Nado Industriehandel GmbH & Co.KG

Condition: excellent (used), Oven OMIA SECOMAT V-10 Maxi temperature: 160° Internal dimensions: 1000 x 1000 x 1000 mm Equipped with 1 small trolley Voltage: 380 V Width: 2000 mm Depth: 1500 mm Total height: 2000 mm Hodpfxoxnnbvo Aabefn Weight: approx 1 T MACHINE IN VERY GOOD CONDITION

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: JM325D, HGH start hole EDM machine, fully functional incl. documentation for sale. Hedpoxnba Eefx Aabjfn

Year of construction: 2023, condition: used, Solvent volume: approx. 455 l, heating capacity: approx. 3.3–13.2 kW, compressed air supply: approx. 7–10 bar, max. batch weight: approx. 80 kg, max. throughput: approx. 20 batches/h, control: SIEMENS Simatic HMI Hfedpfx Asxnakpeabsn

Year of construction: 2023, condition: used, max. operating pressure: approx. 6 bar, net weight: approx. 4,100 kg, connected load: 230/400 V, 50 Hz, total power: approx. 12 kW, 1 AUER abrasive supply unit, 1 AUER ASP-2 abrasive extraction and filter unit, year of manufacture: 2023, serial no.: 825955, max. operating pressure: approx. 6 bar, net weight: approx. 400 kg, connected load: 230/400 V, 50 Hz, total power: approx. 3.2 kW, RITTAL One control system, FANUC M-20iB25 loading robot, year of manufacture: 2022, 1 FANUC R-30iB plus robot controller, year of manufacture: 2022, serial no.: E22513963, net weight: approx. 120 kg, connected load: approx. 380-415/440-480 VAC, 7 linear meters of roller conveyor approx. 120x60 cm, 1 protective enclosure Hfsdpsxnai Ssfx Aabjn

Year of construction: 2023, condition: used, Max. workpiece length: approx. 800 mm, Movement axes: X-axis: approx. 20 mm, Y-axis: approx. 250 mm, Z-axis: approx. 1,000 mm, 1 quenching medium/generator water system, consisting of: 1 1,000-litre quenching medium tank, 1 600-litre generator water tank, stainless steel supply lines, 1 coolant filtration system, 1 air filtration unit IFS Vario M 1600, year of manufacture: 2023, serial no.: 568269-2, net weight: approx. 85 kg Hedpfx Aasxnailsbsfn

Year of construction: 2018, condition: used, with mesh safety enclosure, welded mesh fence, 1 sliding door for loading, 14 storage positions made of steel frame (blue), mobile loading trolley, IPSEN loading and unloading system, year of manufacture: 2018, serial number: 30.5185-60, 2 hinged doors, IPSEN hardening furnace DL(M)-5-E, year of manufacture: 2018, serial number: 30.5185-50, min./max. working temperature: 150/450°C, connection values: 49 kVA/38 kW/400 V/50 Hz, IPSEN autoclave "Electromagnetic Field Emission Category 2 (EN12198)", Ø approx. 180x400 cm, type: RUHT-524 (FV)AvaC(N), year of manufacture: 2018, serial number: 30.5185-10, min./max. working temperature: 150/1,320°C, 1 cooling unit KKT cBoxX, no.: 909120-00575, year of manufacture: 2018, water softening unit, pressure vessel MASCHINEN- UND BEHÄLTERBAU MB170512-3.14300L, volume: 14,300 l, year of manufacture: 2018 Hsdpfx Ajxnahzsabsfn

Year of construction: 2021, condition: used, Weight: 5,000 kg, SIEMENS Sinumerik control, filter unit IFS IF-Vario M1600, 2 plate heat exchangers, 1 generator water tank, capacity: 600 L, 1 quenching media tank, capacity: 1,000 L, various pumps and piping, control cabinets, handling robot YASKAWA YR-1-6VXH25-A00, automation system/workpiece storage EGS Automation Eldec Mind-L 1000, year of manufacture: 2023, serial number: 190605-5, dual setup; 1 cooling system RHOSS S.P.A. (648); 1 chiller unit RHOSS S.P.A. WK01102178 Mind L-1000S (662), year of manufacture: 2023, serial number: RH00331342 Hjdpfx Aajxnahusbefn

