Used Axa Vsc for sale (33)

Condition: used, Hydraulic power pack, hydraulic pump, hydraulic pump, hydraulic pump -Motor: 0.25 kW 1410 rpm -Max. Pressure: 110 bar -Max. Liter output: l/min -Hydraulic tank -Pressure relief valve: 1 -Valve: 1 -Dimensions: 350/250/H435 mm -Weight: 32 kg Hfedpedpyzrefx Adweb

Year of construction: 2002, condition: excellent (used), X-4.000 / 2x1.750 , Y-900 , Z-700 ,SK 40 , 60-6.000 U/min , 2 Werkzeugwechsler für 72 Werkzeugaufnahmen, Siemens 840 D , Heidenhain Meßsystem , 3D- Meßtaster Renishaw , BLUM - Werkzeugbruchkontrolle , Hfedpfxsgb Rq So Adwjb Späneförderer , Bandfilteranlage

Year of construction: 1988, condition: ready for operation (used), Travel X/Y/Z: 1820mm/350mm/480mm, table dimensions X/Y: 1900mm/450mm, tool holder: SK40, speed: 12000rpm, tool positions: 22, dimensions X/Y/Z: approx. 5100mm/2800mm/3100mm, weight: approx. 7000kg, control: Heidenhain TNC 355. Hedpfjt Dpn Nex Adwefb

Condition: ready for operation (used), Year of construction: 2009, operating hours: 34,858 h, Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 5 Spindle Speed 9000 RPM Tool taper SK 40 Hjdpfxex Sz Els Adwofb Movement X-Axis Movement 3000 mm Z-Axis Movement 850 mm Y-Axis Movement 900 mm This 3-axis AXA VHC 3-XTS was manufactured in 2009 and features a robust 5-axis simultaneous machining capability. It boasts a large X-axis travel of 3000 mm, Y-axis travel of 900 mm, and Z-axis travel of 850 mm. The machine includes a high-capacity tool magazine with 82 positions and a maximum spindle speed of 9000 rpm. Additionally, it supports internal coolant up to 40 bar and has a new spindle installed last year. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Manufacturer: AXA Type: HFB 600 Hedpfxet Tdp Te Adwsfb Control system: Siemens 840D Solutione Line Year of construction: 2015 Specifications: Metric Metric US Standard There are no specifications for this machine (yet). Dimensions (estimate) length 7800 mm width 2300 mm height 2250 mm weight 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approx. 17m long tubes is done by an NC-controlled feed unit and an NC-controlled facing slide with 2 ABS tool holders for either lathe tools, measuring sensors or measuring probes. The work piece is first measured via the measuring sensors in the slide heads and aligned by the adjustable roller supports. The tube is hydraulically tightened into position by the swimming jaw once it lies at a right angle and centric to the facing slide head. The interchangeable measuring sensors calculate how to process the surface whic

Condition: new, AXA 360° swivel cantilever crane Max capacity : Kg 500. Max height : mm 2804. Max overhang : mm 1360. Easily maneuverable due to 360° rotation and high load capacity pivoting wheels with bumper supports and parking brakes. Due to the frontal footprint of only 995mm, it can be used in aisles and confined spaces. The lifting arm is extendable in 4 different positions. Hfodpfsgypgdex Adwsb

Condition: used, Year of construction: 2006, operating hours: 13,016 h, functionality: fully functional, machine/vehicle number: 86664, travel distance X-axis: 2,940 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 950 mm, overall weight: 16,500 kg, number of slots in tool magazine: 36, Equipment: documentation/manual, - Year of manufacture: 2006 - One owner, used exclusively by us - Fully functional, powered on, ready for demonstration Hodpfx Aex Hhfbodwsfb - Control: Heidenhain iTNC 530 - Control on: 32,532 hours - Program run: 13,016 hours - Spindle: SK 40 / 12,000 rpm | 40 kW - Tool magazine: 36 positions - Travel X-axis: 2,940 mm - Travel Y-axis: 900 mm - Travel Z-axis: 950 mm - Rotary table: Ø1000 mm - 3D probe: RMP 60 Renishaw - Tool probe: TT140 Heidenhain - Coolant through spindle: 40 bar Net price ex location Luckenwalde (Germany), unloaded, without transport

