1A Maschinen GmbH

Condition: good (used), Year of construction: 1987, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality Dcslhcdjz Izacow Nsn - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Condition: good (used), Year of construction: 2001, functionality: fully functional, overall weight: 13,000 kg, Equipment: documentation/manual, Hydraulic press brake Manufacturer: EHT, Type: ECOPRESS 175t x 3050mm Year of manufacture: 2001 Dcolhcdjz Iy U Ejw Nsn Technical data Manufacturer: EHT Type: ECOPRESS 175-30 Year of manufacture: 2001 Working length: 3050 mm Capacity: 175 t Distance between uprights: 2550 mm Upright overhang: 400 mm Ram stroke: 240 mm Distance between table and ram: min. 370 mm / max. 610 mm Drive power of the main motor: 15 kW Dimensions: approx. L 5000 x W 2400 x H 2950 mm Weight: 13 t Equipment • CYBELEC – DNC 1200 2D graphic control • Pneumatic die shifting • Controlled axes: Y1, Y2, X, R • 4 back gauges, pneumatically clamping • CNC-controlled WILA crowning system • Pneumatic upper tool clamping • Adjustable support arms • Operating manual Tool package: Upper tool, bent, 3050 mm, split, H 200 mm Upper tool, slightly bent, 3020 mm, split, H 220 mm Upper tool, straight with clamping edge, 3050 mm, split, H 220 mm Die block 3050 mm, split: V 16, V24, V12, V8, all 30° + clamping groove, H 110 mm Die V50, 2965 mm, split All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 1978, Immediately available, free of insolvency: Hydraulic press brake, Promecan Type RG 35 - 15 Year of manufacture 1978 Pressing force 35 tons Bending length 1500 mm Delhcjz Ixpzedw Njcn Throat depth 200 mm Stroke 100 mm L/W/H 1700/1040/2000 mm Weight 3 tons Tools included Drive power 3.5 kW Price: EUR 2,750.00 plus VAT, ex works

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, pressing force: 160 t, ram plate length: 4,000 mm, Equipment: documentation/manual, safety light barrier, Used Warcom 160-ton, 4-meter CNC press brake. Brand: WARCOM Pressing force: 160 tons Length: 4000 mm CNC control Tool set included in the price. Doloz It R Hjhcdw Njcn

Condition: excellent (used), Technical data: Year of manufacture: 1994, retrofitted in 2026 Working length: 4100 mm Distance between uprights: 3650 mm Press force: 170 tons CNC control: OPERATOR II graphic Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 200 mm Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty. Dolez Immzjhcdw Nocn

