Condition: used, Year of construction: 2010, functionality: unexamined, machine/vehicle number: 32003375, type of input current: three-phase, type of cooling: air, overall weight: 2,320 kg, input voltage: 400 V, total width: 2,220 mm, total length: 4,110 mm, total height: 2,150 mm, input frequency: 50 Hz, Climaveneta NECS/Q/B 0904 multi-purpose unit, air-to-water, air-cooled condenser, for simultaneous chilled and hot water production in a 4-pipe system. Year of manufacture: 2010. Serial number: 32003375. Cooling capacity: approximately 211 kW. Heating capacity: 234.2 kW. Power consumption in cooling mode: 85.23 kW; maximum electrical power as indicated in the documentation: 107.8 kW. Four scroll compressors, two refrigeration circuits, R410A refrigerant (charge indicated on the nameplate: 2 × 35 kg). Power supply: 400 V, three-phase, 50 Hz. Approximate dimensions (L × W × H): 4,110 × 2,220 × 2,150 mm. Weight as indicated on the nameplate: 2,320 kg. Exact operating hours not recorded. Condition: used equipment, already disassembled and stored in Covelas, Trofa. It was operational before disassembly, but without reaching full capacity and requiring maintenance. In circuit 1, an internal leak was identified in the expansion valve and an abnormal noise in the four-way valve. In circuit 2, the suction transducer is defective. Under current conditions, it is not possible to perform a load test. Some photographs show the equipment before disassembly; others show its current state in the warehouse. Visits by appointment only. Collection, lifting equipment, loading, and transportation are the responsibility of the buyer. Ijdpsz Hqrlefx Agysbc

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 25 kW (33.99 HP), cooling capacity: 25 kW (33.99 HP), type of cooling: air, Set of 2 chilled water production type air conditioning units (chillers) with their 2 air handling units (AHUs), pipes, and fittings. Ijdjz Rvh Ijpfx Agyebc Capacity: 25 kW Reversible (heating/cooling) 2 sets available (2 chillers + 4 AHUs) Available for immediate delivery.

Condition: used, Year of construction: 2016, functionality: fully functional, Equipment: cooling unit, fridge, Five Star Refrigeration water-cooled chillers with 5 cooling towers Industrial chilled-water packages by Star Refrigeration Ltd, Glasgow. Contract 100663, installed 2016. Five chillers in stock. Six cooling towers available with the set or separately. Price on request. Each chiller is a packaged R134a plant on a steel skid: three semi-hermetic compressors, shell-and-tube chilled-water evaporator, oil separator, SMES control panel and gas detection. Specification per chiller. Iodezz Rfqepfx Agysbc Manufacturer: Star Refrigeration, Thornliebank Industrial Estate, Glasgow G46 8JW Refrigerant: R134a Charge: 840 kg Maximum allowable pressure: 18.0 barg high side / 17.2 barg low side Year of installation: 2016 Supply: 400 V, 3 phase, 50 Hz Control voltage: 110 V Control panel: SMES CE marked Compressors Three semi-hermetic compressors per machine, numbered 1–3, each with oil separator and terminal box. Refrigerant lines tagged R134a. Evaporator Stanref International shell-and-tube, model FEV3021/715, built October 2015, dry weight 2,200 kg. Shell: R134a, 570 litres, design 17.2 bar. Tubes: chilled water, 430 litres, design 10 bar. Connections labelled CHILLED WATER. Electrics SMES cabinet with controller, start/stop and emergency stop. Electronic Devices Ltd gas detector ED 811 (ATEX). Schneider Electric isolator 415 V, 250 A, type SQB7200L. Siemens motor 400/690 V, 50 Hz, IP55. Cooling towers Six towers in stock. Offered with the five chillers as a complete heat-rejection set, or as a separate lot. Used industrial plant. Sale: one chiller, all five, towers only, or 5 chillers + 6 towers. The five chillers come from one contract, so voltage, refrigerant, charge and layout match across the lot. Take a single machine for spare duty or take all five for a plant room. The six towers close the water-cooled circuit if you need heat rejection on the new site.