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, Portal Machining Center – Universal – 5-axis machining Brand: AXA / Type: VPC-40-U / Year of construction: 2003 Description: Compact gantry design with overhead guides,automatic 1-axis swivel head and integrated NC rotary table for 5-sided machining. Condition: Ready for use / operational Operating hours (switch-on time): approx. 63.400 h TECHNICAL DATA Machining paths: - X-path (longitudinal movement): 2.300 mm vertical / 2.000 mm horizontal - Y-path (cross movement): 1.200 mm - Z-path (vertical movement): 600 mm - Distance between table and spindle nose: Zmin vert./hori. 110/160 mm - Rotary table – spindle nose: Zmin vert./hori. 110/160 mm Working table: - Table clamping surface: 1.100 x 1.100 mm - Table load: 1,5 tons Feed rates: - Max. Feed force: 9.000 N - Rapid traverse in X/Y/Z: 20/20/20 m/min Main drive / Spindle head: - Main drive AC – Hollow shaft motor 40 % ED: 30 kW - Speed range, continuously variable: 30 – 10.000 rpm - Tool holder: SK 40, DIN 69871A / 69872A Tool changer (chain magazine) - Tool stations: 36 positions Working spindle: 1-axis swivel head with 1° pitch Hirth spline instead of the standard 2.5° pitch. NC - Horizontal rotary table integrated into the machine table: - Rectangular face plate 1.100 x 1.100 mm EQUIPMENT / ACCESSORIES: - CNC-Control: Heidenhain iTNC 530 - Table height increase: fixed table by 150 mm. This means that the top edge of the fixed table and the rotary table are at the same height. - Coolant through the spindle - Chip conveyor (hinged belt) - Integrated 200 l coolant tank with pump for external cooling - Full machine enclosure Hfjdpfjx Np Dqox Adwsb - Extraction unit for extraction on both sides with work area enclosure - Manual spray guns - Electric hand wheel - Tool probe system TT 130, brand: Heidenhain There is no guarantee for correctness and completeness of the technical details and accessories. - Subject to prior sale - Detailed technical data sheet and information on equipment available on request.

Condition: good (used), Year of construction: 1999, For sale is a horizontal machining center from Axa of the Vario type with 2 milling tables. The machine is in good condition and has done little "heavy machining" (was mainly used for drilling and thread cutting). Technical data: Year of manufacture 1999 Control: Heidenhain TNC 410 M digital Table dimensions 2030 mm *500 mm Maximum table load (evenly distributed) 800 kg Min. speed 30 1/min Max. speed 10.000 1/min Drill length on X-axis (mechanical feed) 1760 mm Drill length on Y-axis (mechanical feed) 500 mm Drill length Z-axis (mechanical feed) 620 mm Machine dimensions: Height: 3900 mm Length: 2900 mm Width: 3000 mm Weight: 9 tons SCOPE OF DELIVERY/EQUIPMENT 1 spindle version SK 40 DIN 69 871 A 1 switch cabinet (integrated in the rear of the machine) Ball screws: Made by Deutsche Star Central lubrication unit: Bielomatik Hydraulic unit: Hydac RTA 2-300 MK-3 tailstock manually operated Electric handwheel HR 410 Scraper belt conveyor discharge side right Measuring probe TS 630 Hfjdpfx Adstt Abmewob WORKPIECE HOLDERS NOT INCLUDED IN THE OFFER Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: ready for operation (used), Year of construction: 2012, General Data Measurements width 4460 mm Measurements depth 2250 mm Measurements height 3550 mm Machine weight 12000 kg Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Number of axis 5 Movement X-Axis Movement 750 mm X-Axis Rapid Traverse 25 m/min Y-Axis Movement 500 mm Y-Axis Rapid Traverse 25 m/min Z-Axis Movement 600 mm Z-Axis Rapid Traverse 20 m/min Hfsdpfox D Ivrjx Adwjb Additional Equipment Incl. swivel/rotary table SRTA 2-300 for 5-axis machining This 5-axis AXA DBZ vertical machining center was manufactured in 2012. It features a Heidenhain iTNC 530 system, a spindle speed of 10,000 rpm, and a tool magazine with 22 positions. The machine includes a swivel/rotary table SRTA 2-300 for 5-axis machining. Consider the opportunity to buy this AXA DBZ vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine Multi-spindle drilling machine -System without control -1x Spindle machining units Hjdpfxjb A I Dxs Adwsfb -2x sleds -Max. feed stroke: 110 mm -Speed: 1400 rpm -Built-in collet: 6 mm -Weight: 350 kg

