More technical data on request
T9y0ilmx
wheel diameter 900 mm
depth 900 mm
width 940 mm
height 1.050 mm
Gcxka3v
Disc-Ø: 900 mm
Depth: 900 mm
Height: 1.050 mm
Width: 940 mm
table diameter 340 mm
table load 160 horizontal kg.
table load 100 vertikal kg.
swivelling range 0 - 90 Grad
turning speeds 0,6 - 6,0 U/min
bore 60,0 mm
motor 230 Volt
weight of the machine ca. 56 kg.
range L-W-H 385 x 340 x 375 mm
Furnishing:
- The table can be adjusted at an angle of 0 to 90 degrees
tilt and jam
- Start / stop via a location-independent foot switch.
- Direction of rotation can be selected right / left.
- Adjustable rotation time
- The turntable has a 60 mm hollow shaft
- T...
table diameter 900 mm
table load 1 t
swivelling range 0-135 Grad
excentricity 200 mm
table turning speeds 0,12 - 1,2 U/min
Torque 2000 N/m
total power requirement 0,75 kW
dimensions of the machine ca. 1,5 x 1,020 x 0,9 m
Mu2clc
table length 2400 mm
table width 1200 mm
table height 200 mm
3D welding table - 3D clamping devices - 3D precision welding table
Our welding tables are milled out of HT 300 cast iron pipes and then nitrided.
The thermochemical treatment process of nitriding offers a wear-resistant and
corrosion-resistant surface.
Compared to other products, the nitriding treatment can double the wear
resistance.
This precision welding table D 28 made of HT 300 cast iron is designed in such
a way
that i...
table height: 800 mmmessurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 355
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enab...
Dimensions : 3980x1150x115mm
Btyzs79fjq
total power requirement 230 Volt
table diameter 300 mm
table load 100 Horizontal kg
swivelling range 0 - 90 Grad
turning speeds 0,2 - 2,0 U/min
turning speeds 1,2 - 12,0 U/min
bore 20,0 mm
weight of the machine ca. 50 kg
dimensions of the machine ca. 480 x 325 x 470 mm
Furnishing:
- Precise drive unit with face plate, on a stable floor stand.
B2gb0lkt
- clockwise / counterclockwise
- 2 speed series, stepless
- Swivel range from 0 ° - 90 °. Manual tilt
- DC gear motor with worm gear, infinitel...
table diameter 700 mm
table load 0,6 t
swivelling range 0-90 Grad
excentricity 200 mm
table turning speeds 0,2 - 2 U/min
Bhfz7fidwz
Torque max. 900 N/m
total power requirement 0,37 kW
dimensions of the machine ca. 1,1 x 0,92 x 0,8 m
table length 4000 mm
table width 2000 mm
Bu8n0ocv
table height 200 mm
3D welding table - 3D clamping devices - 3D precision welding table
Our welding tables are milled out of HT 300 cast iron pipes and then nitrided.
The thermochemical treatment process of nitriding offers a wear-resistant and
corrosion-resistant surface.
Compared to other products, the nitriding treatment can double the wear
resistance.
This precision welding table D 28 made of HT 300 cast iron is designed in such
a w...
table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 481
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
Dimensions: 5030x1150mm x 100mm
Zjaezrk
table diameter 500 mm
table load 300 horizontal kg.
table load 150 vertikal kg.
swivelling range 0 - 90 Grad
turning speeds 0,2 - 2,5 U/min
bore 90,0 mm
table height ~ 650 mm mm
motor 230 Volt
weight of the machine ca. 90,0 kg.
range L-W-H 385 x 340 x 375 mm
Furnishing:
- The table can be tilted and clamped at an angle of 0 ° to 90 °
- manual tilting
- Start / stop via location-independent foot switch
- Direction of rotation can be selected right / left
- Adjustable rotation time
- The contro...
table diameter 690 mm
table load 05 t
swivelling range 0-90 manuell Grad
table load horiz. 500 Kg
table load vert. 250 Kg
boring diameter 100 mm
table turning speeds 0,25 - 2,5 U/min
voltage 230 / AC V
Bjbeffbtei
total power requirement 0,4 kW
Clamping plate, welding table, welding table, straightening plate, straightening table
-Table thickness: 21 mm
-Table: 1530 x 1400 mm
-Height: 810 mm
Npgpt
-Weight: 404 kg
table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 375
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
Stierli- ROTATOR 2000 / 12 to
360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, grinding, fast welding visual inspection, as assembly turning device etc....
Capacity: 12 tons
Swing circle diameter: 2000 mm
Gegyiyvga
Length of parts: freely selectable (stands are freely positionable)
Adjustment of working height: Steplessly adjustable
The Stierli rotator was developed to turn heavy and large loads such as beams and welded co...
table diameter 1400 mm
Jwhwry
table load ca. 3000 kg.
swivelling range 0 - 130 Grad
total power requirement 380 Volt
* current new price approx. 17,000 euros
Furnishing:
- heavy welding turntable and tilting table
- Robust construction
- stepless speed adjustment
- Cable remote control
table diameter 350 mm
table load 0,1 t
Bjbd8thxls
swivelling range 0-90 Grad
table load horiz. 0,1 t
table load vert. 0,05 t
boring diameter 30 mm
table turning speeds 0,6 - 6 U/min
voltage 230 V
total power requirement 0,2 kW
weight of the machine ca. 0,2 t
dimensions of the machine ca. 0,5x 0,5 x 0,5 m
Technical data:
Load capacity horizontal: 25.000 kg
Biusgfumlp
vertical load capacity: 15.000 kg
face plate: diameter 2400 mm
rotatable: 360
Rotation speed: 0.01 - 0.4 rpm.
tiltable: 90°
Dimensions (length x width x height): 2600 x 7000 x 900 mm
Weight: 5 to
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear and tear according to its age; used machines are sold without any warranty.
table height: 800messurements (LxWxH): 1450 x 950 x 800table width: 950table length: 1450weight approx.: 288
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
Stierli- ROTATOR 600 / 6 to
360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc....
Bttlv8lhn9
Capacity: 6 tons
Swing circle diameter: 600mm (e.g. beam HEB 600)
Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck)
Adjustment of working height: Steplessly adjustable
The Stierli rotator was developed to turn he...
table diameter 340 mm
table load 290 horizontal kg
table load capacity 190 vertikal kg
turning speeds 0,6 - 6,0 U/min
spindle bore 60,0 mm
Djkjkcr
swivelling range 0 - 90 Grad
weight of the machine ca. 62 kg
dimensions of the machine ca. 380 x 340 x 425 mm
Furnishing:
- The table can be tilted and clamped at an angle of 0 to 90
- Start / stop via a location-independent foot switch.
- Direction of rotation can be selected right / left.
- Adjustable rotation time.
- The turntable has a 60 mm ho...
table length 3000 mm
table width 1500 mm
table height 200 mm
weight of the machine ca. 1,6 t
The table Professional Extreme Article no. 7 3000x1500x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides.
The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.
The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at ...
Technical data:
Load capacity: 10 tons
table dimensions: 1500 x 1500 mm
working height: 1400 mm
Table inclination: 90°
Dimensions (length x width x height): 2500 x 1900 x 1400 mm
Weight: approx. 6.000 kg
The seller is not liable for writing or data transmission errors. The machine is in appearance, technology and wear and tear according to its age; used machines are sold without any warranty.
Bkm7ep7zff
table height: 800 mmmessurements (LxWxH): 1980 x 1480 x 800table width: 1480table length: 1980weight approx.: 530
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
table-size 500 mm
weight max. in kg ca. 500 kg
2 Stück
Bslzowt2vh
weight of the machine ca. 350 kg
table diameter 1200 mm
table load 1,2 t
swivelling range 0 - 120 Grad
turning speeds 0,06-0,6 U/min
max. torque on the faceplate 2400 Nm
table pass 200 mm
welding current 500 Ampere
total power requirement 0,75 + 1,1 kW
weight of the machine ca. 1,0 t
ELDING TABLE WITH LARGE THROUGH BORE
Self-locking gearbox, no pre- or after-run with eccentric load.
Electronic components from Siemens and Schneider.
Frequency-controlled, very accurate speed control.
Oc3g2
Turntable with large through ...
table length 3000 mm
table width 1500 mm
table height 200 mm
weight of the machine ca. 1,6 t
The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides.
The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N.
Grid lines at intervals of 100 mm make it easier for you to set up your device.
