Used centers (universal) 600-699mm (x-travel) for sale (64)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 630 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 860 mm, rapid traverse X-axis: 120 m/min, rapid traverse Y-axis: 120 m/min, rapid traverse Z-axis: 120 m/min, feed length X-axis: 630 mm, feed length Y-axis: 730 mm, feed length Z-axis: 860 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, feed rate Z-axis: 120 m/min, nominal power (apparent): 70 kVA, torque: 1,400 Nm, controller manufacturer: Siemens, controller model: 840D SL, workpiece height (max.): 640 mm, workpiece diameter (max.): 700 mm, workpiece weight (max.): 290 kg, total height: 3,650 mm, total length: 5,650 mm, total width: 3,560 mm, table width: 400 mm, table length: 400 mm, table load: 290 kg, rotational speed (max.): 80 rpm, overall weight: 25,000 kg, distance between spindles: 720 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, For sale is a high-performance, two-spindle CNC machining center, MAG SPECHT 500 DUO LIMO PW, manufactured in 2017, with a pallet changer, two working spindles, and 5-axis machining capabilities. The machine has been used infrequently recently and is currently not in active production. It remains connected to the power grid, so an inspection while powered on is possible by appointment. Manufacturer: MAG / FFG Hjdpfx Ajz Ar E Islwju Model: MAG SPECHT 500 DUO LIMO PW Year of manufacture: 2017 Condition: very good (original images dated September 15, 2026) Operating hours: 17,690 h Category ID: 1458 Type ID: 4166 Machine type: Universal machining center Technical data: Year of manufacture: 2017 Machine number: X.0112.6258 Control system: Siemens 840D SL Number of spindles: 2 Machining: 5-axis Design: LIMO PW Pallet changer Tool holder: HSK-A63 Travel in X: 630 mm Travel in Y: 730 mm Travel in Z: 860 mm Axis speed X/Y/Z: up to 120 m/min Spindle distance: 720 mm B-/A-axis: up to 80 rpm B-axis division: 360° x 0.001° Pallet size: 400 x 400 mm Table/pallet load: 2 x 290 kg Max. weight moment at 90°: 1,400 Nm Max. workpiece and fixture height with pallet changer: 640 mm Max. clearance circle workpiece/fixture: 2 x 700 mm Tool magazine: 112 tool positions for HSK-A63 Tool diameter with full load: 75 mm Tool diameter with empty spaces: 230 mm Max. tool length: 550 mm Max. tool weight: 12 kg Total weight of tools in the magazine: max. 420 kg Accuracy / Measuring system: Linear measuring system X/Y/Z: 0.0001 mm Positional accuracy: 0.005 mm Positional repeatability: 0.004 mm Machine dimensions: Width: approx. 3,560 mm Length: approx. 5,650 mm Height: approx. 3,650 mm Machine weight: approx. 22,000–25,000 kg Electrical rated power according to nameplate: 70 kVA Operating voltage: 400 V / 50 Hz If you have any questions or need more information, please send us a message or call us. Inspection while powered on is possible by appointment in 36199 Rotenburg an der Fulda. Technical documentation is available. Sale from the current location. Dismantling, loading, and transport can be arranged. Subject to prior sale, errors, and changes in technical specifications.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 7,358 h, functionality: fully functional, machine/vehicle number: 6LUD00036, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, feed length X-axis: 620 mm, feed length Y-axis: 620 mm, feed length Z-axis: 460 mm, feed rate X-axis: 36,000 m/min, feed rate Y-axis: 36,000 m/min, feed rate Z-axis: 36,000 m/min, torque: 108 Nm, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece length (max.): 500 mm, workpiece width (max.): 400 mm, workpiece height (max.): 350 mm, workpiece diameter (max.): 680 mm, workpiece weight (max.): 300 kg, total height: 3,400 mm, total length: 4,600 mm, total width: 2,700 mm, table