Used Opti Dg 20 for sale (97,557)

Condition: new, Stylus grinding machine Make: OPTigrind Model: GH 20 T Art.Nr.: 3100125 Condition: new machine Speed: 5.000 rpm Clamping range: 1-12 mm equipped as standard with: -Collets 385E, size 4 / 6 / 8 / 10 / 12 mm -Corundum pot wheel -Diamond Cup wheel Chjdpsc I Tzvofx Ab Sec -Device for the Regrinding of chisel -Device for the sharpening of cutters -Apparatus for the grinding of twist drills -Manual

Condition: new, drill diameter 2.0 - 20.0 mm lip angle 90 - 135 ° Codsxablxspfx Ab Sohc turning speeds 4800 U/min voltage 230 Volt engine output 0.12 kW weight 8.6 kg range L-W-H 285 x 130 x 170 mm The handy DG 20 M drill grinding machine is ideal for grinding twist drills made of HSS, cobalt and hard metal. Thanks to the adjustable tip angle of 90° to 135°, this model can be used universally for 2-edged twist drills. Properties: - For grinding HSS and hard metal twist drills from 2 - 20 mm - ER 20 and ER 25 collets also enable clamping of intermediate sizes - Optimum grinding result thanks to the specially guided collet - Includes device for sharpening the drill tip - Universally adjustable tip angle from 90° - 135° - Fast and easy grinding process Scope of delivery: - CBN grinding wheel - ER 20 collets, 3 - 12 mm * 11 pieces (3 / 4 / 5 / 6 / 7 / 8 / 9 / 10 / 11 /12 / 13 mm) - ER 25 collets, 14 - 20 mm * 7 pieces (14 / 15 / 16 / 17 / 18 / 19 / 20 mm) - Collet holder ER 20 or ER 25

Condition: used, machine/vehicle number: 008232, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Max feed speed: 8 m/min Maximum panel thickness: 40 mm Operating Units: 5 nr Cjdpfx Abjxf Dtpe Sshc

Condition: used, machine/vehicle number: 008228, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Max feed speed: 8 m/min Chjdpfxexfhvzj Ab Ssc Maximum panel thickness: 40 mm Operating Units: 4 nr

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Cjdsv Dvhyepfx Ab Sjhc Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 6-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2025, New machine. Please ask for current price and delivery time. Dimensions and weights: Length (product): approx.1750mm Width/depth (product): approx.1075mm Height (product): approx.1420mm Weight (net): approx.550kg Width/depth max. (product): approx.1415mm Max. height (product): approx.2000mm Electrical data: Power drive motor: 2.2kW Supply voltage: 400V Mains frequency: 50Hz Motor power coolant pump: 0.05kW Machine data: Saw blade speed(s): 36 / 72m/min Saw blade length: 2925mm Saw blade width: 27mm Saw blade thickness: 0.9mm Cutting angle: -45 - +60° Feed: infinitely adjustable Lifting of the saw bow: manual Csderah R Tspfx Ab Sehc Cutting ranges: Cutting range 0° round (solid material): 270mm Cutting range 0° square (solid material): 230mm Cutting range 0° rectangular horizontal (solid material): 230 x 350mm Cutting range -45° round (solid material): 230mm Cutting range -45° square (solid material): 170mm Cutting range -45° rectangular horizontal (solid material): 140 x 200mm Cutting range +45° round (solid material): 230mm Cutting range +45° square (solid material): 200mm Cutting range +45° rectangular horizontal (solid material): 210 x 220mm Cutting range +60° round (solid material): 140mm Cutting range +60° square (solid material):140mm Cutting range +60° rectangular horizontal (solid material): 140 x 220mm

Year of construction: 2009, condition: like new (used), Glue tank Guillotine Chsdpoidrd Dsfx Ab Sjc Cutting the front / back of the ball Milling up / down cutters R2 Material feed 11 m / min European CE certificate

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Technical specifications will follow The machine was operated in Germany and has been regularly maintained (last maintenance carried out by Homag in 11/2024) The return transport device visible in the pictures is not included in the scope of delivery! Availability: short notice Codpfjwx Aaqjx Ab Sshc Storage location: Lithuania

Condition: ready for operation (used), Year of construction: 2001, Controller Chedpfowxz H Nex Ab Ssc Model Homatic NC 21 This HOMAG Optimat KL 78/A20/S2/Z was manufactured in 2001. A robust single-sided edge bander, it features a comprehensive setup including joint milling, a glue premelter, pressure zone, snipping, and flush trimming units. It also boasts advanced contour and groove trimming, profile and surface scrapers, and a buffing unit, all controlled by the Homatic NC 21 unit. Contact us for more information about this machine. Application Types Edge Banding

