I.P.G. Betriebs- und Industrieversteigerungen GmbH

Condition: used, Year of construction: 1987, pressing area: 2550mm x 1250mm opening: 400mm heating: elektric plate surface: ALU - eloxiert Emergency stop switch: yes pressure: 80t number of cylinder: 4 electricity: 32,2A Fsdpfjyt E Rmjx Adaopd machine length: 3000 mm machine width: 1500mm weight: 4000kg

Condition: excellent (used), Fully functional veneer press by OTT, model JU60. Plates: 225x120 cm. 2x6 kW electric heating. Test run possible at any time. Fpsdpfxsytyk Ij Adajd

Condition: excellent (used), Fully functional veneer press by OTT, model JU2511/70. Plates: 255x110 cm (excellent condition). 2x6.8 kW electric heating. Test run possible at any time. Fpjdpoytykuofx Adaed

Condition: ready for operation (used), shelf length: 2500 mm shelf width: 1200 mm number of pistons: 4 Fjdeytfa Ujpfx Adaepd clearance between shelves: 49 cm cold pressing motor power: 1.1 kW

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, cylinder diameter: 85 mm, working width: 1,400 mm, number of cylinders: 10, working length: 4,000 mm, TECHNICAL DETAILS Max. working length: 4,000 mm Max. working width: 1,400 mm Number of press cylinders: 10 Cylinder diameter: 85 mm MACHINE DETAILS Heating system: Oil EQUIPMENT Fsdpeyqybhofx Adaepd System with pre-feed conveyor belt System with outfeed table Safety standard: CE marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 8212

Condition: ready for operation (used), working length 3300 mm Fpedpfx Adjypcxtjaed working height 1800 mm 3 vertical cylinders 2 horizontal cylinders manual operating mode

Condition: used, total width: 1,300 mm, total length: 2,800 mm, total height: 2,000 mm, overall weight: 3,000 kg, pressing force: 70 t, opening width: 300 mm, cylinder diameter: 70 mm, No. 04524 Veneer press Italpresse MEC 4S Used Gold anodized heating plates in very good condition Plate dimensions 2200 x 1100 mm LW Heating plates electrically heated Pressing process electro-hydraulic Total pressure 70 tons 4 hydraulic cylinders each 70 mm diameter Hydraulic cylinders and pistons are made of a special steel and chrome-plated Opening width 300 mm Emergency stop safety rip cord all around The press table is guided in parallel by means of 2 racks Button control for closing / opening Electromagnetic 2-stage hydraulic pump Transport dimensions approx. 2800 x 1300 x 2000 mm LWH Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Fodpfx Adsyninrjaopd Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press Model BTF 1628/60 Year of manufacture: 1997 Line for laminating smooth and shaped MDF parts with thermoplastic films from roll or sheet, suitable for PVC, PP, high-gloss PVC, ABS films. Suitable for thermoforming and membrane process. Max. part size: 1250 x 2550 mm Part thickness: 6-35 mm Heating plate dimensions: 1600 x 2800 mm Max. heating temperature: 140°C Stroke: 230 mm Fsdpfx Aoymyl Sedaepd Siemens control system Total connected load: 38 kW With 2 aluminium tables and reserve table Weight: 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm With pin table

Condition: used, Technical specifications: Number of pistons: 2 Piston diameter: 80 mm Connection to central heating system Shelf dimensions: 1000x2500 mm Clearance: 440 mm Hydraulic pressure: ~2kg/cm2 Emergency stop switch Fpsdpfx Asymyc Dsdaed Motor power: 2 kW Power supply: 380 V Overall dimensions: Length: 3400 mm Width: 1400 mm Height: 1850 mm

Condition: good (used), Year of construction: 1969, For sale is a veneer press from Ott. The machine is in perfect working condition and can be inspected on site. Sale is on behalf of a customer. Machine location: Friedeburg area. Machine details: Fodpfx Adsymmgioaepd Pressing area: 225 cm x 120 cm Year of manufacture: 1969 Motor power: 12 kW Includes heating Emergency stop cable The machine has been repainted at some point

Condition: used, Year of construction: 1989, pressing area: 2500mm x 1100mm opening: 400mm heating: elektrisch plate surface: ALU - Gold eloxiert Emergency stop switch: yes pressure: 65t Fjdpfx Adeyl Tinjaspd number of cylinder: 4 electricity: 22A machine length: 3500 mm machine width: 1300mm weight: 3000kg

Condition: new, Year of construction: 2025, Plate dimensions 3000x1350 mm Fsdpfxeyk H Stj Adaepd Daylight opening 400 mm Number of daylights 1 St. Heating 31,5 kW Specific pressure 2,5-5,0 kg/cm² Total pressure 90 t Motor output 1,5 kW Dimensions (L/W/H) 3480x1500x2000 mm weight of the machine ca. 5000 kg

Condition: good (used), SIMIPIANTI COLD PRESS WITH MOVABLE UPPER PLATENS LOWER PLATEN: DIMENSIONS 1800x1215mm With rollers in the platen for panel conveying UPPER PLATEN IN 2 SECTIONS: 1800x600mm Fpedpfx Aoyk Hzuedaed OPENING BETWEEN THE 2 PLATENS: 650mm