width: 600 mm, table height: 755 mm, table length: 600 mm, table load: 300 kg, rotary table diameter: 600 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 8,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 5,303 h, coolant supply: 18 bar, distance table center to spindle nose: 50 mm, spindle motor power: 17,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 100, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Commissioned 4/2014 Table rotation, C-axis: 360° Table swivel, B-axis: -50° to +110° Distance from spindle nose to table: 150 mm Table clamping surface: Ø 650 Table load capacity, max.: 300 kg Table slots: 5 x 18H7 x 100 mm Centering bore: Ø 50 H7 x 30 mm Workpiece size, max.: Ø 520 x 330 mm Machine accuracy: VDI I DGQ 3441* Positioning accuracy: +/- 0.006 mm* Axis resolution: 0.001 mm* *determined at a constant ambient temperature of 20°C +/- 1°C Main spindle: Main drive, AC motor, direct drive Drive power (100% / 25% ED): 10.0 / 17.0 kW Speed range, stepless: 20 - 12000 rpm Spindle taper: SK 40 DIN 69871 Torque at (100% / ED): 63.7 / 108.6 Nm Axis drives: Axes X, Y, Z: AC motors Axes B, C: AC motors Travel speeds: Rapid traverse in axes X, Y, Z: 36 m/min Speed, max. B-axis: 25 rpm Speed, max. C-axis: 25 rpm Acceleration X, Y, Z: 6.5 m/s² Coolant system: External tool cooling via external nozzles Coolant tank: 280 l Operating pressure, external: 0.9 bar Coolant system, internal tool cooling DIN 69871 Form A Operating pressure, internal coolant supply: 18.0 bar Manual rinsing of the work area via an additional gun Standard accessories: - CNC control: Heidenhain iTNC 530, full simultaneous 5-axis version - Handwheel 410 (Heidenhain) - Digital axis drives - Digital spindle drive - Swarf conveyor with discharge height 800 mm • Spindle cooling – radiators – plate cooling for spindle motor - Full protective enclosure with cabin roof Tool magazine VZG 65 5A by Indunorm: Number of tools: 100, with a tool length of up to 320 mm / can be converted to 125 tools, then a tool length of only 200 mm is possible. Tool diameter, max.: 80 mm Tool diameter, max.: 130 mm (with free adjacent positions) Tool change with double gripper - Linear path measuring system in axes X / Y / Z (glass scale) - Direct encoder in axes B / C - Temperature compensation - IR measuring probe – 3D Software - Option - iTNC 530 Kinematic-Opt • Calibration software Internal tool cooling 18 bar • Coolant tank • Internal tool cooling: 280 L DIN 69871 Form A • Double-circuit filter • Switchable filter cartridges • Filtration rate: 10 µm Band filter system Hsdpfx Aljz Diq Uewju PRODUCTION - LINE - RT 100 Automatic pallet changing system Loading and unloading via a linear axis system: Handling data: Handling weight, max.: 100 kg (35 kg) Pallet capacity: 6 pallet positions up to 400 x 400 mm: Control: PLC control with integrated control cabinet incl. switching and control components incl. software for the automatic sequence Zero point clamping system 320 x 320 x 60 mm - Clamping via 4 clamping bolts - Axis distance: 180 mm - Clamping force: 4 x 12500 N - Repeatability: 0.005 mm - Axial load, max.: 4000 kg • Zero point clamping plate 320 x 320 - Automatic door Interface for automation and clamping systems Universal interface for automatic pallet changing systems, force clamping devices and zero point clamping systems • for pneumatic clamping systems • 2-channel rotary feedthrough integrated in the table • Pneumatic lines led to the outside • Pneumatic maintenance unit • Control via M commands logical inputs and outputs prepared incl. 7 pallets 320x320 with 6 vices and one 3-jaw chuck !!without tool holders and without tools!! Machine ex works, without delivery and assembly, all information without guarantee, price plus statutory value-added tax.

Condition: like new (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: MAZATROL 640M 5X, controller model: MAZATROL 640M 5X, workpiece height (max.): 405 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 300 kg, table width: 400 mm, table length: 500 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,000 W, spindle nose: CAT40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, *MAZAK VARIAXIS 500-5X 5 AXIS TWIN PALLET VMC* Category: Vertical Machining Centers (VMC) Reference No.: 3877 Capacity: 510 X 510 X 460 MM Year of Construction: 2003 Technical Specification: Hodpfx Aljx Adn Uowou SPINDLE Spindle Taper : CAT40 Spindle Speeds : 12000 RPM Spindle Motor Power : 30 HP WORKING CAPACITY Pallet Size : 500 x 400 mm Travels (XYZ) : 510 x 510 x 460 mm A Axis : -120 / +30 Deg C Axis : 0.001 Deg Max Workpiece Size : Ø500 x 405 High Max Workpiece Weight : 300 Kgs ATC Tool Change Capacity : 40 Tools (CAT40) CNC Control : MAZATROL 640M 5X PC-FUSION-CNC Additional Details: Twin Pallet

Condition: used, Year of construction: 2018, travel distance X-axis: 510 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 70 m/min, rapid traverse Y-axis: 70 m/min, rapid traverse Z-axis: 70 m/min, feed length X-axis: 510 mm, feed length Y-axis: 600 mm, feed length Z-axis: 700 mm, feed rate X-axis: 70 m/min, feed rate Y-axis: 70 m/min, feed rate Z-axis: 70 m/min, nominal power (apparent): 63 kVA, torque: 900 Nm, workpiece height (max.): 490 mm, workpiece diameter (max.): 535 mm, workpiece weight (max.): 200 kg, total height: 3,470 mm, total length: 4,150 mm, total width: 3,120 mm, table load: 200 kg, rotary table diameter: 450 mm, rotational speed (max.): 80 rpm, overall weight: 18,000 kg, distance between spindles: 540 mm, number of spindles: 2, number of slots in tool magazine: 112, tool length: 550 mm, tool diameter: 75 mm, tool weight: 12,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, We are offering this very well-maintained, twin-spindle, 5-axis machining center, MAG SPECHT 450 DUO, manufactured in 2018. Manufacturer: MAG / FFG Machine Type: SPECHT 450 DUO Year of Construction: 2018 Condition: very good Operating Hours: 15,908 hours Machine Number: X.0112.6552 Order Number: E.7500194.001 Wiring Diagram Number: E.7500194.001 Location: 36199 Rotenburg an der Fulda, Germany Inspection: possible under power The machine is designed as a highly productive, twin-spindle machining center for series production and features 5-axis machining, two working spindles, and HSK-A63 tool holders. Technical Data: Year of Construction: 2018 Machine Number: X.0112.6552 Number of Spindles: 2 Machining: 5-axis Tool Holder: HSK-A63 Travel X: 510 mm Travel Y: 600 mm Travel Z: 660 / 700 mm Axis Speed X/Y/Z: up to 70 m/min Spindle Distance: 540 mm B-/A-Axis: up to 80 rpm Hjdez Ar H Sepfx Alwju B-Axis Division: 360° x 0.001° Table Plate Diameter: 2 x 450 mm Table Load: 2 x 200 kg Max. Interference Diameter of Workpiece/Fixture: 2 x 535 mm Max. Workpiece and Fixture Height: 490 mm Max. Weight Moment at 90°: 900 Nm Tool Magazine: 112 tool positions HSK 63 Tool Diameter with Full Load: 75 mm Tool Diameter with Empty Spaces: 140 mm Max. Tool Length: 550 mm with front loading Max. Tool Weight: 12 kg Total Weight of Tools in Magazine: max. 420 kg Accuracy / Measuring System: Path Measuring System X/Y/Z: 0.0001 mm Positional Accuracy: 0.005 mm Positional Repeatability: 0.004 mm Machine Dimensions: Width: approx. 3,120 mm Length: approx. 4,150 mm Height: approx. 3,470 mm Machine Weight: approx. 16,000–18,000 kg Electrical Rated Power according to Nameplate: 63 kVA Operating Voltage: 400 V / 50 Hz The machine can be inspected under power at the Rotenburg an der Fulda location by appointment. Technical documentation is available. Sale from location. Subject to prior sale and errors in the technical data.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, X-axis: 650 mm Y-axis: 325 mm Z-axis: 350 mm B-axis: 130 degrees Hjdozapp Hspfx Alwou C-axis: 360 degrees Spindle speed: 30,000 rpm Spindle interface: HSK 50 Tool changer: 60 positions Control system: Makino Professional 5 Includes hybrid length measuring system Includes measuring probe Includes approximately 60 HSK 50 tool holders (MST + Rego Fix) Spindle has been replaced Ball screws for X and Y axes replaced in 2024 Machine currently has approximately 32,000 spindle hours and is still in active production Available from approximately week 46/2026 An inspection with the machine powered on can be arranged at any time.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 11,514 h, spindle speed (max.): 18,000 rpm, overall weight: 20,000 kg, travel distance X-axis: 670 mm, travel distance Y-axis: 820 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2021. It features an X-axis travel of 670 mm, Y-axis travel of 820 mm, and Z-axis travel of 600 mm. The machine is equipped with a Heidenhain TNC 640 control unit and has a maximum spindle speed of 18,000 rpm. If you are looking to get high-quality machining capabilities, consider the POSmill H 800 U universal machining centre we have for sale. Contact us for further details. Hodpfxjznktuj Alwju - Coolant Supply: 40 bar- Nominal Power: 90 kVA- Input Voltage: 400 V, 50 Hz (3-Phase)- Full Load Current: 125 A- Max. Current Load: 200 A- Short-Circuit Strength: 25 kA- Included Equipment: Documentation/Manual, Chip Conveyor, Coolant System & Filtration Unit- Condition: Very good, fully functional; completely inspected by manufacturer at the end of 2025 (receipts available)- Spindle Hours: 11,514 h- Machine Power-On Hours: 20,954 h- Control Power-On Hours: 22,231 h- Usage History: Exclusively soft-annealed tool steels (no hard or dry machining)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We offer you: CNC machining center, universal, with pallet automation Manufacturer: DMG MORI Type: DMU 50 3rd with PH Cell 150 Year of manufacture: Machine 2023 / Automation 2025 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 120 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 12,320 h Spindle hours: approx. 4020 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Scraper-type chip conveyor with cleaned filter screen - Internal coolant supply (IKZ) 40 bar, consisting of: Hjdpfx Alsz A A Dxewsu - Paper band filter - 600 l tank - Cabin roof - Rotary through-feed in the spindle - Double filter - Blow-off air through the spindle center - Rotating viewing window - Flushing gun for chip removal - Oil and emulsion mist separator - Infrared measuring probe, manufacturer Heidenhain TS 460 (if available) - Tool measurement system, manufacturer Heidenhain TT160 (if available) - Preparation for 3D quickSET - Automation interface PH Cell, consisting of: - Interface - 4-channel rotary through-feed - Automatic loading door - Operating mode 4 - Tracy surface interpolation - Pallet loading and unloading system PH 150, consisting of: - 10-position pallet storage - External electronic handwheel (if available) Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to change and errors in the technical data and information, as well as prior sale!

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, We offer you: CNC machining center, universal, with robotic automation Manufacturer: DMG MORI Hsdpfx Aoz A A E Nolwsu Type: DMU 50 3rd with Lang RoboTrex52 Year of manufacture: Machine 2017 / Automation 2021 Control system: Celos with Siemens 840D sl Operate Technical data: Travel ranges: X-axis: 650 mm Y-axis: 520 mm Z-axis: 475 mm B-axis: -35 to +110° C-axis: 360° Main spindle: Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (100/40%): 21 / 16 kW Work table: Table dimensions: D 630 x 500 mm Tool changer: Tool holder: SK 40 Number of tool positions: 60 Feed rates: Rapid traverse (x/y/z): 42 m/min Operating hours: approx. 32,000 h Spindle hours: approx. 12,000 h Technical features & accessories: - Active spindle cooling - Direct path measuring system in all axes - Drag chain chip conveyor - Internal coolant supply (IKZ) 40 bar, includes: - Paper band filter - Tank 600 l - Canopy - Rotary feedthrough in spindle center - Compressed air through the spindle center - Flushing gun - Oil and emulsion mist separator, mechanical - Infrared measuring probe, manufacturer Heidenhain TS 649 (if available) - Preparation for 3D quickSET - Operating mode 4 - ATC – Application Tuning Cycle - Tool breakage monitoring TRS2 (if available) - Tracy surface interpolation - Automation system Lang RoboTrex 52 Accessories, tools, and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: used, Year of construction: 2020, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2020 Control : Siemens 840 Dsl Speed : 17500 rpm Movement X/Y/Z : 600/650/500 mm Tool holder : HSK 63 Hjdpfx Aoz A N Ahjlwsu In General: Year of manufacture:2020 Control system:Siemens 840 Dsl Travel range X/Y/Z:600/630/500 Rapid traverse X/Y/Z:120 m/min Spindle: Technologie:Motorspindeln Drehzahl:17.500 U/min Leistung:35 Nm Drehmoment:80 Nm Werkzeugaufnahme:HSK-63 Swivel mount: Technology:A-axis or U-axis with counter bearing Drive:Direct drive (torque motors) Clamping bridge: Technology:Clamping bridge with 1x NC rotary table each Drive:Direct drive (torque motors) Table diameter:Ø 340 mm Max. table load:150 kg Max. fixture dimensions:Ø 675 x 450 mm Tool magazin: Technology:Chain magazine Tool changer:Pick-up Number of stations:105 Max. tool diameter:80 (160) mm Max. tool length:450 mm Equipment: Position measurement systems:Direct on all axes (glass scales) Drive systems:Direct on all axes (linear motors) Hydraulic clamping:2x 3-circuit Chip removal:Chip conveyor Coolant supply:IKZ system, 70 bar Coolant temperature control:Separate cooling unit Support control:Pneumatic Tool breakage detection:Inductive Automation preparation:Profinet interface, automatic doors, automatic rinsing cycle :