Condition: excellent (used), Year of construction: 2014, I sell the fully equipped edge banding machine BRANDT Optimat KDF 220 C, year 2014: Configuration: Entry fence manual adjustable Premilling manual adjustable Edge banding EVA glue / PUR glue possible Material pressure zone manual adjustable End cutting saws pneumatic adjustable Tilting radius milling top + bottom manual adjustable Corner rounding 1-motor manual adjustable Radius R2 scrapers pneumatic adjustable ( set of R1 included) Control panel Csdpfxeu N T Ewj Ab Sohc Working thickness adjustment servo driven Material height 8-50mm Edge thickness 0,4-3mm Feeding speed 10m/min. Total length including feeding plate 4150mm Total weight 1320kg Plus one additional glue tank included. Very good condition, fully working! Including full documentation and CE. Available immediately.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Sawcapacity at 90 degree: Round: Ø320 mm Rectangular: 450 x 320 mm Square: 320 x 320 mm Sawcapacity at 45 degree: Round: Ø320 mm Rectangular: 330 x 320 mm Square: 320 x 320 mm Sawcapacity at 30 degree: Round: Ø320 mm Rectangular: 410 x 320 mm Square: 320 x 320 mm Sawcapacity at -30 degree: Round: Ø320 mm Rectangular: 420 x 320 mm Square: 320 x 320 mm Sawcapacity at -45 degree: Round: Ø320 mm Rectangular: 340 x 320 mm Square: 320 x 320 mm Sawcapacity at -60 degree: Round: Ø240 mm Rectangular: 230 x 220 mm Square: 220 x 220 mm Chedpjxlaglofx Ab Soc Sawspeed: 20 - 100 mtr.min. Bandsaw: 4.160 x 34 x 1,1mm Working height: 860 mm Motor power: 2,2 kW Machine weight: 1100 kg Machine LxWxH: 223 x 115 x 215 cm

Condition: new, capacity 90 degrees: round 680 mm capacity 90 degrees: square 640 mm 1250x600 mm Chodofg E Hnspfx Ab Ssc capacity 45 degrees: round 680 mm capacity 45 degrees: square 600 mm capacity 45 degrees: flat 870x600 mm capacity 60 degrees: round 580/550 mm capacity 60 degrees: square 530/450 mm capacity 60 degrees: flat 550x450 mm saw band length 8140 x 54 x 1,6 mm band speed 15 - 90 m/min table height 855 mm total power requirement 7,5 kW weight of the machine ca. 5,3 t dimensions of the machine ca. 5,75 x 4,2 x 2,75 m 2-column double miter band saw for quick cutting with pusher system P15. Option P30 Hydraulic saw frame lowering • NC controlled • Automatic angular positioning from + 60° to – 60° High quality automatic miter adjustment Special development for cutting profiles and beams. The highest positioning accuracy is achieved via the new “B&S positioning system”. reached. An intelligent NC control ensures smooth interaction of linear encoder and self-braking positioning motor in conjunction with a reliable hydraulic brake using large radial center positioning. The work table is supported by high-quality preloaded bearings, which ensure very smooth rotation. CNC Control A CNC control allows the programming of up to 90 cutting programs with different section lengths, quantities and mitres. Positioning system gripping on both sides The B&S pusher system, feeding and positioning system, is marked “on both sides “Opening gripping tongs” which are hydraulically controlled. This ensures safe gripping and transport of materials and Bundles that deviate slightly from the ideal shape. The pusher system is separate constructed and ground using ball-bearing linear guides Rack and guided by a frequency-driven, robust geared motor.

Condition: new, Year of construction: 2024, CNC plasma/gas cutting machine PCO-3020-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 2020 x 3100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 3650 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 1550.0 kg - Maximum load: 2800.0 kg - Adjustable support legs: 6 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems GCS – Gas Cutting System – An integrated oxy-fuel system that can cut sheets up to 150mm thick. THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access Cedpfxoh E Izbj Ab Sohc

Year of construction: 2008, condition: used, Dimensions (L/W/H) 13,25 x 5.50 x 8.40 m 0 max. 333 m³/min Chodpfxjw Rf T Ae Ab Sec max. 350 °C total power requirement ca. 324 kW Exhaust air: - Volume flow during cooling: max. 333 m³ / min Hood - Air outlet temperature: max. 350°C with fan run typ. 80°C Cooling water: - Inlet: p = 4 - 5 bar, 15°C

Condition: excellent (used), Year of construction: 2018, operating hours: 400 h, functionality: fully functional, machine/vehicle number: ERGONOMIC 320.250 DG, saw band length: 2,910 mm, saw band width: 1 mm, total height: 27 mm, overall weight: 345 kg, table width: 900 mm, table length: 1,650 mm, working height: 1,250 mm, net weight: 345 kg, Slightly used bandsaw, fully functional. Available for testing by appointment. Codpfx Aew T U Afjb Sehc

Condition: used, Year of construction: 2011, functionality: fully functional, Quick steam generator set - Jumag consisting of 3 quick steam generators including water softening system and chemical dosing system 1x Jumag DG 360 Cedpfx Aown H Aueb Sehc Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year: 2011 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year: 2002

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 17,592 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: standard, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, total length: 5,900 mm, engine type: Volvo TAD761VE - NEU, drive type: Diesel, construction width: 3,050 mm, net weight: 32,700 kg, Diesel forklift Load center: 1200 Fork width: 200 mm Fork thickness: 110 mm Mast type: Standard Gearbox: NEW Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Air Front tires size: 12.00-20 Rear tires Type: Air Rear tires Size: 12.00-20 Chodpfx Aju Dzq Rjb Sec Description: In addition to this Konecranes model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this SMV20-1200B P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, heating, full cab, air conditioning, NEW ENGINE AND GEARBOX

Condition: used, mileage: 5,81,018 km, power: 180 kW (244.73 HP), first registration: 02/2008, fuel type: gas, number of seats: 37, gearing type: automatic, emission class: euro5, color: white, brakes: retarder, Equipment: ABS, parking heater, Engine: MAN Natural gas Euro standard: EEV Gearbox: 4-speed automatic Seats: 34+1+2 emergency seats HF Standing room: 56 Safety Retarder * ABS, ASR, * Fog lights Passenger compartment Auxiliary heating * Driver's microphone Codpfxjrmlfms Ab Sehc * Stroller parking space * Wheelchair ramp * Wheelchair space * Stopping request Exterior Matrix LAWO * 2 x double-width door * Lifting/lowering system * Power steering * Tachograph with card * Sun visor * Electric exterior mirrors * Roof hatches/fans/roof ventilators Other equipment Vehicle dimensions: length 11.98m, width 2.50m, height 3.37m * German vehicle registration document * Twin tires * Tires: VA approx. 40%, HA approx. 40% * Our internal vehicle number: 9466 Errors excepted. Pictures and text may differ from the vehicle. Constantly over 300 vehicles on offer.

Condition: used, Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 50 mm Chodpofbg N Hsfx Ab Ssc -Piston diameter: 20 mm -Piston rod: Ø 8 mm -Price: per piece -Number: 2 pieces -Dimension: Ø 27/188 mm -Weight: 0.3 kg/piece

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm Chodpfx Aeilg Hdeb Ssc - coolant device - Operating instructions

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-6020-DG The machine was engineered and manufactured in Poland. Chodpfx Ajh E Izfsb Ssc Working parameters: - XY operating range (working area): 2020 x 6100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 6750 mm - Width: 2780 mm - Height: 1500 mm - Total mass: 2700.0 kg - Maximum load: 7000.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 150/225 rpm -Power: 0.12/0.2 kW -Brake: 24 V -Construction: B5 -Shaft diameter: Ø 15 mm Codpfx Abob A R Azs Sehc -Protection class: IP 44 -Weight: 10 kg

Condition: new, Year of construction: 2024, CNC plasma cutting machine PCO-2010-DG The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100 mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 900.0 kg - Maximum load: 1120.0 kg - Adjustable support legs: 10 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC – Torch Height Controller – An integrated cutting height control system that automatically adjusts the distance between the torch and the material based on the analysis of variations in the source voltage. Csdsthi Amjpfx Ab Sjhc AMS – Align Material System – Automatically corrects the angle data input of the material in relation to the table. View and challenge the machine Join us for a unique demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the machine will perform against your needs. You can provide technical drawings and sample material. Optional extra - Otinus Academy This is a constantly growing e-learning platform created for Otinus brand's Clients. By purchasing this machine you will gain a one year access to online courses that will allow you to effortlessly train a new employee or refresh the knowledge from training! Optional extra - on-site installation and operational training - 1 day, (up to 8 hours) - installation of the machine and training on using the controller. Consultation with a specialist Optional extra - consultation with a specilist - Telephone: 7.30 a.m. to 9 p.m. CET (Mon-Sat) - package of 8 hours to be used within 12 months. - Online: from 7.30 a.m. to 2.30 p.m. CET (Mon-Fri) - package of 8 hours to be used within 12 months. Optional extra - access to Otinus Academy courses - MyPlasm - 12 month access - LibreCad - 12 month access

Condition: used, Fan heater, mobile heater, gas heater, gas fan -Power: adjustable from 50 to 100 kW -Length: 560 -Width: 350 mm Chedpfeb A Shxsx Ab Sjc -Height: 500 mm -Gas type: propane -Number: 1x available -Price: per piece -Weight: 16 kg

Condition: used, Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm Chedpfx Ajttnt Ijb Ssc -Weight: 9.5 kg