Spindle Box

Condition: used, Year of construction: 2007, Haas VM-2 CNC Vertical Machining Center (2007) With 24-Tool ATC and chip auger Njdpfjzpattsx Aflocw Offerors are required to download the seller required document from the link below. For sales within Israel, offerors should complete section 1 only. For export sales, offerors should complete and return sections 1 and 2. Please note the Removal Instructions in listing, which form part of the terms of sale.

Condition: excellent (used), Year of construction: 2016, 2016 Hurco VM10Ui CNC 5-Axis Integrated Trunnion Vertical Machining Centre Ncjdpjzn Nu Dsfx Aflow Table Ø200mm (6 'T' Slots). Maximum Table Load 150kg. Axis Travel 'X'=530mm, 'Y'=410mm, 'Z'=480mm, 'A'=+30°/-110°, 'C'=360°. Rapid Traverse 'X,Y,Z'=28m/min, 'A & C'=25rpm. Spindle Nose to Table Min/Max 36mm/520mm. Maximum Spindle Speed 12,000RPM. Spindle Power 7.5kW.Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø89mm, Maximum Tool Length 250mm, Maximum Tool Weight 7kg. S/No. H-VU0284 (2016/11). With Coolant System, Auger Conveyor, Renishaw Laser Tool Setter, Signal Tower & Handwheel. Weight 3,360kg.

Condition: good (used), Year of construction: 2014, functionality: fully functional, The machine is in good technical condition, and an inspection while running can be arranged. Includes a 4th axis. Work area and table: Table dimensions: 914 × 356 mm Travel in the X-axis: 762 mm Travel in the Y-axis: 406 mm Travel in the Z-axis: 508 mm Distance from the spindle nose to the table: 102 to 610 mm Maximum table load: 680 kg Spindle (Super Speed specification) Spindle taper: ISO 40 (Inline Direct-Drive) Maximum spindle speed: 12,000 rpm Spindle motor power: 22.4 kW (30 HP) Torque: 122 Nm at 2000 rpm Tool changer (ATC) Changer type: Rapid side-mount tool changer Changer capacity: 24+1 positions (optionally 30+1) Tool change time (tool-to-tool): approx. 1.8 seconds Nsdsznx Nwjpfx Aflscw Feeds and drives Rapid traverse rates in X, Y, and Z axes: 35.6 m/min (compared to 25.4 m/min for the standard VF-2 version) Maximum working feed rate: 21.2 m/min Guide type: Linear ball bearings in all axes Dimensions and weight Machine footprint (W × D × H): approx. 2.51 × 2.36 × 2.57 m (height depends on the Z-axis elevation) Machine weight: approximately 3,540 kg

Condition: used, Year of construction: 2007, x-travel 760 mm y-travel 510 mm Ncedpfx Asznnc Tsflsw z-travel 610 mm table surface area 1.020 x 510 mm control WINMAX spindle turning speed range 12.000 U/min spindle drive 13,5 kW 24 St. tool adaptor SK 40 | | internal coolant system feed 20 bar rapid traverse 35/35/30 m/min weight of the machine ca. 5,0 t used vertical machinig centre with 4th axis - 4th axis - Dual toolchanger - internal coolant with filter - spindle oil cooling - electric hand wheel

Condition: good (used), Year of construction: 2018, functionality: fully functional, Fanuc control system, 21-position tool changer, Spindle speed 10,000 rpm, Ncedpoznlg Njfx Aflew Internal coolant system (ICS), Chip conveyor.