Condition: ready for operation (used), Year of construction: 2012, operating hours: 5,600 h, travel distance X-axis: 670 mm, travel distance Y-axis: 830 mm, travel distance Z-axis: 600 mm, overall weight: 20,000 kg, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis POSmill H 800 U was manufactured in 2012. It features a Heidenhain iTNC 530 control, a new spindle with 5,700 hours since 2021, and a robust 18,000 rpm spindle speed. The machine offers extensive travel with dimensions of 670/830/600 mm and supports 96 tool positions. Additional features include an internal coolant supply at 60 bar, a comprehensive coolant system, and a chip conveyor. Consider the opportunity to buy this POSmill H 800 U universal machining centre. Contact us for more information. Additional equipment • new spindle since 2021: only 5700 spindle hours (Wear-related spindle replacement) • Inspection under power possible Machine Benefits Hsdpfxox D Dx Ae Alweu Technical Machine Benefits • Through-spindle air flow • Internal coolant supply: 60 bar • Coolant system with 1000l paper belt filter • Rotating viewing window • Chip flushing gun // bed flushing • Oil mist extraction • Blum tool breakage/measurement • Heidenhain 3d touch probe • Mobile electronic handwheel • Kinematics package Extra Information Spindle replacement due to wear (new spindle: 5600 hours since 2021) Production Hours: Control on: approximately 33300 hours, Spindle on: 17050 hours (new spindle 5600 hours, replaced in 2021 due to wear) Tool Positions: 96 Includes tool holders (shrink-fit chucks, collets, etc.)

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Heidenhain, controller model: TNC640, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Demonstration machine Hedpfeywyqkox Alwsu Equipment of the Axon LU 620 - Heidenhain TNC640 - 5-axis simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production package I with 42 bar through-coolant (IKZ) - Air through the spindle - Media feed through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Laser tool breakage control Blum NT A-3 Split - Paper band filter system - Spindle ring flushing system - Automatic side door - 60 magazine positions - SK40 - Scraper-type chip conveyor - Chip flushing - Extraction system

Condition: used, Year of construction: 2008, Control: HEIDENHEIN iTNC 530 Hedpfxjz Dizmo Alwju Spindle: 35/47 Nm; 12,000 rpm Tool Holder: HSK-A 63 Tool Magazine: 40 positions (disc type) Travel (X/Y/Z): 600 / 770 / 805 mm The machine is currently in storage. The images shown may not reflect its current condition while in storage.

Condition: used, Year of construction: 2008, Control system: HEIDENHEIN iTNC 530 Hedpfx Asz Diz Hslweu Spindle: 35/47 Nm; 12,000 rpm Tool holder: HSk-A 63 Tool magazine: 40 positions (disc type) Travel (X/Y/Z): 600 / 770 / 675 mm The machine is currently in storage. The images shown do not necessarily reflect its current condition while in storage.

Condition: excellent (used), Year of construction: 2024, operating hours: 1,080 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, torque: 120 Nm, controller manufacturer: Heidenhain, controller model: TNC640, total height: 3,000 mm, total length: 3,600 mm, total width: 3,000 mm, table load: 300 kg, rotary table diameter: 650 mm, rotational speed (max.): 25 rpm, overall weight: 9,800 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 700 h, coolant supply: 30 bar, spindle motor power: 23,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, The machine was used as a bridging machine because the customer ordered an MT EVO UDS80. This is already his second one. UDS65-5A 5-axis universal machining center with Rotary table with Heidenhain TNC640 - 12,000 rpm hybrid bearing direct drive, water-cooled - Torque 120 Nm (25% ED) - Drive power 23 kW (25% ED) - Separate spindle cooling for constant temperature - Tool holder DIN SK40 with blow-out function Rotary table: - Ø 650 mm - Direct measuring systems in C and A axes General: Hedpfxjzwkwlo Alwsu - 48-position tool changer with dual-arm gripper - Travel ranges X/Y/Z: 620/520/460 mm - Coolant and compressed air gun - Chip conveyor as a scraper conveyor - Coolant system - Electronic handwheel - Work area light IKZ, 30 bar, including paper band filter Heidenhain TS460 for SK40, Workpiece probing system with radio and infrared transmission Heidenhain TT460, tool probing system with radio and infrared transmission for tool measurement Heidenhain KinematicsOpt #48 Machine cover that can be opened, mechanically operated Incl. a large number of – approx. 100 – SK40 holders.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, CNC machining center Kunzmann WF 650 Control system: Heidenhain iTNC 640 Year of manufacture: 2015 Internal machine number: 67 Travel ranges: X-axis 650 mm Y-axis 500 mm Z-axis 450 mm Rotary table C-axis: Ø 400 mm Tilting range A-axis: +120/-95° Rotational range C-axis: 360° Tool holder: SK 40 DIN69871 Tool magazine: 40 positions Spindle speed: 1 – 12,000 rpm Spindle tilting range: +5 / -92° - Coolant system - Internal coolant Hsdpfx Aezwmbgelwou - Electronic handwheel HR 510 FS - Chip conveyor

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A 63 swivellable NC: ° table surface area 1.000 x 600 mm table diameter Ø 600 mm T-slots 1x 14 x H7, 8x 14 H12 max. table load 500 kg rotatable C: 360 ° number of toolpositions 2x12 (24) pos. tool taper HSK-A 63 Hedpfx Aljyz Dcfeweu max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm total power requirement 45 kVA weight of the machine ca. 6,8 t dimensions of the machine ca. 4,5 x 4,5 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - Swivel-Millinghead - Package for tropical climate