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 265 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 104 mm, table length: 4,050 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 530 mm, clearance between the columns: 3,600 mm, oil tank capacity: 250 l, total length: 6,450 mm, total width: 2,650 mm, total height: 2,750 mm, overall weight: 12,500 kg, number of support arms: 2, number of axes: 6, Equipment: CE marking, safety light barrier, 2013 Durma AD-S 40175 CNC Press Brake – 6 Axis – Cybelec ModEva 10S Control Used 2013 Durma AD-S 40175 CNC hydraulic press brake for sale in Ireland. 6-axis CNC press brake with Cybelec ModEva 10S graphic control, Y1, Y2, X, R, Z1 and Z2 axes, CNC motorised crowning, laser guards, tooling and rear safety doors. Manufacturer: Durma Model: AD-S 40175 Axes: 6 Year: 2013 Capacity: 4000mm x 175T Control: Cybelec ModEva 10S Control Includes: Large Selection of Top & Bottom Tooling Description 2013 Durma AD-S 40175 CNC Press Brake, a high-quality 6-axis CNC hydraulic press brake with 4050 mm bending length and 175 tonne bending force. This machine is ideal for precision sheet metal bending, fabrication workshops, engineering companies, subcontract metalwork and production environments requiring a robust, accurate and well-specified press brake. This Durma AD-S 40175 is fitted with a Cybelec ModEva 10S Graphic CNC Control, offering 3D graphical programming and automatic bend sequences. The machine has 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2, giving excellent flexibility for accurate bending and efficient backgauge positioning. The machine is in very good condition and comes complete with a large selection of Euro-style top and bottom press brake tools, laser guards, foot pedal, CNC controlled motorised crowning, quick-release top tool clamps and rear safety doors. Key Features Bending length: 4050 mm Bending force: 175 tonnes Axis configuration: 6 Axis CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Control: Cybelec ModEva 10S Graphic CNC Control Condition: Very good condition Crowning: CNC controlled motorised crowning Tooling: Complete with Euro-style top and bottom tools Safety: Laser guards and rear safety doors Clamping: Quick-release top tool clamps Includes: Foot pedal Suitable for: Sheet metal fabrication, precision bending, general engineering, subcontract fabrication and production bending Technical Specifications Model: AD-S 40175 Bending force: 175 tonnes Bending length: 4050 mm Distance between columns: 3600 mm Y-axis rapid speed: 120 mm/s Y-axis working speed: 10 mm/s Y-axis return speed: 100 mm/s Crowning: Motorised Daylight: 530 mm Table width: 104 mm Table height: 900 mm Stroke: 265 mm Throat depth: 410 mm Support arms: 2 Backgauge finger blocks: 2 X-axis travel speed: 500 mm/s X-axis travel: 650 mm R-axis travel speed: 350 mm/s R-axis travel: 250 mm Motor power: 18.5 kW Oil tank capacity: 250 litres Machine dimensions: 6450x2650x2750 mm Machine weight: 12,500 kg Cybelec ModEva 10S Graphic CNC Control The machine is fitted with a Cybelec ModEva 10S Graphic CNC Control, a user-friendly press brake control designed for graphical programming and efficient bending setup. Control features include: 3D graphical control interface 10.4” colour TFT screen 128 MB RAM 128 DM main memory Easy Cursor operation Automatic bend sequence calculation Single-page part programming capability CAD/CAM sequence viewing support Included Equipment This used Durma AD-S 40175 press brake is supplied with: 6 CNC controlled axes: Y1, Y2, X, R, Z1 and Z2 Dcolhcdsz Imc New Non Cybelec ModEva 10S Graphic CNC Control Large Selection of Euro-style top & bottom tooling CNC controlled motorised crowning Laser safety guards Foot pedal Quick-release top tool clamps Rear safety doors Front support arms Backgauge finger blocks

Condition: used, Year of construction: 1998, machine/vehicle number: H981224, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 170 t, stroke length: 180 mm, operating speed: 8 mm/s, reverse speed: 80 mm/s, table width: 180 mm, table length: 4,230 mm, table height: 960 mm, throat depth: 410 mm, clearance between the columns: 3,760 mm, oil tank capacity: 150 l, total length: 4,500 mm, total width: 2,200 mm, total height: 2,900 mm, overall weight: 13 kg, Equipment: CE marking, documentation/manual, safety light barrier, This machine is still operational and can be inspected at the factory in Northern Germany. Working length: 4100 mm Distance between uprights: 3650 mm Pressing force: 170 tons Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable rear stop Overhang: 300 mm Stroke: 200 mm Delhcdoz Imcpew Nocn Crowning Working height: 960 mm Motor power: 13 kW Dimensions (length x width x height): approx. 4500 x 2200 x 2900 mm Weight: approx. 14 tons Accessories: 1 set of tools

Condition: good (used), Year of construction: 1990, Used plate shear from Haco Djloz Il Hgshcdw Nocn Type TS 3006 Capacity 3100 x 6 mm Adjustable back gauge and cutting angle Manually adjustable shear gap

Condition: good (used), Year of construction: 1995, Used press brake by Baykal Type APH 3106 120 Capacity 3100 x 120 tons NC control Djlhjz Il Epocdw Necn Adjustable back gauge and stroke depth Includes a set of tools