Condition: used, Year of construction: 2015, operating hours: 30,631 h, functionality: fully functional, machine/vehicle number: X658622, cooling capacity: 57 kW (77.50 HP), type of input current: three-phase, type of cooling: air, input voltage: 400 V, pressure: 44.5 bar, Equipment: type plate available, Chiller, Trane CGAM 020 model, with protective screen. Ibjdpfx Aozi Aacogysc

Condition: used, Year of construction: 2016, functionality: fully functional, BAC VXC S455 evaporative condenser, R134a, s/n H150832701 — chiller heat rejection. Used 6 units Baltimore Aircoil International (BAC) VXC S455 evaporative condenser, built 2015, serial number H150832701. Made in Heist-op-den-Berg, Belgium. It is an evaporative condenser: hot refrigerant vapour enters the coils inside the unit, water is sprayed over the coil surface, and centrifugal fans draw air through the pack. The refrigerant condenses and returns to the refrigeration plant. No separate water-cooled condenser is required on the chiller. The unit has twin R134a heat-exchanger coils (circuits A and B) and a centrifugal fan section. It was installed on a rooftop as the heat-rejection side of a refrigeration / chilled-water plant. Manufacturer: Baltimore Aircoil International nv Model: VXC S455 Serial number: H150832701 Year of manufacture: 2015 Ibedpszz Sidjfx Agyjc Type: induced-draft evaporative condenser Vessel type code: PED C100 Refrigerant: R134a Coil volume: 932 L per coil (A and B) Design pressure: −1 / 23 bar Test pressure: 34 bar Design temperature: −20 / +120 °C Fan overall efficiency (nameplate): 59.05% Marking: CE BAC catalogue figures for VXC S455 Base heat rejection: approx. 1,961 kW Operating weight: approx. 11,270 kg Shipping weight: approx. 8,125 kg Dimensions: approx. 5,385 × 2,397 × 4,248 mm Air flow: approx. 34.9 m³/s Fan motor: 1 × 30 kW Spray water: approx. 38.5 l/s, pump 1 × 4 kW Application Heat rejection for industrial chillers and refrigeration plants on R134a. A natural match for the Star Refrigeration package water chillers (contract 100663, 840 kg R134a charge): discharge gas goes to the BAC coils, liquid returns to the chiller. Condition and sale Used industrial equipment, removed / being removed from site. Price on request. Can be sold with the Star chillers or as a standalone condenser. Model, serial number and pressures are taken from the factory plates; actual capacity at the new site depends on condensing temperature and ambient wet bulb.

Condition: ready for operation (used), Year of construction: 2020, overall weight: 564 kg, fuel type: electric, total length: 2,346 mm, total width: 1,285 mm, total height: 1,747 mm, cooling capacity: 25 kW (33.99 HP), heating capacity: 50 kW (67.98 HP), type of cooling: water, 2 Chilled Water Production Units Reversible – Variable power output: 25 or 50 kW Equipped with transport chassis Ibedez Rvr Hspfx Agysc Never used – Available for immediate delivery For sale individually, two identical units available.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Equipment: freezer, lighting, Freezer AHT MIAMI 250 AD (-) / (U) R290 Used machine - very good condition. AD - semi-automatic device de-icing REFRIGERANT - R290 Year of construction: 2016-2019 Cooling: + 3 ° C to + 15 ° C Freezing: -18 ° C to -23 ° C Brilliant AHT LED interior lighting for an even more attractive product presentation Special feature: ready to plug in Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Ijdpfx Asz Aaizsgyobc Our contact details can be found under the legal information of the seller. Payment in cash, possible upon delivery on site. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. Please contact us before purchasing. We issue intra-community invoices - excluding VAT. opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: ready for operation (used), Year of construction: 2023, operating hours: 8,163 h, functionality: fully functional, type of cooling: water, overall weight: 5,052 kg, input voltage: 400 V, total width: 2,200 mm, total length: 7,140 mm, total height: 2,526 mm, input frequency: 50 Hz, Equipment: fridge, type plate available, 1. Trane water chiller, CXAF190SE SN, 628 kW, with heat pump. Ibedpfx Agjz D Tkljyoc Refrigerant: R454B, year 2023, Series: Sintesis Avantage, absorbed power 227 kW, with 2 Grundfoss recirculation pumps, 12 axial fans, and 6 scroll compressors, plate heat exchanger. Dimensions: 7140x2200x2526 mm (height), weight: 5052 kg. Equipment has been inspected. Reference: 1211.