Condition: new, Year of construction: 2024, Electro hydraulic press 110 Ton Made in Italy The P110 MR is equipped with: 400 V 50-60 Hz immersed motor control unit. Pump for fast approach and return in 20 bar calibration. Adjustable pressure pump with handwheel to obtain the required power. Pressure relief valve with mechanical block to prevent overpressure. Pressure gauge (standard) that allows to calibrate with extreme precision the delivered power. The P110 MR is the only hydraulic press consisting of 2 laser-cut FE 510 monolithic structure uprights. without welding in the places of greatest stress This feature gives it extraordinary robustness. It is non-deformable and guarantees tight working tolerances. The P110 MR is equipped with a 30-litre tank and has a rapid descent speed of 1,400 mm/min. Weight : kg 1,100 Max pressure : bar 350 Max. flow rate : t. 110 Rapid flow rate :l/min 34 Slow flow rate : l/min 5 Inside shoulders : mm 1004 Rapid rod feed : mm/min 1.400 Slow rod feed : mm/min : 130 Voltage : V 400 Frequency :Hz 50-60 Power : kW 3 Max. absorbed current : A 7,3 Cylinder stroke : mm 300 Cylinder diameter : mm 200 Stem diameter : mm 110 Piston descent speed : mm/sec 23 Hfedpfx Adsfh R N Dowjb Tank capacity : litres 30

Condition: used, Year of construction: 2006, travel -x axis 1.760 / 2x 630 mm travel -y axis 600 mm travel -z axis 800 mm control HEIDENHAIN - iTNC 530 Hsdpox H Am Tefx Adwefb milling head -swivable ° numbers of positions in the tool changer 22 tool taper SK 40 turning speed range 30 - 10.000 U/min table surface area 2.380 x 600 mm Milling Machine - Vertical | AXA - VHC 2-1760 S equipped with a tool changer, chip conveyor, coolant system, high-pressure coolant, and internal coolant supply (ITC). Additional information: - 1 swivel head ° to °: 1° increment The machine only has 10.500h spindle hours. The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. The machine video from the production plant will be shared on request. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VHC2-1760S | VHC 2 1760 S | VHC-2-1760-S | VHC2-1760 | VHC1760S

Condition: used, Year of construction: 2003, Universal CNC machining centre Manufacturer: AXA Model: VPC 40 U Year of manufacture: 2003 CNC control: Heidenhain TNC 430 Travel (X/Y/Z): 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Hjdpfewwt Nmex Adwjfb Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60 stations Spindle speed: 10,000 rpm Weight: approx. 20 t.

