İki̇ Meşe Danişmanlik Ve Ti̇caret Li̇mi̇ted Şi̇rketi̇

Condition: used, machine/vehicle number: 008357, Max. panel width: 4400 mm Max. panel length: 4300 mm Codpfx Adjx A Tk Ejdshf Main saw blade projection: 75 mm No of Grippers: 9

Condition: used, machine/vehicle number: 008339, Max. panel width: 3800 mm Max. panel length: 1600 mm Main saw blade projection: 95 mm Chsdpfx Ajx A Tkrsddjf No of Grippers: 6

Condition: used, machine/vehicle number: 008330, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 80 mm Codpfex A Tkljx Addshf No of Grippers: 9

Condition: used, machine/vehicle number: 008302, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 125 mm Codpfx Adsx A Tkfedohf No of Rip saw Grippers: 8 No of Cross Cut Grippers: 4 Second flexible pusher: yes Thin sheet loading: yes

Condition: used, machine/vehicle number: 008206, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 9 Cjdpfxsx A Tizj Addehf

Condition: used, machine/vehicle number: 008177, Max. panel width: 4300 mm Max. panel length: 4300 mm Main saw blade projection: 125 mm No of Grippers: 7 Csdjx A Tamspfx Addshf

Condition: used, machine/vehicle number: 008236, Max. panel width: 3200 mm Max. panel length: 3200 mm Main saw blade projection: 65 mm Chedsx A Hc Uspfx Addef No of Grippers: 7

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: ZH-3316, overall weight: 3,000 kg, table length: 2,680 mm, table width: 1,450 mm, Purchased new in 2021. Very good overall condition. Ideal for cutting veneer, cardboard, paper, etc., and suitable for high production volumes. All essential settings for cut quality and precision are conveniently located on the front of the machine. Highly precise motorized rear stops, controlled via the digital display on the control console. Cutting parameters are adjusted on the console and can be fine-tuned using a handwheel, allowing for quick and accurate setup. Photoelectric safety: safety sensor protects the operator during blade operation. Emergency stop with access at the front of the machine. Cutting line illumination. Stroke counter. Technical specifications: • Maximum cutting length (mm): 2680 • Maximum cutting width (mm): 1450 • Maximum cutting thickness for wet veneer (mm): 60 • Maximum cutting thickness for dry veneer (mm): 30 Chedpfx Adoxzrfxedsf • Blade size (mm): 2680*140*12.7 • Motor power (kW): 4.37 • Machine dimensions (mm/inch): 4200*2300*1700 • Weight (kg): 25 • 380V 3PHASE 50HZ Extras: Sold with new spare blade and a new Teflon plate.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Edging saw Producer Strojírna Loučná Year of manufacturing 1999 Main drive 11kW Saw diameter 200mm Cedpfx Adexzntxodehf Cutting widht 200 mm Cutting high up to 30 mm

Condition: used, Year of construction: 2001, functionality: fully functional, Two pneumatically lowered heads with 330 mm diameter saws. Left head – stationary, right – movable. Cutting heads of P models are tilted with the help of pneumatic cylinders. Has a “two-hand” control mode and an instant saw stop device. General characteristics 1 Motors 2 pcs. x 1.1 kW, 380 V 2 Number of revolutions 3765 rpm 3 Saw diameter 330 x 30 mm 4 Saw head tilt 90º- 45º 5 Rotation -45º- 90º- 45º 6 Max. cutting length 3335 mm, 7 Min. cutting length (all models) when heads are turned inward 45º 420 mm 8 Min. cutting length when heads cut at an angle of 90º 365 mm Csdsxytnlspfx Addjhf 9 Max. dimensions of cut workpieces when cutting 45º (HxW) 90 x 100 mm 10 Max. dimensions of cut workpieces when cutting 90º (HxW) 90 x 145 mm

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, workpiece length (max.): 2,600 mm, workpiece height (max.): 45 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. machining length: 2,600 mm Max. machining height: 45 mm MACHINE DETAILS Chjdpfxsxxapgj Addof Installed total power: 6.5 kW