Condition: excellent (used), Year of construction: 2012, operating hours: 7,000 h, functionality: fully functional, machine/vehicle number: 2522105, overall weight: 8,000 kg, total length: 4,000 mm, total width: 210 mm, total height: 2,000 mm, ambient temperature (min.): 35 °C, ambient temperature (max.): 35 °C, Mayekawa (MYCOM) N2520LMC-LBM – 490 kW, NH₃, two-stage compressor – only 7000 hours For sale: a Mayekawa (MYCOM) N2520LMC-LBM two-stage compressor, designed for industrial ammonia (NH₃) refrigeration systems. The unit has only operated for approximately 7000 hours. It comes complete with a control cabinet and a Danfoss soft starter. The system is equipped with thermosyphon cooling. Key specifications: Manufacturer: Mayekawa (MYCOM) Model: N2520LMC-LBM Type: two-stage compressor Refrigerant: ammonia (NH₃) Refrigeration capacity: 490 kW Oil cooler capacity: 179 kW Operating parameters: -40°C / +35°C Operating hours: only approximately 7000 hours Cooling: thermosyphon Control cabinet: included Soft starter: Danfoss – included Isdpfxezudabo Agyebc Drive power: the attached documentation shows a drive with a rated power of 315 kW. Advantages of a two-stage compressor: Two-stage compression is particularly beneficial at low evaporation temperatures and high compression ratios. • High efficiency at low temperatures – this solution works very well at temperatures around -40°C. • High refrigeration capacity – 490 kW – the compressor can be used in large, industrial refrigeration systems. • Improved compressor operating conditions – compression takes place in two stages, which means that the individual stages are less stressed than in a single-stage system with a similar total compression ratio. • Lower discharge temperature – two-stage compression allows the discharge temperature to be reduced, which has a positive effect on the system's operation and durability. • Good energy efficiency at high compression – particularly important in systems operating at low temperatures. • Ideal for industrial refrigeration – including freezers, cold rooms, food processing plants, cold storage warehouses, and technological installations. Included: The set for sale includes: Mayekawa (MYCOM) N2520LMC-LBM compressor, control cabinet, Danfoss soft starter, oil cooling system using a thermosyphon. Only 7000 operating hours: One of the biggest advantages of the unit is its very low operating time – approximately 7000 hours. The compressor offers 490 kW of refrigeration capacity and is ready to operate with NH₃ in demanding industrial conditions. Mayekawa (MYCOM) N2520LMC-LBM | 490 kW | NH₃ | -40/+35°C | 7000 hours | thermosyphon cooling | oil cooler 179 kW | control cabinet | Danfoss soft starter Please contact me for details, technical documentation, photos, and the possibility to view the unit.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 400 h, functionality: fully functional, power: 30 kW (40.79 HP), overall weight: 341 kg, total length: 1,400 mm, total width: 2,650 mm, total height: 2,150 mm, cooling capacity: 25 kW (33.99 HP), noise level: 76 dB, type of cooling: water, Chilled water production unit Brand: ICS Cool – Model: IC408 Ibedpfxoz Ru Ugs Agyoc Mounted on a mobile chassis Available for immediate delivery

Condition: ready for operation (used), Year of construction: 2019, operating hours: 500 h, Proven and reliable equipment, the Clim 10 or 20 HP is well-suited for temporary air conditioning (cooling and heating) of large spaces. It has been specifically designed and developed to operate completely independently without a water circuit. It can be installed with the same efficiency either inside or outside the areas to be treated. Its integrated control module automatically manages the thermal regulation of the areas based on the entered parameters. 20 HP Model: Powered by 380 V three-phase power. 5 air conditioners available for this model. Ibodpfxoz Rv Smj Agyoc Usage: between 4,000 and 7,000 hours depending on the machine. Unit price: €4,550 (excluding VAT). 10 HP Model: 220 V single-phase power. 5 air conditioners available for this model. Usage: between 500 and 2,000 hours depending on the machine. Unit price: €3,540 (excluding VAT).

