Center Trade Sp. z o.o.

Condition: excellent (used), Year of construction: 2017, operating hours: 12,450 h, machine/vehicle number: 1231, Lefort shear baler 330 Cuts steel and bales material Drgxxr very good condition ,remote control included

Condition: used, Year of construction: 2003, 1 JOHANN LEIMBACH trigger Drgmqp Year of manufacture: 2003 Condition: used

Condition: like new (used), Year of construction: 2023, operating hours: 90 h, The scrap shear is being sold due to a lack of approval. The scrap shear has only been in operation for 90 hours, and that was only during its initial launch. The shirt shear is being sold because the approval is taking a long time. 1 almost new LEFORT hydraulic scrap shear, type KONKEST 600 Standard machine, equipped with a diesel engine (275 HP) Radio remote control Modem 1 set of blades Automatic lubrication system for the box and shear supports Hydraulic oil heater Cutting force: 600 T Cover force: 240 T each Feed force: 180 T Down clamp force: 120 T Press box: 6000 x 800 x 600 mm An extended warranty is available as an option. This has already been clarified with the manufacturer. The machine was delivered on December 7, 2022, but was commissioned in 2023. B9Qibgq7Be You are welcome to inspect the machine and see it in operation.

Condition: refurbished (used), Year of construction: 2007, operating hours: 4,251 h, Functionality: fully functional, machine/vehicle number: 643, Nice machine and good condition, ready to work! Drdf9R

Condition: ready for operation (used), Year of construction: 2008, operating hours: 23,200 h, Functionality: fully functional, machine/vehicle number: MH 3729, cutting force: 800 t, power: 300 kW (407.89 HP), net weight: 1,20,000 kg, Very fast and high-throughput machine TECHNICAL DETAILS Cutting force: 800 t / 7,740 kN Cutting width: 950 mm Cutting height: 650 mm Rammer force: 90 t Number of shear strokes: 4 - 5 1/min Throughput for mixed scrap: 15 - 30 t/h Drc9Xr Filling bed length: 7,100 mm Filling bed width: 2,400 mm Width of the closed filling bed: 880 mm Height of the closed filling bed: 600 mm Side cylinders per cover: 3 pieces Maximum cover force (per cover): 300 t / 3,000 kN Feed force: 160 t / 1,600 kN Oil tank: 6,000 l Maximum working pressure: 360 bar Control: PLC Main motors: 4 x 75 kW Motor for pilot pump: 1 x 4 kW Motors for cooling circuit: 1 x 5.5 kW Motors for cooling fan drive: 2 x 1.1 kW MACHINE DETAILS Overall length: 18,500 mm Overall width: 3,300 mm Dimensions of cabin: 1.5 x 1.5 m Weight: approx. 118 t EQUIPMENT - Hold-down device - Central lubrication system - Radio control & operation from control panel possible - Control panel, mounted in cabin, containing: Emergency stop piping button Selector switch for manual or automatic operation Control elements for manual operation Control elements for automatic operation

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: N 556, cutting force: 250 t, Lefort Ecosystem Drcx8F Diesel drive Cutting force: 250 t. Year of manufacture: 2002

Condition: used, Year of construction: 2005, operating hours: 8,000 h, Functionality: fully functional, cutting force: 630 t, power: 120 kW (163.15 HP), Shear head: Shearing force 630 tons. Side force 2 x 140 tons Clam force 150 tons pusher Drboqr LOADING BOX LENGTH 6 m CUTTING WIDTH 900mm MOTORIZATION Engine: Electro Engine power: 120 kW Year of construction: 2005 Operating hours: 8000 hours remote control: yes

Condition: refurbished (used), Year of construction: 2006, operating hours: 16,000 h, cutting force: 500 t, power: 330 kW (448.67 HP), crushing system Crushing system force: 120 t Power of lids 2 x 240 tons Power of supply 120 tons pusher Open box dimensions: 5000x2400 Closed box dimensions; 800x600 weight; 48 t MOTORIZATION Engine: Scania Type: diesel Engine power: 330 KW Year of construction: 2009 operating hours 16000 h SCISSORS Maximum cutting force; 500 tons Remote control: yes, Drbonn

Condition: good (used), Year of construction: 2001, operating hours: 12,000 h, Functionality: fully functional, cutting force: 400 t, crushing system Crushing system force: 120 t Bqzswbkrdm Power of supply 120 tons pusher Open box dimensions: 5000x2400 mm Closed box dimensions; 5000x800x600mm STATIONARY MACHINE weight; 48 t MOTORIZATION Engine: Scania Type: diesel Year of construction: 2001 operating hours 12000 h SCISSORS Maximum cutting force; 400 tons

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, Functionality: fully functional, cutting force: 600 t, For sale is a scrap press in mint condition with only 100 hours of operation. Dq3Pgd Diesel engine and 6 m bed. The machine is available immediately and can be inspected.