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains Cedpfx Aoxvc Rzsddehf 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: excellent (used), For panels measuring 5600 x 2600 (2700 mm), thickness from 2 mm to 60 mm N° 2 double-deck infeed roller conveyors, 1 x 6.000 mm long and 1 x approximately 3.800 mm long Hydraulic lifting table (5600 x 2700 mm ca.) System with rubber wheels (11 top + 11 bottom) for panel pressure/feeding Sliding bridge with 45 suction cups and 5 supports (for panel stack alignment) 1st Rear - Pusher, with 11 clamps Rotating table (90° panel rotation) with plastic wheels 1st Panel Saw AH8 580 - Max cutting width mm 5600 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Csdpfx Aoxvc N Doddjhf Main Sawing Unit (max. diameter saw / power) mm 520 ( Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Sliding crosspiece with 7 pushers for cut panels With 4 supports (for panel stack alignment) and 3 motorized chains 2° Rear - pusher, with No. 25 (27) clamps/grippers 2nd Panel Saw - Max cutting width mm 2700 (Max blade projection mm 165) Scoring Unit (max. diameter saw / power) mm 200 ca. (Kw 2,2 ca.) Main Sawing Unit (max. diameter saw / power) mm 520 (Kw 32) Adjustable speed of the saw carriage (m/min) 0 - 150 Waste evacuation system with grinder VECOPLAN (Kw 55) Plastic wheels coated table for cut panel output Stacking system for cut panels with N° 2 front support tables with air blowing system 400 x 6300 mm + N° 8 lifting tables (4 are 1300 x 1600 mm and 4 are 1300 x 1410 mm) - Total power KVA 130

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 160 / 2018, overall weight: 4,600 kg, positioning accuracy: 0.01 mm, table width: 500 mm, air demand: 1 m³/h, compressed air connection: 6 bar, warranty duration: 12 months, working height: 150 mm, saw band length: 6,170 mm, saw band width: 90 mm, wheel diameter: 1,000 mm, wheel width: 80 mm, Generallly refurbished from 330 mm version to 500 mm in 2025: - complete new conveyor system with chromatic table - complete new driven infeed top pressure system - new electrical cables on the machine, new pneumatic and oil lines. - new crowning on main wheels - new main shafts & bearings - all linear guides are new Heavy-duty horizontal Thin Cutting Band Saw for all your re-sawing applications, including flooring, windows, doors, furniture and musical instruments. Put these advantages to work in your operation: - Steel Table at the cutting spot for the highest precision - High precision lamellas with gluable surface in tolerance ± 0.15 mm, depending on lamellas width - Divided Feed Conveyor with Top Driven Infeed Pressure Unit - Bearings on both sides of the Main Wheel Shafts for maximum cutting stability - Saw Monitoring during machine operation Cedpfjxtmqmex Addjhf - Heavy-duty, cast-iron construction-built for longevity and superior tolerances - CNC touch-screen control panel for easy height adjustment - Thin-kerf, high-tension blades to minimize your waste - Handles material up to 500 mm wide, 150 mm thick - Adjustable cutting speed and feed speed as well - Produces smooth, gluable surface - Variable feed up to 16 m/min. - Cutting speed up to 50 m/s

Condition: new, Year of construction: 2024, Automatic length measuring and positioning system for all STROMAB crosscut saws, as well as similar machines from other manufacturers. It serves both as a stop and for workpiece positioning. Consists of: Aluminium profile 105 x 90 mm, anodized Toothed belt drive 32 mm, reinforced with steel wire Stepper motor 6 Nm, multi-voltage 115 - 230 V, 50/60 Hz Repeatability +/- 0.1 mm Positioning speed 60 m/min SMART 7 Control Unit with 7-inch touch screen Absolute and incremental processing mode 8 pre-set standard values 2 software versions with different optimization levels Chedoxraucopfx Addjf available optionally. ZM 415 – Usable working length 4,500 mm ZA333 – Roller table 4,500 x 280 mm, RD 32 mm ZA341 – Front support 4,500 x 260 mm ZA373 – Locking cable for customer’s own crosscut saw

Condition: like new (used), Motor power 5.5 kW Cutting length 3000 mm Maximum height 60 mm Csdpfx Asxnzuveddjhf Hydraulic knife movement Hydraulic clamping Photocell protection

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automated saw for quality sorting of boards – Edger-Crosscut Saw-Conveying Unit for Sawmill Timber Grading JRIMAC Twin-Cut This installation is designed for sawing and optimal sorting to separate grades. Edger (complies with current safety standards): Cutting length 6.0 m – Cutting height 120 mm – Maximum cutting width against stop 380 mm – Retractable saw blade cuts in both directions (forward and reverse) – Pressure bar with safety device – Positioning lasers – Adjustable cutting speed. Crosscut Saw: Cutting unit at both ends – Unit 1 is fixed – Unit 2 can be positioned at 4,000 mm, 5,000 mm, and up to 6,000 mm. Conveying Unit – The board is fed from the right to the edger by toothed wheels – The operator rips the boards longitudinally and marks the quality (X, O, //, etc.) – Offcuts are automatically discharged at the rear into a trolley – The edged timber is conveyed and crosscut automatically to the desired length – End trimmings are ejected into containers or bags – The timber continues on roller tracks to be picked up and stacked by a third party according to its grade. Scissor Lift Table (not included in the machine price): Upstream, the timber is placed on a scissor lift table and brought to the height of the edger/operator. Chedpfx Adsxm R U Aedef 400 Volts – 63A – 22 kW – 550 mm blade diameter – Control panel with programmable touch screen Machine dimensions: Length 8.80 m x Width 4.40 m x Total height 3.50 m – Length of conveying unit to stacking area: 15.0 m – Full footprint fits within a rectangle of 8.80 x 19.5 m – 3,200 kg Existing customer base: There is currently a steady clientele in French-speaking Switzerland for timber selected based on quality criteria – This external market is also available for sale. The machine is in good technical and visual condition – Available mid-December 2025 (Y07-pa300k-ppoc100k/pv30k)