Condition: used, Year of construction: 2004, Hurco VMX24S Vertical Machining Centre with Hurco Ultimax Control, Table size 760mm x 510mm, 24 ATC, BT 40 Tooling, 8000rpm, Travel X=610mm Y= 508mm Z= 610mm, Coolant Tank. S/No. H-2S061 (2004) Location: This lot is located in Burton-on-Trent. A charge of £350 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Nsdpfxsznkmne Aflocw

Condition: good (used), Sharnoa CNC machining center. Njdpfx Afezndv Aslscw

Condition: used, Year of construction: 2014, operating hours: 7,500 h, 5-AXIS MACHINING CENTER BRAND: HAAS VF-3 SS YEAR OF FIRST INSTALLATION: 2014 TABLE DIMENSIONS: 1,219 mm x 457 mm MAXIMUM TABLE LOAD: 800 KG TRAVEL: X: 1,016 mm Y: 508 mm Z: 635 mm Ncodpfx Aezminnsflsw SPINDLE SPEED: 12,000 RPM TOOL MAGAZINE: 40 POSITIONS HIGH PRESSURE / INTERNAL SPINDLE COOLING RENISH PROBE PRESETTING ADJUSTABLE COOLANT NOZZLE

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 355A24001, travel distance X-axis: 825 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 515 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, workpiece height (max.): 300 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 3,350 mm, total length: 4,480 mm, total width: 3,900 mm, rotational speed (max.): 15,000 rpm, overall weight: 10,300 kg, coolant supply: 20 bar, number of slots in tool magazine: 90, tool length: 280 mm, tool diameter: 76 mm, tool weight: 7,000 g, Equipment: chip conveyor, documentation/manual, 5-AXIS SIMULTANEOUS MACHINING • B/C-axis encoders • B-axis +30° to -120° • C-axis 360° TOOL MAGAZINE CAPACITY • 90-position magazine (chain type) • Tool diameter 76 mm • Tool length 280 mm • Tool weight 7 kg LARGE MACHINING AREA • Travel range X: 825 Y: 508 Z: 515 • Swivel diameter 500 mm • Workpiece weight 200 kg • Workpiece size Ø500 mm x 300 mm USER-FRIENDLY DESIGN • Large work area doors • Short distance to the spindle • Good accessibility to the machining area and tool magazine EQUIPMENT • CNC control Heidenhain TNC640 (19") • MPG handwheel • 90-position tool magazine • 15,000 min⁻¹ (taper #40), coupling Ncjdpezlnxcsfx Aflsw • Spindle cooler • Knoll interface • Automatic central oil lubrication system • Chip conveyor • Direct path measurement system C/B-axis • Preparation for oil mist extraction system • 2-position rotary pallet changer (400 x 400 mm) • Compressed air at spindle center • CE specification Rotary/swivel table with direct drive

Condition: ready for operation (used), Year of construction: 2003, operating hours: 56,146 h, travel distance X-axis: 700 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 610 mm, controller manufacturer: HEIDENHAIN, overall weight: 5,100 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis FEHLMANN Picomax 90-M was manufactured in 2003. It features a maximum spindle speed of 18,000 rpm and a table size of 920 x 380 mm. The machine offers impressive X-axis travel of 700 mm, Y-axis travel of 420 mm, and Z-axis travel of 610 mm, accommodating a maximum workpiece weight of 250 kg. If you are looking to get high-quality machining capabilities, consider the FEHLMANN Picomax 90-M vertical machining centre we have for sale. Contact us for further details. • Table size: 920 × 380 mm • Distance between table and spindle: min 94 mm / max 704 mm • Max. workpiece weight on table: 250 kg Additional equipment • Dividing head, 4th and 5th axis: FEHLMANN ATS 160 Ncsdozlhu Repfx Aflsw

Condition: good (used), TOS CNC CONSOLE MILLING MACHINE WITH CNC CONTROL HEIDENHAIN TNC310 TYPE: FV30 MACHINE NO.: 203300233 YEAR OF MANUFACTURE: 1998 Technical Data: Longitudinal travel – X-axis: 760 mm Transverse travel – Y-axis: 381 mm Vertical travel of the quill – Z-axis: 152 mm Vertical travel of the console: 450 mm Table size: 305 x 1300 mm Max. workpiece weight: 360 kg Spindle mounting: ISO40, DIN 69871 A Speed range: continuously variable 100-4000 rpm Drive power: 5.5 kW (7.5 kW / 5 min.) Weight: 2700 kg Equipment:  CNC path control HEIDENHAIN TNC310  electronic handwheel  pneumatic tool programming  automatic central lubrication for guides and ball screws  coolant system, capacity 42 l  machine light  various tool holders  standard accessories  documentation Ncsdpfozlg Nyex Aflsw  CE conformity

