DachundWand Handels GmbH

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Dlodjx Ebt Tepfx Addoa Max. upper cheek stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg

Condition: ready for operation (used), functionality: fully functional, working width: 2,500 mm, bending angle (max.): 90 °, sheet thickness (max.): 4 mm, overall weight: 4,300 kg, TECHNICAL DETAILS Bending angle: 0 - 90 degrees Bending width: 2,500 mm Max. bending thickness: 4 mm Max. jaw opening: 100 mm Dedpfxex A Uf Ds Addsla MACHINE DETAILS Weight: approx. 4,300 kg EQUIPMENT Additional tools (as per images) Wiring diagram

Condition: good (used), functionality: fully functional, Bending capacity at 400 N/mm²: 8 mm Usable length: 2500 mm Upper beam stroke: 450 mm Lower beam: 125 mm Bending beam: 125 mm Dedpfox A S D Rex Addjla Price: EUR 9,900,-- net

Condition: used, functionality: fully functional, Year of construction: 1975, Mechanical Swing Bending Machine Make: FASTI Model: 208 2040x3mm Year: 1975 Technical Data Manufacturer: Fasti Model: 208-20-3 Dljdpfox An Tuex Addea Year of Manufacture: 1975 Working length: 2040 mm Sheet thickness: 3 mm Upper beam stroke: 200 mm Stroke speed: approx. 7 mm/s Dimensions: Weight: Equipment • Swiveling upper beam • Motorized upper beam • Maximum upper beam opening: 200 mm • Lower beam adjustable beneath pivot point, 100 mm • Bending beam adjustable beneath pivot point, 100 mm • Bending beam swivels up to 180° • Backgauge adjustable from 0 to 600 mm • Various bending rails as shown in photo All information provided without guarantee. A powered demonstration is available at any time in our exhibition hall.

Condition: ready for operation (used), Year of construction: 1977, Immediately available from site: Hydraulic folding machine Köllschen Type AM 2500/5 Year of manufacture: 1977 Bending length: 2550 mm Djdpfjx Ab Edsx Addjla Material thickness: 5 mm Back gauge Additional new bending rails Drive: 7.5 kW Weight: 5 t Price: EUR 4,000 plus VAT ex works

Condition: used, Max. bending length: 2040 mm Max. sheet thickness: 3 mm steel Dlsdpsxz Emvefx Addea Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Manual backgauge with spring fingers Weight: approx. 2300 kg

Condition: used, Max. bending length: 2540 mm Max. sheet thickness: 2.5 mm steel Manual and automatic bending mode possible Bending angle adjustment via potentiometer Dlsdpoxrt Rksfx Addsa Polished bending rail Weight: 1,700 kg

Condition: new, Year of construction: 2025, STANDARD: Segmented blades with hardened Arkor coating Clamping and bending control via joystick Bending angle adjustment with mechanical protractor Manual backgauge OPTIONAL: Foot pedal and electrical panel Digital display NC-controlled backgauge Motorized backgauge 2520×2.5 Working length mm: 2520 Bending angle: 135° Capacity (mild steel) mm: 2.5 Clamping motor kW: 0.55 Bending motor kW: 2.2 Length mm: 2730 Width mm: 1100 Height mm: 1260 Weight kg: 2250 Dljdpfx Adexlnh Redsa

Condition: new, Year of construction: 2025, STANDARD: Hardened segmented blades with Arkor coating Joystick control for clamping and bending Bending angle adjustment with mechanical protractor Manual backgauge OPTIONAL: Foot pedal and electrical panel Digital display NC-controlled backgauge Motorized backgauge Djdpfsxlclkex Addjla 2020×3 Working length (mm): 2020 Bending angle: 135° Capacity (mild steel, mm): 3 Clamping motor (kW): 0.55 Bending motor (kW): 2.2 Length (mm): 2200 Width (mm): 1100 Height (mm): 1260 Weight (kg): 1750

Condition: new, Year of construction: 2025, Robust welded bodies made of high-quality steel Dljdpfx Aexlcf Djddsa Wide jaw opening capacity between lower and upper blades, up to 0-100 mm Ideal functional characteristics for industrial and special applications Allows for easy material holding and feeding by hand thanks to foot pedal operation CE marked – compliant with EU Safety Directives User manual included Capacity (mm) 2520X2.5MM Max Bending Angle (°) 135