Condition: repair required (used), Year of construction: 2007, Functionality: limited functionality, cutting force: 950 t, Necessary repair: 1x pump needs to be replaced TECHNICAL DETAILS Qbfu9Cx0G Diesel engine: Deutz

Condition: excellent (used), It is a scrap shear in very good used condition. Dqrf27 The machine is available immediately.

Condition: refurbished (used), Year of construction: 2006, operating hours: 100 h, Functionality: fully functional, cutting force: 550 t, power: 169.16 kW (229.99 HP), Sierra 550 T 550 SL Pre-compression 100 t 230 hp Cummins 6-cylinder turbodiesel Shearing capacity - 7 cuts per minute with empty cutterbar 4 cuts per minute with 24-inch cuts Shearing capacity - 12-16 tons per hour Bale size - 32" x 24" x variable Bale weight - average 900 pounds Dqngal Bale output - 10-13 tons per hour Package size - 32" x 24" x variable

Condition: good (used), Year of construction: 2001, operating hours: 10,000 h, machine/vehicle number: 833/01, It is a scrap shear, make 2001 SCS. Dqjt8B Machine is immediately available ex location (Munich) and can be inspected at any time during the run. Please contact me if you are interested.

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 586, MODEL C/A4 SCIVOLO 70 YEAR OF MANUFACTURE - 2006 CHASSIS NUMBER - 586 ENGINE TYPE - DIESEL Bvmgmyov

Condition: like new (used), Year of construction: 2022, operating hours: 1,673 h, Functionality: fully functional, total width: 2,590 mm, total length: 5,580 mm, Sales description: For sale is a ZDAS CNS400K impact shear as good as new, built in 2022, with only 1673 operating hours. The machine is in excellent condition and offers a maximum nominal force of 4000 kN. Bo2Sqs0P Technical data: - Dimensions: 2590 x 5580 x 2705 mm - Weight: 25,000 kg - Maximum stroke of the blade carriages: 800 mm - Operating speed: 80 mm/s - Operating voltage: 24V, with a power consumption of 96 KVA - Hydraulic system: Operating pressure 108 l/min, operating temperature 10-60°C Price subject to negotiation - please send us your offer! Please do not hesitate to contact us if you have any questions or would like to arrange a viewing.

Condition: excellent (used), Year of construction: 2023, operating hours: 800 h, Functionality: fully functional, cutting force: 630 t, power: 90 kW (122.37 HP), net weight: 36,500 kg, total width: 2,400 mm, total length: 9,500 mm, overall weight: 40,000 kg, cutting length (max.): 1,600 mm, year of last overhaul: 2024, type of input current: three-phase, operating pressure: 220 bar, Scrap shear MS-6300e (scrap shear with electric motor) without operating materials. A 250kW diesel generator can be offered separately. Model: MS-6300e Cutting force: 630t Cutting length: 1600mm Discharge height: 500mm Power: 110 KW Capacity: 12-17 t/h Machine weight: 40 tons (+ diesel generator 4 tons) Hopper size: 3850mm x 2600mm x 1500mm Information: A scrap shear is used for economical scrap cutting: U09Wf7Zyuf - simple automatic operation - Energy-saving - Cost-saving - No foundation required Function: Scrap is fed into the loading area with the aid of an excavator. Due to the horizontal filling area and the scrap's own weight, it falls down into the loading chamber and into the cutting area. The scrap is compacted at the front wall and cut by the horizontally moving tool pick-up side via the blades on the front wall. While the tool carrier carriage moves horizontally, the processed material is pushed out via the blades on the front wall of the container. When returning to the rear position, the loaded scrap moves into the interior of the shears under its own weight. The scrap shears are available in different versions depending on customer requirements and the output size can be selected (for new orders). Inspection and trial operation are possible.

Condition: good (used), Year of construction: 2004, operating hours: 23,700 h, Functionality: fully functional, cutting force: 960 t, power: 4 kW (5.44 HP), net weight: 275 kg, Good condition Used Leimbach HS960 high capacity side compression scrap shear. Gpfzec We are the UK Leimbach agents and have serivced, maintained this machine since its purchase from us. Available ex site immidiately. Can be seen running. Contact us with price requests or dismantling and installation costs.