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: M71311, functionality: fully functional, operating hours: 1,500 h, pressing force: 160 t, stroke length: 300 mm, operating speed: 110 mm/s, reverse speed: 10 mm/s, table width: 90 mm, table length: 3,060 mm, table height: 960 mm, distance table to ram: 590 mm, total length: 4,000 mm, total width: 1,600 mm, total height: 2,800 mm, overall weight: 15,000 kg, year of last overhaul: 2026, Equipment: safety light barrier, Servo-electric press brake SAFANDARLEY type E-Brake 160-3100 NS (160T - 3060 mm) Tooling system: WILA Manufacturer: Netherlands - Lochem We are the official representative of SafanDarley in Poland. - Servo-electric drive - Pressing force: 160 T - Bending length: 3060 mm Djlhcdwsz Ibnys Nscn - Stroke: 300 mm - CNC control in Y1 / Y2 / X / R / Z1 / Z2 axes - Back gauge controlled in 4 CNC axes - X / R / Z1 / Z2 - 2D graphic control - EC20 model - Light curtain - programmable - WILA tooling system - Hydraulic punch clamping and hydraulic die clamping - Lower table compensation - "CROWNING" - CNC controlled - Front supports - 2 pcs, 150 kg/pc, length 950 mm

Condition: new, Year of construction: 2026, machine/vehicle number: P790, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, pressing force: 150 t, stroke length: 265 mm, operating speed: 200 mm/s, reverse speed: 150 mm/s, table length: 3,100 mm, throat depth: 305 mm, distance table to ram: 450 mm, clearance between the columns: 2,600 mm, oil tank capacity: 290 l, overall weight: 12,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, The workhorse! A press brake for all applications! The High Quality Press Brake, or HQPB for short, is the top model in the Placke range of press brakes. The entire manufacturing process, from the hydraulic cylinder to the control cabinet assembly, takes place in-house. By using state-of-the-art technology combined with many years of experience in the field of forming technology, the HQPB series enables you to bend at the highest level. Even the standard basic model is a fully functional press brake. This combination of safety, reliability, and efficiency, along with easy operation, allows us to meet the highest demands and precision in the bending process. Press force: 1,500 kN (150 t) Working length: 3,100 mm Distance between uprights: 2,600 mm Installation height: 450 mm Overhang: 305 mm Ram stroke: 265 mm Height of lower ram above the floor: 850 mm Rapid traverse max.: 200 mm/s Pressing traverse max.: 9.8 mm/s Return traverse max.: 150 mm/s Ram positioning accuracy: ± 0.01 mm Ram inclination: ± 10 mm (electrically limited to ± 5 mm) Motor power: 15 kW Hydraulic oil tank capacity: 290 l Operating voltage: 400 V / 3 Ph / 50 Hz Machine weight: approx. 12.5 t Description: > Machine body Steel S 355 N, design based on FEM analysis Dcelsz Hn D Eshcdw Nsn Side uprights with two pressure cylinders, above floor 2-component structural paint, RAL 7004 / 7016 > Hydraulics & Upper Tool Proportional control valve, electronically monitored cylinder synchronization Double upper ram guidance, Heidenhain scales Separate Y1/Y2 control, inclination monitoring > Tooling Top: WILA hydraulic, NSCL-II-HC Bottom: mechanical clamping for dies with pins (13 × 20 mm) 2 aluminum support arms at the front, approx. 600 mm, height-adjustable > Power Crowning Slim Segmented, mechatronic crowning system Compensates for symmetrical deflection Also compensates for deviations due to wear, sheet metal quality and off-center insertion > Back gauge 4-axis X-axis 1,100 mm, 400 mm/s, ± 0.01 mm R-axis 200 mm, 200 mm/s, ± 0.01 mm Z1 + Z2 CNC, 850 mm/s, ± 0.02 mm, finger spacing min. 50 mm > Control Delem DA 66S 24″ touchscreen on a swivel arm 2D programming, 3D visualization DXF import, tandem operation > Safety & Efficiency CE-compliant, Pilz safety PLC TFS laser light curtain, rear light curtain eco-MODE start-stop automatic > Additional equipment LED work area lighting in the rear Remote diagnostics for Delem control and Pilz PLC Automatic side upright compensation

