Used drilling equipment - vertical for sale (35)

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Hjdsx Uyzqepfx Adwsfb ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2004, Serial number: EKJ0043xxxx Please contact ATS Norway for more information Hfsdpjxy Eyasfx Adweb Please provide reference number upon request: 21885 Specifications: - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg

Condition: excellent (used), functionality: fully functional, power: 125 kW (169.95 HP), emission class: euro5, Year of construction: 2018, operating hours: 4,500 h, Conrad Boxer 200 drilling rig with desanding unit Advanced wash drilling system, ideal for clay soils and geothermal applications. Includes 150 meters of drill pipes. The machine is equipped with a custom sand separation unit that efficiently separates clay and water, optimizing the drilling process. Hydraulically driven crawler chassis with rubber-vulcanised track shoes, track width 400 mm. Self-supporting welded steel subframe with stabilizing cylinders. Iveco NEF 45 ENT diesel engine, approx. 125 kW. Fully equipped hydraulic system with stainless steel reservoir. Modem installation for remote diagnostics. Radio remote control for travel and drilling functions. Fixed control panel with lockable enclosure. Hydraulically folding mast for 4 m drill rods. Mast translation system with 400 mm stroke. Vertical hydraulic feed system. Drill carriage and guide rail system. 4-inch hydraulic drill head Conrad T-4-5-600. Hydraulic tilting system. Weight compensator for drill rod protection. Hose and cable management system. Hydraulic top clamp. Hydraulic flushing pump. Prepared for displacement pump installation. Hydraulic piston pump. 3-inch water circuit with flow meter. Flow control valve. Hydraulic breakout clamp. Drill rod storage cassette. Hfodpfox Uyukjx Adweb Pipe handling manipulator. Automatic lubrication system.

Condition: excellent (used), functionality: fully functional, power: 735.5 kW (1,000.00 HP), Year of construction: 2015, Oil drilling rig National 80 UE 1000 HP Hfsdpfxjx Nc Ddj Adwsb Year of manufacture: 2015 Fully operational

Condition: excellent (used), operation weight: 21,000 kg, Year of construction: 2008, operating hours: 16,850 h, Equipment: air conditioning, Sandvik DP1100 Year : 2008 operation hours: 16.850 hrs Hammer hours: 8.180 hrs ROPS Airco Back drive camera Hodpfx Aex Nh Tdjdwofb incl. drill rods 1 × drill hammer CAT engine CE U/C : 60-70% good operation weight : 21 to

Condition: used, Year of construction: 2012, operating hours: 6,006 h, Equipment: all wheel drive, TM Bohrtechnik TMB 25 drill rig, year of manufacture: 2012, operating hours compressor: 6,006h, operating hours diesel engine: 8,718h, 6x drill rods, drill head, dust collector, ready for immediate use, good condition, German machine, On request, we can make you a leasing or financing offer from Mercedes-Benz Bank, Mr. Ebert (Tel.) will be happy to assist you, Further information can be found on our homepage, Subject to errors and prior sale! _____ TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2012, working hours kompressor: only 6.006h, working hours diesel engine: 8.718h, 6x drilling pipe, drlling head, dust collector, ready for work, good condition, german machine, Upon request, we will submit a leasing or financing offer. Mr. Ebert (Tel gladly assist you, For more information, visit our homepage, mistakes and prior sale reserved! Hfedpfx Asrrbm Rjdwsb

Condition: used, Year of construction: 2010, operating hours: 2,635 h, 2010 | Atlas Copco Boomer XE3C with COP 1838, very good condition, one defect (EPIROC) | Used Drill | 2635 hours 📍Location: Switzerland, Weite 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 98000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 49 inspection points 46 approved ✅ 2 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: Honest machine from two-tier system, three drilling arms, an additional tamping platform - no maintenance backlog, drive axle "with one blow" broken, no decomposition of the tooth flanks, rather shaft fracture suspected, no external bursting of the differential housing or the axle journals, casting in order. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39154 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform. Hfodpoxzhf Iofx Adweb