Condition: new, Year of construction: 2025, Sturdy welded bodies made from high-quality steel Dodoxlcd Tjpfx Addola Wide jaw opening capability between lower and upper blades up to 0–100 mm Ideal operating features for industrial and special applications Allows for secure holding and feeding of material by hand thanks to foot pedal operation Complies with EU Safety Directives (CE Marked) Operating manual included Capacity (mm): 2020x3MM Max Bending Angle (°): 135 Dimensions LxWxH (mm): 2700x1900x1600 Weight (kg): 1450

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190459, Offer 25316 Technical Data: - Max. working width: 2,040 mm - Max. material thickness at 40 kg/mm² tensile strength: 3.0 mm - CNC position control POS 400 for 9-program memory - Bending angle adjustment: 6° to 135° - Maximum opening width / stroke of the upper beam: 250 mm - Height adjustment: - Bending beam: 50 mm Dlsdpfx Adoxc Egrjdea - Lower beam: 50 mm - Upper beam drive: 400 V / 2.2 kW - Bending beam drive: 400 V / 2.2 kW - Electric foot switch - Manual backgauge - Segmented box and pan (gooseneck) tooling - Required space: approx. W 3,100 x H 1,450 x D 2,200 mm - Weight: approx. 2,800 kg

Condition: excellent (used), Swing bending machine Brand: Fasti Working width: 1000 mm Sheet thickness approx. 1.5 mm Dsdpfx Adoxcx Hrjdela Width: 1320 mm Depth: 650 mm Height: 1020 mm

Condition: refurbished (used), functionality: fully functional, Year of construction: 1990, degree of automation: semi-automatic, We are offering an overhauled folding machine by Kramer. Bending length: 2500 mm Material thickness: 2.5 mm (steel) Weight: approx. 4000 kg The machine has been fitted with new spindle nuts and a new bending rail made from tempered 1.2312 steel. The machine is powered and can be tested. Please contact us to arrange a viewing. Dlodpfx Asxcpd Uoddsa

Condition: good (used), Year of construction: 2003, sheet width 2520 mm plate thickness 2.50 mm ST thickness at "Niro-steel" 1.50 mm upper clamping bar adjustment 160 mm adjustment speed 100 mm/sec Adjustment folding beam 80.0 mm Bending speed 120 Grad/sec compressed air 6.0 bar work height max. 869 mm control POS 2000 voltage 400 V total power requirement 7.2 kW weight 3430 kg range L-W-H 4120 x 2400 x 2090 mm Current new price ~ 100.000 euros From a maintenance workshop With very good equipment (!!) Equipment: - CNC electric motor-driven universal swivel bending machine * High-precision mechanics with modern control technology * For individual and series production * Robust high-speed machine with high axis speeds * Torsion-free welded construction - Rotatable upper beam / as automatic tool change system * With 2x tool stations (sharp and goose foot bending rail) * Reduces set-up and idle times * Eliminates time-consuming tool changes and adjustments - SCHRÖDER CNC control model POS 2000 * Control panel at front right (operable with PC mouse) * Color display * USB interface * Automatic cutting calculation * Material and tool library * Dimensionally accurate bending simulation * Windows XP operating system * Swivel control, front right - Servo converter-controlled drives * for bending/upper beam & electric backgauge Dedoxbh Euopfx Addjla - CNC motorized lower beam adjustment - CNC electric motorized backgauge * Travel speed 300 mm/sec. - with rear sheet metal support surface, including ball rollers - 1x freely movable double foot switch - Operating instructions (PDF)

Condition: used, sheet width 2020 mm plate thickness 2.5 mm ST upper clamping bar adjustment 250 mm Lower beam adjustment 80.0 mm bending speed 5.5 sec / Hub bending angle max. 0 - 180 ° Control konv. work height max. 930 mm back stop - adjustable ca. 215 mm engine output 2.6 kW weight 1750 kg range L-W-H 2800 x 1200 x 1450 mm Features: - Robust electric-driven folding machine - Bending angle adjustment via electric potentiometer - Manual backgauge * Adjustment via handwheel from the rear - Manual lower beam adjustment - 1x freely movable double foot switch Dedjxabngopfx Addola - Main switch at the front

Condition: new, sheet width 2540 mm Djdpfxjxaaz Ss Addjla plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 6275 kg dimensions of the machine ca. 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: new, sheet width 2035 mm plate thickness 4,5 mm ST thickness at "Niro-steel" 3,0 mm VA Dlsdpfxexaaahs Addoa bending angle max. 0 - 135 ° daylight opening 100 mm back stop - adjustable 70 - 600 mm total power requirement 5,5 kW weight of the machine ca. 4145 kg dimensions of the machine ca. 3300 x 1550 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control * Software with 40 programs and up to 50 steps * 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek

Condition: used, Year of construction: 1991, sheet width 2050 mm plate thickness 3.5 mm Dledpfx Adjw U U Ukjdoa distance between columns 2100 mm stroke of upper beam 250 mm adjustment UW 80.0 mm work height max. 920 mm total power requirement 6.0 kW weight 2910 kg range L-W-H 3185 x 875 x 1450 mm Features: - Robust electric-driven folding machine - With dynamic, powerful drive motors - Manual/automatic operation selectable - Control panel, right front - Bending angle preselection via electric potentiometer - Manual lower beam adjustment - 1x used upper tool rail - 2x used lower tool rails - 1x freely movable double foot switch - Original operating instructions

Condition: used, Year of construction: 1983, sheet width 2540 mm plate thickness 2 mm distance between columns 2600 mm Dlodpfxow H Dkae Addoa min. cut-off length 5 x s mm adjustment of lower beam 80 mm adjustment of upper beam 80 mm daylight opening 350 mm total power requirement 4 kW dimensions 4 x 1 x 1,5 m With accessories.

Condition: ready for operation (used), Year of construction: 2001, control type: NC control, working width: 2,500 mm, sheet thickness (max.): 6 mm, back gauge: 1,000 mm, overall weight: 6,700 kg, total length: 2,800 mm, total width: 3,950 mm, total height: 1,900 mm, power: 7.5 kW (10.20 HP), stroke length: 450 mm, Motorized swing bending machine Manufacturer: HERA Model: SM4 2500x6mm Year of manufacture: 2001 Technical data Manufacturer: HERA Model: SM 4 Year: 2001 Capacity: 2520 x 6 mm Upper beam stroke: 450 mm Lower beam adjustment: max. 100 mm Bending beam adjustment: max. 100 mm Connected load: Upper beam 5.5 kW / Bending beam 7.5 kW Operating voltage: 400 V / 50 Hz Control voltage: 230 V Dimensions approx.: L 3.95 x W 2.80 x H 1.9 m Weight: 6.7 t Equipment • 2 x sharp rail Dlsdpfx Adswxc Rpsdsa • Bending rails: 10mm, 20mm, 40mm • Segmented gooseneck set: H 120mm • Motorized bending beam adjustment • Hydraulic tool clamping • Programmable backgauge 10–1000mm All information provided without guarantee. A live demonstration is possible at any time in our showroom.

Condition: used, Year of construction: 2000, Empty weight: 22.000 kg Price: On request Working width: 1500mm Working length: 2160mm Max. thickness: 2mm Dsdsww Eqcopfx Addjla With Supply-station infeed. - Year: 2000 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 12/50 - Motor power: 18.0kW - Transport weight [kg]: 22000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1991, degree of automation: semi-automatic, actuation type: electric, working width: 3,000 mm, bending angle (max.): 165 °, sheet thickness steel (max.): 2 mm, back gauge: 1,150 mm, overall weight: 3,900 kg, total length: 4,300 mm, total width: 2,400 mm, total height: 1,700 mm, type of input current: three-phase, stroke length: 280 mm, Equipment: emergency stop, foot remote control, We are selling our folding bending machine Kramer AMaut III 3000/2 due to a new purchase. The machine has a motorized back gauge from 10 mm to 1150 mm. The top beam can be equipped with different bending bars, including a 135° gooseneck bar with 150 mm free edge, a flat 135° bar, and a 165° bar. Further details can be requested. Dledpfxewr D Ivo Addoa The bending machine is available immediately. The bending machine can be tested on site with us. The machine is sold excluding any warranty or guarantee. A return is not possible. 'Sold as seen' applies. Transport must be organized by the buyer.

Condition: used, Year of construction: 1965, Press brake, folding bench, bending press Dedpfx Aownhu Esddsla Model: Hydraulic Manufacturer: RAS Type: 70/1 Working width: 2040mm Capacity: 5mm Max opening height: 90mm Back-gauge: 600mm Hydraulische Motor: 3kW Machine-dimensions: 3500x1300x2350mm Machine-weight: 3500kg - Year: 1965 - Documentation available: No - CE certificate present: No - Serial number: 16212 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2006, total length: 1,850 mm, total width: 1,700 mm, total height: 1,300 mm, Empty weight: 1.000 kg Working width: 1050mm Dledpfx Adjwk Iqlodsa Max. sheet thickness: 4mm Backgauge: 900mm - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 2607 - Transport dimensions: 1850mm x 1700mm x 1300mm (l x w x h) - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum