IK Industry International GmbH & Co. KG

Condition: used, Year of construction: 2007, operating hours: 14,500 h, machine/vehicle number: IntNr231533, Haas VF-3 (2007) – 3-Axis Vertical Machining Center Operating hours: approx. 14,500 Power-on hours: approx. 33,000 Machine type: CNC Vertical Machining Center Year of manufacture: 2007 Control: Haas Iisdpfx Aoy Rfu Isf Tob Drive type: High-speed spindle (High Efficiency) Axis configuration: 3-axis machining Technical Data Travel distances: X-axis: 1,010 mm Y-axis: 660 mm Z-axis: 608 mm Spindle speed: up to 10,000 rpm Axis Drives X/Y/Z axes: Ball screws, precision linear guides 3rd axis: Integrated tilting/rotary table, CNC controlled Tool Changer Capacity: 40 tool stations Taper: SK40 Spindle gearbox replaced in 2024 Equipment Chip conveyor Installation dimensions: approx. 3,870 x 2,510 x 2,690 mm (W x D x H) Machine weight: approx. 6,260 kg Condition The machine is fully functional both electrically and mechanically. Technical documentation included. The machine can be inspected under power by appointment. All technical data and details are subject to change and prior sale. Errors and omissions excepted.

Condition: used, Year of construction: 2018, machine/vehicle number: IntNr231575, A highly attractive MAZAK VCN-530C CNC vertical machining centre, manufactured in 2018 and equipped with the advanced MAZATROL SmoothG control system, is available for sale. Technical specifications: - Number of axes: 3 axes - X-axis travel: 1,050 mm - Y-axis travel: 530 mm - Z-axis travel: 510 mm - Table size: 1,300 x 550 mm - Maximum table load: 1,200 kg - Spindle interface: BT 40 / SK 40, depending on configuration - Spindle speed: typically 12,000 rpm - Tool magazine capacity: 30 tools - Maximum tool weight: approx. 8 kg - Maximum tool diameter: approx. 80 mm - Maximum tool length: approx. 350 mm - Rapid traverse (X/Y/Z): 42 m/min - Machine weight: approx. 6,800 kg - Coolant system: - Through-spindle coolant (IKZ) - Chip conveyor - 4th axis / rotary table / KITAGAWA Iedpfx Afey N Trxo Teib The machine can be inspected under power by appointment. Technical data and details are subject to change and prior sale.

Condition: new, Year of construction: 2024, X-axis 4,400 mm Y-axis 1,600 mm Z-axis 900 mm Spindle speed 2,000 - 24,000 rpm Drive power 14 kW Tool holder HSK 63 Tool changer 12 positions Control SIEMENS SINUMERIK ONE Iisdpey Ix Upjfx Af Tsb The machine has never been assembled and is immediately available.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,120 h, functionality: fully functional, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 655 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, torque: 12 Nm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Axis Travel Ranges X-AXIS (longitudinal): 7,800 mm Y-AXIS (lateral): 1,100 mm Z-AXIS (vertical): 655 mm B-AXIS (vertical-horizontal rotation of the machining head): 0° ÷ 90° C-AXIS (vertical rotation of the machining head): 0° ÷ 360° Traverse Speeds X-AXIS: 75 m/min Y-AXIS: 60 m/min Z-AXIS: 40 m/min B-AXIS: 3,240 °/min C-AXIS: 3,600 °/min Axis Acceleration X-AXIS: 3 m/sec² Y-AXIS: 3 m/sec² Z-AXIS: 2 m/sec² Motor Spindle Max. power in S1: 15 kW Max. speed: 24,000 rpm Iiodpfxoy Iqr Te Af Teb Max. torque: 12 Nm Tool holder: HSK – 63F Spindle encoder for rigid tapping Water cooling with cooling unit Automatic Tool Changer Standard for 16 tools Maximum permissible tool size in standard magazine: Ø = 80 mm L = 300 mm Maximum permissible saw blade size in standard magazine: Ø = 180 mm L = 150 mm Saw blade magazine for max. saw blade Ø = 500 mm L = 73 mm Processable Profile Sides With tool without angle head (profile top, profile sides, end faces): 5 With saw blade, Ø = 500 mm (profile top, profile sides, end faces): 1 + 2 + 2 Thread Cutting Performance (with tap on aluminium and through hole) Rigid tapping: M12 Larger threads possible with thread milling cutter Profile Feeding 2 reference stops with fixed positions Functions Dynamic pendulum mode Processing of overlengths up to max. double the machine length (X axis) Cutting and separating of the bar (not with 2-bar parallel operation) Automatic operation: milling and cutting (not with 2-bar parallel operation) Workpiece Clamping Standard equipment pneumatic clamping elements: Versions dynamic and static 7,800/6 Max. number of pneumatic clamping elements: 12 6 clamps per zone, movable along the entire machine range Max. profile width, Y, with standard tool clamping: 550 mm Motorized clamping device Absolute measurement of clamp position Safety Devices and Protective Equipment Light curtain system for workspace access protection 3-sided metal safety fence Full machine enclosure by accident and sound protection cabin Internal lighting Protective cover made of laminated safety glass Machine Structure Monoblock machine frame made of electro-welded and normalized steel Chip conveyor with steel belt on the right side of the machine Machining Unit Portal construction Motor spindle controlled on 5 axes, simultaneous interpolation possible Minimal quantity lubrication system (oil) Central lubrication system for guides Operation and Control Control cabinet with cooling unit Pneumatic control cabinet CNC with real-time control MG-Pilot Industrial PC with touch screen Atom 1600 processor 15” graphic LCD-TFT color display Keyboard, mouse 1 Gbyte RAM 4 Gbyte Compact Flash card 4 USB ports RJ45 network card Software Microsoft® Windows® Embedded Bidi-CAM DRILL Power Supply (Voltage/Phases/Hertz) 400V/3PH/50Hz Software for Machining Center Control CAMPLUS for SATELLITE XT, graphical programming software for machining with 3D visualization SHAPE, software for creating any freeform machining contours

Condition: used, Year of construction: 2022, machine/vehicle number: 246/22, feed length X-axis: 2,000 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, rotational speed (max.): 18,000 rpm, overall weight: 5,000 kg, Designation: Fanum TRIO SP 2W30 Weight: approx. 5,000 kg Number of spindles: 2 Axes: X-axis (width): 2,000 mm Y-axis (length): 300 mm Z-axis: 300 mm Spindle data Iisdpfxsy H I Tlj Af Tob Spindle type: ES789 Spindle power (S1/S6): 15 / 18 kW Max. speed: 18,000 rpm Spindle interface: HSK A63 Tool holder: ER32 / ER40

Condition: used, Year of construction: 2011, Pallet: 500 x 500 mm X: 730 mm Y: 730 mm Z: 740 mm Maximum detail size: Ø 800 x 1000 mm Max load capacity: 700 kg Spindle speed: 12 000 r/min - High-torque Spindle effect: 22/30 kW , 300 Nm (AC40HP) CAT 40 Tool changer: 40 positions Interface for coolant system Prepare for probe OMP60 Cromar conveyor Synchronised tapping G00 slope constant EIA EIA 3D COMP Scaling included loading of machine included tools and cubes Mazak HC Nexus 5000-II: LxWxH: 475 x 238 x 285 cm Pallet: 500 x 500 mm X: 730 mm Iodpfxoy H Dnxj Af Teib Y: 730 mm Z: 740 mm Max load capacity: 700 kg Tool changer: 40 positions

Condition: used, Year of construction: 2001, machine/vehicle number: IntNr231491, Manufacturer: DECKEL MAHO, Model: DMF 220 linear, Year of manufacture: 2001 Control system: Siemens 840D Powerline Travel and Axes X-axis (longitudinal): 2,200 mm Y-axis (transverse): 560 mm Z-axis (vertical): 720 mm Rapid traverse X/Y/Z: 50 m/min X-axis drive: High-dynamic linear drive Work Table Clamping surface: 2,600 x 600 mm Max. table load: 2,200 kg Main Spindle Speed range: 20 - 12,000 rpm (standard) Drive power (100% duty cycle): 35 / 25 kW (S1/S6) Max. torque: 130 / 87 Nm (at 100% duty cycle) Tool holder: SK 40 according to DIN 69871 Tool Changer Number of stations: 30-position magazine Tool change time (chip-to-chip): approx. 4-6 seconds (depending on model) Dimensions & Weight Space requirement approx.: 6,500 x 3,500 mm Machine weight approx.: 12.5 t The machine can be inspected under power by appointment. Technical data and specifications subject to change and error; prior sale reserved! Refurbished 5-axis CNC machining center Deckel MAHO DMF 250 linear in good condition. Year of manufacture: 2004. Control: Heidenhain iTNC 530. Technical data: X travel: 2,500 mm. Y travel: 920 mm. Z travel: 820 mm. B-axis: x/- 105° Worktable: 3,100 x 900 mm Spindle interface: HSK 63 Spindle speeds: 20 - 18,000 rpm Tool changer: 30 positions Iijdpfx Afoy Htq Ae Tob Equipped with: - Chip conveyor - Through-spindle coolant 40 bar - Operating manual Country of origin: Germany Motor power: 35 kW Machine dimensions (LxWxH): 6,000 x 3,800 x 2,950 mm Machine weight: 25,000 kg The machine can be viewed by appointment. Technical data and specifications subject to change and error, as well as prior sale!

Condition: used, machine/vehicle number: IntNr231520, A used 5-axis CNC machining centre, CHIRON FZ 08 S, year of manufacture 1998, is available for sale. Technical data: Machine type: 5-axis CNC machining centre / vertical machining centre (BAZ) CNC control: FANUC 21i-M, depending on configuration Travels: X-axis: approx. 300–350 mm Y-axis: 250 mm Z-axis: 250 mm A-axis: 360° (applies to 5-axis / rotary axis configurations) B-axis / swivel axis: -20° / +110° Table size / clamping area: 550 x 300 mm Max. workpiece weight: approx. 50 kg, specified in some market listings Tool magazine: 12 tools Spindle interface: HSK-A 40 Spindle speed: up to 10,000 (15,000) rpm Spindle motor power: 3.7 kW Machine weight: 1,820 kg Dimensions (L x W x H): 2,050 x 2,250 x 1,900 mm The machine can be inspected under power by prior arrangement. Technical data may be subject to change and error; prior sale reserved! Iedpjy Eid Nofx Af Tsib

Condition: used, Year of construction: 2004, Makino A66E with Fastems 10 pallet system built in container. Length of the working table 500.4 mm Iisdoy D Sirspfx Af Tob Width of the working table 500.4 mm Maximum table load 700 kg Antalet verktyg i magasinet 136 st Maximum spindle speed 14000 rpm Travel length X-axis (mechanical feed) 729 mm Travel length Y-axis (mechanical feed) 729 mm Travel length Z-axis (mechanical feed) 797.6 mm Maximum feed rate in X-axis 1250.1 mm/s Maximum feed rate in Y-axis 1250.1 mm/s Maximum feed rate in Z-axis 1250.1 mm/s

Condition: used, Year of construction: 2021, operating hours: 8,350 h, machine/vehicle number: 323618, 4 axes, travel paths (x/y/z): 560/640/640 mm, weight: 10,200 kg, power: 71.7 kVA, 40-position tool changer, 2-position pallet changer, internal coolant supply, SK-40 tool holder, chip conveyor, !!!Pick-up: 21st+26th May 2026!!! Iiedjyztd Sopfx Af Tob

Condition: used, Year of construction: 2015, machine/vehicle number: 152121150, Travel paths X/Y/Z axis approx. 750/500/500 mm, BT 40 spindle taper, power: 12 kW, equipped with SIEMENS control, Sinumerik 828D, integrated tool changer, integrated chip conveyor, T-slot clamping table approx. 80x45 cm Iodpfxjyztdxs Af Teib

Condition: used, Year of construction: 2006, machine/vehicle number: 185631, Travel paths (x/y/z): 560/630/600 mm, tool holder SK 40, power: 64.6 kVA, weight: 9,900 kg, 32-position tool changer, pallet changer, chip conveyor, MAZAK MAZATROL 640M control, !!!Collection: 27th & 28th May 2026!!! Iiedpfoyztfcsx Af Tjb

Condition: used, Year of construction: 2016, operating hours: 24,872 h, machine/vehicle number: 274448, 5 axes, travel paths (x/y/z): 350/550/510 mm, weight: 6,900 kg, power: 34.7 kVA, chip conveyor, 30-position tool changer, SK 40 tool holder, internal coolant supply, rotary table Ø: approx. 50 cm, error message after restart: data loss, 1 tool cabinet with 7 drawers, with accessories, !!!Collection: 10th+11th June 2026!!! Iiedoyztfpspfx Af Tjb

Condition: used, Year of construction: 2018, operating hours: 15,847 h, machine/vehicle number: 293044, 5 axes, travel (x/y/z): 850/550/510 mm, power: 34.5 kVA, spindle speed: 12,000 rpm, weight: 11,000 kg, 30-position tool changer, internal coolant supply, tool holder SK 40, chip conveyor, rotary table Ø: approx. 60 cm, 1 tool cabinet with 7 drawers, with accessories, 1 stool, !!!Collection: 10th + 11th June 2026!!! Ijdsyztfvopfx Af Tsib

Condition: used, Year of construction: 2014, operating hours: 29,759 h, machine/vehicle number: 62141109, 24-position tool changer, travel distances X/Y/Z: 2,000/1,300/1,850 mm, spindle speed: 4,000 rpm, with magnetic clamping plate approx. 2,000x800 mm, chip conveyor, cooling unit, 1 HEIDENHAIN TT 460 reference probe, tool holder: SK50, footprint: 700x550 cm, without machining tools. The operating materials are included in the auction and must be taken by the buyer or properly disposed of. Iiodeyztgmepfx Af Tjb

Condition: used, Year of construction: 2005, operating hours: 41,059 h, machine/vehicle number: 12831, with 30 tool changers, spindle speed: 5,000 rpm, travel paths: X/Y/Z: 2,500/1,000/770 mm, control: HEIDENHAIN iTNC530, 1 chip conveyor, 1 coolant/lubricant filtration system, operator display, magnetic clamping plate approx. 2,000x800 mm, 2-piece, weight: 21,000 kg, without machining tools, according to information: inverter for Z-axis out of order. Operating fluids are included in the auction lot and must be taken by the buyer or disposed of properly. Iiedpfx Asyztgtef Tjb

Condition: used, Year of construction: 2005, operating hours: 50,472 h, machine/vehicle number: 12332, Magnetic clamping plate approx. 1,200x600 mm, spindle speed: 8,000 rpm, travel paths X/Y/Z: 2 mm, control: HEIDENHAIN iTNC530, chip conveyor, operator terminal, coolant/lubricant belt filtration system, weight: 10,500 kg, without the hydraulic vise shown, without machining tools. Operating materials are included in the auction scope and must be taken or properly disposed of by the buyer. Iodpfx Afeyztgyj Tjib

Condition: used, Year of construction: 2000, functionality: unexamined, machine/vehicle number: 50953, CNC horizontal machining center with accessories Ijdpfjyxmdaex Af Toib

Condition: used, Year of construction: 2022, Working length: up to 7,000 mm Mode: single continuous working area Axes: 4 controlled CNC axes Tool rotation: from 0° to 180° Spindle power: 5 kW (S1) Tool magazine: 8 automatic tools Ijdpfx Afjywhuqo Toib Clamping: pneumatic clamps (compact design to allow maximum workability even with short parts) Structure: closed cabin (safety and soundproofing) Power supply: 400 V Frequency: 50 Hz Installed power: approx. 8 kW Compressed air: 7 bar Machine weight: approx. 3500–3600 kg X-axis speed: up to approx. 90 m/min Operations: milling | drilling | tapping | end machining Materials: aluminium | PVC | light alloys | light steel (up to approx. 2 mm)

Condition: used, Year of construction: 1993, functionality: fully functional, travel distance X-axis: 8,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 700 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, torque: 1,330 Nm, controller manufacturer: Siemens, controller model: Siemens 840D, total height: 5,800 mm, total length: 14,000 mm, total width: 4,000 mm, table width: 2,000 mm, table height: 250 mm, table length: 2,000 mm, table load: 20,000 kg, rotational speed (min.): 2 rpm, rotational speed (max.): 2,500 rpm, overall weight: 40,000 kg, spindle speed (min.): 2 rpm, spindle speed (max.): 2,500 rpm, spindle motor power: 36,000 W, number of slots in tool magazine: 60, input voltage: 380 V, type of input current: AC, Equipment: documentation/manual, rotational speed infinitely variable, The Lazzati HB130 is a heavy-duty CNC horizontal boring and milling machine from the Italian manufacturer Lazzati. Machines of this series are primarily used in large-scale machinery construction, turbine production, energy plant engineering, as well as in tool and mold making. This machine is designed for machining large and heavy workpieces, allowing for precise drilling, milling, and tapping operations on massive steel or cast components. It features a particularly robust construction with hydrostatic guides, ensuring high rigidity and accuracy during heavy-duty machining tasks. Spindle taper DIN69871 ISO 50 Milling spindle taper ISO 60 Iisdpfx Afeytrm Is Tsb The listed price is exclusive of dismantling, packaging, and shipping. Sale ex location; subject to prior sale. Machines are sold as used; any warranty or guarantee is excluded.

Condition: ready for operation (used), Year of construction: 2001, controller manufacturer: SIEMENS, controller model: 840, overall weight: 11,500 kg, number of axes: 5, This 5-axis Gleason PFAUTER G320 CNC + Promot Automation was manufactured in 2001. It features a Siemens 840 control unit, a maximum workpiece diameter of 380 mm, and a module range of 0.5-7.0. The system includes Promot Automation handling, a robotics system, and a cooling belt system. If you are looking to get high-quality gear grinding capabilities consider the Gleason PFAUTER G320 CNC machine we have for sale. Contact us for more information about this machine. • Operator panel: included Iisdpfx Afsyf E R Ds Teb • Module range: 0.5–7.0 • Workpiece diameter: min 10 mm, max 380 mm • Number of teeth: 10–600 • Axis travels: Z (vertical) 200 mm; X (horizontal) 230 mm; Y (tangential/shift) 135 mm • Clamping head swivel (A): ±45° • Tailstock stroke: 125 mm • Dressing travels: V (tangential) 180 mm; U (radial) 110 mm • Grinding wheel speed: up to 3000 rpm, stepless • Linear axis speed: 10,000 mm/min • Max. table rotation speed: 240 rpm • Table resolution: 0.001° • Feeds: machining and working feeds stepless • Grinding wheel dimensions: diameter 270–350 mm; width up to 104 mm; bore 160 mm • System weight: approx. 11,500 kg • Space required (machine): approx. 3.7 m × 2.4 m × 2.75 m Additional equipment • Promot Automation handling unit (robotics handling) • Operator panel/handheld (for automation) • Conveyor belt • Cooling belt system • Hydraulic unit • Space required (automation): approx. 4.5 m × 1.6 m × 4.0 m • Accessories as shown in photos

Condition: good (used), Year of construction: 1999, functionality: fully functional, Year of manufacture: 1999 Width: 1200 mm Iijdpfx Aox Uwtksf Tob Length: 1200 mm Number of axes: 5 Tool holder: SK50 Spindle speed (RPM): 3,500 Workable materials: Steel, aluminum, titanium, graphite, copper, invar, composite, Delrin, Peek

Condition: new, Year of construction: 2026, functionality: fully functional, spindle speed (max.): 36,000 rpm, spindle speed (min.): 12,000 rpm, High part output | 3D CNC milling for small workpieces up to 1000 x 800 x 400 mm. > Efficient milling spindle, short throughput times and high part output: Due to the highly efficient milling spindle, the 5-axis CNC machine creates a high part output. The CNC milling machine stands for absolutely fast production processes and short throughput times. In addition, the rotary table of the CNC milling machine performs the C-axis movement, making milling even more effective. > Little space required, fast commissioning: The RT-F 1400 CNC milling machine requires little space and can be commissioned within two days. Set-up times are minimal. The CNC machine can be easily moved to another location using a forklift. > First-class contour accuracy for 3D machining with fixtures: All components, such as milling tool, spindle and the machine are matched to each other and to the desired component. A fixture from HG GRIMME SysTech can additionally influence the milling quality. Existing fixtures can be reused at any time. > Use in industry and small businesses: The CNC rotary table milling machine RT-F 1400 is particularly suitable for 3D machining of smaller components (800x1000x400mm). The CNC milling machine is used just as successfully by large industrial companies, such as the automotive industry, as it is in small businesses. > Basic version of the CNC machining center - Protective cabin with automatic gate unit, pneumatic - Swiveling, integrated control panel - High-performance CNC control NUM Flexium+ with nPad and 19'' monitor - Tool changing system with 12 places, dust-tight - Tool measurement Renishaw-TS 27 R - chip tray, vacuum pump > 365 further equipment options - example CFK package The machine can be equipped with many further options. One example is the upgrade of the machine equipment for CFRP machining. The CFRP package takes into account many safety aspects that are necessary for the processing of composite material. We offer around 365 additional options across our entire product range and can further equip the basic machine offered at any time. > Suitable materials for the 5-axis CNC rotary table milling machine 1400: plastics, composites such as CFRP, model making materials, aluminum. Further technical data Cube dimensions component - 1000 x 800 x 400 mm (+162 mm substructure) Travels X/Y and Z - X/Y and Z: 1,040 x 1,400 mm x 725 mm Travels of rotary axes A and C - Rotary axis C (table) ± 1,080°. - Swivel axis A, standard tool spindle with tool changing system ± 110°. Speeds - Rapid traverse linear axes X/Y/Z 40/40/30 m/min - Rapid traverse rotary axes A/C 14,000°/18,000° m/min Accuracies - Positioning accuracy ± 0.040 mm - Repeat accuracy ± 0.035 mm Iiodpfx Afsx S Etmj Teb Machine rotary table - ø 800 mm Table load - approx. 200 kg Milling spindle - High-frequency milling spindle 9 kW (S6) - High frequency milling spindle 8 kW (S1) - speed 36.000 rpm - Tool holder HSK 40 E Machine weight - approx. 3000 kg Already included special equipment - Head suction for floating dust and chips - Interior with perforated footboards - interior lighting - Ethernet and remote maintenance - 3D spline - Connection T-Box (nPad) (subject to change without notice)

Condition: good (used), Year of construction: 2013, operating hours: 37,297 h, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 2,300 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, controller manufacturer: Siemens, controller model: 840D sl, table width: 1,500 mm, table height: 30 mm, table length: 2,000 mm, table load: 2,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 12,486 h, spindle motor power: 24 W, number of slots in tool magazine: 21, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an EiMa CNC-controlled 5-axis machining center, type Sigma M, with a fixed portal and moving table, designed for the precise machining of aluminum and finishing of steel. The machine is engineered for high accuracy, rigidity, and large travel paths, making it ideal for demanding milling, drilling, and sawing operations in metal and aluminum profile applications. Year of manufacture: 2013 Power-on hours: approx. 37,297 h (as of November 2025) Spindle running time: approx. 12,486 h total (as of November 2025) AXIS TRAVEL & DYNAMICS: - X 3,400 mm · Y 2,300 mm · Z 1,000 mm - Feed rate: X/Y 60 m/min, Z 40 m/min STRUCTURE & TABLE: - Sturdy steel construction, precision linear guides, servo drives, automatic central lubrication - Moving table 2,000 × 1,500 mm, 30 mm thick, threaded grid 100 × 100 mm - Max. load capacity 2,000 kg Isdpfxox H Ib Ns Af Teib SPINDLE & TOOL CHANGER: - 24 kW HSK 63 A spindle up to 18,000 rpm, water-cooled - Disc-type tool changer with 20 positions + 1 pick-up position (for tools up to Ø 500 mm) 5-AXIS HEAD: - C3 fork head, swiveling ranges approx. C ±200°, A ±120°, high positioning accuracy MEASURING SYSTEMS: - m&h wireless probe (workpiece measurement) - BLUM laser (tool measurement) EQUIPMENT: - MMS system (internal & external lubrication) - Fully enclosed cabin, separate tool change chamber - Mist extraction system with electrostatic separator (approx. 1,900 m³/h) already integrated CONTROL: - Siemens 840D sl, 5-axis package, Advanced Surface, TCP - 15" control panel, remote maintenance prepared ACCURACY: - Repeatability approx. ±0.012 mm SPECIAL FEATURES: - Connected to power – demonstration possible at any time - Direct from production – no dealer sale - Complete technical documentation available - Support with dismantling, loading, and transport possible (at extra cost) HIGHLIGHT: - New spare spindle from Omlat included (approx. €25,000 value) NOTE: - Collection possible from January/February onwards All information has been provided to the best of our knowledge and belief. Subject to change, errors, and prior sale.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,000 h, controller manufacturer: SIEMENS, controller model: 840 D, spindle speed (max.): 12,000 rpm, It is a system composed by a HELLER MCH 350 and a HELLER MCH 350 featuring a 22 pallet system with 800x800 pallets. Both models include a 70 bar pressure system, with the MCH 350 reaching up to 12,000 RPM and the MCH 350 C up to 8,000 RPM. Consider the opportunity to buy this HELLER MCH 350 + MCH 350 C horizontal machining centre system. Contact us for more information about this system. Additional equipment • Pallets: 22 of size 800x800 Iiedpox D Skmefx Af Tsb Machine Benefits Technical Machine Benefits • Pressure: 70 bar on both machines • Tool systems: 2 x 234 hsc 100 • Mch 350 c = 8000 rpm Extra Information MCH 300 Usage: 29000 hours MCH 350 C Usage: 22105 hours