Condition: used, functionality: fully functional, SCHIAVI PRESS BRAKE 3000 X 160 TON CNC MODEL: STP-C-163 Djlhez Hnyyjcdw Nocn MOTORIZED BACK GAUGE USED MACHINE INTERNAL CODE: SVR 445

Condition: good (used), Year of construction: 2003, functionality: fully functional, Key parameters: Manufacturer: TRUMPF Maschinen Austria GmbH & Co.KG Model: TrumaBend V170 Year of manufacture: 2003 Dcoloz Hk Iaehcdw Nen Serial number: E10156 / B0105A0067 Pressing force: 1700 kN (170 tons) Max. bending length (working length): 4,080 mm Throat depth (distance between side frames): 3,680 mm Max. stroke: 365 mm Stand clearance (cut-out): 410 mm Electrical and hydraulic parameters: Supply voltage: 3x400 V Frequency: 50 Hz Rated current: 46.3 A Total power consumption: 32.0 kVA Max. operating pressure: 340 bar Oil capacity: approx. 95 l Diameter of hydraulic cylinder: 190 mm Dimensions and weight of the machine: Total weight: approx. 18,000 kg External dimensions of the machine (W x D x H): approx. 5,000 × 2,210 × 3,100 mm. The machine is offered without tooling.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 2,200 h, pressing force: 135 t, stroke length: 500 mm, table width: 3,000 mm, table height: 500 mm, year of last overhaul: 2025, Equipment: 3rd hydraulic function, CE marking, documentation/manual, safety light barrier, Dener Puma XL press brake, 135 tons, Wila tooling, year 2020. Delhoz Hf Izocdw Necn

Condition: repair required (used), Year of construction: 1993, functionality: not functional, input voltage: 380 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 150 t, table length: 3,550 mm, oil tank capacity: 390 l, For sale is a robust hydraulic EHT bending press, type EHPS 15-35, manufactured in 1993. The machine comes from an industrial setting and, after repair, is ideal for sheet metal processing, metalworking, metal construction, contract manufacturing, or as a production machine for medium to heavy bending operations. The bending press has a working length of 3,550 mm and a pressing force of 1,500 kN, or approximately 150 tons. It is equipped with a Cybelec DNC 880 control system. The scope of delivery includes a comprehensive set of upper and lower tools as well as special tools. Important note regarding the current condition: The machine can be started. However, an error appears during the initialization of the stops, which means that bending cannot currently be performed. The error must be bypassed or professionally repaired. After this error is resolved, the machine should be fully operational again. Therefore, it is being sold explicitly as a used industrial machine in need of repair for restoration purposes. The machine is in used condition, with signs of wear consistent with its age. There are signs of use, paint damage, and dirt, as shown in the pictures. The control cabinet, the control system, the tools, and the machine components are documented in the photos. An on-site inspection is possible and highly recommended, subject to prior arrangement. A functional test is only possible to a limited extent, as there is currently an error during the initialization of the stops. Equipment / Scope of delivery • Hydraulic CNC bending press EHT EHPS 15-35 • Cybelec DNC 880 control system • Existing upper tools / punches • Existing lower tools / dies Dcoljz E U Dpehcdw Nen • Special tools included • Front supports / material supports • Foot switch • Side protection areas / safety guards • Robust EHT industrial design • Large working length of 3,550 mm • Pressing force approx. 150 tons Inspection / Collection The machine is located in an industrial hall and can be inspected by appointment. Disassembly, loading, and transport will be arranged or carried out by the buyer. Assistance with organization can be provided if necessary. Sales note Preferably sold to commercial businesses. No guarantee, no warranty, no returns. Subject to prior sale and errors. All technical specifications have been provided to the best of our knowledge based on the nameplates and available information.