Condition: ready for operation (used), Year of construction: 1997, CNC milling machine HURCO BMC 30 M, year of manufacture 1997 Control system: ULTIMAX 3 dialog Ncjdpjzlbytofx Aflew Travel distances: X 762 mm, Y 458 mm, Z 610 mm Table: 500 x 1000 mm Spindle speed: up to 8000 rpm Spindle mounting: SK40 Magazine capacity: 24 positions with 24 tool holders Coolant system included. The machine was used for milling plastics. Machine is ready for operation. Machine documentation is available.

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 700 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 426, spindle speed (max.): 4,200 rpm, number of axes: 3, This 3-axis HERMLE UWF 1002 H was manufactured in 1995. It features an X-axis travel of 700 mm, Y-axis travel of 630 mm, and Z-axis travel of 500 mm. The machine has a table load capacity of 700 kg and a table surface area of 1000 x 490 mm. If you are looking to get high-quality machining capabilities, consider the HERMLE UWF 1002 H vertical machining centre we have for sale. Contact us for further details. - Operating Voltage: 400 V / 3~- Control Voltage: 24 V DC / 220 V AC- Frequency: 50 Hz- Total Nominal Current: 33 A- Total Rating: 23 kVA (with IKZ) / 21 kW- X-Axis Travel: 700 mm- Y-Axis Travel: 630 mm- Z-Axis Travel: 500 mm- Net Weight: 6,800 kg- Table Load Capacity: 700 kg- Table Surface Area: 1000 x 490 mm- Coolant Tank Capacity: 240 Liters- Coolant Flow Rate / Pressure: 20 L/min / max. 4 bar- Electrical Drawing No.: HS 460-2- Standard Features: Full protective cabin, 5-axis contouring control, Cast iron/mineral cast composite construction in the machine base and cross support, Heat exchanger in the control cabinet, Brushless AC motors, Work area lights- Current Errors/Issues: Motor encoder Z: Amplitude too small Nsdpfxezk Inbj Aflecw

Condition: used, Year of construction: 2000, Cincinnati Arrow VMC 750 Vertical Machining Centre with Heidenhain Control, Table Size 950mm x 520mm, 21 Tool ATC, BT40 Spindle Taper, Handwheel Pendant, Machine Weight 3300kg. S/No. 7043-H00-KK1379 (2000). Country of Origin: United Kingdom Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Nsdpozi Ttyjfx Afljcw

Condition: ready for operation (used), Year of construction: 2015, Manufacturer: WEMAS GmbH Type: BZ 500 Year of manufacture: 2015 Control system: FANUC Series 0i-MD Connected load: 22 kVA Operating voltage: 400 V Weight: approx. 8,280 kg Equipment: Pallet changer The machine was primarily used for aluminum processing and is very well suited for this purpose. Nedezi Hdlepfx Aflscw According to our current knowledge, the machine is generally in operating condition. There is currently a malfunction in the pallet changer, which is likely due to a defective sensor. Therefore, the pallet changer is currently not reliably usable. According to our current knowledge, all other machine functions are operational. The machine is currently powered on and can be inspected after prior appointment.

Condition: good (used), Year of construction: 2006, Vertical machining center Machine type: Hermle U 740 Njdpfx Aoziy Nzoflocw Control: Heidenhain iTNC 530 Year: 2006 SPECIFICATIONS Travel X-Axis: 740 (915) mm Y-Axis: 500 mm Z-Axis: 500 mm Rapid motion: (X/Y/Z): 30 / 30 / 20 m/min. Spindle speeds: 12.000 rpm Spindle power: 32,5 / 17,5 kW Torque: 200/108 Nm Tool: SK 40 Toolchanger Tool capacity: 16 Table size: 900 x 500 mm Max. Table Load: 700 kg Machine weight: 7300 kg Equipment Cooling tank: 200 l Chip tray Caliper: TS 640 Electronical handwheel Chip conveyor Chip rinsing pistol

