Y 880 mm / Z 1300 mm • Max extractable weight: 12 kg • Power: 400 VAC / 50-60 Hz • Precision: 0.1 mm • Robot weight: 530 kg • Included: Touchscreen controller, USB programs, pneumatic gripper, vacuum cups, conveyor ready • Peripherals included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 L • Power: 1150 W • Inlet diameter: 40 mm • Capacity: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Condition: used, Year of construction: 2015, (1) Injection molding machine, Handling: Wittmann | W833-0747 | 2014 Temperature control: HB Therm | Dryer: Somos | RDX27 | 2015 Miscellaneous: 1x Protective Enclosure 1x Auxiliary Unit, by Ferromatik Milacron 1x Automation, by Wittmann + Conveyor Belts, by Frasch Technical Details: Power supply voltage (V): 400 Frequency (Hz): 50 Approx. weight (t): 10.1 + 0.6 Fedpfxoy N R Tme Aa Negb

Condition: used, Year of construction: 2014, (1) Injection molding machine, Handling: Sepro Robotique | Success 22 | 2016 Temperature control: GWK Miscellaneous: 1x Protective Enclosure 1x Conveyor Belt, 1x Conveyor Unit, manufacturer Somos FG 204; year of manufacture 2022 Technical details: Clamping force (kN): 2100 Tie bar distance (mm): 580 Injection unit: 430 Power supply: 3/400 V Frequency (Hz): 50 Current 1 (A): 175 Current 2 (A): 116 Current 3 (A): 59 Weight (t): 8.93 Pressure (bar): 190 Fedpfxoy N R R Es Aa Nogb

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure 1x Handling system 1x Conveyor belt Technical Details: Fgjdpoy N R N Uofx Aa Neb Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: used, Year of construction: 2017, Lot consists of: (1) Injection molding machine, Handling: Wittmann | W842PRO-0111 | 2017 Temperature control: HB Therm | HB-100 Z1 | 2017 Dryer: Somos | RDM 100 | 2021 Miscellaneous: 1x Conveyor Belt Fgjdpfoy N R I Dox Aa Nob Technical Details: Power supply voltage (V): 400 Frequency (Hz): 50 Weight (t): 26.8

Condition: used, Year of construction: 2003, (1) Injection molding machine, Handling: Wittmann | W621 | 2003 Temperature control: HB Therm | HB-100 Z1 | 2013 Miscellaneous: 1x Protective Enclosure 1x Conveyor belt 1x Hot Runner Controller, Mold Masters 1x Conveyor unit, Motan Technical Details: Power supply: 3x400 V Frequency (Hz): 50 Current 1 (A): 189 Current 2 (A): 152 Current 3 (A): 37 Weight (t): 10.1 Pressure (bar): 190 Flow rate (l/min): 206 Fgedpfxsy N R Iqj Aa Nob

Condition: used, Year of construction: 2014, Lot consists of: (1) Injection molding machine, temperature control: HB Therm | Miscellaneous: 1x conveyor unit by Motan Technical Details: Power supply: AC400V 3P/N/PE Frequency (Hz): 50 Current (A): 228 Installed power (kW): 137 Motor power (kW): 63.5 Heating power (kW): 33 Short-circuit rating (kA): 25 Screw diameter (mm): 65 Injection unit: 2230 Machine weight (t): 22.0 Fsdpey N R Htjfx Aa Nogb

Condition: ready for operation (used), Year of construction: 2002, clamping force: 4,200 kN, screw diameter: 70 mm, Hydraulic injection moulding machine manufactured in 2002. This DEMAG 420/810 - 2300 features a clamping force of 420 tons and a maximum mold height of 1530 mm. It has a screw diameter of 70 mm and a shot volume of 1090 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG 420/810 - 2300 machine we have for sale. Contact us for further details. • Tie bar spacing (W × H): 810 × 710 mm • Magnetic clamping: No • Min. platen size (W × H): 380 • Min. mold height: 820 mm • Max. mold height: 1530 mm • Max. distance between platens: 1530 • Max. weight of moving mold half: 2200 kg • Centering ring diameter/height: 160 × 15 • Sprue bushing radius: R19 • Ejector coupling thread diameter: M24 • Shot volume: 1090 cm³ • Hot runners: 8 • Cascades air (number): 6 • Cascades hydraulics (number): 6 • Hydraulic core pulls: 2 • Capacity oil fillings: 730 • Power supply: 217 A • Power input: 127.5 kW Additional equipment • Robot: Demag, year of manufacture 2002 Fedpfx Aajy Nyfle Njgb