Condition: new, Year of construction: 2026, neu 2026 080248 November 2026, Zwischenve Türkei 92932 € 1756.41 € 175 to 3050 mm Y1 / Y2 / X und R-Achse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 100 mm/s 650 mm 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 18.5 kW 4250 mm 1700 mm 2850 mm 10900 kg 4axes (Y1, Y2,X and R) Color graphics control Delem DA 66 S - 2D graphical touch screen programming mode Dolhjz Ek Ahscdw Necn - 3D machine representation, in simulation and production - 24" high resolution color TFT - Delem Modusys compatibility (module scalability and adaptivity) - USB, peripheral interfacing - User specific application support within the control's multitasking environment - Sensor bending & correction interface - Profile-S2D offline software servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 20 h, pressing force: 30 t, stroke length: 150 mm, oil tank capacity: 90 l, total length: 1,760 mm, total width: 1,380 mm, total height: 2,140 mm, overall weight: 1,700 kg, For sale is a compact, precise, and fully functional hydraulic NC bending press, KNUTH AHK M 1230 NC, manufactured in 2022. The machine has only been used very rarely and is in very good condition. Thanks to its NC control system, it offers the possibility of creating automatic bending programs. Inspection possible by appointment. Dslhoz D Dh Iscdw Nocn

Condition: used, machine/vehicle number: 21'940, functionality: fully functional, pressing force: 175 t, stroke length: 400 mm, throat depth: 300 mm, distance table to ram: 965 mm, overall weight: 23,000 kg, working width: 4,100 mm, TECHNICAL DETAILS Pressing force: 175 t Working width: 4,100 mm Maximum stroke: 400 mm Distance from table to ram: max. 965 mm Dcslhsz Dw S Hjcdw Non MACHINE DETAILS Control model: Cybelec ModEva 12S (retrofitted) Hydraulic oil capacity: approx. 230 l Machine dimensions (L x W x H): approx. 5,400 x 2,420 x 3,200 mm EQUIPMENT Accessories as shown in the pictures.