Condition: used, Year of construction: 1989, Please contact ATS Norway for more information Please provide reference number upon request: 21250 Specifications: 1989 model Hours: 5520 Hammer is working Needs a new battery Winch and vacuum are working according to the owner Ready for delivery. Hfjdpfxsw Ucm Us Adwsb Own weight: Engine hours: 5520 Model: 712HC-01

Condition: like new (used), power: 242 kW (329.03 HP), fuel type: diesel, overall weight: 24,300 kg, Equipment: Rearview camera / GPS compass Total drilling depth: 252,155 m Borehole navigation system: HNS without base station Hydraulic drifter COP 3060 CR / COPROD 76 (90-105 mm): Impact power: 30 kW / Impact frequency: 50 Hz / Torque: max. 2,450 Nm. Atlas Copco compressor C146-07: Delivery rate: 233 l/s (13.4 m³/min) Pressure: 12.0 bar Water mist system: with 400 L tank Stabilization: Rear hydraulic cylinders Hammer hours: 2,641 h Dust extraction unit DCT: Hydraulically driven Drill feed: Aluminum with chain feed and double hose reel Hsdpfsxqpv Hox Adwsfb Progressive RCS drilling system including collaring automation: Anti-jamming automation, automatic flushing air monitoring Engine CAT C9.3 Tier 4 final: 242 kW Feed: Automatic positioning / Automatic addition and retrieval of drill rods Rod changer magazine RHS: Automatic, 8 rods, each 4.5 m

Condition: used, functionality: fully functional, power: 257.42 kW (349.99 HP), overall weight: 22,500 kg, Year of construction: 2009, machine/vehicle number: 08-12-987, Conrad Boxer 300 Combi – Flushing and Suction Drilling Rig Specifications Brand/Type: Conrad Boxer 300 Combi (Combi 300HD) Serial No.: 08-12-987 Year: 2009 Hfodpfx Adexrd Rhowsb Weight: 22,500 kg Power: 280 kW Engine: Volvo, installed in 2024 TYPE TD 121 G - 350 PK Drill pipes: approx. 42 pcs, length 5 m, Ø 90/80 mm Flushing and suction drilling system

Condition: excellent (used), functionality: fully functional, mileage: 100 km, Year of construction: 2021, Flushing/mixing unit sporadically used. Compatible with Vermeer, Ditch Witch, and TORO. Fully operational. The Ditch Witch FT5 model is a fluid management and drilling fluid mixing system, used for pipe ramming and horizontal directional drilling (HDD) applications. Year of manufacture: 2021. Mud tank/drilling fluid tank capacity: 200 gallons (approx. 757 L) Maximum fluid flow to drilling unit: 18 gpm (approx. 68 L/min) Engine: Honda GX160 (single-cylinder, air-cooled) Hodpfx Adoxrppcewofb Standard dimensions: - Length: 1.85 m / with hose and valve: 2.13 m - Width: 0.813 m - Height: 1.36 m Dry weight: approx. 182 kg Weight with filled tank (full with water): approx. 939 kg The unit features a narrow tank, allowing it to be positioned alongside a drill rig on a trailer – facilitating easy transport to the jobsite. It is equipped with a venturi wet hopper for effective mixing of additives with the fluid, expediting mixing cycles. The design is relatively straightforward, with several configuration options to adapt the equipment to various field setups. The FT5 series is part of the Ditch Witch fluid management systems line. The listed price is net and applies to export and companies. Significant discount possible for private customers. We invite you to contact us directly by phone to get your best price!

Condition: excellent (used), Year of construction: 2015, operating hours: 3,093 h, Make of engine: Deutz 6 cylinder CE mark: yes Hodpfxjxykvaj Adwjfb Technical condition: very good Visual appearance: very good Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Delivery terms: EXW Production country: SE Please contact Christiaan Dekker for more information Atlas Copco Boomer WE3 C30 Year: 2015 Hours: 3093 1000 volt CE certified Gross weight: 54.7 ton Diesel power180KW 6 cylinder engine Electric power 28KW/ 320Ampere Hydraulic tilt cabin Prepared for Leica GPS Rotary air drills COP 3038 drills Hydraulic waterbooster Hydraulic Compressor Hydraulic manbasket Tyres 90% good Price Euro. 129.000,-

Condition: good (used), functionality: fully functional, Year of construction: 2001, operating hours: 9,413 h, machine/vehicle number: 101T2551-1, - Engine power: 179 kW/2200 rpm - Engine type: Caterpillar 3126 DITA - 6 cylinders - Machine weight: 17.5 tons - Width: 2.50 m - Height: 3.10 m - Length: 9.70 m Hodpfx Adev Nhyfowsfb

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Hfjdpfxjw Rag Dj Adwob Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery.

Condition: used, Year of construction: 2007, operating hours: 10,250 h, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Upper carriage : Sennebogen BS 100 Under carriage : Bauer UW 130 Engine : CAT C15 / 433 kW Rotary: Bauer KDK 390 S Kelly: BK 40 / 470 Hfsdpfxeh Tyzbs Adwjb Main winch : 30 to Ballast 6+6,5+11,5 to

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Hfodpfx Adewvzrmswob Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI

Year of construction: 2005, operating hours: 9,000 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information BAUER BG 28 V Year of Man. 2004/5 Base carrier Sennebogen BS 80 Under carriage UW 110 CAT Engine 354 kW Rotary Head KDK 275 S Prepared for Kelly, CFA, FDP & FOW Hsdpfsh Tyy Eox Adwjfb Prepared for BAUEr oscillator

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Hjdox Anauopfx Adwsfb Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO

Year of construction: 2008, operating hours: 9,750 h, condition: used, Piling rig RTG RG 25S -Upper carriage : Sennebogen BS 80 R -Engine : CAT C 18 570 kW -Optional : Vibrator MR 125 V, KDK 232 S, DKS 100/ 200 Hfedpfjh Tyz Ajx Adwjb -Additional : Systems Vibrator, Kelly and CFA drilling central lubrication, air compressor , prepration CSM The machine is in very good working condition!

Condition: used, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21854 Specifications: 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Hfsdpfx Adjxypt Rswsb Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135

Year of construction: 2014, operating hours: 7,950 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Hfedpfoh Ty Agex Adwjb Engine LIEBHERR 505 kW Rotary Head BAT 510 Prepared for oscillator Good working condition immediately available

Condition: used, Year of construction: 1996, Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21912 Specifications: Hedpsxz N Ahsfx Adwjfb 1996 model 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Year of construction: 2009, operating hours: 500 h, condition: used, Field of application: Construction Please contact Mohamad Fattah Ahmad for more information Hfodjh Tyyhopfx Adwsb Base carrier: Sennebogen BS 80 R Under carriage: BAUER UW 95 R Engine: CAT C 18 with 570 kW (no AdBlue nocessary) Available applications: Kelly rotary head KDK 235 S / double head rotary DKS 100/ 200 -02 / Vibrator MR 125 V This machine got only 500 running hours and is like NEW !!!

Condition: used, Year of construction: 1986, Serial number: 606xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21730 Spesifikasjoner:  1986 modell Motortimer: ca 3000 6 sylindret Dutch motor Skiftet motor   HLR 438l hammer  Vernebur  Understell (se bilder)  Maskin bredde: 231 cm  Vinsj  Støvsuger  Lys  Video  Leveringsklar      Beskrivelse: Vi har en 1986 Tamrock DHA400 Borerigg m/ HLR 438L hammer for salg.  Riggen fungere, men feil og mangler kan forekomme og noe påkost må regnes med da den er ifra 1986. Leveringsklar. Own weight: 1 Hfodpexu A N Uefx Adwjb Engine hours: 3000 Model: DHA400 Borerigg m/ HLR 438L hammer

Condition: used, Year of construction: 2012, Serial number: 120705xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21979 Specifications: - 2012 model - Hours: Owner is uncertain Hodsx Dhakopfx Adwsfb - Double key - Deutz Engine - Water tank - Undercarriage (see pictures) - Washer - Comes with drilling equipment, 3 hammers - 4-10 inch holes - Services have been done myself - Ready for delivery Own weight: Model: 2012 Gemsa Brønnborerigg