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a complete industrial RITTAL TopTherm switchgear cooling system, consisting of a central RITTAL chiller/cooling unit and a total of 16 RITTAL air/water heat exchangers. The system comes from an industrial production facility and was used for the central cooling of several switchgear cabinets. The entire system was in trouble-free operation until it was professionally dismantled. RITTAL Chiller / Cooling Unit Manufacturer: RITTAL GmbH & Co. KG Type: SK 3336.459 Design: KRAE0200TT00V480EF Year of manufacture: 2020 Date of manufacture: 07/15/2020 Serial number: 2020K000069533 Technical data: Nominal cooling capacity: 24,400 W / 24.4 kW Operating voltage: 3 × 400 V / 50 Hz Max. current: 22.3 A Starting current: 111.7 A Max. power consumption: 11,330 W Ibedpszwaa Ajfx Agyjc Refrigerant: R410A Tank volume: 78 liters Temperature range: -20 to +43 °C Noise level: 76 dB(A) Protection class: IP44 Weight: 326 kg 16 RITTAL Air/Water Heat Exchangers The scope of delivery includes a total of: 10 × RITTAL TopTherm SK 3210.500 Air/Water Heat Exchanger Useful cooling capacity: 4.0 kW Operating voltage: 230 V Cooling medium: Water Protection class: IP55 6 × RITTAL TopTherm SK 3209.500 Air/Water Heat Exchanger Useful cooling capacity: 2.5 kW Operating voltage: 230 V Water flow rate: 400 l/h Cooling medium: Water Protection class: IP55 Weight: approx. 23.5 kg The heat exchangers were mounted on the respective switchgear cabinets and supplied with cooling water via the central RITTAL cooling unit. Scope of delivery: 1 × RITTAL TopTherm Chiller SK 3336.459, 24.4 kW 10 × RITTAL Air/Water Heat Exchanger SK 3210.500 6 × RITTAL Air/Water Heat Exchanger SK 3209.500 Existing cooling water pipes and hoses Existing connection fittings and connecting parts Other existing installation and connection accessories as shown in the pictures This offers a largely complete central switchgear cooling system with a total of 16 cooling points. The components come from a professionally installed industrial system, manufactured in 2020. The condition is used; minor optical signs of wear or damage to individual plastic covers can be seen in the pictures. Inspection is possible by appointment. The complete system is preferred for sale. Price: €14,900 net, negotiable Subject to prior sale and errors in the technical data. Technical data according to nameplates and available manufacturer documents.

Condition: used, Year of construction: 2014, functionality: fully functional, Güntner Axial Fan Condenser. Also suitable for water cooling. Other sizes of vertical and horizontal condensers are also available (also suitable for water cooling, pictures can be found in the ad). Located in Vacegres, Hungary (EU). Isdpfxjygyd Ij Agyebc

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Ibodpfjykrtpex Agyoc Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, cooling capacity: 10 kW (13.60 HP), overall weight: 340 kg, total height: 1,780 mm, total length: 1,495 mm, total width: 750 mm, Proven technology, the Clim 10 or 20 HP is well suited for temporary air conditioning (cooling and heating) of large spaces. Ibsdez Rv N Sopfx Agyoc It has been specifically designed and developed to operate completely independently, without a water circuit. It can be installed with the same efficiency inside or outside the areas to be treated. Its integrated control module automatically manages the thermal regulation of the areas based on the entered parameters. On wheels with brake + forklift access for transport. With plenum. Clim 20 HP: powered by 380 V three-phase power. 10 units available for this model. Unit price: €3,480 (excluding VAT). Clim 10 HP: powered by 230 V. 10 units available for this model. Unit price: €1,860 (excluding VAT).

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, power: 20 kW (27.19 HP), Air distribution unit for air conditioner, Enviromax CTA Power: 20 or 40 kW Reversible: Heating/Cooling 4 units available Ibsdpfxez Rvi Se Agyec Can be purchased as a package with a chilled water production unit (PEG); see separate listing.