The welding tables are provid...
table length 1000 mm
table width 1000 mm
table load 1,5 t
flange diameter 700 mm
turning speed max. 0,04 U/min
weight of the machine ca. 1,2 t
dimensions of machine L x W x H 1,60 x 2,0 x 1,50 m
Beog0eajjf
table height: 800messurements (LxWxH): 1400 x 900 x 800table width: 900table length: 1400weight approx.: 235
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
Demmeler 3D welding table PROFIEcoLINE -28mm
-year of construction : 2018
-Size : 2400x1200
-Standard base
-Accessories:
-PPS stud 21+20 pcs Demm/Sieg
-universal stop small 100x50x25 -2 pcs.
-universal stop large 225x50x25 -16 pcs.
-shifting stop 150x50x25 -8 pc
-stop bar 800x100x25 -2 pc
-stop and clamping bracket bore/long hole 175x175x50 -9 pcs
-stop and clamping angle large bore/long hole 275x175x50 -4 pc
-stop and clamping angle cast 300 300x275x100 -2 pcs
-stop and clamping angle Siegmund ...
table diameter 1500 mm
table load 5,0 t
swivelling range 0 - 135 Grad
turning speeds 0,05 - 0,5 U/min
max. torque on the faceplate 10000 Nm
table pass 200 mm
Blnsaazjde
welding current 700 Ampere
total power requirement 1,5 + 3,0 kW
weight of the machine ca. t
ELDING TABLE WITH LARGE THROUGH BORE
Self-locking gearbox, no pre- or after-run with eccentric load.
Electronic components from Siemens and Schneider.
Frequency-controlled, very accurate speed control.
Turntable with large thro...
table length 3000 mm
Dsimkch
table width 1500 mm
table height 200 mm
weight of the machine ca. 1,55 t
plasma-nitrided, the Professional 750 table has a hole arrangement in a 50 mm grid on the table top and a parallel hole arrangement in a 25 mm grid on the sides. The holes have a diameter of 16 mm.
Bnkeoswx2q
The table has a material thickness of approx. 11.5 - 13 mm and is made of high-quality steel S355J2+N. Grid lines at intervals of 50 mm make it easier for you to assemble your fixture.
Space requirement: 1500 x 1000 x 100 mm
Machine weight: 281 kg
table height: 800 mmmessurements (LxWxH): 2980 x 1480 x 800table width: 1480table length: 2980weight approx.: 850
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus en...
table load 20 Tonnen
engine output 4,8 kW
weight 8.300 kg
range L-W-H 2,4 x 3,7 x 3,0 m
Furnishing:
- d on the faceplate (horizontal) 20 tons
- stepless speed control
- Operation via remote control bottle
- faceplate diameter 2000 mm
Bg9i8dzibt
- drive power. 4.8 kW (new worm wheel)
- Frequency converter control with synchronization
The electrics, the brake motor, and the motor of the
The rotating movement of the faceplate has been overtaken.
The turntable is suitable for large turning diam...
table diameter 1400 mm
table load 2,0 t
swivelling range 0 - 135 Grad
turning speeds 0,05 - 0,5 U/min
max. torque on the faceplate 6000 Nm
table pass 200 mm
welding current 700 Ampere
total power requirement 1,1 + 2,2 kW
weight of the machine ca. t
ELDING TABLE WITH LARGE THROUGH BORE
Self-locking gearbox, no pre- or after-run with eccentric load.
Electronic components from Siemens and Schneider.
Frequency-controlled, very accurate speed control.
Turntable with large through hole and...
table length 3000 mm
table width 1500 mm
table height 200 mm
weight of the machine ca. 1,6 t
Flqhhzsp
The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides.
The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel.
The low-loaded sidewalls are still made of steel S355J2 + N...
table diameter 2.000 mm
2.500 mm
table load 2 t
digital
Bt8gkvqd7e
documentation
weight of the machine ca. 8 t
table height: 800messurements (LxWxH): 1950 x 950 x 800table width: 950table length: 1950weight approx.: 285
Special workbench systems from the SST, SFT and SWT fix series as 3D clamping workstations for the rational manufacture of assembly, welding and adhesive structures, e.g. Devices, railings, frames etc. With the help of the extensive range of clamping devices (see catalog section welding table accessories) these table systems can also be used as flexibly upgradable devices and thus enable ...
This may be of interest to you
How to receive 100% of our e-mails
Morlock Motors official partner of Machineseeker and Truckscout24
