Plast Trade

Condition: used, Year of construction: 2003, Lot consists of: (1) Plastic injection moulding machine Ijlhccqjylai Ueqshu Technical Details: Own weight: 1000 kg; rated motor power: 17 A; Rated voltage: 24 DC V; Frequency: 50 Hz; Nominal power: 400 V; Rated current: 44 A

Condition: used, Year of construction: 2006, Own weight: 3300 kg; Hydraulic operating pressure: 210; Rated motor power: 28.5 A; Rated voltage: 24 V DC Ihjlhccqsylabkjqou

Condition: like new (used), Year of construction: 2018, operating hours: 33,526 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 40 mm, displacement volume: 220 cm³, Technical Data - Clamping Unit Clamping force: 1600 kN Tie bar spacing (h x v): 520 x 520 mm Platen size (h x v): 760 x 760 mm Minimum mould height: 250 mm Maximum mould height: 600 mm Maximum daylight: 1060 mm Opening stroke: 460 mm Ejector stroke: 150 mm Ejector force: 40 kN Mould weight: 1250 kg Technical Data - Injection Unit Screw diameter: 40 mm Shot volume: 220 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 175 mm Screw speed: 420 rpm Plasticising rate (PS): 33 g/s Free shot weight (PS): 224 g/s Ihjlhsyk T I Uoccqqju Number of heating zones: 4 Nozzle stroke: 305 mm Dimensions & Weight Machine dimensions (L x W x H): 5.9 m x 1.7 m x 2.2 m Total weight: 8,400 kg Equipment Display language: German Hydraulic core pull, 1x Core pull unit, hydraulic Machine without material loader Needle shut-off nozzle, pneumatically actuated EUROMAP 63 interface

Condition: good (used), Year of construction: 2009, Clamping force: 100 t Screw diameter: 40 mm Type: Horizontal Ihslheyktp Sjccqqeu Drive: Hydraulic

Condition: excellent (used), Year of construction: 2014, Clamping force: 200 t Screw diameter: 50 mm Shot weight: 359 g Distance between tie bars V: 570 mm Distance between tie bars H: 570 mm Shot volume: 392 cm3 Injection pressure: 2000 bar Euromap 67 1x core puller Type: Horizontal Drive: Hydraulic Iolhccjyktgqeqqjhu

Condition: like new (used), Year of construction: 2023, operating hours: 6,102 h, functionality: fully functional, machine/vehicle number: 202212185019826, clamping force: 1,850 kN, screw diameter: 150 mm, displacement volume: 9,698 cm³, overall weight: 1,00,000 kg, heating capacity: 118 kW (160.44 HP), number of injections: 1, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 712 A, Equipment: documentation/manual, We offer this as new Haitian JUPITER JU III 18500 - 22300 B injection molding machine, year of construction 2023. Ihsleyktc Eehccqqju If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2014, Arburg 420C 1000-290 Iholeykpchehccqqju Tie bar distance: 420x420 mm Screw dia : 35 mm Shot volume: 144 cm3 Shot weight: 132 g/ ps

Condition: like new (used), Year of construction: 2020, operating hours: 8,344 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, displacement volume: 392 cm³, Technical Data Clamping Unit Clamping force: 2000 kN Platen size h x v: 1772 x 800 mm Islhccjyka A Ssqqohu Minimum mold height: 400 mm Maximum daylight: 900 mm Opening stroke: 500 mm Rotary table diameter: 2000 mm Ejector stroke: 175 mm Ejector force: 45 kN Mold weight: 6000 kg Technical Data Injection Unit Screw diameter: 50 mm Shot volume: 392 ccm Injection pressure: 2000 bar Screw L/D ratio: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 880 Nm Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions LxWxH: 4.11 m x 2.65 m x 4.81 m Total weight: 22,000 kg Equipment Display text German Display text English CEE socket 16A Hydraulic core pull 4x Air valve 1x Machine with water battery Machine without material hopper Leveling elements EUROMAP 67 handling interface EUROMAP 73 interface OPC interface

Condition: ready for operation (used), Year of construction: 2003, operating hours: 68,500 h, functionality: fully functional, Clamping force 1750 kN Mould opening force, max. 101 kN Travel force movable platen opening 50 kN Travel force movable platen closing 42 kN Size of mould platens (h x v) 915 x 915 mm Distance between tie bars (h x v) 560 x 560 mm Mould opening stroke 700 mm Mould height min 350 mm Max. daylight 1050 mm Ihsloykah Uohccqqeu Hydraulic ejector - stroke 200 mm Ejector force 58/28 kN Injection unit: Screw diameter 50 mm Ls/D ratio 20 Injection pressure 1892 bar Stroke volume 377 ccm Shot weight (PS) 343 gr. Injection rate 247 ccm/s Screw speed 342 1/min Plasticising rate max. 37 g/s Nozzle pressure 84 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 30 kW Installed heating capacity 16 kW Adjustable barrel heating zones 5 Reservoir capacity 525 ltr. Dimensions and weights: Dimensions of the machine ca. 5,50 x 2,20 x 2,30 m Total machine weight 10.530 kg Max. mould weight 2535 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 1 x hydr. core pull - Robot interface according to Euromap 12

Condition: ready for operation (used), Year of construction: 2015, operating hours: 74,114 h, clamping force: 1,600 kN, screw diameter: 45 mm, This 5s Krauss Maffei 160-750 EX was manufactured in 2015. It features a clamping force of 1600 kN and a fully electric drive system, ensuring efficient operation. The machine has a screw diameter of 45 mm and a calculated shot volume of 302 cm³, making it suitable for various injection molding applications. Consider the opportunity to buy this Krauss Maffei 160-750 EX electrical injection moulding machine. Contact us for further details. • Injection unit size: 750 (International size rating) • Drive system: Fully electric (EX series) • Calculated shot volume: 302 cm³ • Max. injection pressure: 2429 bar • Distance between tie bars: 520 x 520 mm • Mold opening stroke: 450 mm Ihslheyi D I Aoccqqsu • Mold height: min 200 mm, max 600 mm • Ejector stroke: 150 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 137949-100, clamping force: 2,100 kN, screw diameter: 65 mm, displacement volume: 913 cm³, injection pressure: 1,600 bar, overall weight: 10,500 kg, controller model: UNILOG B8, The machine was serviced and upgraded to the latest standards by the manufacturer in 2021! It has not been used since and is therefore in very good condition! The machine is offered complete with 2 Kistler modules for cavity pressure control! TECHNICAL DETAILS Plastic type: Thermoset Clamping force: 2,100 kN Screw diameter: 65 mm Screw stroke: 275 mm Screw L/D ratio: 22 Max. screw speed: 278 rpm Screw torque: 1,920 Nm Tie bar spacing (HxV): 670 x 620 mm Mold installation height: 350 mm Platen daylight: 1,100 mm Opening stroke: 750 mm Ihjlhcjyi Ailecqqou Ejector stroke: 200 mm Ejector force: 65 kN Theoretical shot volume: 913 cm³ Specific injection pressure: 1,600 bar Max. plasticising rate: 62 g/s Nozzle stroke / nozzle force: 400 mm / 100 kN Free-shot injection rate: 419 cm³/s Barrel heater power: 27 kW Number of heating zones incl. nozzle: 5 MACHINE DETAILS Control system: UNILOG B8 Hydraulics Hydraulic oil tank capacity: 600 liters Oil temperature min/max (HLP 32): 30 °C / 40 °C Oil temperature min/max (HLP 46): 40 °C / 50 °C Oil cooling activation temperature (HLP 32): 35 °C Oil cooling activation temperature (HLP 46): 45 °C Electrical Drive power hydraulic pump: 37 kW Max. screw barrel temperature: 350 °C Cooling water system Cooling water consumption: approx. 0.5 - 1.5 m³/h Max. cooling water supply temperature: 35 °C Cooling water return: max. 10 bar Ambient temperature: °C Noise level: 65 dB(A) Weight: 10,500 kg Operating hours: 1,437 h EQUIPMENT Kistler module for cavity pressure control, range 1: 20,000 pC Kistler module for cavity pressure control, range 2: 10,000 pC