Condition: used, Year of construction: 2010, operating hours: 55,000 h, clamping force: 110 kN, displacement volume: 113 cm³, injection pressure: 2,543 bar, overall weight: 7,200 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Fjdpjy Ntl Ssfx Aa Negb terms of payment: 100% prior to delivery

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, displacement volume: 393 cm³, Clamping force 1600 kN Mould opening force, max. 87 kN Travel force movable platen opening 45 kN Travel force movable platen closing 38 kN Size of mould platens (h x v) 820 x 845 mm Distance between tie bars (h x v) 520 x 520 mm Mould opening stroke 650 mm Mould height min 300 mm Max. daylight 950 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 393 ccm Shot weight (PS) 358 gr. Injection rate 177 ccm/s Screw speed 265 1/min Plasticising rate max. 36,2 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 22 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 489 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,00 x 2,20 m Total machine weight 8200 kg Max. mould weight 1862 kg Fedpfx Aasy Nlb Se Njgb Accessories: - Anti vibration pads - Servomotor Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - Interface for robot according to Euromap 67 - 8 x hotrunner controller

Condition: ready for operation (used), Year of construction: 2002, operating hours: 66,160 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 60 mm, displacement volume: 679 cm³, Injection unit: Screw diameter 60 mm Ls/D ratio 21 Injection pressure 2000 bar Stroke volume 679 ccm Shot weight (PS) 618 gr. Injection rate 325 ccm/s Screw speed 259 1/min Plasticising rate max. 58 g/s Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Installed heating capacity 23 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Fgodpfxey Nk Uqs Aa Njb Accessories: - Anti vibration pads - 10-fold water flow regulator Additional Options: - 1 x Air valve - 3 x Core pulls - 4 x hotrunner controllers - Robot interface according to Euromap 67

Condition: ready for operation (used), Year of construction: 1999, operating hours: 57,830 h, functionality: fully functional, clamping force: 3,000 kN, screw diameter: 70 mm, displacement volume: 1,047 cm³, Clamping force 3000 kN Mould opening force, max. 160 kN Travel force movable platen opening 86 kN Travel force movable platen closing 68 kN Size of mould platens (h x v) 995 x 1050 mm Distance between tie bars (h x v) 630 x 630 mm Mould opening stroke 820 mm Mould height min 330 mm Max. daylight 1150 mm Hydraulic ejector - stroke 200 mm Ejector force 58 kN Injection unit: Screw diameter 70 mm Ls/D ratio 20 Injection pressure 1778 bar Stroke volume 1047 ccm Shot weight (PS) 953 gr. Injection rate 400 ccm/s Screw speed 218 1/min Plasticising rate max. 75 g/s Nozzle pressure 82 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 55 kW Installed heating capacity 35 kW Adjustable barrel heating zones 6 Reservoir capacity 720 ltr. Dimensions and weights: Dimensions of the machine ca. 6,20 x 2,20 x 2,40 m Total machine weight 12500 kg Max. mould weight 3430 kg Accessories: Fedpfx Aey Nk Taja Nogb - Anti vibration pads Additional Options: - 1 x Air valve - 3 x Core pulls - Robot interface according to Euromap 12