Condition: used, Year of construction: 2015, gebraucht 2015 080242 prompt, Zwischenverkauf v Türkei 38900 € 1 175 to 3050 mm 4 265 mm 2600 mm 410 mm hydraulisch 120 mm/s 10 mm/s 100 mm/s 18.5 kW 4250 mm 1850 mm 2770 mm 10520 kg 4 axes (Y1, Y2, X, and R-axis) Cybelec DNC 880 S CNC control - 2D graphic display - User-friendly conversational programming - Automatic bending sequence calculation - Automatic calculation of developed length for blank cutting - Product and tool memory - Correction capability - USB ports for backup and program storage CNC-controlled backgauge on linear guide and ball screws Backgauge finger blocks on linear guide CNC-controlled crowning New upper tool 1010/A/75°/0.8/105, sectional and gooseneck New lower tool 2009/85° (V = 16, 22, 35, and 50 mm), sectional Fiessler AKAS laser safety device mounted on the upper beam 2 sheet support arms on linear guides Foot pedal Oil fill Operating manual in German with EC declararation of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call Dcjlsz Dra Sehcdw Nsn • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 175 t, stroke length: 275 mm, operating speed: 12 mm/s, reverse speed: 190 mm/s, table length: 3,100 mm, table height: 900 mm, throat depth: 410 mm, distance table to ram: 550 mm, clearance between the columns: 2,600 mm, oil tank capacity: 300 l, total length: 5,025 mm, total width: 2,150 mm, total height: 2,680 mm, overall weight: 9,086 kg, Equipment: CE marking, documentation/manual, safety light barrier, 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake 2022 Ermaksan Speed-Bend PRO 3100x175 CNC press brake in very good condition. 175T x 3100mm, 6 axis, Delem DA66TX, CNC crowning, laser guards, generous tooling package included. Machine Manufacturer: Ermaksan Model: Speed Bend Pro 3100 x 175T Machine Type: 6 Axis CNC Pressbrake Capacity: 3100 x 175T Year: 2022 Control: Delem DA66TX Condition: Very Good Description Ermaksan Speed-Bend Pro 6 Axis CNC Hydraulic Press Brake with Delem DA66TX Control. Available now, this 2022 Ermaksan Speed-Bend PRO 3100x175 CNC Press Brake is a high-quality, modern hydraulic press brake in very good condition. This is a 6 axis machine with Y1, Y2, X, R, Z1 and Z2 axes, fitted with a Delem DA66TX CNC control, pneumatic top tool clamping, CNC crowning, laser guards, wanderer type foot pedal, and supplied with generous selection of top and bottom tooling. Ideal for sheet metal fabrication, precision bending, stainless steel work, mild steel fabrication, aluminium bending, agricultural fabrication, general engineering and production workshops. Key Features 2022 Ermaksan Speed-Bend PRO 3100x175 175 tonne bending capacity 3100mm bending length 6 axis CNC press brake Y1, Y2, X, R, Z1 & Z2 axes Delem DA66TX CNC control Pneumatic top tool clamping Package of Top and bottom tooling included CNC / motorised crowning Laser safety guards Wanderer type foot pedal Very good condition Excellent machine for fabrication and production bending work Capacity & Main Machine Data Manufacturer: Ermaksan Model: Speed-Bend PRO 3100x175 Year: 2022 Machine Type: CNC hydraulic press brake Bending Length: 3100mm Bending Force: 175 tonnes Distance Between Columns: 2600mm Axes: Y1, Y2, X, R, Z1, Z2 Crowning: Motorised / CNC crowning Backgauge Finger Blocks: 2 Speeds & Axis Travel Y Rapid Speed: 180mm/s Y Working Speed: 12mm/s Y Return Speed: 190mm/s X Axis Travel: 800mm X Axis Speed: 500mm/s R Axis Travel: 250mm R Axis Speed: 350mm/s Z1 / Z2 Axis Travel Speed: 1000mm/s Stroke, Daylight & Frame Stroke: 275mm Daylight: 550mm Throat Depth: 410mm Table Height: 900mm Table Width: 90mm Power, Size & Weight Oil Capacity: 300 litres Motor Power: 15kW Approx. Length: 5025mm Approx. Height: 2680mm Approx. Width: 2150mm Approx. Weight: 9086kg Delem DA66TX CNC Control Dcslhcdwez Dn Huo Nsn Control Features Include 2D graphical touch-screen programming High-resolution colour TFT display Automatic bend sequence calculation Collision detection 3D machine setup with multiple tool stations USB / peripheral interfacing Product and tool memory Profile-TL offline software support User-friendly Delem touch navigation Delem’s DA-66T platform is listed by Delem as a 2D graphical press brake control with automatic bend sequence calculation, collision detection, full 3D machine setup, USB interfacing, 17" high-resolution colour TFT display and Profile-TL offline software support. Included Equipment Pneumatic top tool clamping Lots of Top tooling Lots of Bottom tooling CNC crowning Laser guards Wanderer type foot pedal 6 axis CNC backgauge system Delem DA66TX control Typical Applications Sheet metal fabrication CNC press brake bending Mild steel bending Stainless steel bending Aluminium bending Box and pan type components Architectural metalwork Agricultural fabrication General engineering workshops Production bending work

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical specifications of the DURMA AD-S 30175 press brake: number of axes: 4 (X, Y1, Y2, R) maximum pressing force: 175 t maximum bending length: 3050 mm slide stroke: 265 mm reach: 410 mm approach speed: 140 mm/s bending speed: 10 mm/s return speed: 130 mm/s distance between columns: 2600 mm dwell time: 102 ms dwell distance: 8 mm safety distance: 263.2 mm oil tank volume: 200 l maximum operating pressure: 285 kg/cm2 motor power: 18.5 kW current: 37 A current protection: 50 A control voltage: 24 V power supply: 3 x 400 V; 50 Hz dimensions (L x W x H): 5450 x 2550 x 2750 mm weight of the DURMA AD-SERVO 30175 machine: 10830 kg Equipment of the DURMA press brake: CNC control unit: CYBELEC ModEva 10S manual deflection compensation European-type tool clamping system European-type punches and dies powered back gauge front supports with T-slots and tilting stop Djlsz Diu Tehcdw Nocn