Condition: excellent (used), Year of construction: 2010, operating hours: 32,300 h, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, nominal power (apparent): 11 kVA, controller manufacturer: Hurco, controller model: WINMAX, workpiece weight (max.): 340 kg, table width: 356 mm, table length: 762 mm, table load: 340 kg, overall weight: 2,900 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 32,300 h, spindle motor power: 11,000 W, spindle nose: CAT 40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, 2010 Hurco VM10 CNC Milling Machine with CAT 40 Spindle, WINMAX Control 2010 Hurco VM10 Vertical Machining Centre with WINMAX CNC Control, CAT 40 spindle, 20-tool ATC and premium software package. Good condition. Delivery throughout Ireland, UK & Europe. Manufacturer: Hurco Model: VM10 Machine Type: 3 Axis Vertical Machining Centre Year: 2010 Hours: 32,300hrs Control: WINMAX Condition: Excellent For sale is a 2010 Hurco VM10 Vertical Machining Centre in good working condition, equipped with the renowned Hurco WINMAX CNC Control (Version V08.01.04.33) and a CAT 40 10,000rpm spindle. The Hurco VM10 is recognised worldwide as one of the most reliable and user-friendly vertical machining centres for precision CNC milling, toolroom machining, prototype manufacture, small batch production, mould making, and general engineering. With 32,300 machine hours, this machine remains an excellent opportunity for engineering companies looking for an affordable, high-quality used CNC machining centre from one of the industry's most respected manufacturers. Please note: No tooling is included with the machine. Technical Specifications Manufacturer: Hurco Model: VM10 Year: 2010 Machine Type: Vertical Machining Centre CNC Control: Hurco WINMAX Mill V08.01.04.33 Machine Hours: 32,300 Hours X Axis Travel: 660 mm Y Axis Travel: 406 mm Z Axis Travel: 508 mm Table Size: 762 × 356 mm Maximum Table Load: 340 kg Spindle Taper: CAT 40 Spindle Speed: 10,000 RPM Spindle Motor: 11 kW (15 HP Peak) Automatic Tool Changer: 20 Station ATC Rapid Traverse (X/Y/Z): 24 m/min Machine Weight Approx.: 2,900 kg Condition: Excellent Working Condition Tooling: No Tooling Included Installed WINMAX Software Options This machine is equipped with an excellent range of factory software options including: Advanced Verification Graphics DXF File Import NC Productivity Package Industry Standard NC Programming UltiPockets Rigid Tapping Helical Ramp Milling 3D Mold Package NC Conversational Merge Swept Surface Machining Select Surface Finish Quality These options significantly enhance programming flexibility, machining accuracy and production efficiency, making the VM10 suitable for both conversational programming and full ISO/G-Code machining. Notes: *Specifications are given in good faith but not guaranteed* Key Features Hurco WINMAX Conversational CNC One of the easiest CNC controls to learn and operate, allowing operators to quickly produce components without extensive G-Code programming. CAT 40 High-Speed Spindle The industry-standard CAT 40 spindle provides excellent tooling availability and rigidity for machining steel, aluminium, plastics, composites and engineering materials. 20 Station Automatic Tool Changer Fast automatic tool changes reduce machining time and improve production efficiency. Compact High-Performance Design Nodpjziu Hzsfx Afljcw Large machining travels combined with a compact footprint make the VM10 ideal for workshops where floor space is at a premium. High-Speed Precision Machining The 10,000 RPM spindle combined with rapid traverse rates enables efficient production while maintaining excellent surface finishes. Proven Hurco Reliability Hurco machining centres are recognised worldwide for their durability, ease of maintenance and excellent resale value. Machine Condition: Excellent Condition Fully operational Ready for immediate production No tooling included in sale Inspection welcome