Condition: used, Year of construction: 2019, functionality: fully functional, Control System (Standard) - HEIDENHAIN TNC-640 HSCI control unit with software option 1&2 (see control system options), DCM collision protection function - 5-axis simultaneous operation - Block processing time 0.5 sec. Hjdpfjzwxicox Alweu - NC memory capacity 21 GB on SSDR memory card - USB interface - Ethernet network interface - 1024-block look-ahead function - 3D tool length compensation function - DCM (Dynamic Collision Monitoring) - TSC (Spindle Thermo-Compensation) - Tool center point control (TCPC) - smarT.NC (alternative operating mode for dialog and plain text programming in a mix, particularly suitable for beginners) Linear axes: - Travel ranges X/Y/Z: 600/600/500 mm Linear roller guides: - Manufacturer: INA - Size: 45x45 mm Linear axis accuracy: - Manufacturer: HEIDENHAIN length measuring systems - Resolution linear glass scale: 0.0001 mm - Positioning accuracy X/Y/Z axis: 0.005 mm - Repeatability X/Y/Z axis: ±0.0025 mm Rotary axis accuracy: - High-precision angle encoder for A- and C-axis - A-axis positioning accuracy: ± 30" - C-axis positioning accuracy: ± 5" Ball screw (oil-lubricated): - Manufacturer: INA - Pitch: 12 mm - Max. speed X/Y/Z axis: 36,000 mm/min Swivel and rotary axis: - Swivel axis (A): - Swivel range: +120° / -120° - Drive: Worm gear (optional: direct drive) - Brake: hydraulic (1,200 Nm / 50 bar) - Speed: 16.6 min-1 - Rotary axis (C): - Rotation angle: 360° (0.001° increments) - Drive: Direct drive (torque motor) - Brake: hydraulic (2,900 Nm / 50 bar) - Speed: 90 min-1 Swivel and rotary table: - Table diameter: Ø500 x 420 mm - Max. table load: 600 kg - Max. load height: 430 mm - T-slots (number / size / slot spacing): 7 x 14 mm x 75 mm Spindle: - Manufacturer: ROYAL Precision Tools Corporation - Drive type: direct - Spindle motor / SIEMENS motor 1PH8133 - Power S1/S6 (40%): 25/35 kW - Max. torque S1/S6 (40%): 134/261 Nm - Max. speed 15,000 min-1 - Spindle taper: DIN SK-40 / MAS BBT-40 (Option: HSK-A63) - Spindle oil cooler Coolant management: - External coolant supply around the spindle nose - Internal coolant supply through the spindle 20 bar with cartridge filter 40 µm, pumps adapted in the coolant tank - Number of magazine positions: 30 (optional: chain with 32, 48, or 60) - Magazine type: Carousel / Fixed position, coded - with tool change arm (double gripper) - Max. tool length: 300 mm - Max. tool diameter: Ø78 mm - Max. tool diameter: Ø120 mm with locked neighboring positions - Max. tool weight: 7 kg Chip management: - Hinged band chip conveyor Other standard equipment features: - Automatic central lubrication - High-pressure chip flushing / chip shower - Coolant gun - Control cabinet air conditioning - Coolant flushing gun - Work area lighting - 3-color warning light (cycle active / completed / alarm message) - Hand tool kit, leveling bolts, nuts, shims - EMC and safety modules for CE compliance - Portable, electronic handwheel - CE compliant with European directives - Hydraulic and pneumatic supply prepared through the table (3x 80 bar hydraulic and 1x 6 bar pneumatic connection). - Oil skimmer

Condition: ready for operation (used), Year of construction: 1999, operating hours: 12,295 h, spindle speed (max.): 7,000 rpm, travel distance X-axis: 630 mm, controller manufacturer: HEIDENHAIN, controller model: TNC 415, number of axes: 3, This 3-axis HERMLE U 630 T was manufactured in 1999. It features a Heidenhain TNC 415 control system, ensuring precision and reliability in operation. The machine is in very good condition and fully operational. If you are looking to get high-quality milling capabilities, consider the HERMLE U 630 T universal milling machine we have for sale. Contact us for further details. • Machine Type: Universal Milling Machine Hsdpfx Ajzbu I Dolweu • Condition: Very good / Fully operational • Control System: Heidenhain TNC 415

Condition: good (used), Year of construction: 2011, Ref. -No.: 10489 Manufacturer: DMG Type: DMC 60 U duoBLOCK Year of construction: 2011 Type of control: CNC-Steuerung Control: SIEMENS SINUMERIK 840D Storage location: Halberstadt Country of origin: Germany Machine-No.: 11XX000XX01XX Major overhaul: 2025 X-Travel: 600 mm Y-Travel: 700 mm Z-Travel: 600 mm B-Axis: -30 - 180 ° C-Axis: 0,00 ° Spindle Taper: HSK A63 DIN 69893 Max. Workpiece Weight: 600 kg Max. rotary table diameter: 630 O Table speed range: 40 min/-1 Tool Piece Magazine With: 60 Pcs./pcs. Turning Speed Range - Stepless: 20 - 18.000 RPM Max. Torque: 121 / 82 Nm Feed force (X / Y / Z): 10 kN Rapid Travel X/Y/Z: 60.000 mm / min Drive Capacity - Spindle Motor: 28 / 19 kW acceleration: 6 m/s² Total Power Requirement: 55 kW Weight Of The Machine Ca.: 12 t Dimensions Of The Machine Ca.: 7,0 x 5,0 x 3,2 m Numbers Of Pallets: 2 Size Of Pallet: 630 x 630 mm Tool change time: 3,7 s Further information: DMG DMC 60 U – 5-Axis Universal Machining Center (Year 2011) The machine is currently still in production and has been used exclusively for aluminum machining in single-shift operation. It is equipped with a pallet changer and a high-pressure cooling system (30 bar). In 2024, extensive maintenance and refurbishment work was carried out: ✅ All axes (except the Z-axis) were renewed ✅ Guideways were replaced ✅ Spindle was overhauled Maintenance and service reports, as well as all relevant documentation, are fully available. More technical Specifications: 🔹 Working ranges: Distance spindle center – table (horizontal): 20 – 620 mm Distance spindle center – table (vertical): 120 – 720 mm Distance spindle nose – table (horizontal): -150 – 550 mm Distance spindle nose – table (vertical): -250 – 450 mm Features & Accessories ✅ Complete documentation available ✅ Chip conveyor for efficient chip removal ✅ Cooling system with high-pressure cooling (30 bar) ✅ Internal coolant supply for optimal machining ✅ Pallet changer for uninterrupted operation ✅ Rotating sight glass for clear process visibility ✅ Renishaw OMP 60 probe for precise workpiece measurement ✅ Electronic handwheel for easy manual control ✅ Oil mist extraction for a clean working environment Hsdpfx Alsycpxgowou ✅ Paper band filter for effective coolant filtration ✅ Spindle oil cooler for temperature stabilization The machine can be inspected and tested under production conditions by appointment. 📍 Availability: Upon agreement

Condition: repair required (used), Year of construction: 2009, 5-axis CNC machining center – universal – Manufacturer: RÖDERS Machine model: RXP 800 DS Year of manufacture: 2009 Hjdpfxszt Rd De Alwou TECHNICAL DATA Travels - X-axis (mm): 475 - Y-axis (mm): 600 - Z-axis (mm): 400 - A-axis (swivel table): +/- 95 - C-axis (rotary table): 360 EQUIPMENT FEATURES + RC 4 automation + Chip conveyor

Condition: excellent (used), Year of construction: 2019, 5-axis machining center POS POSMILL H 800 U Control: Heidenhain iTNC 530 Year of manufacture: 2019 Internal machine number: 40 ATTENTION: Machine has ONLY 500 spindle hours!!! Travel distances: X-axis: 670 mm Y-axis: 830 mm Z-axis: 600 mm A +120° to -120°, C 360° Table load: 1,200 kg Tool holder: HSK-63A Tool magazine: 96 positions Spindle speed: 18,000 rpm Equipment Rotary swivel table Rotating viewing window Glass scales in all axes Handheld control unit Heidenhain measuring probe Laser for tool breakage detection Rotary through-spindle in the table Air connection in the table incl. M-function Coolant system Internal cooling Chip conveyor Automatic roof Extraction system Documentation General data Repeatability/positioning accuracy upon new delivery 0.004 mm/0.008 mm (VDI/DGQ 3441) incl. tool holders with tools on the tool changer, (No suggestions), oil mist extraction IKZ (Internal Coolant System) Chip conveyor Rated power 90 kVA Hjdpfxeyk Az De Alwou Full load current 125 A Max. current load 200 A 400 V 50 Hz

