Gmb Eood

Condition: good (used), Year of construction: 2006, Functionality: fully functional, max. size 75 x 105 cm age 2006 die cutter computer control with touch screen max. 7.500 sheets / h (off-load) corrugated board up to approx. 4 mm Islhcowc Uzzscqtotf 2 sidelays - adjustable for pull or push operation 2 closing frames 2 set frame for stripping tools Nonstop device in feeder and delivery shown totalizer: approx. 28 mill. impressions operating hours 21.400 Delivery time: immediately

Condition: used, machine/vehicle number: 133999, A4 format Ijlhswc T Ndeccqtjtf 380V, 3-phase, 50Hz Catalogue

Condition: excellent (used), Year of construction: 1975, Functionality: fully functional, year of last overhaul: 2015, BOBST AUTOPLATINE SP1420E-600T Rebuilt in 2015 by CELMACCH Italy. MAX format: 1420x1020 MIN format: 700x500 Speed: 5000 sheets per hour. Machine in production, can be inspected in Bucharest, Romania. The buyer will take the responsibility for dismantling, packing and loading. Ijlhccswc Td Ijqtotf

Condition: good (used), machine/vehicle number: 56636, Format A3 380V, 3-phase, 50Hz Ielhjwbn Hujccqtstf

Condition: good (used), machine/vehicle number: 311822, Max format 40X57 3-phase, 380V, 50Hz Ielhcswbn Eqscqtjtf

Condition: good (used), Cauhe IVA 120×160 die-cutter The machine is fully functional, like new. Made in Spain. Format: 1200x1600mm Weight 10,000kg Power supply 380V Installed power 11 kW Impact force 2 Tm/dm2 Year of production 2015. Equipment: – pneumatic clutch and brake – control panel – quick assembly frame – 3 operating modes: continuous, with time delay, manual – central automatic lubrication – additional safety guards – operating tools Islhccswbnwmsqtotf – sheet metal for pressure

Condition: new, Die cutting machine TYMC-1200 with hot stamping The latest version, with a „honeycomb” plate with locks. The machine is designed for hot knife die-cutting and standard die-cutting without the need to remove the heating plate. Format: die cutting 1230x850mm hot stamping 1100x780mm Weight 6000 kg Operating speed 23 cycles/min Foil travel 1-820mm Operating temperature 1-150’C Power supply 380V Equipment: – electromagnetic clutch and brake – quick assembly frame – control panel with a touch PLC programmer – three independent foil pulling systems, controlled by stepper motors – 3 operating modes: continuous, time delay, manual – 6 heating plate sections, energy saving – central lubrication Itslhcewa Incocqtsf – additional safety covers – photocells – operating tools and instructions, CE declaration – sheet for pressure Machine available immediately 12-month warranty.

Condition: new, ML-1400 NXL die cutter The machine is brand new. It is the heaviest die cutter in this format. Format: 1400 × 1000 mm Weight: 6500 kg 380 V power supply Engine: 5.5 kW Working speed 15 +/- 2 cycles / min Equipment: – electromagnetic clutch and brake – quick assembly frame – 3 modes of operation: continuous, with time delay, manual – central lubrication – additional safety covers – service tools and instructions with CE documentation. The machine is available „immediately” We provide 12 months warranty. Our machines as few on the market are adapted to current regulations in EU. Itelhcjwa Im Secqtjf Possibility of testing in the showroom in Radom.

Condition: new, Die Cutting Machine ML-800 NXL The machine is brand new. It is the strongest machine on market, in this size. Ielhcewa Imxocqtjtf Format: 830 x 590 mm Weight: 2500 kg Power supply 380 V Engine: 3 kW Equipment: - Electromagnetic clutch and brake - Quick assembly frame - 3 modes: continuous, with time delay, manual - Central lubrication - additional safety cover - Tools and instructions with documentation CE. We provide installation and training. We provide a warranty of 12 months.

Condition: ready for operation (used), Year of construction: 1985, Bobst SP 102 CER - Perfect condition available immediately Year 1985 Max.Size: 1020x720 mm Min.Size: 400x350 mm Max.Speed: 8000 Sh/h Max. Cutting force: 250T Paper: min. 80 gr/qm Cardboard: max. 2000 gr/qm Centerline Feeder Non-Stop Itslhccowathheqtef Autom. Non-Stop with Sheet inserter Side guide Quick Lock system

Year of construction: 2001, Condition: used, machine/vehicle number: 15026, Format: 720 x 1040 mm The machine is a foil hot stamping machine, e.g., for holograms. It consists of a feeder, printing unit, and delivery unit (see photos). A total of 70 machines were built. The machine is currently fully functional with the new control system. The estimated cost to bring it into operation is approximately €150,000-200,000 (dismantling, transport, assembly, commissioning, training, documentation for the new control system). Ijlhccewabbveqtetf