Condition: ready for operation (used), Year of construction: 2021, clamping force: 1,600 kN, screw diameter: 30 mm, injection weight: 97 g, Hydraulic injection moulding machine manufactured in 2021. This Arburg ALLROUNDER 570 S 1600 - 290 features a maximum clamping force of 1600 kN and a screw diameter of 30 mm. It has a calculated stroke volume of 106 cm³ and a shot capacity of 97 g/PS. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 570 S 1600 - 290 machine we have for sale. Contact us for further details. • Distance between tie bars: 570 mm • Injection unit (EUROMAP): 290 • Calculated stroke volume: 106 cm³ • Max. injection pressure: 2500 bar • Minimum mould installation height: 450 mm • Operating hours: 3,159 (automatic) • Voltage range (AES system): 380–480 V • Frequency: 50–60 Hz • Feed hopper capacity: 50 l • Max. permissible temperature (cooling): 140 °C • Air blow unit flow: 1000 l/min • Socket combination: 16 A with 1× CEE and 1× Schuko Fjdpfsy Nkqrex Aa Nogb

Condition: excellent (used), Year of construction: 2013, screw diameter: 22 mm, injection pressure: 2,000 bar, injection weight: 31 g, Arburg 270C 400-70 Golden Edition Clamping force: 40 t Year of manufacture: 2013 Injection weight: 31 g Injection unit: .../70 Screw diameter: 22 mm Specific injection pressure: 2000 bar Injection volume: 34 ccm Injection weight: 31 g Clamping system: 400/... Clamping force: 40 t Platen dimensions: 446 x 446 mm Mould height: 200 mm Opening stroke: 350 mm Max. platen distance: 550 mm Ejector stroke: 125 mm Fgedpey I Uzxofx Aa Neb General data: Control system: Selogica Equipment: 2 x pneumatic valves 2 x hydraulic cores Multilift robot 3 hot runner zones Rotameter

Condition: good (used), Year of construction: 2002, Krauss Maffei KM 420-2700 C2 Injection Moulding Machine Basic Data • Manufacturer: Krauss Maffei • Model: KM 420-2700 C2 • Year of manufacture: 2002 • Serial number: 424227 Clamping Unit • Clamping force: 4200 kN (420 tons) • Mounting platen dimensions (HxV): 1270 x 1200 mm • Tie bar clearance (HxV): 800 x 800 mm • Min. mould height: 380 mm • Max. mould height: 1020 mm • Maximum opening stroke: 1400 mm Injection Unit • Screw diameter: 80 mm • Injection volume: 1433 cm³ • Shot weight: 1304 g (PS) • Maximum injection pressure: 1829 bar • Maximum temperature: 375°C Electrical and Hydraulic System • Power supply: 400 V Fgsdpoy I Tq Eefx Aa Njb • Phases: 3~ • Frequency: 50 Hz • Total current consumption: 237 A • Fuse protection: 250 A • Pump motor power: 75 kW • Heater power: 36 kW Dimensions and Weight • Machine weight: approx. 22,000 kg • Dimensions (L x W x H): 7.06 x 2.33 x 2.51 m

Condition: used, Year of construction: 2018, Serial no. 221903, control system, manufacturer Engel, type CC300, clamping force 400 t, installation height 450 - 950 mm, platen spacing 1,450 mm, 8 cascade valves, 24 hot runner zones, hydraulic core pulls 2 (DS) / 4 (AS), screw diameter 60 mm, shot weight 750 g, operating hours 30,738, machine weight 24,100 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 8, 2x 4-circuit block modules 125 °C, visualization unit, part removal handling, manufacturer Engel, type Viper 20 EP8, year 2018, serial no. 221917, part enclosure, belt discharge conveyor, manufacturer Engel, type FL4600 B600HLI, year 2018, serial no. 2101471, external temperature control unit and material dosing system not included in the offer. Fgedpfx Aoy I Rxmoa Nob

Condition: like new (used), Year of construction: 2023, operating hours: 1,900 h, clamping force: 1,600 kN, screw diameter: 105 mm, clearance between the columns: 1,87,01,420 mm, displacement volume: 4,546 cm³, total length: 13 mm, total width: 4 mm, total height: 3 mm, overall weight: 83 kg, pressure: 1,778 bar, 8 hot runner channels 16 sequential pneumatic valves 2 air blowers Fgedpfsy I Apqjx Aa Njb SERVO PUMP PC MC6 WEIGHT 83T DISTANCE BETWEEN PLATENS 3400MM

