Michano Import

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Working Area Control: Fanuc 31i-B5 Travel X: 700 mm Travel Y: 400 mm Travel Z: 400 mm Clamping Table Surface: 850 x 410 mm Max. Table Load: 400 kg Rapid Traverse X/Y/Z: 54 m/min Positioning Accuracy: 0.006 mm Nkjdsydi Hyopfx Adwjt Repeatability: 0.004 mm Spindle Technology: Direct Drive Max. Speed: 24,000 rpm Max. Power: 26 kW Max. Torque: 35 Nm Tool Holder: BBT 30 Tool Changer Tool Magazine: 21 stations Tool Change Time: 1.3 s Equipment Automation Prepared: Automatic loading door (pneumatic) Chip Management: Chip conveyor Coolant Supply: Through spindle coolant, 20 bar Workpiece Measurement: Renishaw OMP 400 Tool Measurement: Renishaw Laser NC 4 Warranty: 12 months

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Nksdpfsydil Nex Adwjt Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: ready for operation (used), Year of construction: 2007, Make: HURCO Type of machine: VMX30 Year of manufacture: 2007 Control system: WinMax Tool holder: SK 40 x-travel: 760 mm y-travel: 510 mm z-travel: 610 mm Speed range: 10.000 U/min max. Table load: ca. 750 kg Table dimensions: 1.000 × 500 mm Number of tools in the magazine: 24 Pl. Njdpfxoydd Skj Adwskt

Condition: ready for operation (used), Year of construction: 2006, operating hours: 3,857 h, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, controller manufacturer: OKUMA, controller model: OSP P200M, spindle speed (max.): 15,000 rpm, spindle motor power: 22,000 W, number of axes: 5, This 5-axis Okuma MU-400V was manufactured in 2006. It features a spindle drive of 15,000 rpm, a 32-position tool changer, and an internal coolant supply at 15 bar. The machine includes a dual screw chip conveyor, tool breakage monitoring, and an Okuma OSP P200M control system. Ideal for complex machining tasks with its robust 5-axis capability and high-speed operations. Contact us for more information about this machine. Technical Specification Nodpfx Ajydcdfedwjkt Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 550 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are offering this ready-to-use Mas Kovosvit MCU 630 in Germany, marketed as a vertical machining center, year of manufacture 2008. In Germany, this 5-axis milling machine was sold under the name Wemas VZU 630 SA. Manufacturer: Mas Kovosvit MZU / 630 Wemas Model: MZU 630 / VZU 630/SR Year of manufacture: 2008 Condition: ready for use Category ID: 1451 Type ID: 4156 Machine type: vertical machining center Price is ex-works, excluding packaging. The price is net plus statutory VAT, ex location, excluding transport insurance and packaging, and is offered without any warranty. Nksdpfx Aoycwl Iedwot Terms of payment: strictly net, payable prior to loading. We reserve the right to correct any errors in the technical data. The machine should be inspected in advance. The scope of accessories is limited exclusively to what is described in the article description. There is explicitly no claim to any accessories shown for illustration purposes, unless expressly stated. If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) Nksdpoycuiqjfx Adwot - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Software & Control: - High-Speed Machining (HSM) - Ethernet interface - Macros - Coordinate rotation and scaling

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 653 mm, controller manufacturer: SIEMENS, number of axes: 3, This 3-axis MIKRON VCE 750 was manufactured in 2001. It features a table size of 914 × 356 mm, with X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 653 mm. If you are looking to get high-quality milling capabilities, consider the MIKRON VCE 750 machine we have for sale. Contact us for further details regarding this machine. • Table size: 914 × 356 mm Nsdpfx Aoych Rnsdwskt

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,734 h, functionality: fully functional, machine/vehicle number: MV-0090-000559, travel distance X-axis: 800 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, torque: 117 Nm, controller manufacturer: Fanuc, total height: 2,500 mm, total length: 3,600 mm, total width: 2,500 mm, table width: 1,000 mm, table length: 450 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 20 bar, number of spindles: 1, number of slots in tool magazine: 30, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Used DOOSAN DNM4500. In great working order. Nedpfoyccryex Adwekt Renishaw probe system OMP 60

Condition: used, Year of construction: 2016, x-travel 762 mm Njdpfeyb S Inex Adwokt y-travel 406 mm z-travel 508 mm control Haas

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, Integrated 4th and 5th axis Direct measuring system for A and C axes Nksdpfx Aoyba Dqjdwst Coolant system Spindle cooler 40-position tool changer Through-spindle coolant (IKZ) 5-axis simultaneous programming and machining Machine operating time: 2163 hours Further technical details available on request.