Condition: used, Year of construction: 2004, Functionality: fully functional, Heidelberg Dymatrix 113 CSB Pro Machine type: Embossing and die-cutting system / Automatic sheet-fed die-cutting machine Machine number: 400018 Year of manufacture: 2004 Machine specifications Max. stroke rate per hour: 9000 cph Length without feeder: approx. 5190 mm Length with feeder: approx. 7770 mm Max. width: approx. 2400 mm Max. height: approx. 3200 mm Max. height with open feeder: approx. 3930 mm Weight without feeder: approx. 30400 kg Weight of feeder W4: approx. 3000 kg Inner clamping frame width: 820 x 1134 mm Max. die size: 816 x 1130 mm Largest cutting area: 800 x 1120 mm with Gripper edge Gripper edge adjustable from: Standard 11 – 17 mm with 13 mm wood in front of the first knife Optional 8 – 14 mm with 10 mm wood in front of the first knife Cutting line height: 23.8 mm Height of feeder stack including pallet: max. 2000 mm Height of delivery stack including pallet: max. 1700 mm Weight of feeder stack: max. 1000 kg Weight of delivery stack: max. 1000 kg Height of feeder residual stack: max. 450 mm Weight of feeder residual stack: max. 450 kg Height of delivery auxiliary stack: max. 200 mm Weight of delivery auxiliary stack: 200 kg Pallet sizes Feeder: max. 800 x 1200 mm (EURO pallet) Delivery: max. 800 x 1200 (EURO pallet) Pallet height: max. 170 mm Drive and power supply The machine is driven by a frequency-controlled motor via a flywheel. A pneumatic clutch is located between the flywheel and the machine, which has a spring-loaded brake. This clutch turns the machine on and off. The motor remains permanently switched on. The control cabinet located next to the machine contains, with a few exceptions, all the control devices for the punch and feeder. The control and signaling devices are located on the machine. They are distributed among the control panels as required. Itolhjv T T N Heccqtof Control cabinet Equipment: Power supply, main switch, fuses, motor protection device, PLC control Connection values: 3 NAC 400 V, 50 Hz, 63 A Control voltage: 24 V DC; 230 V; 50 Hz Dimensions: 2800 x 600 x 2200 mm Performance Data Main Motor: 18.5 kW Feeder Pressure-Vacuum Pump: 4.0 kW Machine Power: 41 kW Average Power (7500 sheets/h): 24 kW Average Power Consumption (7500 sheets/h): 50 A Pneumatic Punch Compressed Air Connection = Operating Pressure: 5.5 bar Minimum Pressure: 4.5 bar Air Consumption Based on Intake Volume: 27 m³/h (with one sheet stretching device) Additional Air Consumption: 25 m³/h (for each additional sheet stretching device) Pneumatic Feeder Compressed Air Connection: 0.6 bar Vacuum Connection: -0.6 bar Air Consumption: 70 m³/h each Noise Emissions According to DIN 45635, the Sound pressure levels at the machine's operating stations are below dB(A). The machine is fully functional and in very good condition. Various accessories are included.

Condition: excellent (used), Year of construction: 2014, • Substrate width : max 430mm • 8 Flexo Printing Unit • (Fully servo driven: double servo motors on print cylinder and impression roller) • 8 UV dryer • Temperature Control • Driven Chilled Drums • Chilling unit • Front load unwinder with motorized roll lifting • Unwinder with magnetic particle clutch (max. reel diameter 1.000 mm.) • Automatic Web Guide Ijlhcjv Tzhqocqtjtf • Video inspection with manual camera movement • Servo Infeed group • 2 Die-cutting stations (male-female die-cutting possible) - servo • 1 Gap Master • Waste matrix rewinder diameter : Snowball 605mm • Servo Outfeed • Organizer (includes crane to remove and store die-cutting tools) • 3 Web break detectors • 3 antistatic bars • Motorized rewinder (max. reel diameter 1.000 mm.) • Local touch screen panel on each printing and die-cutting station • Main touch screen panel (PC MHI) • Direct Internet Connection for remote SW and HW service and upgrades • Automatic pre-register, register and tension control • Vario™ - Servo driven infeed and outfeed (includes 2 active load cells) • GIDUE mark-to-cylinder ARC register control • Servo driven die-cutting units (1 servo motor per unit) • Second pass register control • Print Tutor™ An "intelligent" camera automatically detects print register and pressure marks and performs completely automatic register adjustment, during the set-up and during production. It includes additional servo motor for lateral register adjustment (lenght register adjustment is built in servo driving motor of the print cylinder. • Delame/Relam 2K • Turn bar • Lamination and cold foil • Corona treater • Web Cleaner •