Condition: used, Year of construction: 1999, operating hours: 19,500 h, functionality: fully functional, machine/vehicle number: 85525, travel distance X-axis: 1,760 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total width: 2,900 mm, total height: 3,100 mm, total length: 3,800 mm, table length: 2,030 mm, table width: 500 mm, table load: 900 kg, tank capacity: 290 l, tool length: 250 mm, tool diameter: 180 mm, Equipment: documentation/manual, rotational speed infinitely variable, 4 axes 36 tool stations SK40 Pendulum operation with partition wall 2x swiveling bridges Coolant tank 290 l with belt filter Control unit Heidenhain TNC 410 MA Hfedjxup Iqepfx Adwjb A-drive RTA 200/300

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 18000 kg Measurements height 3150 mm Control Unit Brand SIEMENS Model 840D Dimensions Machine Length 6200 mm Table Table load 500 kg Main Drive Number of axis 5 Hedpfx Ajx Nr R Tjdwofb Spindle Speed 9000 RPM Spindle motor power 56 kW Movement X-Axis Movement 1700 mm Z-Axis Movement 850 mm Y-Axis Movement 600 mm This 5-axis AXA MILLTURN VHC 2-1760 XTS 50/D was manufactured in 2013. It features a Siemens 840D CNC, with travels of 1760 x 600 x 850 mm and a CNC table diameter of 600 mm. The machine supports a maximum load of 500 kg and includes a center coolant system, workpiece and tool probes, spindle cooling, and tool holders. If you are looking to get high-quality milling and turning capabilities, consider the AXA MILLTURN VHC 2-1760 XTS 50/D machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2006, operating hours: 51,929 h, functionality: fully functional, machine/vehicle number: 86684, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 950 mm, controller model: Siemens 840d + Shopmill, total height: 3,210 mm, total length: 10,000 mm, total width: 4,500 mm, rotational speed (max.): 8,000 rpm, Equipment: chip conveyor, documentation/manual, with cross slide, SK 50, machine has a swivel head, plus Rotary table d= 800mm, traveling column and headstock made of high-quality machine casting, direct measuring systems in the basic axes X/Y/Z, power: 75 KWA, control voltage: 24 V, frequency: 50 Hz, back-up fuse: 16 A maximum, circuit diagram:86684, including: Rotary table, adaptive, diameter 800 mm, coolant pump: with 4 x Grundfos motors, and 1 x Walther Flender motor, extraction unit: type: ESB 300/38.1 with 37 kW, serial number: 6861-001 and Flender motor, cooling system from Rittal, tool magazine with 78 places Hfodpfx Adsw A Hntoweb Dismantling by the buyer, on-site support for loading, inspection recommended.

Condition: new, AUTOMATIC DOUBLE SPEED MOTORIZED HYDRAULIC PRESS WITH RAPID POWER 20 TON Max capacity TON 20 Approach speed (in rapid) mm/min 1700 Working speed (in slow) mm/min 440 Cylinder rod stroke mm 300 Hfodpfxsrvz A Ss Adwsb Cylinder rod diameter mm 45 Shank diameter mm M14 Tank capacity liters 30 Max pressure bar 350 Voltage V 400 Frequency Hz 50-60 Motor Power kW 1.5 Max absorbed current A 3.8 Weight Kg 200

Condition: like new (used), Year of construction: 2018, Manufacturer: AXA Type: VCC50 Year of manufacture: 2018 read operating hours (h): 6,332, Serial no.: 87844, X travel: 1,350 mm Y travel: 750 mm Z-travel: 850 mm distance table - spindle nose: 180 - 1.030 mm B-axis additional C-axis (conversion to A-axis theoretically possible), rapid traverse (X/Y/Z): 25/25/20 m/min surface of clamping table: 2.050x850 mm max. table load: 800 kg/m² 5 tN tool changer 22-fold tool holder SK 50 max. tool length: 400 mm max. tool weight: 15 kg max. feed force: 9.000 N main spindle: 6.000 rpm spindle arrangement: vertical control SIEMENS 840 D SL full protection cabin with sliding door swivel spindle Chip conveyor NC rotary table RTA4S-630 2 clamping jaws Paper belt filter system oil mist extraction electr. handwheel machine weight: 17.500 kg machine dimensions: 2.600 x 2.400 x 3.100 mm Hfedpoh Eg Ebjfx Adwsb

