Gastro Serwis

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2501001, Drill Bit Grinding Machine 0313 – Simple Drill Bit Sharpening for Everyone Achieve perfect results quickly and easily, even without professional training! It’s so easy! Sharpening your drill bit is completed in three steps: 1. Clamp the drill bit in the fixture 2. Grind the drill bit 3. Point/sharpen the drill bit tip Ready in less than a minute! Before clamping the drill bit, use the rotary knob on the grinding machine to set the required drill diameter. With the appropriate collet, the drill bit is positioned against the stop in the left holder of the machine and clamped in place. Hedpfxoxnzrne Aabefn Sharpening the cutting edges and pointing the tip is straightforward: power on the machine, insert the fixture with the drill into the right holder, and turn gently from stop to stop – the first cutting edge is done. Then, rotate the fixture 180° to grind the second cutting edge. Pointing the tip works the same way, using the top holder. That’s it – simply switch off the machine and unclamp the drill bit. A brilliant design combines an eccentric mechanism with a specially engineered grinding wheel, so there’s no need to worry about edge profile or clearance angle. Additionally, both cutting edges are produced with exactly the same setting, guaranteeing perfect edge symmetry. The tip angle can also be freely selected between 90° and 140° before grinding. 21 highly precise collets for diameters from 3 to 13 mm in 0.5 mm increments ensure truly concentric clamping. The service life of the grinding wheel exceeds 5,000 applications. Besides the standard CBN grinding wheel for HSS tools, we also offer a diamond grinding wheel for carbide drills. Changing the wheel takes just a few moments and two safety switches prevent unintended start-up when the machine is open. The compact design and practical carrying handle make this drill bit grinding machine ideal for mobile use. All system tools, such as collets, fixtures or hex wrenches, are stored on the machine itself—so everything you need is always at hand. The drill bit grinding machines are energy efficient and even fit on any desk. Drill bit sharpening without prior knowledge – clean, fast and reliable! Included: - 11 collets for whole millimeter sizes (3 – 13 mm) - 10 collets for half-millimeter sizes (3.5 – 12.5 mm) - Standard CBN grinding wheel - Machine dimensions: 290 x 200 x 180 mm - Shipping weight: 12 kg

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 51 54 3, Spiral drill grinding machines - Year of manufacture: 2006 - Fully functional, ready for demonstration - Grinding range: 3 – 21 mm - Conical surface grinding - Cross-point grinding Hfsdpjxnl Ndjfx Aaben - Point angle: 118° - 150°, steplessly adjustable - Speed: 2850 rpm - Weight approx. 25 kg - With additional dust extractor

Condition: used, Year of construction: 1977, functionality: fully functional, machine/vehicle number: 2062-50-5, overall weight: 600 kg, disc diameter: 200 mm, - Year of manufacture: 1978 - Fully operational, powered on, ready for demonstration - Drill diameter: 3 - 50 mm - Point angle: 50 - 180 degrees - Grinding wheel diameter: 200 mm - Machine no.: 2062-50-5 Hsdpsxnifpjfx Aabofn - Weight: 600 kg - Year of manufacture: 1977

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Hfsdsxablxjpfx Aabjn Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: used, drill diameter 3.0 - 40.0 mm turning speeds 2800 U/min lip angle 40 - 180 ° grinding wheel size 200 x 30 x 40 mm face stroke 80.0 mm longitudinal stroke 70.0 mm voltage 380 V Hfodpfsxabidjx Aaben total power requirement 1.18 kW weight of the machine ca. 225 kg. range L-W-H 750 x 1200 x 500 mm Description: The 1/BM grinding machine is capable of grinding standard twist drills, diamond and avyac drills with any drilling angle, taps, end mills, step drills, reamers, and countersinks, and of producing step drills. It also allows the regrinding of most workshop tools. Furthermore, thanks to its ease of use, no specialized personnel are required. The 1/BM machines all consist of a cross-shaped head housing the grinding unit and a swivel head with a tool spindle, as well as a flag-like device for core- pointing the drills. The swivel head is equipped with a six-position chuck, which, together with the positioning plate, ensures easy and precise clamping of the tool to be ground. It can be rotated to produce drills with any drilling angle. Furthermore, its cam mechanism allows for machining tools with up to twelve cutting edges (six with the included cams). Includes coolant system.