Year of construction: 2025, condition: used, comprising the following items: Placement unit (594), consisting of: 1 chain conveyor SEB-EURODRIVE, dimensions (W x H x D): approx. 350 x 145 x 60 cm; 1 rail conveyor device TEGEL-TECHNIK (595), carriage dimensions (W x H x D): approx. 130 x 160 x 130 cm, control system SIEMENS SIEMATIK HMI, rail length: approx. 25 m; 1 double hardening furnace PADELTTHERM KEU 1008/400-S (596), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 hardening furnace PADELTTHERM KEU 1008/400-S (597), year of manufacture: 2023, connected load 4 and 3 phase 400V/50Hz, 60 kW, maximum temperature: approx. 400°C; 1 autoclave ALD VACUUM Modultherm (598), year of manufacture: 2022, recorded operating hours: approx. 6,968, max. temperature: approx. 1,250°C, capacity: approx. 4,909 l / 338 l, 1 mobile autoclave unit on rail system, rail length approx. 25 m, ID: 39716; 1 pressure vessel, SABAWERK 47-001310, (599), capacity: approx. 5,000 l, max. allowable pressure: PS-1/40 bar, test pressure: approx. 58 bar, inspection date: 2023, maximum operating temperature approx. 50°C, min. operating temperature: approx. -10°C; 1 pressure vessel SABAWERK 47-001310, max. capacity: approx. 6,000 l, max. allowable pressure: PS-1/9 bar, test pressure: approx. 12.9 bar, inspection date: 2023, serial no.: 20550; 1 gas mixing unit FLUSYS (601), year of manufacture: 2022, comprising: 1 mixing battery FLUSYS type FSP-2030A_01, serial no.: M22111122A, year 2022, 1 compressed air drying unit ESD MK-HP575, year 2022, max. pressure: approx. 45 bar, max. capacity: approx. 575 m³/h; 1 compressed air compressor unit SAUER (602); 1 water treatment plant TECHNOTRANS (603); 1 pressure vessel KOMNINO KPT-10000-40/1.8 (604), year of manufacture: 2023, max. capacity: approx. 10,000 l, max. allowable pressure: approx. 57.2 bar, serial no.: 10054; 1 aluminium platform ladder, 10-steps, FARAONE 300/SN (605), max. load: approx. 150 kg, height: approx. 262 cm, net weight: approx. 35 kg, serial no.: 20230729002; 1 2-door steel cabinet (606), contents: various consumables for the multi-process hardening system. Hfedpfx Aasxnak Aobsn

Condition: used, Type: Struers Labotom-3 with Cooli-1 Cooling System Struers Labotom-3 with Cooli-1 Cooling – Complete Cut-off Saw System Description For sale is a complete Struers cutting system, consisting of: - Struers Labotom-3 cut-off machine (Type 05326146) - Struers Cooli-1 cooling and control unit (Type 05761116) Hfsdpsxmh Tcefx Aabsn Ideal for precise wet cutting of metallic, ceramic, and other materials in laboratories and materials testing. Technical Data – Struers Labotom-3 (05326146) Feature / Value Motor type / Power: Three-phase motor, 3.2 kW (at 50 Hz) / 3.0 kW (at 60 Hz) Speed: approx. 2,845 rpm (50 Hz) / 3,450 rpm (60 Hz) Cutting disc: Ø 250 mm × 1–1.5 mm × 32 mm (bore) Cutting capacity: up to approx. Ø 90 mm (depending on material) Working table: 200 × 215 mm with three 10 mm T-slots Safety features: Lid interlock, automatic shut-off when opened, thermal protection Noise level: approx. 64 dB(A) in idle mode Connection: 3-phase 400 V / 50 Hz Dimensions (W × D × H): approx. 651 × 645 × 410 mm Weight: approx. 80 kg Technical Data – Struers Cooli-1 Cooling & Control Unit (05761116) Feature / Value Function: Control and supply of coolant pump for wet cutting operation Pump capacity (system-dependent): 60–125 L/min at approx. 1 bar Power supply: 1~ 230 V / 50 Hz Dimensions (W × D × H): approx. 226 × 166 × 128 mm Compatibility: specifically designed for Labotom-3, also compatible with Secotom series Important note: "The table shown in the photos is not included in the scope of sale." Scope of delivery - 1 × Struers Labotom-3 cut-off machine (Type 05326146) - 1 × Struers Cooli-1 cooling & control unit (Type 05761116) - Connecting cables & accessories (as shown in the photos) Shipping / Collection Total weight: approx. 85–90 kg Shipping: via freight forwarder on pallet (possible by arrangement) Collection: preferred, by appointment Location: Borken/Westf. Condition: used (Specifications and technical data are subject to change and may contain errors!) For further questions, please feel free to contact us by telephone.

Condition: used, functionality: fully functional, Year of construction: 2002, machine/vehicle number: 022607, Lavatubi La Chatre mod. 50 Hfjdpfxoxmgy Ij Aaben Year 2002 Operational

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 41357/07, For sale: automatic centrifuge Rösler Z 800 HA-Turbo-Floc, designed for cleaning and recycling process fluids (water, emulsions, baths). The machine efficiently separates solid particles and sludge from liquids, thus extending the service life of process media and reducing operating costs. ✅ Capacity up to 800 l/h ✅ Automatic operation ✅ Ideal for electroplating plants, paint shops, and machining operations ✅ Reliable German manufacturer Hjdsxl Hpmjpfx Aabjfn In very good condition.