Condition: excellent (used), Catalogue number 7740 TECHNICAL SPECIFICATIONS - heating plate dimensions: 3000x1350 mm - number of loads: 1 - electrically heated shelf - clearance: 340 mm Fpjdpoyk E Nqsfx Adaed - number of cylinders: 6 - cylinder diameter: 80 mm - total power: 20.7 kW - pump motor: 1.1 kW - dimensions (L/W/H): 3570x1600x2200 mm - weight: approx. 3500 kg ADVANTAGES – made in Germany – electrically heated shelves – unpainted – in impeccable condition – used press Net price: 48,900 PLN Net price: 11,650 EUR at an exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Condition: good (used), Year of construction: 2007, GRIGGIO Model TYP NPC/A 30/19 AF-BO, S/N B3720207. Through-feed press for bonding natural veneer, laminate, etc. Working width: 1830 mm. Max length: 3010 mm. Price includes Osama S4 R/P-2000 glue rollers. Fsdsyk Dnfjpfx Adajpd

Condition: used, Year of construction: 1990, total width: 1,500 mm, total length: 3,150 mm, total height: 2,100 mm, overall weight: 5,000 kg, pressing force: 135 t, opening width: 400 mm, operating pressure: 340 bar, power: 22 kW (29.91 HP), cylinder diameter: 90 mm, transport width: 1,500 mm, space requirement width: 1,500 mm, space requirement length: 3,150 mm, transport height: 2,100 mm, transport length: 3,150 mm, space requirement height: 2,100 mm, pressure: 340 bar, working width: 1,350 mm, empty load weight: 5,000 kg, plate width: 1,350 mm, table width: 1,350 mm, table length: 2,550 mm, No. 04516 Veneer press Ott ST 2513/135 Used, year of construction 1990 Fpsdpfxeykt H Re Adajd Aluminium heating plates with protective foil 2550 x 1350 mm LW Total pressure 135 tons Specific pressure 4.4 - 6.0 kg/cm2 6 hydraulic cylinders with diameter 90 mm Maximum operating pressure 340 bar Heating plates electrically heated 2x emergency stop safety line all around Opening width 400 mm, infinitely adjustable 4 heavy longitudinal beams in the press table ensure enormous stability Pull-out material support on the left front side Button control for close - open - stop Total electrical connection approx. 22 kW Transport dimensions approx. 3150 x 1500 x 2100 mm LWH Weight approx. 5000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: used, Technical data: Number of pistons: 8 Piston diameter: 80 mm Own heating system: 27 kW Temperature up to 120°C Connection to central heating possible Shelf dimensions: 1300x3500 mm Table working height: 1040 mm Clearance: 400 mm Hydraulic pressing force: power/max 160 tons Automatic loading and unloading on roller-belt table (1680x3500 mm) Belt loading speed: 15 m/min Safety switch Pump motor power: 3 kW Loading motors power: 1 kW Total power: 31 kW Power supply: 380V Weight: ~5500 kg Fjdpoykalyofx Adaopd Overall dimensions: Length: 4650 mm Width: 3400 mm (press 1615 mm / table 1680 mm) Height: 2400 mm

Condition: refurbished (used), functionality: fully functional, Refurbished four-cylinder hydraulic flat press of Italian manufacture. Branded multi-layer press for easy wood veneering. Fpodpfxsyi U Rns Adajd Veneering plate dimensions: 2500 x 1300 mm Plate opening: 400 mm Pressure over full surface: 2.5 kg/cm2 Total maximum pressure: 80 tons Number of hydraulic cylinders: 4 MYLAR Teflon foil on the plates Prepared for water heating of the plates Option to install a hot water boiler Price: EUR 7,200 ex VAT The overhaul status and readiness of the machine for collection must be checked in advance! In stock in Telnice near Brno, Czech Republic Testing, machine demonstration, and operator training are included as standard.

Condition: excellent (used), Shelf press for veneering Cooper 3000×1300, water-heated Fpsdoyi Sfcopfx Adaed

Condition: used, OTT 300K100 Shelf Press Fpedpfsyh H Uyex Adaed Shelf length: 255 cm Width: 135 cm Clearance between shelves: 350 mm Shelves are in nice gold color but have a single dent of approximately 3 cm diameter Electric heating Piston diameter: 100 mm, 4 pistons Weight approximately 3.2 t Machine in stock, inspection possible

Condition: excellent (used), Shelf press for veneering Manni 2500×1300 Shelf length: 2500 mm Shelf width: 1300 mm Fpjdpfoyhnvnex Adasd Press with 4 cylinders Shelves heated with water from the central heating system

Condition: excellent (used), Shelf width 136 cm Shelf length 260 cm 18 kW Fpsdjygxbljpfx Adajd

Condition: ready for operation (used), electrically heated Press dimensions 2,200 x 1,100 mm Fpedpfjygg Imex Adasd 4 press cylinders, diameter 80 mm Temperature of upper and lower plate separately adjustable

Condition: used, Platters 300cm/125cm divisible into 3 pieces 380V Fodpfx Aeyf Enijdaepd Cold press

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: -, ORMA NPC/DIGIT 6/95. Press area of 3000x1300 mm, six cylinders.Press opening stroke 650 mm. 3 loads. Pressure 90 ton. 18 kW electro-heater for thermo-oil heating up to 120°C. Parallelism control by sensor. CE-standard. Transport throughout Europe is available at a good price. Fpjdpfoyf Azgsx Adaod