Condition: good (used), Year of construction: 2018, 1 used 3-axis CNC machining centre, make HURCO, model VMX 84 I, year 2018, S/N S84916201C8FFBCA, XYZ travels 2,135x865x762 mm, max. spindle speed 12,000 rpm, 90-position tool changer, machine weight approx. 17,570 kg, mobile operator platform, chip conveyor, coolant unit. Nkedpeya Up Sjfx Adwst

Condition: excellent (used), Year of construction: 2019, operating hours: 5,500 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, controller manufacturer: Siemens, controller model: Sinumerik 840 D, table width: 410 mm, table length: 900 mm, table load: 350 kg, rotational speed (min.): 10 rpm, rotational speed (max.): 12,000 rpm, overall weight: 4,000 kg, spindle speed (min.): 10 rpm, spindle speed (max.): 12,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, Vertical machining center Spinner VC 750 from training facility Year of manufacture: 2019 Control: Sinumerik 840D Njdoya H Tcopfx Adwokt Technical specifications Spindle speed: 10 - 12,000 rpm Drive power: 11/17 kW Tool holder: SK 40 Number of magazine positions: 24 Table size: 900 x 410 mm Travel distances: X-axis: 750 mm Y-axis: 460 mm Z-axis: 460 mm Equipment: Electronic handwheel Coolant system (KSS) Chip conveyor Prepared for 3D probe – receiver available

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, table load: 400 kg, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS X-axis: 760 mm Y-axis: 400 mm Z-axis: 400 mm Table size: 1,020 x 410 mm Max. table load: 400 kg Spindle speed: 8,000 rpm Tool holder: CAT 40 / BT 40 Tool changer: 20 positions Accuracy Positioning accuracy: ±0.01 mm Repeatability: ±0.005 mm MACHINE DETAILS Control: MAZATROL M-PLUS EQUIPMENT Nksdsya Dw Sopfx Adwot Robust construction Fully hydraulic table Stable cast iron structure Suitable for aluminium, steel and plastics User-friendly programming Integrated simulation and diagnostic software Regularly serviced Coolant and lubrication systems intact

Condition: used, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, Machine parameters: Travels in X, Y, Z axes: 1270 x 660 x 610 mm Table clamping area: 1500 x 660 mm Description: The machine is in good technical condition. Testing is possible by prior arrangement. Supported systems: MAX4 with WinMax v8, control language completely in Czech. 3D simulation: Yes. Programming type: Dialog and NC. TABLE Table dimensions: 1,500 x 660 mm T-slots: 6 x 18 mm Maximum table load: 1,350 kg Distance from spindle nose to table: 150 - 760 mm TRAVELS X axis: 1,270 mm Y axis: 660 mm Z axis: 610 mm A axis: 360 Nkjdpfx Adsyarahewot SPINDLE Maximum spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Spindle taper: SK 40 TOOL MAGAZINE Number of tools: 40 Max. tool diameter: 75 / 125 mm Max. tool weight: 7 kg FEED Rapid traverse X/Y/Z: 30 / 30 / 20 m/min Working feed X/Y/Z: 15 m/min ADDITIONAL MACHINE DATA Dimensions (W x D x H): 3,250 x 2,220 x 2,950 mm Weight: 9,400 kg

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, spindle speed (min.): 16,000 rpm, 4 pcs CNC Brother model S500X1/S700X1. Year of manufacture: 2012, 2013 and 2014. Njdsyap R Dspfx Adwekt

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 305 mm, feed length X-axis: 762 mm, feed length Y-axis: 406 mm, feed length Z-axis: 305 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 406 mm - Z-axis travel: 305 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 507 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system Nkjdpfx Adeyanlajwst - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, number of axes: 5, This 5-axis HAAS UMC 750SS vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a CT 40 cone type, and a tool magazine with 40 + 1 places. Additional features include internal cooling and a chip conveyor. A great opportunity to buy this HAAS UMC 750SS vertical machining center. Contact us for further details regarding this vertical machining center. Nodpfxsyalkmo Adwskt Extra Information Machine still under power Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, This 5-axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideal for precision machining, it offers robust construction and advanced control technology. If you are looking to get high-quality milling capabilities, consider the HAAS VF 2 SS YT machine we have for sale. Contact us for more information. Additional equipment • Type: Side-Mount (SMTC)/ Capacity: 30+1/ Max Tool Diameter (full): 64 mm/ Max Tool Diameter (adjacent empty): 127 mm/ Max Tool Length: 279 mm /Max Tool Weight: 5.0 kg • Tool-to-Tool (avg): 1.80 s/ Chip-to-Chip (avg): 2.40 s • Included: HRT210 Machine Benefits Technical Machine Benefits • Torque: 122 nm at 2000 rpm Njdpfxeyaix Us Adwjkt • Drive system: inline direct-drive • Taper: bt40 / ct40 / hsk-a63 • Lubrication: air/oil injection/cooling: liquid-cooled • Max cutting feedrate: 21. 2 m/min / rapids on x, y, z-axis: 35. 6 m/min • Coolant tank capacity: 208 l / through-spindle coolant pressure: 21 bar / through-tool air blast: yes / chip auger: yes / chip tray filter kit: yes / window air blast: yes / coolant pump: multi-stage • Air consumption: 113 l/min at 6. 9 bar / minimum air pressure: 5. 5 bar / air hose connection: 3/8 in • Standard interface: ethernet and wifi / control memory: 1 gb / remote monitoring: haasconnect / high-speed machining: included / advanced tool management: included /media display (m130): included / power failure detection: included /safe run function: included / rigid tapping: included