Condition: used, Year of construction: 1996, Functionality: fully functional, cutting force: 900 t, net weight: 2,90,000 kg, Used Leimbach HS900 heavy duty scrap shear currently undergoing a full refurbishment at our factory UK. Approximately 4 months delivery to perform full refurbishment. Contact us to discuss this machine further. 900T cutting force 375T hold down force 300T lid force 600T side compression force 200T pusher force 6.6m x 2.3m charging box C93Gqiq 4 x 90kW + 1 x 22kW electric motors Weight - 290T

Condition: refurbished (used), Year of construction: 2024, Functionality: fully functional, cutting force: 700 t, power: 300 kW (407.89 HP), net weight: 1,15,000 kg, total width: 3,000 mm, total length: 17,000 mm, total height: 4,000 mm, overall weight: 91,000 kg, cutting length (max.): 7,100 mm, year of last overhaul: 2024, pressure: 360 bar, Taurus K773.L1E Cutting force 700 tons Cutting width 950 mm ( blade 1000 mm ) Cutting height 650 mm Box 7100 mm rammer 900 kN Central lubrication system Included 300 kW drive power Revision 2024 (year of construction 2006) Revision includes the following work: - Replacing the HARDOX carriage guides C93Exku - Replacing the carbon guides on the blade carriage - Installation of new knife seats top/bottom - Installation of new blades and screws top/bottom - Welding on the worn parts in the scissor mouth - Dismantling of both covers, fitting new hinges, fitting new shafts, reassembly - Overhaul of all 4 HPR 160D pumps at LINDE Poland - Sealing the valves on the left/right valve bank - Installation of new piston rod feed (180 x 8.29 m) - Installation of new feed guide bushes incl. sealing package - Overlay welding of feed block and hold-down device, followed by milling to size - Inspection of side cylinders, in some cases installation of new seal packs, if required - Replacing piston rods and honing pipes - General repair work on hydraulic pipes, clamps, in some cases - Replacement of damaged hoses - General repair work on structure, covers and platform construction - Repainting of the system - Steel frame for mounting the machine Ready for immediate use. Available from December 2024 with repainting

Condition: good (used), Year of construction: 2011, operating hours: 10,091 h, Functionality: fully functional, Processing capacity 20t/hour Bpjjt7W3I8

Condition: new, Year of construction: 2024, Functionality: fully functional, cutting force: 630 t, power: 110 kW (149.56 HP), total width: 2,400 mm, total length: 9,400 mm, total height: 3,800 mm, overall weight: 50,000 kg, cutting length (max.): 1,600 mm, type of input current: three-phase, Scrap Shear MS-6300mex (mobile version, with electrical motor) Diesel Generator 250KW is optional Modell: MS-63000e Cutting Power: 630t Blade length: 1600mm Output size: 500mm Power: 110 KW Capacity: 8-15 t/h Machine Weight: 39 t (+ Dieselgenerator 4t) Hooper size: 3900mm x 2400mm Information: Container Shear is used for economical scrap processing/ easy automatic operation/ energy saving/ cost saving/ no foundation needed. It can cut any kinds of scrap material. Different models for your choice. Drcvmmanh Machine is not suggested to cut high-carbon steel; axles; wire rope; pig iron; spring steel plate; rail; alloy steel; hub and so on... (these are not good for blades) Function: Scrap is filled into the hopper by means of a grab loader. Due to the horizontal movement of the holder and the scrap’s dead weight, it falls to the bottom of the loading chamber and into the cutting space. After having been compressed on the front wall, the scrap is cut by the horizontally-moving tool-holding side via the blades on the front wall. While the tool-holding slide is moving horizontally, the processed material is pushed out via the blades on the container’s front wall. While returning to the rear position, the loaded scrap moves under its own weight into the shears’ interior. The scrap shear machines are available with different design, depending on the customer requirements. The output size can be choose (only for new order).

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, cutting force: 500 t, power: 110 kW (149.56 HP), net weight: 60 kg, total length: 15,000 mm, cutting length (max.): 1,200 mm, year of last overhaul: 2020, Hydraulic scrap shear Taurus SM540 Cutting force: 500 t Drive: 2x 55 kW Machine ex location South-Germany Fzdm8Co Dismantling and loading: On request by personnel IUT Beyeler AG Year of construction: 1998 Availability: end of february 2024December 2023 Machine can be visited in operation near DE - 66111 Saarbrücken Price including dismantlin and loading on trucks ( all expenses at our side )

Condition: used, Year of construction: 1995, Functionality: limited functionality, cutting force: 800 t, net weight: 1,90,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Ccmbdrxtop Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters connection value of the machine: 220kw If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: new, Year of construction: 2025, - Cutting Force : 1600 Tons - Capacity : up tp 70 tons per hour - Side Compression Force : 2 x 220 Tons - Clemp Compression Force : 250 Tons - Electric Motor : 480 kW - Machine Weight : 150.000 kg - PLC Controlled Xwla3Cq - Remote Control Avaliable - Output Length Adjustable