Condition: excellent (used), Description to follow! Hfedpfxew U U Iks Aabon

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 19D7117208, grinding wheel diameter: 180 mm, overall weight: 350 kg, spindle speed (max.): 2,850 rpm, grinding diameter: 32 mm, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! Loading can take place on 08.09.2025 or 09.09.2025! TECHNICAL DETAILS Grinding range Working range: 2.5 – 32 mm diameter Grinding wheel diameter: max. approx. 180 mm Spindle speed: 2850 rpm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 630 x 600 x 1300 mm Weight: 350 kg Hfsdpfxew Hrt Ne Aabon EQUIPMENT Technical documentation

Condition: ready for operation (used), Year of construction: 1981, drill diameter 50 mm total power requirement 2,2 kW weight of the machine ca. 0,6 t Hfsdpfx Aswu Hkljabjn

Condition: used, Drill grinding machine Make: Wedevag, Type WL 2 Technical Data Manufacturer: Wedevag, Sweden Type: WL 2 Grinding range: 2.5 – 20 mm Point angle: 60 – 180 ° Grinding wheel diameter: 203 x 10 x 32 mm Speed: 2800 rpm Connected load: approx. 1.25 kW (400 V / 50 Hz) Dimensions: approx. W 520 x D 900 x H 1,250 mm Weight: approx. 94 kg Hedpfowtqnlox Aabefn Equipment - 4 chucks - Work lamp - Dressing device - 1 grinding wheel mount All information without guarantee. A live demonstration is possible at any time in our exhibition hall.

Condition: good (used), Twist Drill Grinding Machine DAREX SP 2500 -Grinding diameter 1.5-16mm -3x Tool holders -1x Spare grinding wheel -Machine base -Documentation Hodpfx Aaowqzy Tsbjfn Dimensions: LxWxH 0.5x0.5x1.6 meters / Weight 80Kg Errors / input mistakes excepted

Condition: used, Year of construction: 1982, drill diameter 3-40 mm drilling length 500 mm lip angle 15 - 75 ° total power requirement 4,1 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1,80x1,60x1,40 m Hfsdpfewntzwex Aaben

Condition: used, Year of construction: 2008, Suitable for fully automatic, precise grinding and re-pointing of carbide and HSS twist drills, both left- and right-cutting, in a single setup. Accessories: Touchscreen, GMC system (material removal-related controlled grinding speed), Hedpswnpcqofx Aabjfn Automatic brushing process for edge rounding, Base cabinet with drawers, Chuck, Extraction device, Machine lamp, Used CBN grinding wheel, 1 chuck with approximately 30 collets. Workpiece diameter: from 3.0 - 16.0 mm point angle: 90° - 150° (increasing by 1°) Relief grinding: 2° - 18° (increasing by 1°) workpiece length max.: 220 mm Data storage space: up to 30 specific geometries Grinding motor speed: 2850 rpm Dimensions W x D x H approx.: 660 x 560 x 305 mm Weight: approx. 52 kg Grinding wheel diameter: 115 mm connected load: 4 A (230 V / 50 Hz) colour: Grey Drill types 2-flute twist drills made of HSS and solid carbide, tip geometries conical and surface grinding: Pointing variants sharp-edged or with radius

Condition: used, Year of construction: 1986, total width: 200 mm, total length: 1,400 mm, total height: 2,100 mm, Empty weight: 1.500 kg - Year: 1986 - Documentation available: No - Travel X: 30mm - Grinding diameter: 300mm - Table length: 420mm - Max. spindle speed: 2850rpm - Table width: 10mm - Min. spindle speed: 2800rpm - Tool holder: 18 - Transport dimensions: 1400mm x 200mm x 2100mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Hfedpfjwnipkjx Aabsn

Condition: used, Technical details: Hfodpfowi Ni Hox Aabsn drill diameter: 5,,,,40 mm drilling length: 600 mm lip angle: 90-150 ° total power requirement: 4,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: 2-2-2 m CNC programmable according to ISO Point angle 90-140 degrees, disc stroke x 80mm y 80mm grinding wheel 6mm to 150mm ceramic or CBN speed 2500 to 6000 rpm Grinding options - 3 facets 6 surface grinding (Renault patent) - conical surface grinding with cross-section correction / point thinning / cross point. / Type 2/1 Avyac grind / 4 faces gr. Cross for deep drill .... *

Condition: good (used), Year of construction: 1983, Stock number: 2965-3 Manufacturer: WEDEVAG Year of manufacture: 1983 Machine number: 000115/83 Type / Model: WL 2 Grinding wheels: 203 x 10 x 32 mm Point angle: 60 to 180° Diameter: 2.5 to 20 mm Speed: 2,800 rpm Dirty air requirement: approx. 5 bar Hodpfev U Agksx Aabofn Equipment: Base cabinet with extraction system Extraction system: SKF Tools Type: ADT 12 Floor area: 500 x 600 mm Table height: 500 mm Accessories/equipment: Condition: Good Complete weight: 170 kg Dimensions: 500 x 600 x 1,400 mm

Condition: ready for operation (used), Year of construction: 2001, Darex AP 5000+AP5100 Twist drill sharpener for sale together! The two machines come with a pair of clamps! Sharpening range 2-16 mm! Hfsdpfx Aasv N D Sksbjn Easy to use, fast work! Automatic rotation! Easy cross-edge cutting! Smaller clamp 2-6.4 Larger: 6.5-16 Easily position the twist drill with a pneumatic system!

Condition: used, Year of construction: 1997, functionality: fully functional, Data Sheet – Meteor MM 10-US Description: Grinding center for small tools and micro-tools. Model: Meteor MM 10-US Applications: Sharpening of right-handed and left-handed precision tools Sharpening of drill bits (diameter 0.2 - 12 mm) Production of various engraving tools Sharpening of boring tools, single- and multi-flute cutters and radius cutters Technical specifications: Sharpening range: 1-12 mm for tools with collet; 0.3-10 mm for drills with chuck and collets Grinding spindle: axially adjustable Side stops: with fine adjustment AC motor: 120 W Electrodynamic braking system Integrated electronic board Dustproof control panel Machine lighting: 24 V halogen lamp Grinding wheel: Carborundum K 250 Grinding wheel dressing device Dust protection cover Additional specifications: Hsdevyzfvspfx Aabofn Colour: Green-grey Power supply: 230 V / 50 Hz Safety compliance: CE / STR standards tested

Condition: good (used), max drill diameter 32 mm Hfjdpfsvxru Sex Aabon

Condition: new, grinding range 3 -28 mm angle adjustable from - to horizontal 0-180 Grad angle adjustable from - to vertikal 0-45 Grad angle adjustable from - to negativ 0-52 Grad clamping range 3 - 28mm mm 0 5200 U/min connected load 230 / 250 Volt / Watt wheel diameter 100 x 50 x 20 mm weight of the machine ca. 45 Kg dimensions 0,5 x 0,4 x 0,4 m This grinder is ideal for regrinding tools such as end mills, drills, TIG welding needles and much more. Hedjvn U Adjpfx Aabjfn comes standard with: Lathe tool accessories Drill accessories Accessories for milling 5C spring collet (4-6-8-10-12 mm) Clutch key 38-42 Grinding wheel wrench Allen key M3-M8 screwdriver Diamond grinding disc Ø 100 x 50 x 20 Grinding wheel: Ø 100 x 50 x 20 Diamond pen Spring collet: 3/16" - 5/16" - 3/8" - 1/2"

Condition: good (used), Year of construction: 1992, functionality: fully functional, working range: 50 mm, Drill grinder capacity 50 mm Hfedpfx Asviuzcjaben

Condition: used, Year of construction: 2007, turning speeds 2800 U/min drill diameter 2 - 40 mm drilling length 200 mm lip angle 40 - 180 ° Hfodpfx Aaevdxz Ajbon total power requirement 0,76 kW weight of the machine ca. 170 kg dimensions of the machine ca. 850 x 850 x 1200 mm

Condition: good (used), I sell centering grinder strodkowa, in bdb condition. Hfodpfx Aevbwvmsabsn

Condition: used, Year of construction: 1979, Technical details: grinding diameter min/max: Aufnahme: Ø 200 x 32 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,6 m The grinding spindle is equipped with two hand levers: Working range left = hand grinding device for small shank drills, grinding wheel currently Ø 120 x 30mm; admission=Ø 32mm; speed 3000 rpm.; with grinding support Working range right = swiveling device for conical shank drill; cup grinding wheel currently Ø 160 x 30mm; admission=Ø 32mm; speed 3000 rpm. Hodpfx Aju Ng Ncsabjfn Cutting angle max 180° for double-edged and 120° for triple-edged Clearance angle 5° - 9°; drill-Ø 8 - 40mm, possible grinding modes e.g.: normal grinding, DK-grinding, center grinding, spiral grinding, step drill grinding Machine illumination available *

Condition: used, Year of construction: 1984, Technical details: grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Hsdpfju Ng Irex Aabefn Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm Hfedpeu Ng Hnsfx Aaben workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! *