Condition: good (used), Year of construction: 2018, Videojet 3340 Laser Marking System Videojet ADc Oracle Laser Extraction System and Filter Year 2018 Videojet AD350 AV/D - 03454 Laser Extraction System and Filter Hedpfxoxl Emwj Aabsfn Year: 02/2018 Videojet TU420H User Interface Monitor Windows Embedded Standard Find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), FOBA FD84S Sensor for YAG Laser Marking System For sale is a used FD84S sensor from FOBA. The sensor is designed for use in YAG laser marking systems. Technical Details: Manufacturer: FOBA Model: FD84S / S50 Design: Sensor / Laser Control Component Laser Class (System Use): 4 Wavelength: 1064 nm Laser Power (System Use): 70 W Pulse Power: 10 kW Hfjdjxlq Exjpfx Aabjn Pulse Duration: 70 ns Application: Spare Part / Component for FOBA Laser Marking Systems Condition: Used, Working Buy FOBA FD84S sensors and other items at great prices – Here you can buy products from professionals for professionals – You'll find other attractive offers in our SHOP.

Year of construction: 2019, operating hours: 50 h, condition: used, functionality: limited functionality, heating capacity: 50 kW (67.98 HP), The system is designed for the automatic induction hardening of screws and bolts in sizes M8 and M10. Manufactured by Grimm Zuführtechnik, the system is capable of processing approximately 70-80 parts per minute (depending on the component) and offers various monitoring features (temperatures, component heights, component types, rotation monitoring, etc.). Parts are conveyed from a bunker belt via a steep conveyor to a linear sorter, from where they are precisely positioned and transferred into an 8-position indexing table, with two nests per station. Hfodpfx Aoxlii Asaben A 50kW high-frequency generator from IDEA is connected, featuring additional monitoring functions (energy output, earth fault detection, inductor water flow and temperature monitoring, etc.). The system includes its own quench water tank, from which the parts are discharged using a magnetic conveyor belt. The parts are then demagnetized. Quench medium filtration is handled via a cartridge filter. Both the system and the generator are prepared for connection to a central cooling system. Due to the currently unconnected cooling, the system is only partially operational; however, it can be inspected by interested buyers. The system was built in 2019 and, unfortunately, has never been run continuously due to the impact of the Covid-19 pandemic and associated order cancellations. As a result, it is in like-new condition. Should you require additional photos, we also welcome you to visit and inspect the system on site.

Year of construction: 2013, condition: ready for operation (used), Internal dimensions X/Y/Z: 1350mm/1100mm/1070mm, door dimensions X/Y: 1000mm/1000mm, volume: 50L, test pressure: 15bar, max. operating pressure: 8bar, max. load capacity: 350kg, machine dimensions X/Y/Z: 1500mm/1700mm/2150mm. Documentation available. An on-site inspection is possible. Hjdpfx Aajxhnrzsbjfn

Condition: excellent (used), 1 x leveling device for clamping materialographic specimens in specimen holders. Hedpfx Aoxgp Nreabsfn 1 x Struers specimen holder for clamping 6 specimens, Ø 40 mm, new – original packaging / opened 1 x Struers specimen holder for clamping 6 specimens, Ø 40 mm, used – original packaging / opened 2 x Struers specimen holders for clamping 6 specimens, Ø 30 mm, used 2 x Struers specimen holders for clamping 6 specimens, Ø 50 mm, used

Year of construction: 2000, condition: ready for operation (used), A Plasma Finish low-pressure plasma system for surface treatment of workpieces is available. Chamber volume: approx. 15l, internal chamber dimensions X/Y/Z: 250mm/250mm/250mm, plasma frequency: 2.45GHz, plasma type: microwave, power range: 100W-600W, machine dimensions X/Y/Z: approx. 700mm/900mm/1850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Hfjdexghn Tepfx Aabon

Condition: ready for operation (used), Struers LaboPol-5 Laboforce-3 Grinding and Polishing Machine Laboforce-3: Rotational speed: 250 RPM Applied force range: min. approx. 5 N - max. approx. 40 N LaboPol-5: Disc diameter: 200-230 mm Speed range: 50-500 RPM Hjdpfjxfuhkox Aabjfn You are welcome to arrange an inspection appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Interim sale reserved. Visit our shop to view this and our other offers. All company names and trademarks mentioned are the property of their respective owners and are used only for identification and description of the products. Deviations from technical data as well as errors in the item description may occur and are reserved.