Condition: used, Year of construction: 2003, Technical details: x-travel: 2300 mm y-travel: 1200 mm z-travel: 600 mm turning speeds: 30-10.000 1/min max. torque on the spindle: 254 / 159 Nm control: HEIDENHAIN TNC 430 tool taper: SK 40 tool change unit: 60 Pos. spindle: 40 / 25 kW fixed working table:surface area: 1.100 x 1.100 mm rotary table: 1.100 x 1.100 mm rapid traverse: 30 m/min total power requirement: 69 kVA weight of the machine ca.: 20 t universal machining center with indexing head (2,5°), NC-rotary table, max. table load 1.500kg, internal coolant supply 30 bar, paper filter, Hfodpfewltwmex Adweb el. handwheel, chipconveyor, automatic doors, flush gun, no touch probe available, approx. 81.400 h main swich on approx. 72.200 h control on approx. 26.700 h program running on machine under power , for functional testing *

Condition: used, Year of construction: 1993, operating hours: 23,927 h, functionality: fully functional, machine/vehicle number: 85280, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,350 mm, travel distance Z-axis: 350 mm, overall weight: 23,000 kg, spindle mount: MK 4, Control: Siemens Sinumerik with magnetic clamping table, dimensions 4,000x1,500 mm, due to insolvency. Can be inspected under power. Hsdpoxk U T Rofx Adwefb

Year of construction: 2003, condition: excellent (used), Working travels 6000x1000x1200mm B-Axis milling head +/-90° Table size 6400x1000mm Spindle taper HSK-100 Spindle speeds -9000 rpm Tool changer 80 pos. Control SIEMENS 840D Hfjded Rz Uvjpfx Adweb Coolant through spindle Tool measuring device Zero point clamping system 3R MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2012, AXA DBZ 2/50 double station machining center, Year of construction 2012, Siemens 840 control system, Travel X/Y/Z 2x800/600/600 mm, 16-position tool changer, SK 50 tool holder, Spindle speed up to 4,000 rpm, Hfsdpfxeridf Uj Adwob Milling spindle - water-cooled hollow shaft motor, dir. Measuring systems, chip conveyor, heat exchanger, switch cabinet, oil mist lubrication, Rittal cooling system,

Condition: new, Year of construction: 2025, functionality: fully functional, The P50MR motorized hydraulic press guarantees high performance and maximum execution precision thanks to the robust structure entirely cut by laser without welding in the points of greatest stress. They are equipped with a 400 [V] 50-60 [Hz] submersible motor control unit, a fast approach and return pump calibrated to 20 [bar] plus an adjustable pressure pump with handwheel to obtain the required power. Hfjdofvhqgepfx Adwjb They are also equipped with a pressure relief valve with mechanical block to prevent overpressure and the pressure gauge (standard) allows to calibrate with extreme precision the power delivered. Power Ton 50 Inside light shoulders mm 800 Approach speed mm/min 1800 Working speed mm/min 350 Rapid flow rate l/min 26 Flow rate in slow l/min 5 Cylinder stroke mm 300 Cylinder bore mm 135 Stem diameter mm 70 Shank diameter mm M30 Tank capacity 50 litres Max. pressure bar 350 Voltage V400 Frequency Hz 50-60 Engine power kW 3 Max. current consumption A 5.5 Weight kg 500 Dimensions 1550 x 800 x 1965 (h)

Year of construction: 2023, condition: new, AXA MOVING CYLINDER ELECTRO-HYDRAULIC PRESS. 150-ton power. Automatic double speed with rapid. Moving cylinder stroke 816 mm transverse. Internal clearance from shoulder to shoulder mm 1500 Rod stroke mm 300 GALTECH distributors. - 2MP block. Hodpfxslruhde Adwsfb - No. 2 VIVOIL external gear unidirectional pumps. One for rapid approach and return (calibrated at 20 bar) and one with adjustable pressure with handwheel to set the required power. - Pressure relief valve with mechanical lock to prevent overpressure. - Standard pressure gauge to display power output. - INTECH electrical panel certified according to current regulations and with independent CE marking.