Condition: like new (used), Year of construction: 2020, Total Cutting Performance: 24,000 linear meters Cutting length: 4400 mm Chodjxlthpopfx Addof Air-cushioned machine table, version with stop ruler on the left Width stop / Cutting width: 3100 mm, with SL 4400 welded steel construction – absolutely stable and torsion-free, running on linear guides Angle air-cushion table and stop ruler: 1800 mm 2 air-cushion support tables: 1800 mm Additional air-cushion support table: 1800 mm (total of 4 tables) 4 feed rollers on the front side (1 per table), Part No. 5030631 Electrical system: Standard 400 V, 50/60 Hz Saw carriage: Cast version for SL 4400 Main saw motor: 7.5 kW, 400 V, 50/60 Hz Scoring unit motor: 2.2 kW with electric adjustment Automatic cutting length detection Motor-driven groove height adjustment Automatic / manual infinitely variable cutting height adjustment Quick-change clamping system: Pro-Lock Side alignment Single Press SL 4400, pneumatically and program-controlled Max. number of workpiece clamps: 9 workpiece clamps (6+3) for cutting length 4400 mm Operator console: CUTCONTROL 2 multitouch control system, 21.5" Full-HD screen, 16:9 format Manually operated device incl. stand Label printer and software Uninterruptible power supply (UPS) EASY-PLAN – Dongle version OPTI-CUT – Machine software Opti Pro – Office optimization software

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Max. panel length: 3200 mm Chodoxaudzopfx Addof Main saw blade projection: 110 mm No of Grippers: 11

Condition: good (used), Sandwich saw Underfloor type Brand: Holzma Cutting range: 1500 mm Cedpfxexam R Hj Addshf

Condition: refurbished (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 66184003, type of input current: three-phase, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 380mm Chipping Width : 650mm Rotor - Diameter : 1200mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 30-40 t/h (Depends on kind of material, material mixture, type of feeding and humidity) Cjdpfxow U A Skj Addohf Chipping Length : Approx. 25mm Electric Motor : 2 x 125kW Voltage : 380-400V Geared Motors : 2 x 11kW Sew Eurodrive Infeed Rollers : 9 Pcs Feeding : Horizontal Drive : By Belt

Condition: used, machine/vehicle number: 008021, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 125 mm Cedpfx Adew Uz Spodshf No of Grippers: 11 Panel Rotation Station: yes Thin sheet loading: yes Vacuum sheet loading: yes

Condition: used, machine/vehicle number: 008158, Max. panel width: 4300 mm Max. panel length: 2200 mm Main saw blade projection: 120 mm No of Grippers: 9 Chedpfx Aew Tiv Heddof Second flexible pusher: yes Panel Rotation Station: yes Thin sheet loading: yes

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: TH 600 / 1050 / 11, overall weight: 35,000 kg, type of input current: three-phase, total height: 2,310 mm, total length: 4,400 mm, total width: 2,906 mm, input voltage: 380 V, feed length X-axis: 1,054 mm, feed length Z-axis: 651 mm, The details pertaining to the machine are provided below. 1)The quoted price pertains to the machine labeled as No. 1 in the drawings provided in the images. 2)The other units shown in the image, which are designed to operate synchronously with the machine, can also be quoted upon request. -Unit No. 2 functions as a large vibration conveyor and is the initial unit onto which the logs are loaded. Chedpfow S In Eox Addof -Unit No. 4 is used as a small vibration conveyor and includes a screen for separating smaller products. -Unit No. 5 is a product transfer conveyor equipped with a metal detector unit. -Unit No. 3 is a screw conveyor. It is positioned beneath Machine No. 1 and transfers the chips to the product transfer conveyor. -Unit No. 6 transports the produced chips to the designated area. Chipping Height : 600mm Chipping Width : 1050mm Rotor - Diameter : 1600mm Number of Knives : 3 chipping knives and 1 counter-knife Infeed Capacity : Approx 50-150 rm/h (Depends on kind of material, material mixture, type of feeding and humidity) Chipping Length : Approx. 25mm Electric Motor : 2 x 400kW Voltage : 380-400V Geared Motors : 2 x 15kW Sew Eurodrive Infeed Rollers : 11 Pcs Feeding : Horizontal Drive : By Belt GT54 x 2

Condition: used, machine/vehicle number: 008131, Max. panel width: 4300 mm Cjdsw Idh Hopfx Addjhf Max. panel length: 4300 mm Main saw blade projection: 80 mm No of Grippers: 7