Year of construction: 2011, condition: ready for operation (used), Rübig GN 70/120-DUO Year of manufacture: 2011 The RÜBIG gas nitriding unit is an electrically heated system designed for gas nitriding processes in an atmosphere of pure ammonia or nitrogen mix, as well as for tempering in a pure nitrogen atmosphere at temperatures up to 650°C. The nitriding processes are automatically controlled using defined recipes created via PLC control. Nitrogen is used for purging the system and for cooling after nitriding. Hedpfjxft Ivsx Aabefn

Year of construction: 2025, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - signal light for indication of operating status Hsdsxd A I Aepfx Aabofn - max. component height approx. 300mm - electrically adjustable Z-axis - Integrated PC with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: AC, type of cooling: air, The universal laser marking system LAS 28 XLe from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fiber laser you can mark almost all materials such as steel, carbide, aluminum and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fiber laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realized with just a few clicks without extensive programming knowledge. Serial and article numbers are automatically incremented by the software after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. The standard equipment includes integrated PC with Windows operating system and laser software. Optionally, the laser model LAS 28 XLe can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realized. Made in Germany Fiber laser 30 W, 20 W or 50 W - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - Signal light for displaying operating status - optional: rotary axis (3-jaw chuck) - optional: extraction system (incl. activated carbon filter) Hsdpfsxd Az Nox Aabofn - optional: digital height measuring system - optional: autofocus system - EZCAD marking software in German / English - Pilot laser (simple preview, plain text preview) - Focus finder (simple focus adjustment) - max. component height approx. 300mm - Electrically adjustable Z-axis - Integrated PC with Windows operating system - Height-adjustable screen and keyboard support - Frame made of aluminum profile - Air-cooled - Door width approx. 700mm / door height (pass-through): approx. 400mm - 230V connection - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with screen holder approx. 1500 x 800 x 1900mm (LxWxH) - Weight: approx. 120 kg

Year of construction: 2013, condition: ready for operation (used), An HGH lapping-blasting system is available. Internal dimensions X/Y/Z: 2x590mm/400mm/250mm, max. workpiece weight: 100kg, overall system dimensions X/Y/Z: approx. 1250mm/700mm/1500mm, transport dimensions X/Y/Z: approx. 1600mm/1000mm/1650mm, weight: approx. 120kg. Documentation available. An on-site inspection is possible. Hfsdpfxexd Avts Aabjn

Year of construction: 2020, condition: ready for operation (used), Cabin dimensions X/Y/Z: 3500mm/3500mm/2500mm, door dimensions X/Y: 2800mm/2200mm, small door dimensions X/Y: 1000mm/2000mm, illumination: approx. 750Lux, rotary table diameter range: 1000mm/2500mm, max. workpiece height: 300mm, max. table load (centered): 300kg, horizontal stroke: 2800mm, vertical stroke: 400mm, nozzles: 3. Pressure blasting pot volume: 200l, operating pressure: 8bar, deduster air volume flow 1: 1800m³/h, filter area 1: 17m², deduster air volume flow 2: 3600m³/h, filter area 2: 30m². Overall system dimensions X/Y/Z: approx. 3660mm/3660mm/2650mm, control: Siemens KTP700. Documentation available. An on-site inspection is possible. Hfodpfx Aexdc U Nsabon

Condition: excellent (used), Osai Neomark 400 Nd-YAG laser marking machine Marking system particularly suitable for high production volumes and printed circuit boards with high packing density. The large working area and the resulting elimination of travel movements enable high-resolution and precise marking, saving up to 60% writing time compared to conventional systems. Manufacturer: Osai Type: Marking laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Voltage: 230 V Weight: 1300 kg Laser completely rebuilt Beam expander motor replaced All cooling hoses replaced Hfsdexbck Espfx Aabon You can find more items—new and used—in our shop! International shipping costs on request!

Condition: good (used), functionality: fully functional, machine/vehicle number: 5109 SP, This advanced degreasing system is engineered to deliver efficient and thorough cleaning of metal components. Metal baskets, manually loaded with parts, are guided through heated degreasing baths to ensure consistent and effective results. The installation operates with Cyclohexane (liquid, supplied by BASF) as the degreasing medium, guaranteeing both reliability and high-quality performance. Hodoxawkkopfx Aabjfn Key features include: - Precise Temperature Control: Baths are heated to the required operating temperature for optimal degreasing. - Triple Filtration System: Integrated filtration at 0.1 µm, 1 µm, and 10 µm ensures maximum fluid cleanliness and extended bath life. - Robust Design: Built for durability and consistent performance in industrial environments. - Dutch ATEX-Zone Certified: Fully compliant for safe operation in hazardous areas. This installation offers a proven solution for manufacturers seeking safe, efficient, and high-quality degreasing of metal components. The machine is in full working order and ready for immediate use. Available now and can be tested in Boxtel, Netherlands.