Condition: ready for operation (used), Year of construction: 2009, pressure 170 t chamfer lenght 3170 mm distance between columns 2700 mm column arm 420 mm Dcelhcdszz S D Ijw Nen dayligth 620 mm stroke 350 mm ajustment speed 160 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec oil volume 280 L 0 300 bar controlled axis 7 Anzahl Number of working hours ca. 51.500 h total power requirement 16.5 KW weight of the machine ca. 12700 kg range L-W-H 4550 x 2650 x 3150 mm "LONG STROKE" special version Excellent condition (!!) Original price approx. 200.000 Euro Special price on request ----- "LONG STROKE" electro-hydraulic press brake featuring: * Increased daylight opening (installation height) = 620 mm * Increased cylinder stroke = 350 mm ----- Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control "AMNC" - 7 axes (X1+X2, Y1+Y2, R, Z1+Z2) * Swiveling control unit - front left * Touchscreen control panel * Tool & program library * Incl. handheld control unit for manual axis movement - CNC-controlled backgauge adjustment (X1+X2) * Adjustment range .. 700 mm * Adjustment speed .. 500 mm/sec. - CNC-controlled vertical adjustment of gauge fingers (R-axis) * Adjustment range .. 250 mm * Adjustment speed .. 160 mm/sec. - CNC-controlled left-right adjustment of gauge fingers (Z1+Z2) * Adjustment speed .. 1000 mm/sec. - AMADA manual upper tool clamping system * Type: WILSON TOOLS Express * Vertical tool loading/unloading possible * Incl. 1x set of sectional ROLLERI upper tools * "TOP 175.60.R2" ... H 143.8 + 30 mm / 60 degrees - AMADA lower tool holder * Incl. sectional / reversible 4V die * V-openings: 16/32/35/50 mm - FIESSLER laser safety system (front of machine) * Motorized adjustment * Model series: "AKAS III 150" - Side safety guards (swinging doors) - Rear safety guard (swinging door) - 1x movable dual foot pedal - Front emergency stop button - Original operating manual

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, overall weight: 15,800 kg, Equipment: CE marking, documentation/manual, COLGAR PRESS BRAKE Model: 4000x180T Year: 2003 Axes: 6 + Backgauge table Control: CYBELEC 1200/B Complete documentation Dcelhcdwjzx T D Re Non

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 73.331.611.504, functionality: fully functional, power: 18.5 kW (25.15 HP), pressing force: 175 t, stroke length: 265 mm, throat depth: 450 mm, working width: 3,050 mm, TECHNICAL DETAILS Press force: 175 t Djlhcozxcf Redw Nocn Max. working width: 3,050 mm Frame distance: 2,600 mm Overhang: 450 mm Max. stroke: 265 mm Crowning system: CNC-controlled Number of axes: 3 Axes: Y1, Y2, X Back gauge depth: 1,000 mm Ram holder: Standard Tool holder type: European Style MACHINE DETAILS Drive system: CNC Control system: Durma Power: 18.5 kW Dimensions & Weight Dimensions (L x W x H): 4,250 x 1,950 x 2,700 mm Weight: 10,520 kg Transport packages: 1 EQUIPMENT Tools CE marking

Condition: used, Year of construction: 2016, total length: 4,250 mm, total width: 1,950 mm, total height: 2,700 mm, Colour: Blue Weight: 10.520 kg Price: On request - Year: 2016 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 73331611504 - Drive system: CNC - Control system brand: Durma Dcolhcozwuhzodw Nsn - Power [kW]: 18.5 - Number of axes [pcs]: 3: Y1+Y2+X - Press force [ton]: 175 - Max. working width [mm]: 3050 - Column gap [mm]: 2600 - Throat depth [mm]: 450 - Backgauge depth [mm]: 1000 - Max. stroke [mm]: 265 - Crowning system: Mechanical - Punch holder: Standard - Tool holder type: European-style - Tools included: Yes - Transport dimensions: 4250mm x 1950mm x 2700mm (l x w x h) - Transport weight [kg]: 10520kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum