Ring Asset Management GmbH

Condition: ready for operation (used), The Herbold FA 3000 Friction Washer is engineered for the intensive cleaning and dewatering of plastic flakes. With a 3 m rotor length, 500 mm diameter paddle rotor running at 1,000 rpm, a 2.5 mm perforated screen, and a standard drive of 18.5 kW (upgradable 11–22 kW), it delivers up to ~3.5 t/h for HDPE and PET and ~2 t/h for LDPE under optimal conditions. The unit features a pneumatically hinged cover, removable access panels, and optional hollow-shaft rotor flushing for automated cleaning. Replaceable wear parts and robust construction help minimize downtime. Technical Data / Performance Specifications Parameter Standard Value Remarks / Range / Options Conveying length 3000 mm Rotor (paddle) diameter 500 mm Rotor speed 1000 rpm Standard screen perforation 2.5 mm Standard hole size for the screen basket Maximum screen perforation 3.0 mm Optional/maximum allowed size Drive power (standard) 18.5 kW Baseline motor rating Drive power (range) 11 – 22 kW Depending on configuration, heavier loads or cleanings Approximate weight ~ 1,300 kg Machine weight without extras or heavy modifications Throughput (approx) HDPE: 3.5 t/h LDPE: 2 t/h PET: 3.5 t/h Dependent on feed quality, contamination, flake size, etc. Functional principle Centrifugal + friction washing / dewatering Material is washed while being conveyed upward; fines / contaminants are expelled through screen. Access / maintenance Removable housing cover, pneumatic hinge, quick clamps Allows maintenance, cleaning, inspection, paddle / screen change Iodoxlkp Depfx Aanotr Rinsing / flushing Hollow-shaft flushing (optional) Option for FA 3000 to flush rotor interior via hollow shaft Wear part replacement Replaceable rotor paddles, screens, other wear zones Minimizes downtime and extended machine life Material construction Housing: stainless steel Rotor: mild steel

Condition: used, Friction washer with stainless steel housing and stainless steel rotor. Itodpfx Aaexgtu Eonjr Motor 22 kW

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Itodpfx Ajxgttzjanjr Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available.

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. Itsdpfxjxcnxds Aanjr The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Year of construction: 2002, condition: good (used), functionality: fully functional, TECNOVA MINI / 60 repelletizing machine Type: ES 60 N / 35D DEG Year of manufacture: 2002, little used, completely refurbished in 2023. Ijdpfjw U Swpex Aanotr Availability: Immediately. Current condition: Can be viewed in operation. Screw: 60, L/D ratio: 35, Capacity: 120-140 kg/h, Feeding screw: yes, Degassing system: yes, Cutting head type: head cutter, Suitable materials: PE/PP/PS. Other specifications: 8 mm diameter granules, Moisture max. 3% Foil silo, capacity 2 m3, Vacuum pump for degassing, Temperature control panel, Pressure control, Water cooling, transport, Venturi, cyclone and pipes, Dimensions: 6.40 m long x 2.10 m wide x 4.30 m high Built-in power: 30 Kw. + film granulator Meccanoplastica Type 3140 (1998) !!! Price included!!! For sale with spare parts: screw barrel, heating elements, filter changer, head cutter insulation, knives for grinder, compactor, silo bearings, cyclone, head cutter.

Condition: not inspected (used), functionality: unexamined, Used screen changer with 11-hole strand nozzle Itodpfx Aasw Nf Rxenor untested As-is

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, A significantly large capacity Float/Sink tank available from this renowned English specialised manufacturer. All mechanical parts are in excellent order , and apart from re-assembly the equipment is ready to go to work . Estimated at a capacity of 4 - 5 tonnes per hour on Rigid materials, this represents extraordinary value, and is available in the UK avoiding Internationaal transport costs and taxes. An inclined friction washer and materials drier/cleaner are also available - photos included. Iedsw D Uggopfx Aanotr

Year of construction: 2014, condition: used, functionality: fully functional, Blade mill brand Molina model MG1600 electric motor 160 kw 12 fixed blades 90 blades mounted on the rotor complete with spare blades and grids. Ijdpswnygtsfx Aanotr

Year of construction: 2010, operating hours: 4,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N/A, Technical Specifications • Screen Drum Diameter: 1,200 mm • Working Length: 2,300 mm • Drive Power: 55–132 kW • Dimensions: o Length: 3,600 mm o Width: 2,600 mm Iodjwm Nfvopfx Aanjtr o Height: 2,300 mm o Height with Open Cover: 4,100 mm • Screen Perforation (Standard): 2.5 mm • Throughput Capacity: o Rigid Plastics: Up to 4.0 t/h o Films: Up to 1.8 t/h

Condition: new, Year of construction: 2025, Mill without screen Xtra2-A / 26.26 St Low-speed mill without screen, with two coarse crushers, compact and mobile on 4 wheels, 2 of which with brakes. The feed hopper and cutting chamber can be easily and completely opened via a hinge mechanism and quick lock, which allows for quick and easy cleaning. Shredder-type rotor with two primary coarse crushers, each with three crushing fingers, which also allow for the crushing of awkward and larger pieces of scrap. Control with contactor and electrically redundant safety limit switches. The control unit is integrated in a plastic housing, including a 4-meter connection cable and a CEE 16A/6h plug. Standard Z-hopper made of transparent polycarbonate (PC) sheet with a wide loading opening. Collection box for ground material with a capacity of 8 liters, includes a suction hose for connecting a pipe with a diameter of ND 38 or 40 mm. Technical data: Itedpewktvgofx Aanjr • Motor power: 1.5 kW • Power supply: 3 x 400 V, 50 Hz • Cutting chamber opening: 260 mm x 260 mm • Primary shredders: 2 pieces, each with 3 shredding fingers • Rotor speed: 32 rpm • Rotor: multi-tooth, 3 pieces • Static knives: 2 x 3 hardened knives • Cutting configuration: standard cutting module 4 mm (rotor tooth width); optional 5 mm

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2SG00002246, High-quality gear motor. The cutting chamber and gear motor of the SG-24T are from world-renowned manufacturers. Iedov Unt Aopfx Aanotr The SG-14/24N series features a combined tooth and blade cutting edge. The cutting blades break large pieces into small ones, and the tooth cutting edge shreds the material with less dust. The cutting edge is designed to the desired size so that it can be reused immediately. The innovative cutting edge with inclined teeth reduces the possibility of stress concentration. It extends the service life and reduces dust generation. The motor shaft and rotor shaft of the SG-14/24T/24N are connected with a shaft coupling, allowing for convenient motor replacement. A signal light indicates a motor blockage, which can be cleared by reversing the motor. It automatically returns to normal operation once the fault is resolved. Compact design, easy to maintain and clean. Feed hopper made of transparent PC.

Year of construction: 2016, condition: new, functionality: fully functional, HDPE Film washline Itjdpfotuui Dex Aanjr construction year: 2016 0 working hours (was never in operation) brand: NEUE HERBOLD, D-74889 SINSHEIM consisting of: Wet-granulator type SM 450/600-S5-2 Friction washer type FW 560/3000 Conveying screw Floating tank (Floating - sink separation) type TB 500 Mechanical Dryer type TM 1005 Suction Unit type MFT 55/500 Electric control

Condition: good (used), Crystallizer for PET recycling Year: 2008 Isdpfxenxkd Ij Aanetr

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric Itodpfxoi Dtbus Aanjr > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer Itsdpfxsiyynwj Aanjr > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Itedeiyya Aopfx Aanor Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2024, condition: new, RSS 600 series Mono Rotor Shredder new model 2023 full options model. 18.5kw Itodpfxsirt H As Aanor 40x40 knife block. rotor length approx. 600 mm infeed hopper approx. 600 x 900 mm Screen size in consultation motor cover and pusherbox guide strips as well PLC controlled with Reverse action as well an manual reverse. Conveyor and/or discharge screw is optional available. CE certificate/ Dutch suitable for various types of plastic/wood/or other material delivery in consultation Adjustments to e.g. motors, sieve, frame possible. Infeed or discharge conveyors, storage, metal separation possible. Larger or smaller models also available. Intrested, reactions with your name, company name and telephone number. We will call you.

Year of construction: 2017, condition: like new (used), Basic data: - Output up to 400 kg/h - Built-in dimensions: 12 809 x 4 639 x 4 185mm Isdpjimgn Sjfx Aanjtr - Total weight 17 t - Total input power: 250 kW - Controlled by PLC Schneider The line consists of: -Single screw extruder BOCOMATIC - EB/A 130 - extrusion screw with a diameter of 133 mm - working length: 46 L/D - Feeding hopper - Double piston melt filter with forced backwash - Water ring granulation device with water trough - Vertical water centrifuge

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 Itsdpfx Aash Eydujnsr twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Year of construction: 2011, condition: reconditioned (used), No.2401 1 used melt-Filter / screen-pack-changer back-flush / self-cleaning ECON Type: ESK 480-4B y.o.m. : 2011 2 pistons each 2x Ø 123,5 mm 2 pistons : each 2x Ø 176,3 mm complete incl. Hydraulic pack Siemens Panle control The Filter can be inspected in our workshop , date shortly by appointment. You´re welcome More melt-filter / screen-pack-changer ex our machine-stock Wuppertal - Germany available : EREMA RS and Laserfilter Kreyenborg K-SWE / RS Ettlinger ECO BD Plast Alphatec Gneuss Itsdpfxegbfwmo Aanor Brit-Ass

Year of construction: 2022, condition: as good as new (ex-display), Shredder typ PYTHON 1300, with 7 KW electricmotor, 400V 50Hz• • Hopperopening 1300 x 700mm • Main dimensions L 2100 x B 850 x H 1600mm • Outlet opening ca 400x 100mm • Height under output ca 400mm • Electric cabinet, mainswitch, selector switch aut/man. ON/OFF switch, Emergency Push button Itsdpfsf N Nl Djx Aanjr • Easy handling/ transport by forktruck or lifting eyes • Weight ca 1100 kg • Machine Manual incl.. • Paint in RAL 3002 and RAL 7022 • (subject to technical changes) • CE certified and “Made in Holland”

Year of construction: 2025, condition: new, To separate and sort after the specific weight from light and heavy fraction. Useable for grain, aluminium/plastic, rubber/textile, cable-recycling, etc. Type and size are selectable, depending on the product and throughput. Itjdpfxe Snd Ne Aanor At constant machine length, it is possible to choose between working width from: 450mm, 600mm, 900mm.