Condition: used, Year of construction: 2017, functionality: fully functional, Operational Haitian MA3800 - MA2500 - MA2000 - MA1600 injection moulding machines Fgjdjy Iydxopfx Aa Neb

Condition: good (used), Year of construction: 2016, Ref. no.: 18657 Hersteller: ENGEL Type: e-victory 440/160 CC300 ecodrive Year of construction: 2016 Clamping unit Clamping force: 160 ton Opening stroke: 900 mm Mould height min.: 300 mm Mould height max.: 600 mm Platen size (h x v): 750 X 750 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 151 g Injection pressure: 2400 bar Measurements and weight Dimensions: 5,7 X 1,8 X 2,2 m Machine weight: 10200 kg Further information: Tie-bar-less + electric injection = maximum flexibility and precision ENGEL e-victory 440/160: 👉 This is a hybrid machine (servo-hydraulic + electric) ⸻ 🔍 How it works ✔ Electric part: * Injection unit (screw movement) * Ensures very high precision and process stability ✔ Hydraulic part: * Clamping unit (mould closing) * Maintains clamping force efficiently without continuous energy consumption 👉 This system combines: * The precision of an all-electric machine * With the power and efficiency of a hydraulic system This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design. The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing. Key features: * Tie-bar-less design for maximum mould flexibility * Servo-hydraulic drive for high energy efficiency * Precise and stable processing performance * Compact footprint with a large mould installation area * Modern ENGEL control system The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures. Fodpfx Aaoy Ipgpe Nsgb Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 21,000 h, clamping force: 1,270 kN, total width: 1,500 mm, total height: 1,700 mm, overall weight: 5,300 kg, product length (max.): 5,100 mm, This 3-axis SHIBAURA EC130SXIII-4A was manufactured in 2019. It features a clamping force of 1270 kN and a mold opening stroke of 400 mm. The machine has a maximum distance between platens of 950 mm and platen dimensions of 720 x 670 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC130SXIII-4A electrical injection moulding machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 510 x 460 mm • Platen dimensions (H x V): 720 x 670 mm Fjdpoy Iffnsfx Aa Negb • Mold opening stroke: 400 mm • Max. distance between platens: 950 mm • Mold height (min–max): 180–550 mm • Ejection force: 30 kN (3.0 tf) • Ejection stroke: 90 mm • Injection unit code: 14 • Nozzle touch force: 17.7 kN (1.8 tf) • Injection speed (standard): 300 mm/s • Injection speed (high torque): 200 mm/s • Injection speed (high speed): 400 mm/s • Main breaker capacity (standard/high torque): 100 A • Main breaker capacity (high speed): 125 A • Transformer (standard): 75 kVA

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,000 h, clamping force: 2,250 kN, screw diameter: 55 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 9,900 kg, product length (max.): 6,400 mm, This 3-axis SHIBAURA EC230SXIII-8A was manufactured in 2020. It features a clamping force of 2250 kN and a mold opening stroke of 550 mm. The machine has a maximum distance between platens of 1230 mm and a screw diameter of 45 / 50 / 55 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC230SXIII-8A electrical injection moulding machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 610 x 560 mm • Platen dimensions (H x V): 880 x 830 mm • Mold opening stroke: 550 mm • Max. distance between platens: 1230 mm Fedpfx Aasy Ifcte Negb • Mold height (min–max): 250–680 mm • Ejection force: 49 kN (5.0 tf) • Ejection stroke: 130 mm • Injection unit code: 18 • Screw diameter: 45 / 50 / 55 mm • Max. injection capacity: 318 / 392 / 475 cm³ • Injection weight (PS): 292 / 361 / 437 g • Injection weight (PE): 232 / 286 / 346 g • Max. injection pressure: 247 / 200 / 165 MPa • Max. holding pressure: 247 / 200 / 165 MPa • Nozzle support force: 29.4 kN (3.0 tf) • Main breaker capacity (STD/High Torque): 125 A • Main breaker capacity (High Speed): 175 A • Transformer (STD): 75 kVA • Heating power: 15.2 / 16 kW