Condition: good (used), Year of construction: 1999, Nema NCG 4390 S Temperature Shock Chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Temperature Range: -40 °C to +180 °C Dew Point Range: +5 °C to +89 °C Supply Voltage: 400 V Rated Current: 32 A Rated Power: 15 kW Refrigerant: R 404 A Year of Manufacture: 1999 Weight: 2720 kg External Dimensions: W 3950 x D 1700 x H 2280 mm Internal Dimensions: W 3000 x D 1300 x H 1170 mm WLG STEAM-O-MAT Electrically-controlled automatic steam humidifier and generator for mineral- and odor-free steam Ibsdpfx Aouzgt Eogyec Manufacturer: WLG STEAM-O-MAT Type: EDB 8 Heating Voltage: 400 V Power: 6 kW Steam Output: 8 kg/h Water-cooled Condenser Manufacturer: Bitzer Water-cooled Supply Voltage: 400 V Rated Current: 13 A Rated Power: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2019, Heck DVAS 180 Refrigeration Unit, 180 kW Professional, industrial refrigeration unit from the premium manufacturer HECK Kältetechnik GmbH. The unit is in very good condition for its age and has been reliably used until recently. Thanks to the modern refrigerant R513A, the unit is future-proof and meets current environmental and efficiency standards. Production cooling with heat recovery Technical data (according to the nameplate): Manufacturer: HECK Kältetechnik GmbH Model / Type: DVAS 180 Machine No.: T-19307 Year of manufacture: 2019 Refrigerant: R513A (Max. filling weight: 98 kg) Operating voltage: 400 V / 50 Hz Operating current: 85.4 A (Max. operating current: 141 A) Max. operating pressure: ND 19 bar / HD 28 bar CE certified: Yes (Number 0036) Performance data & application area Refrigeration capacity: 180 kW – Ideal for efficient cooling of large halls or commercial areas. Heating capacity: 290 kW – Highly efficient air heating through clever use of waste heat from the refrigeration cycle. Dehumidification capacity: approx. 100 liters per hour – Perfect for precise humidity control. Application areas: Due to these combined performance data, the unit is ideally suited for industrial production halls, large warehouses, logistics centers, or for demanding process cooling and commercial dehumidification. The following precise operating temperatures can be derived from the technical specifications and design data in the documentation for the Heck DVAS 180: 1. Refrigeration core area Evaporation temperature: The unit is designed for an evaporation temperature of 6 °C. Condensation temperature (liquefaction): The water-cooled plate condenser operates at a condensation temperature of 43 °C. 2. Air-side temperature ranges (process air) Depending on which ventilation or unit (e.g., cabin, cooling zone, or ADZ unit) is used, the air inlet and outlet temperatures vary: Standard cooling zone: Air inlet at 26.5 °C is cooled down to an air outlet temperature of 19 °C. Cabin air conditioning (ULA): Air inlet at 26 °C is conditioned to an air outlet temperature of 22 °C. Process air dehumidification (ADZ): The air enters at 26 °C and leaves the evaporator strongly dehumidified at 10.3 °C. Ijdpfjzrlzzox Agyobc Reheating (ADZ unit): A water-cooled reheater can raise the cooled air from 10 °C back to 17.5 °C. 3. Water-side temperature ranges (cooling water / heat recovery) Plate condenser (condenser cooling): Is designed for a water inlet of 32 °C and a water outlet of 38 °C (at a flow rate of 35 m³/h). Plate heat exchanger (heat recovery): Uses the hot gas energy to heat water from 42 °C to 47 °C. "One-stop shop: We would be happy to offer you suitable bank financing for your project." More articles - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Bitzer Bitzer refrigeration unit S6F-30.2Y-40P with RO system & soundproofing capsule – unused Description: For sale is a high-quality Bitzer refrigeration unit on a base frame, consisting of a compressor, water-cooled condenser, soundproofing capsule, and a reverse osmosis system including a humidifier. The unit has been assembled but never put into operation. Ideal for industrial, laboratory, or special applications. Technical data – refrigeration unit Manufacturer: Bitzer Compressor: S6F-30.2Y-40P Condenser: Bitzer K573H, water-cooled Refrigerant: R452A Electrical data: Supply voltage: 400 V / 3-phase / 50 Hz Max. operating current: 53 A Starting current (rotor blocked): 135 A with star connection / 220 A with direct start (YY) Max. power consumption: 30.1 kW Motor power: 22 kW (30 hp) Flow rate: High pressure (HD): 101.1 m³/h Medium pressure (MD): 50.5 m³/h Oil: Oil type: BSE32 Option: BSE55 (for R134a, tc > 70 °C) Oil volume: 4.75 l Reverse osmosis system Type: RO20 (Werner / WeteA) Permeate output: 10 l/h Feed water requirement: 40 l/h Operating pressure: 14 bar Dimensions: 500 × 600 × 295 mm (H × W × D) Soundproofing capsule Height: 2200 mm Width: 2400 mm Depth: 1200 mm Dimensions & weight (approx.) Complete unit including capsule: (W × D × H) approx. 