Esa Service Srl

Condition: used, Year of construction: 2015, GENERAL INFORMATION: Manufacturer: ULVAC, Inc., Japan Model: EWA-165 Type: Vacuum Roll Coater (Vacuum Metallizer) Application: Metallization of plastic films (PET/OPP/PE etc.) by aluminum evaporation Useful web width: up to 1650 mm Film thickness range: 12 μm typical. POWER SUPPLY: Bdjdpfx Aox Av Rbeddok Control / Main Units Power supply: 3-phase, 60 Hz, AC 380 V Rated power consumption (cabinet 1): 290 kVA Rated power consumption (cabinet 2): 160 kVA VACUUM SYSTEM: Main Pumps Oil Diffusion Pump (Ejector type): Model: ULVAC PBL-20 Power: 18 kW Fluid charge: 90 L Voltage: 380 V Water cooling requirement: 25 L/min

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, power: 34.3 kW (46.63 HP), input voltage: 460 V, input frequency: 50 Hz, input current: 43 A, type of input current: AC, Performance data & key technical specifications (derived): WHU 2500 nominal throughput approximately 430 m³/h (at 50 Hz) for the WH/WHU 2500 version. Inlet flange DN 250 ISO-K, outlet flange DN 100 ISO-K on WHU 2500. Water cooling of the motor/system. DV650S: Nominal suction capacity 650 m³/h at around 5×10⁻³ mbar ultimate vacuum. Bjdpfxex Aqa Ds Addjdk

Condition: used, Year of construction: 2022, Sterling STC650 DGSA NC Twin Column Semi Automatic Bandsaw, 415V, Hydraulic Top Clamps, Powered Infeed Roller Track 8m, Powered Outfeed Roller Track 18m with NC Measuring System. S/No. 56000097 (2022) Bsdpfxex Ap Sxe Addodk Location: This lot is located in Birmingham, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: excellent (used), functionality: fully functional, Model: TMBBB662005A Pump Model: TMB10662005A Bdsdpfxox Ap I To Addsk Pump Type: ADIXEN ATH2303M Controller Model: 123744 Controller Type: OBCV4 PROF IP54 Firmware: Vi 3.01.00 / Vv 1.08.02 / Vm 3.11 Year of Manufacture: 2018/2019 Operating Hours Pump: approx. 25,000 h

Condition: new, The vacuum pump is available from stock and ready for immediate use. We recommend that installation is carried out only by trained personnel. Adapter materials are available on request. Oil filling: LVO 120 Technical data: Three-phase motor: 1.1 / 1.3 kW 230 / 415 V, 50 Hz 460 V, 60 Hz Ultimate pressure with open gas ballast: 0.5 mbar Bedpfex Anivex Addodk Ultimate pressure with closed gas ballast: 0.05 mbar Subject to prior sale! This offer is valid only for customers within Germany and European countries!

Condition: used, FJ Edwards 6/16/AS Manual Folder, Width 1850mm Bsdpjx Agizefx Addodk Location: These lots are located in Dudley, West Midlands, UK. Unfortunately, there are no loading facilities, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2000, total length: 900 mm, total width: 500 mm, total height: 600 mm, - Year: 2000 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 2147964 - Transport dimensions: 900mm x 500mm x 600mm (l x w x h) - Transport packages [pcs.]: 1 Financial information Bsdpfxjx Afals Addsdk VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: like new (used), Edwards Edwards iXH4545H – Industrial High Vacuum / Dry Pump For sale is an Edwards iXH4545H, version MK1 HV MM96 Black EMS. This unit originates from a technical company environment and is part of Edwards’ high-performance iXH series, which is used globally in industrial high vacuum and coating processes. Technical Data Manufacturer: Edwards Model: iXH4545H Version: MK1 HV MM96 Black EMS Weight: approx. 890 kg Technical Specifications (iXH Series) Dimensions: approx. 1,240 × 860 × 1,310 mm (L × W × H) Pumping speed: up to approx. 4,500 m³/h (depending on gas & configuration) Ultimate pressure: < 1 × 10⁻² mbar Inlet: ISO 100 / ISO 160 Outlet: KF 40 / NW 40 Power supply: 400–480 V, 3-phase Power consumption: typical 12–18 kW Cooling: water-cooled (approx. 6–10 L/min) Description: The Edwards iXH4545H is an industrial high vacuum/dry pump from the 4500 series. Bdjdoxz Dv Nspfx Addsk It is typically used in: • PVD / CVD coating • Semiconductor industry • Process chambers / vacuum furnaces • Research & development • High gas load applications • Chemical/corrosive process gas environments The iXH series is renowned for its high reliability, robust construction, and 24/7 operational capability. Weight: approx. 890 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data and specifications!) For further questions, we are happy to assist you by phone.