Condition: excellent (used), Year of construction: 2001, operating hours: 25,850 h, clamping force: 40 kN, screw diameter: 25 mm, The Negri Bossi 40T in very good condition did low hours was in clean room production Ihslhsyivpleccqqou

Condition: good (used), Year of construction: 2001, functionality: fully functional, clamping force: 55 kN, screw diameter: 32 mm, The Negri Bossi 55T Its in good working condition have faulty screen the owner connected to external screen hours under 28500 . The machine was in clean room prouduction . Ihjlhoyivireccqqeu

Condition: good (used), Year of construction: 1997, Krauss-Maffei KM 110-520 C1 Year: 1997 Screw diameter: 45 mm Clamping force: 110 tons Tie bar distance: 47x47 cm Shot weight: 234 g Iholhceyh Rymscqqsu

Condition: excellent (used), Year of construction: 2008, operating hours: 75,851 h, Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Ijlhccqjyh Ha Aoqohu Opening stroke (mm): 0-510 Mold installation height: 260-600 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 100 Rated power (kW): 55

Condition: like new (used), Year of construction: 2018, clamping force: 2,300 kN, Equipment: documentation/manual, Toshiba EC230SXII – 230 ton Injection unit i8 – Screw 50 mm CLAMPING UNIT Clamping force: 2250 kN (230 t) Tie bar spacing (H×V): 610 × 560 mm Platen size (H×V): 880 × 830 mm Moving platen stroke: 550 mm Max daylight: 1230 mm Mold height min–max: 250–680 mm Ejector force: 49 kN (5.0 t) Ejector stroke: 130 mm INJECTION UNIT – 50 mm Screw diameter: 50 mm Shot volume: 392 cm³ Iheloyhpi Aehccqqeu Shot weight PS: 361 g Shot weight PE: 286 g Max injection pressure: 200 MPa Max holding pressure: 200 MPa INJECTION SPEED / RATE STD speed: 250 mm/s STD rate: 490 cm³/s HIGH DUTY speed: 160 mm/s HIGH DUTY rate: 314 cm³/s HIGH SPEED speed: 350 mm/s HIGH SPEED rate: 687 cm³/s PLASTICIZING Plasticizing capacity PS: 160 kg/h Screw speed: 255 rpm Screw torque: 1421 Nm Nozzle contact force: 29.4 kN (3.0 t) ELECTRICAL Main breaker STD: 125 A Main breaker HIGH DUTY: 125 A Main breaker HIGH SPEED: 175 A Transformer: 75 kVA Heater capacity: 15.2–16 kW DIMENSIONS & WEIGHT Length: 6.4 m Width: 1.7 m Height: 2.0 m Weight: 9.9 t

Condition: defective spare-parts repository (used), Year of construction: 2004, Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Iholhcjyhn Tgjcqqju Condition: Defective – for spare parts (Circuit board removed, hydraulic valve removed)

Condition: good (used), Year of construction: 2000, operating hours: 1,32,186 h, Absolute cycle counter: C120 = 062077965 Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 3000 Opening stroke (mm): 0-700 Mold installation height: 400-750 mm Nominal voltage (V / Hz): 400 / 50 Nominal current (A): 99,5 Rated power (kW): 55 Ihelhcsyhnvhscqqeu -With dosing system -Handling robot Wittman, available as an option upon customer request Condition: good condition (Oil leak, original monitor defective)

Condition: excellent (used), Year of construction: 2004, operating hours: 97,919 h, Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Ieljyhnrpshccqqjhu Nominal voltage (V / Hz): 400/50 Nominal current (A): 136 Rated power (kW): 75

Condition: ready for operation (used), Year of construction: 2012, operating hours: 70,936 h, clamping force: 4,200 kN, screw diameter: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Mold installation height (min): 380 mm • Opening stroke: 1020 mm • Daylight (platen distance): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on moving side (AS) + 2 on fixed side (DS) • Shut-off nozzle: 2-fold hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Stroke volume: 1810 ccm • Shot weight (PS): 1647 g • Injection flow (PS): 498 g/s • Plasticizing flow: 106 g/s Ielhsyhby Hoccqqshu • Screw L/D: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment • KM Linear robot, built in 2021 • Hot runner control, 12-zone • Mold sensors: Priamus (p=2 / t=0)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes • Condition: Well-maintained and serviced Additional equipment Ihslhccsyhbq Ejqqju • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: ready for operation (used), Year of construction: 1995, operating hours: 1,22,158 h, clamping force: 3,300 kN, screw diameter: 60 mm, This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details. • Clamping unit: • Locking force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mold installation height: min 330 mm / max 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mold weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection unit 1: • Unit code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Stroke volume: 763 ccm • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Max dosing stroke: 270 mm Ieloyg Nkwjhccqqohu • Plasticizing flow: 41 g/s • Configuration/controls: • Armored (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (Yes/Yes) • Printer interface: integrated • Hot runner control: 0-zone (none) • Maintenance: • Hose replacement performed in 2017 Additional equipment • Wittmann W322-121 CNC linear robot/removal device (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Condition: ready for operation (used), Year of construction: 2016, operating hours: 9,171 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN and a screw diameter of 45 mm, making it suitable for high-temperature thermoplastics. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force • Extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Injection/plasticizing unit: • Screw diameter: 45 mm (without nozzle) • High wear-resistant version • Sinter-metal check ring • CrN coating on screw and check ring • Suitable for abrasive, corrosive, and high-temperature thermoplastics • Technology level 2 – servo-controlled, dual-circuit pump system: • Two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system: • Touchscreen operation with process editor • 15-inch (38.1 cm) display • Multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • Connectivity/interfaces: • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • EUROMAP 67 robot interface • Prepared for ARBURG MULTILIFT robot system • Utilities: • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators • 400 V / 50 Hz, with neutral conductor • Hours: 9,171 Additional equipment Ijlhceyg I Ihscqqshu • None included in the listing • Note: Machine is prepared for robot integration (EUROMAP 67 interface; prepared for ARBURG MULTILIFT), but no robot/automation is included.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 13,361 h, clamping force: 1,600 kN, screw diameter: 45 mm, controller manufacturer: ARBURG, This 3s Arburg 520S-1500-400 was manufactured in 2016. It features a clamping force of 1600 kN, a screw diameter of 45 mm, and a servo-controlled dual-circuit pump system for precise movements. The SELOGICA direct control system with a 15-inch touchscreen enhances usability. Consider the opportunity to buy this Arburg 520S-1500-400 hydraulic injection moulding machine. Contact us for further details. • Programmable and controlled build-up of clamping force; extended clamping program with 2 stages • Hydraulic, servo-controlled ejector on moving platen • Screw diameter: 45 mm (without nozzle) • High wear-resistant version; sinter-metal check ring; CrN coating on screw and check ring • Suitable for abrasive, corrosive and high-temperature thermoplastics • Technology level 2: servo-controlled, dual-circuit pump system with two regulated hydraulic pumps for precise, parallel movements • Programmable nozzle contact force and holding pressure • Continuous oil circulation with additional cooling and filtration • SELOGICA direct control system with touchscreen process editor • 15-inch (38.1 cm) display; multilingual interface (German, English, local language) • Heating capacity zones 1–6: 3.6 kW each (230 V / 16 A) • Cylinder heating temperature up to 450 °C • OPC UA interface (MES/host computer connection) • USB and CompactFlash interfaces for data storage • Pneumatic supply with pressure regulator • Cooling water distribution with adjustable circuits and flow indicators Iholhccqeyg I Egsqeu • Electrical: 400 V / 50 Hz, with neutral conductor • Hours: 13,361 Additional equipment • None included as listed • Robot/automation readiness: EUROMAP 67 robot interface; prepared for ARBURG MULTILIFT robot system

Condition: used, Year of construction: 1999, Injection moulding machine Krauss-Maffei 800 /5700MC, year 1999, for sale. Technical specifications available on request. Iholhccqeyg Hbgeqeu