2400 × 1200 × 2200 mm Ibsdpfozd Rttex Agyoc Total weight: approx. 900–1,100 kg (compressor + condenser + base frame + capsule + RO system) Condition: used Scope of delivery: (See image) Refrigeration unit on base frame Bitzer compressor Water-cooled condenser Soundproofing capsule Reverse osmosis system including humidifier (Changes and errors in technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, HUBER Water-cooled recirculating chiller Huber Unichiller 060Tw High-performance process chiller with Pilot ONE touchscreen control For sale is a used water-cooled recirculating chiller from Peter Huber Kältemaschinenbau. The unit is suitable for the precise temperature control and cooling of machines, technical equipment, laboratory applications, chemical processes, and industrial process circuits. Technical data: Manufacturer: Peter Huber Kältemaschinenbau GmbH Model: Unichiller 060Tw Type of unit: Water-cooled recirculating chiller Temperature range: -20 to +40 °C Cooling capacity: at +15 °C: 6.0 kW at 0 °C: 5.0 kW at -10 °C: 3.1 kW at -20 °C: 1.7 kW Temperature stability at -10 °C: 0.5 K Internal temperature sensor: Pt100 Connection for external sensor: Pt100 Safety class: I / NFL Protection class: IP20 Dimensions: approx. 600 × 600 × 1450 mm (W × D × H) Weight: approx. 213 kg net Mains connection: 460 V / 3 Ph / 60 Hz Max. power consumption: 10 A Fuse rating: 3 × 16 A Refrigerant: R507 Refrigerant quantity: 1.2 kg Max. pressure: 25 bar CFC and HCFC-free Circulation pump: Pump type: C3 Isdpfjzui Uqex Agysbc Max. flow rate: 122 l/min Max. pump pressure: 5.6 bar Pump connection: G1 1/4 AG Cooling water: Cooling water connection: G1/2 AG Min. cooling water differential pressure: 1 bar Max. cooling water pressure: 6 bar Cooling water consumption at 15 °C cooling water: Supply +15 °C: approx. 330 l/h Supply 0 °C: approx. 230 l/h Supply -10 °C: approx. 152 l/h Supply -20 °C: approx. 70 l/h Min. filling volume: 5.9 l Expansion volume: 7.5 l Permissible ambient temperature: +5 to +40 °C Pilot ONE control: 5.7" color touchscreen Graphical temperature display Program generator / ramp functions Digital level indicator Multilingual menu navigation Interfaces: Ethernet USB Host / Device RS232 / Serial Pt100 connection for external temperature sensor Equipment: Water-cooled chiller C3 circulation pump Pilot ONE touchscreen controller 5.7" color display Digital level indicator Atmospheric open expansion tank Stainless steel housing Stainless steel circulation pump Copper-brazed evaporator Main switch RS232 interface USB interfaces Ethernet interface Pt100 connection Cooling water connections Process connections Castors Connection hoses as shown in the pictures Applications: Process cooling Machine cooling Laboratory applications Chemical processes Technical equipment Production equipment Cooling water supply Research and development Scope of supply: 1 × Huber Unichiller 060Tw recirculating chiller Connection hoses and accessories as shown in the pictures Condition: Used Unit can be switched on Pilot ONE touchscreen is functional and displays the operating menu Optical condition as shown in the pictures The table shown in the photos or other items not explicitly mentioned are not part of the sale. Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Year of construction: 2021, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 285 A, ambient temperature (min.): -10 °C, ambient temperature (max.): 120 °C, pressure: 25.5 bar, We offer these used Daikin EWAH330TZSRB1005 x 3, EWAD370T-SSC2001 air conditioning units, manufactured in 2021. Model: EWAH330TZSRB1005 Serial number: CH-21D00600-KKKKXX Refrigerant: R1234ze Refrigerant charge: 56 kg GWP: 7 tCO₂ equivalent: 0.4 Low-pressure: 15.5 bar High-pressure: 25.5 bar Temperature range: -10/120 °C High-pressure cut-out: 21 bar Water ingress protection: IPX4 Frequency: 3-50 Hz Voltage: 400 V Current: 285 A Contains fluorinated greenhouse gases: 3.546 kg Year of manufacture: 2021 Country of manufacture: Italy Three identical chillers. EWAD370T-SSC2001 R134a One chiller. The price is for all four units together and they are sold as a set. Ibodpfjz Ef H Ujx Agyec If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2017, functionality: unexamined, Riedel L24/26/23 TR5-P / 01.01G Ibodpfx Ajzln Rxjgyoc - Delivery possible for an additional charge.