Condition: like new (used), Edwards iH1000/20 MK5 HV – Industrial High Vacuum Pump – As New / Unused / 0 Operating Hours – 420 kg For sale is an Edwards iH1000/20 MK5 HV industrial high vacuum system. This unit comes from a corporate environment, has never been installed, features 0 operating hours, and is therefore in nearly new condition. Ideal for buyers in industry, research, or vacuum technology who are looking for a powerful system at an attractive price. Technical data: Manufacturer: Edwards Model: iH1000 / 20 MK5 HV Code no.: A59030946 Design: Industrial dry pump Pumping speed / Suction capacity: approx. 560 cfm (50/60 Hz) Ultimate pressure: up to approx. 2 × 10⁻³ mbar Inlet connection: ISO 100 Outlet: KF 40 (NW 40) Motor power: approx. 5.1 – 6.1 kW (depending on model) Oil volume (service): approx. 1.5 liters Operation type: suitable for harsh industrial processes ('harsh duty') Cooling: water- or air-cooled depending on model Dimensions: Length: approx. 909 mm Width: approx. 839 mm Height: approx. 390 mm Description: The Edwards iH1000/20 MK5 HV is a robust industrial high-vacuum pump designed for demanding applications such as: Bdsdoxz Dqtspfx Addjk - PVD / CVD coating - Semiconductor processes - Laboratory and research facilities - Vacuum furnaces & process chambers - General industrial vacuum technology Weight approx. 420–430 kg Condition: new Scope of delivery: (see picture) (Specifications and technical details subject to change and errors excepted!) If you have any further questions, we will be happy to answer them by phone.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, PFEIFFER VACUUM "DUO 250" 250 m3/h 7.5 kW Used - fresh from the revision Pfeiffer VACCUM DUO 250 Condition: smoked replacement device Manufacturer: Pfeiffer VACUUM Type: DUO 250 Technical data: - 3 phases. - 7.5 kW power. - 960 rpm - Voltage 230/400V - Volume 250 m3/h - Weight 360kg Technical information without guarantee Bsdpfjxzzfnsx Addsdk For details, please refer to the type plate - see picture There are other vacuum pumps, vacuum systems, Edwards Booster EH1200 Roots piston vacuum pump for sale

Condition: ready for operation (used), Year of construction: 2022, Technical Data: Product Number MM 1102 B V03 Bdsdpsxzvwlsfx Addsk Year of Manufacture 2022 Motor Power 4 kW Capacity 135 m3/h Maximum Vacuum 60 mbar Noise Level 74 dB Rotational Speed 1500 rpm Weight 200 kg Dimensions [H x L x W] 1011 x 581 x 410 mm The pump achieves a vacuum of 60 mbar, as confirmed by the sensor measurement in the video attached below. Warehouse storage, pump used only a few times for testing purposes. The pump is in perfect condition. New oil New oil filter Oil-lubricated vacuum pump, suction pump – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are categorized based on their operating principle into: displacement, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: the ultimate pressure (the lowest pressure achievable by the pump), pumping speed and its dependency on pressure, capacity (usually measured in m3 of gas pumped per unit time).

Condition: used, Year of construction: 2012, Gardner Denver Compair Compressor Type L90-7 5A. S/No. CD10008276001 (01/2012) Bdsdpjxzfuyjfx Addsk Location: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.

Condition: used, Year of construction: 2012, Gardner Denver Compair Compressor Type L55 -10A. S/No. CD10008370001 (01/2012) Country of Origin: Germany Location: This lot is located in Bradford, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described. Bdodpexzftiofx Addek

Condition: refurbished (used), functionality: fully functional, Offered here is an Edwards EH 1200 Booster vacuum pump. The pump was no longer used after its overhaul. Bdjdpjxy Ahnefx Addek

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, Vacuum lifting system by Schmalz, year of manufacture 2018, capacity 25 kg, overhead suspension approx. 8,000 mm x 6,000 mm, includes 2x vacuum pumps and 2x JumboFlex lifters. Forklift available for dismantling. Bodpexy Acrjfx Addsdk

Condition: used, Year of construction: 2006, machine/vehicle number: SV300 + WS1001, 3 sets of Leybold vacuum pump sets: combination SV300 + WS1001 (EUR 4,800/set) Bsdpfx Asxyxrveddjdk