Condition: used, Year of construction: 2023, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 6LUD00308, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik 840D, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, An Era Ends: Our Last Siemens 840D on the LU 620 With the introduction of the new Siemens SINUMERIK ONE, the proven 840D control system is now available in combination with our LU 620 just once. Demonstration Machine at Used Machine Price Equipment of the Axon LU 620 - Siemens 840D – 5-Axis Simultaneous - Heidenhain glass scales on all 5 axes - Kinematic Optimizer - 15,000 rpm Direct Drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar through-spindle coolant (IKZ) - Air through spindle - Media supply through the center of the table - Automatic workpiece measurement Renishaw OMP 40 - Blum NT A-3 Split laser tool breakage detection - Paper band filter system - Spindle ring flush system - Automatic side door - 60-tool magazine – SK40 - Scraper belt chip conveyor - Chip rinsing system Hodpozdf Hvefx Alwsu - Extraction unit

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 12,000 rpm, total height: 3,295 mm, total width: 3,200 mm, overall weight: 12,500 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 765 mm, travel distance Z-axis: 520 mm, controller manufacturer: FANUC, controller model: 31i-5, product length (max.): 3,537 mm, tool weight: 8,000 g, number of slots in tool magazine: 40, number of axes: 5, This 5-axis DOOSAN VC 630/5Ax was manufactured in 2013. It features an impressive X-axis travel of 650 mm, Y-axis travel of 765 mm, and Z-axis travel of 520 mm. The machine includes a maximum workpiece weight capacity of 500 kg and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN VC 630/5Ax universal machining centre we have for sale. Contact us for further details. • Travels: A (tilt) +30° to -120°; C (rotation) 360° • Spindle nose to table: Standard 160–680 mm; with APC 210–730 mm • Spindle center to column guideway: 220 mm • Rapid traverse: X/Y/Z 40/40/36 m/min; A/C 20/30 rpm Hsdpezt Rwqofx Alwsu • Cutting feed: X/Y/Z 18,000 mm/min; A/C 7,200 deg/min • Table: Ø630 mm (standard); APC pallet 500 x 500 mm • Max workpiece: 500 kg; dimensions standard Ø730 x 500 mm; with APC Ø730 x 450 mm • Min table indexing: 0.001° • Spindle: Built-in; 12,000 rpm; ISO #40 7/24 BIG-PLUS (optional HSK-A63) • Max spindle torque: 204 N·m • Spindle motor power: FANUC 22/18.5 kW • ATC: MAS403 BT40 (options CAT40/DIN40); 40 tools (options 60/81/101/121); max tool Ø adj 80 mm, without adj 125 mm; max tool length 300 mm; fixed address; tool-to-tool 1.0 s; chip-to-chip 8.5 s

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 6LUD-321, travel distance X-axis: 620 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, nominal power (apparent): 45 kVA, torque: 180 Nm, controller manufacturer: Siemens, controller model: Sinumerik ONE, workpiece height (max.): 430 mm, workpiece diameter (max.): 580 mm, workpiece weight (max.): 300 kg, total height: 3,300 mm, total length: 3,225 mm, total width: 2,256 mm, table load: 300 kg, rotary table diameter: 500 mm, overall weight: 8,500 kg, spindle speed (min.): 5 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 40 h, coolant supply: 42 bar, distance table center to spindle nose: 150 mm, spindle motor power: 3,400 W, number of spindles: 1, number of slots in tool magazine: 60, tool length: 250 mm, tool diameter: 127 mm, tool weight: 7,000 g, coolant supply through spindle: 42 bar, swivel angle B-axis (min.): -50 °, swivel angle B-axis (max.): 110 °, swivel angle C-axis (max.): 360 °, number of axes: 5, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Demonstration machine Axon LU 620 features: - Siemens Sinumerik ONE - 5-axis simultaneous machining Hodpfx Alozdddgowou - Heidenhain glass scales in all 5 axes - Kinematic Optimizer - 15,000 rpm direct drive spindle with 34 kW and max. 180 Nm (25% duty cycle) - Production Package I with 42 bar internal coolant system - Air supply through the spindle - Media supply through the center of the table - Automatic workpiece measurement system Renishaw OMP 40 - Laser tool breakage detection system Blum NT A-3 Split - Paper band filter system - Ring flushing system on the spindle - Automatic side door - 60 magazine positions - SK40 - Drag chain chip conveyor - Chip flushing - Dust extraction system

Condition: good (used), Year of construction: 2012, functionality: fully functional, Hedelius RS 605 K 20, Year of manufacture: 2012, Heidenhain iTNC 530 control unit, Travel range right work area: 420/385/520 mm, Travel range left work area: 1330/650/520 mm, 2-axis NC rotary-swivel table 520 x 420 mm / right, Fixed table 1400 x 600 mm / left, Spindle speed up to 12,000 rpm, Water-cooled milling spindle, Hedpozm Sfcjfx Alwou Water-cooled A + C axis / rotary table, Tool shank: SK 40, 30-position tool changer, Coolant pressure: 25 bar, Filter system: 500 liters, Partition for pendulum machining, Chip conveyor.