Condition: used, Autotherm Type: Autotherm temperature control unit AWF 130-27/VK/6K 6-circuit temperature control unit Without active refrigeration unit! According to the enclosed technical brief: Temperature range: -40°C ... +85°C (extended temperature range -40°C…+130°C) Increased heating capacity: 27 kW instead of 18 kW Includes 1x temperature control in the main circuit Includes 6x temperature measurement in each supply line Includes 6x temperature measurement in each return line Includes 6x flow rate and pressure measurement in each supply line Includes 6x flow rate and pressure control 1 l/min .. 12 l/min and 0.1 bar … 3 bar Including changeover control Including frequency inverter-controlled pump in the main circuit Including 6x 3-way valve Includes 6x additional relief valve 2 … 12 bar, adjustable Preset to 2.4 bar Includes filling and draining device For all circuits, jointly/simultaneously Including 50-liter integrated tank Including pneumatic drain function Including S7 control system Energy saving and increased cooling capacity: An additional glycol circuit integrated into the temperature control circuit takes over the cooling of the consumer in a temperature range of +85°C to +30°C. The absorbed energy is transferred to the on-site Isdpfxozd Rtyj Agyjbc < 20°C chilled water network. The cooling capacity at a supply temperature of +20°C is: 50 kW. This increases the cooling speed in this temperature range and saves energy due to the shorter running time of the refrigerant compressor. (The footprint of the base unit increases by approx. 0.3 m² according to the data sheet). Assembly in Rittal modular enclosure: 2x TS8 800x1000x2000 mm 1x additional, separate enclosure, min. 600x600x2000 mm (for control/electrical components) Supplied via on-site or optional cooling medium supply. Supply temperature, on-site cooling fluid -43°C, cooling fluid requirement 7.5 m³/h, continuously regulated. For cooling capacity, a cooling medium must be connected! Weight approx. 1200 kg Sold ex-works! Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Lauda LAUDA Heat Transfer Unit ITH350/25kW – Industrial Temperature Control Unit For sale is a high-quality heat transfer unit from the LAUDA brand, model ITH350/25kW. Ideal for industrial applications, laboratories, or production processes that require precise temperature control. Special features: Robust construction, reliable for continuous operation Precise temperature control over a wide range Protection class IP54 – dust and splash water protected Technical data: Type: ITH350/25kW Article No.: LSI 51807 Supply voltage: 400 V / 3~ / PE / 50 Hz Power consumption: 28.5 kW Current consumption: 41 A Permissible temperature [TS]: +20°C … +350°C Protection class: IP 54 Heat transfer circuit: Medium: Marlotherm SH Minimum flow rate: 1 m³/h Nominal size: DN 25 Permissible max. operating pressure: 10 bar Weight: approx. 700 kg Condition: used Ibsdpfx Ajzii T Negyec Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Evaporator LUVE -Type: CS64H 3306GB 7SP.BAC.I Ibjdpfx Agoz Smlhsyec -Cooling capacity: approx. 40 kW at DT8K -Fin spinning: 7 mm -Fans: 2 x 630 mm -Dimensions: 3050 x 900 x 1100 mm -Place for electric defrost -Volume: 35 L -Quantity in stock: 2 -Reference number: CH 623 -Condition: Used in very good condition, evaporator 100% tight under nitrogen, fans working, ready to work