Condition: good (used), Manufacturer: BOC Edwards / Hibon Type: SNH 822 MA / SF 3.22 PC Electrical Motor: 110KW / 1.476 RPM Bdodsxx R Aqepfx Addek

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Busch MM 1142 B VS3 Vacuum Pump Manufacturer: Busch Vacuum Solutions Model: MM 1142 B VS3 Serial Number: D15242694 Bdjdpfx Aexvi Aqsddjk Year of Manufacture: 2015 Capacity: 140 m³/h Weight: 175 kg Dimensions: 1000 mm × 400 mm × 700 mm Pump Type: Dry claw vacuum pump The Busch MM 1142 B VS3 vacuum pump is a modern, oil-free “dry claw” pump designed for efficient and clean generation of vacuum in industrial applications. Its oil-free compression chamber design eliminates the risk of process contamination, making this pump ideal for industries requiring high process purity. The unit features quiet operation, low operating costs, and high reliability. Its compact design makes integration into production lines and central vacuum systems easy. Applications: - Food and packaging industry - Production lines and automatic vacuum systems - Plastics processing, foundry work, printing - Laboratories and central vacuum systems

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: DEGA, side channel blower/side channel compressor with filter -Type: 2XHB510H26 -Drive: 1.6 kW -Speed: 2850 rpm Bjdpfx Adjxu H Smedodk -Flow rate: m³/h -Compaction pressure: 200 mbar -Overall dimensions: 570/800/H830 mm -Weight: 57 kg

Condition: used, length / mm Bdjdpfxsxukvvs Addjk width / mm height / mm

Condition: refurbished (used), The vacuum pump will undergo a complete overhaul upon order placement and will then be ready for operation. We recommend that installation is carried out only by trained personnel. Adaptation material is available upon request. Oil fill: M-VAC 150 Delivery time: approx. 5 weeks Technical Data: Dry claw vacuum pumps Motor rated power: 5.5/6.5 kW (50/60 Hz) Motor nominal speed: 2900/3500 rpm (50/60 Hz) Ultimate pressure: 150 hPa (mbar) (50/60 Hz) Continuous operation ultimate pressure: 150 hPa (mbar) (50/60 Hz) Bdodpfjxt Ephex Addok Rated pumping speed: 290/345 m³/h (50/60 Hz) The filter shown in the pictures is not included in the scope of delivery, but can be ordered as an option. Subject to prior sale! This offer is valid only for customers within Germany and other European countries!

Condition: used, functionality: unexamined, machine/vehicle number: 6207 oder 6299, Pfeiffer DUO100 Rotary vane pump: Pumping capacity: 100 m³/h Speed: 420 rpm Bodpfx Adextfc Isdsdk Condition: used, functional, untested Operating fluid: mineral oil MA100 No warranty

Condition: used, functionality: unexamined, machine/vehicle number: PPW31000/H865 / 6299, Pfeiffer WKP500A / DUO100 Pump Stand WKP500A - Roots Blower Pump: Pumping speed: 500 m³/h Rotational speed: 2800 rpm Bedpfsxtd R Dex Addodk Mains connection / Power input: 220/380V / 50Hz / 1.5 kW DUO100 - Rotary Vane Pump: Pumping speed: 100 m³/h Rotational speed: 420 rpm Condition: used, fully functional, not operated after maintenance Operating fluid: mineral oil MA100 No warranty

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: AM642682, ALCATEL 2063 C2 Bdedpfx Aextb Eroddok 2-Stage Rotary Vane Pump Pumping speed: 66 m³/h Ultimate pressure: Without gas ballast < 5 x 10‐3, With gas ballast < 5 x 10‐2, Mains connection / Power consumption: 380V/4A, Inlet flange: KF40, Condition: good, fully refurbished, Operating fluid: PFPE, 1 year warranty

Condition: used, Ozatec Laminator HRL 350 – Professional Laminating Machine For sale is a high-quality Ozatec Laminator HRL 350, a robust, professional laminator designed for industrial or commercial use. This machine is manufactured in Germany and stands out for its solid construction and reliable technology. Technical Data: Bedpfoxr D D Isx Addedk Model: HRL 350 Type: Laminator HRL 350 Voltage: 230 V, 1 phase / N Total power: 1.4 kW Heating power: 1.2 kW Current consumption: 6.2 A (heating 5.2 A) Frequency: 50/60 Hz Protection class: IP 32 Made in Germany Important Notice: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see picture) (Specifications and information are subject to change and errors excepted!) If you have further questions, feel free to contact us by phone.