Condition: used, Electric table punch for plastic effect binding Itolhev Sbl Hoccqtjf Triggered by foot pedal, 220V connection Incl. manual binding device Working width: 320 mm Manufacturer: probably Renz- unfortunately no type plate available anymore Can be inspected on site in production available at short notice

Condition: used, Year of construction: 2012, Max Material width: 430 mm Flexographic units:10 units with UV lamps Itjlhcjv Rnabecqtef last 2 units has additional hot air dryers 4 digital heads for Variable data with KBA sation

Year of construction: 2004, Condition: used, Functionality: fully functional, Max Material width: 430 mm Flexographic units: 7 units with UV lamps Curing/Drying system: IST Ijlhccqjv Rmygotjtf Die cutting unit: 2 units for flexible dies A sheeting conveyor

Year of construction: 2007, Condition: good (used), BOGRAMA DIE-CUTTING STREET Year of Manufacture: 2007 _____ Product Description: 1. 1x feeder 1: VS 550 2. 1x feeder 2: MAX 063-03 Itjlhccqsv Rd S Hjtof 3. 1x front cut: BSM 450/220/15 Plus (accessories for flat punch available) 4. 1x head & foot trim: BSM 450/220/40 Plus 5. 1x delivery 1: STA 550 6. 1x delivery 2: SAB 550 7. 1x camera control 8. 2x conveyor belt short 9. 1x long conveyor belt 10. accessories (knife, hold-down device, roller guide) Machine Specifications and Equipment:  Size: 210mm x 550mm _____ Accessories Included:  Manuals  Keys  Etc. _____

Year of construction: 1983, Condition: good (used), max. size 32 x 32 cm Itslev N Nk Eshccqtjf age 1983 die cutting machine block thickness up to 2 mm max. 5.000 cycles / h (off-load)

Condition: used, Year of construction: 1999, Steuer Foil Jet FBR 104 + R Year of manufacture: 1999 Production speed: 10,000 sheets/h Itolhov Ny Uzsccqtef Sheet format: max. 720 x 1,040 mm min. 280 x 420 mm Sheet thickness: 0.1 - 0.75 mm Embossing format: max. 710 x 1,020 mm Sheet edge (gripper edge) without embossing: 10 - 12 mm Cylinder diameter: 270 mm Undercut (recess) Print cylinder, printing unit - 1.5 mm Print cylinder, relief unit - 1.6 mm Width of stamping foils: max. 1,020 mm Gap between stamping foils: min. 6 mm Diameter of stamping foils: max. 300 mm Embossing tool height: 7 mm for use at room temperature 6.7 mm for use at approx. 200 °C C Winding plate 1.2 mm

Year of construction: 1983, Condition: good (used), max. size 42 x 42 cm age 1983 die cutting machine block thickness up to 2 mm max. 5.000 cycles / h (off-load) Itoljv I D Nmjhccqtof

Condition: good (used), Adast Grafopress GPE letterpress machine Very good condition, ready for production, after inspection. The machine has all the safety features. Export version. The equipment includes printing rollers. The device is used for die cutting, printing, creasing, numbering, etc. Itjlhccqov E A U Netsf

Condition: good (used), Heidelberg Tiegel TP Hot stamping machine Letterpress Machine prepared for hot stamping, die cutting, printing, creasing, perforating numbering, etc. Machine condition very good. Original Heidelberg ART system with temperature controller, heating plate with drillings. This is a machine from the end of the production years, an incredibly rare model. The distinguishing feature of this version is drawer under the machine and a large wheel protection cover. Ink system. Hard sheet metal for the pressure A set of accessories and tools. Machine format 26x38cm Weight 600gsm Speed ​​5000 sheets/h Iolsv E A Uvohccqtjtf Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, instructions included.

Condition: good (used), TMZ F-102 76x106cm die cutting machine The machine is fully operational, ready to work. Made in Spain. Itjlhcjv Erzxocqtof Format 760x1060mm Weight 3600kg Power supply 380V Installed power 4.5 kW Equipment: – pneumatic clutch – control panel – mounting frame – 3 operating modes: continuous, with time delay, manual – central lubrication – safety guards – operating tools – sheet metal for pressure

Condition: good (used), Heidelberg OHT „windmill” Letterpress Machine for die cutting, printing, creasing, perforating numbering, etc. The condition of the machine is very good, after inspection. 100% original, without modifications. This is a machine from the end of production, the distinguishing feature of this version is the exclusive roller paws, a drawer under the machine and a large wheel protection cover, a red knob on the piston lever. Ink system. Full set of accessories and tools. Machine format 26x38cm Itslhccsv Erw Hjqtef Weight 600gsm Speed ​​5000 sheets/h Weight 1200kg Power supply 400V Fully complete, two frames, spare elements, documentation included. A very rare machine on the market.

Year of construction: 1983, Condition: used, power 380/50 V / Hz. Iolhccqsv Dx D Rstjtf