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, controller manufacturer: HAAS, controller model: na, spindle speed (max.): 8,000 rpm, spindle motor power: 7,500 W, number of axes: 4, This 4-axis HAAS MIKRON VCE 750 was manufactured in 2000. It features a table surface of 900x350 mm, a spindle speed of 8000 rpm, and a spindle motor power of 7.5 kW. Equipped with a conversational HAAS CNC, electronic handwheel, and a chip conveyor screw type, this vertical machining centre is ideal for detailed and precise machining tasks. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Table surface: 900x350 mm • Table weight: 340 kg Nedoyaitfjpfx Adwjkt • Electronic handwheel • 3-color status light • Chip conveyor: screw type • Programmable coolant nozzle • 4th axis: 360000° Extra Information Full Documentation

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 5, This 5-axis HAAS UMC-750SS vertical machining center was manufactured in 2021. Consider the opportunity to buy this HAAS UMC-750SS vertical machining center. Contact us for more information. Additional equipment Nsdpex U Tizofx Adwskt • Coolant tank – 208 liters with mobile cart • Programmable coolant pump (M-code controlled) // Programmable Coolant Nozzle (P-COOL) • Safe Run – crash and overload detection system • Control cabinet surge protection • Voltage fault detection module (EPFDM) • Second Home Position button • Remote Jog Handle with 2m cable (RJH-XL) • Memory lock key-switch • Rotary axis scales • Top cover Machine Benefits Technical Machine Benefits • 30+1 tool side-mount tool changer • Wireless intuitive probing system (wips) • Broken tool detection (btd) Extra Information Media display via M130 (images, videos, PDF on screen) Standard machine memory: 1 GB Control Unit 15" color LCD monitor with USB port Touchscreen control interface Ethernet interface HaasConnect remote monitoring HaasDrop wireless file transfer WiFi connectivity Controller High-speed machining (HSM) Rigid tapping Dynamic Work Offsets / Tool Center Point Control (DWO/TCPC) Macro programming, coordinate rotation & scaling

Condition: good (used), Year of construction: 2015, In good technical condition and fully functional. Year of manufacture: 2015. Max. table load capacity: 1,814 kg. X-axis: 2,134 mm, Y-axis: 813 mm, Z-axis: 762 mm. Spindle: 8,100 rpm. Operating hours: 4,770 h. M30 counter: 83,396. Control system: Inline Direct-Drive. Distance between spindle nose and table (~ max): 864 mm. Distance between spindle nose and table (~ min): 102 mm. Nedpfx Aox U Tf Nedwekt

Condition: ready for operation (used), Year of construction: 2000, operating hours: 11,426 h, travel distance X-axis: 750 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 500 mm, total height: 2,690 mm, overall weight: 4,200 kg, product length (max.): 2,400 mm, This 3-axis MIKRON VCE 750 was manufactured in 2000. It features a vertical milling machine setup with X-axis travel of 750 mm, Y-axis travel of 410 mm, and Z-axis travel of 500 mm. The spindle supports a maximum speed of 7,500 rpm with a power of 7.5 kW. It includes a tool magazine with a capacity of 20 tools. If you are looking to get high quality milling capabilities consider the MIKRON VCE 750 machine we have for tact us for more information. • Length: 900 mm • Width: 350 mm Nsdex Uz Sdopfx Adwokt • Maximum Load: 340 kg • Spindle Taper: ISO 40 • Maximum Spindle Speed: 7500 rpm • Spindle Motor Power: 75 kW • Tool Magazine Capacity: 20 tools Dimensions Machine Depth 2300 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 2,153 h, functionality: fully functional, machine/vehicle number: 1125367, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 5 Axis Vertical Machining Centre with Haas CNC Control, Nkodpfxsx Uznfj Adwot 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, C Axis 360deg Rotation, B Axis -35deg to + 100deg, Spindle Speed 12,000rpm, 40 Tool ATC , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1125367 (2015). Wireless probing.

Condition: new, Year of construction: 2026, 0760 mm Nedpfxex Urt Ss Adwekt 450 mm 500 mm 900x450 mm BBT 40 10.000 U/min Motor Capacity 7,5/11 kW max. table load 850 kg

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, table load: 680 kg, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 762 mm Travel Y-axis: 406 mm Travel Z-axis: 508 mm Table length: 914 mm Table width: 356 mm Table load capacity: max. 680 kg Spindle speed: 12,000 rpm Feed Rapid traverse X-axis: max. 35.6 m/min Rapid traverse Y-axis: max. 35.6 m/min Rapid traverse Z-axis: max. 35.6 m/min Tool Changer Capacity: 24+1 Tool holder: CAT 40 Max. tool diameter: 76 mm Tool change time: 1.6 s Nksdpfx Adjx Up Dhewjt Chip-to-chip time: 2.2 s MACHINE DETAILS Machine weight: 3,629 kg