Condition: excellent (used), Year of construction: 2013, Brother B-00 control system Travel ranges X/Y/Z: 700 x 400 x 300 mm Nsdjzid Aropfx Afljcw Spindle speed: 10,000 min-1 Tool magazine for 21 tools, BT 30 4th axis (rotary/tilting) 3D measuring probe OP 40 Manual handwheel Chip conveyor Chip collection cart Vacuum unit Various clamping devices and tool holders

Condition: ready for operation (used), Year of construction: 2011, operating hours: 39,205 h, travel distance X-axis: 735 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DMG MORI DMU 65 MonoBlock was manufactured in 2011. It features impressive X, Y, and Z travels of 735 mm, 650 mm, and 560 mm respectively, along with a spindle speed of 18,000 rpm. The machine is equipped with a tool changer that has 30 magazine positions and utilizes a Heidenhain iTNC 530 control type. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 65 MonoBlock vertical machining centre we have for sale. Contact us for further details. Nodpfxjzidqce Aflocw Cooling throuhg spindleSpindle was replaced in the past Technical Specification Through-spindle Coolant Yes

Condition: good (used), Year of construction: 2019, Traverses X Y Z 762 x 508 x 520mm, A axis 30/110 degrees, C axis 360 degrees, table size 250mm diameter, Ncedpjzh I Agsfx Aflsw table load 200kgs, spindle speed 12,000 rpm, spindle taper Din 40, 40 station ATC, WinMax 5 control, through spindle coolant, swarf conveyor.

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 762 x 508 x 610mm, Table 1020 x 510mm, Spindle speed 15,000 rpm, input 15Kw, Ncedpfozh Hvxjx Afljw Hurco Winmax 5 Control, Spindle taper BT40, 30 ATC, Coolant, Low volt light, Swarf Conveyor.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,104 h, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 8,100 rpm, number of axes: 3, This 3-axis HAAS VF-2 was manufactured in 2017. It features an X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2 vertical machining centre we have for sale. Contact us for further details. Nsdpfx Ajzh Hf Toflocw

Condition: good (used), Year of construction: 2013, Traverses XYZ: 762 x 435 x 510mm, table size 920 x 435mm, ISO40 spindle taper, spindle speed 12000 rpm, FANUC i Control, spindle motor power 15kW, 30 station ATC with side arm, Njdpfx Afszhwg Uelocw Through Spindle Coolant, Low Volt Light, Swarf conveyor

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, controller manufacturer: FANUC, controller model: Series 31i B5, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of axes: 3, This 3-axis CHIRON DZ15W MAGNUM HS was manufactured in 2015. It features an X-travel of 730 mm, Y-travel of 400 mm, and Z-travel of 425 mm. The machine is equipped with a robust table surface measuring 1,060 mm x 430 mm. If you are looking to get high-quality machining capabilities, consider the CHIRON DZ15W MAGNUM HS vertical machining centre we have for sale. Contact us for further details. • Quantity: 4 units available • Spindle drive: 14/15 kW • Max. torque: 95 Nm Nsdpfx Afszhm Emoljcw • Table surface: 1.060 mm x 430 mm Technical Specification Taper Size HSK 63

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 108069, OKUMA MB-500 Vertical Machining Center – For Sale OKUMA MB-500 Vertical Machining Center We are offering for sale a well-maintained OKUMA MB-500 CNC Vertical Machining Center, suitable for high-precision machining of steel, stainless steel, aluminum, cast iron, and other engineering materials. The machine has been regularly serviced and maintained in a professional production environment. It is fully operational and can be inspected under power. Main Features Manufacturer: OKUMA Model: MB-500 CNC Control: OKUMA OSP High rigidity and excellent machining accuracy Suitable for both single-part production and medium to large production batches Reliable spindle performance Automatic tool changer Flood coolant system Chip conveyor (if equipped) Well-maintained machine in good working condition Nodpfxszhl Ads Aflecw Applications Precision milling Drilling Tapping General machining of complex components The machine is available for inspection by appointment. Additional technical information, photos, videos, and documentation can be provided upon request. Please feel free to contact us for further details or to arrange a viewing.