Used Milling machines - univ.NC/CNC 500-699mm X-axis travel for sale (120)

Condition: excellent (used), Working travels 400 x 210 x 340 mm Table size 600 x 400 mm Spindle taper ISO40 Spindle speeds 40-2000 rpm digital read-out Lhsdpfxjxpubrs Aa Isn Misc accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 S Year of manufacture: 1995 Operating hours: 65,071 Control: HEIDENHAIN TNC 426 Working area X/Y/Z: 600 x 450 x 500 mm Spindle speed range: 20 - 6,300 rpm Lsdpov Rxa Sofx Aa Ijhn Tool holder: SK 40 M & H 3D probe (for workpiece alignment) Vertical-horizontal milling device Quill Coolant system Angle table: 900 x 458 mm Weight: 4,000 kg Machine dimensions (LxWxH): approx. 3,900 x 2,000 x 2,000 mm 221025

Year of construction: 1994, condition: good (used), Macmon M400 CNC with Heidenhain TNC 355 control Manufacturer: Macmon Type: M400 CNC Control: Heidenhain TNC 355 Year of construction: 1994 Weight: 2700 kg Connected load: 12 kW Travel X: 630 mm Travel Y: 450 mm Travel Z: 380 mm clamping surface table: 800x500 mm spindle revolutions: 20-2780 rpm Steps: 2x continuous Spindle power: 5,5 kW tool holder: SK40/ISO40 Axle drive: 0-2000 mm/min Axis drive rapid traverse: 5000 mm/min Ledpfofmu E Asx Aa Ijhn quill stroke W: 100 mm Swivelling of the head: 2x90 Resolution measuring system: 0.001 mm positioning: +/- 0,02 mm Special features: protective housing to open, chip tray, quill stroke

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Lhedpfowuurwsx Aa Ien Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: used, Year of construction: 1970, functionality: unexamined, MAHO - Universal swivel table Ljdsxqpfnepfx Aa Iohn

Condition: ready for operation (used), Year of construction: 1970, Immediately available from university: Universal milling machine with slotting head SHW Type UF 1 Year of manufacture: 1970 Retrofit: 2010 Table: 700 x 310 mm Travel X/Y/Z: 550/340/420 mm Taper: SK 40 Spindle speeds: 46 – 2,200 rpm Quill stroke: 80 mm Slotting stroke: 200 mm Lhjdpsxqbgwefx Aa Ijn Feed rates: 12 – 254 mm/min Weight: 2 tons SK 40 toolholders Hydraulic vise Price: EUR 2,500.— plus VAT ex location

Condition: like new (used), Year of construction: 2022, operating hours: 50 h, The machine has approximately 50 operating hours and is like new Technical Specifications Fixed angle table Clamping surface mm 315 x 710 T-slots: quantity / width x spacing mm 5 / 14 x 63 Max. workpiece weight kg 200 Max./Min. distance spindle nose to table mm 450 / 100 Vertical and horizontal spindle Tool holder SK 40 DIN 2080 Infinitely variable spindle speeds rpm 80 – 3,000 Main motor power kW 5.5 Torque S1 100% Nm 47.7 Vertical head Manual quill adjustment mm 80 Maximum swivel angle +/- 45° Travel paths X-axis mm Lsdowuv I Hspfx Aa Ishn 400 Y-axis mm 315 Z-axis mm 350 Feeds Control stepless Feed rate X / Y / Z mm/min 2,000 Rapid traverse X / Y / Z m/min 5 / 5 / 2.5 Digital display Heidenhain ND 5023 General data Weight kg approx. 1,700 Length mm 1,520 Width mm 2,130 Height mm 1,950 Color RAL 7035 / 7024 light gray / graphite gray Total connected load kW 7.5 Supply voltage V AC 3 x 400 Control voltage V DC 24 Frequency Hz 50

Condition: used, Year of construction: 1995, CNC Universal Milling Machine Manufacturer: HERMLE Model: UWF 902 H Year of manufacture: 1995 Lhedpsv Rpr Sefx Aa Ijn Operating hours: 46,680 Control: HEIDENHAIN TNC 426 Travel (X/Y/Z): 600 x 450 x 500 mm Angle table: 900 x 458 mm Renishaw 3D probe Spindle speed range: 20 to 6,300 rpm Tool holder: SK 40 Coolant tank Drive power: 8.6 kW Weight approx.: 4,500 kg Machine dimensions (LxWxH) approx.: 2,950 x 2,200 x 2,300 mm 221025

Year of construction: 1989, condition: good (used), Machine: Control Heidenhain TNC 355 Built in 1989 Travel: X 600 mm method path Y 450 mm process path Z 400 mm method Lodpfod I Uwmox Aa Ishn Spindle speed 20 – 4000 min-1 Angular size 850 x 440 mm Swivel cull 650 x 395 mm Electronic hand wheel The machine is still under power and is in good condition.

Condition: good (used), Year of construction: 2017, feed length X-axis: 550 mm, feed length Y-axis: 305 mm, feed length Z-axis: 460 mm, CNC x-axis 550 mm y-axis 305 mm z-axis 460 mm BT 40 tool holder 12-position tool changer Main spindle 4 kW up to 10,000 rpm with cooling system Chip conveyor Siemens Sinumerik 808 D control Lhedpfx Asxpqhzea Ion

Condition: good (used), Year of construction: 1991, functionality: fully functional, CNC milling machine HERMLE UWF 900 W year of construction 1991 Control: Heidenhain TNC 360 x-path: 600 mm Lsdpfoxhcu Dex Aa Ijhn y-path: 400 mm z-path: 420 mm Spindle holder ISO: SK 40 Vertical quill stroke: 75 mm Speed range: 20 ... 4000 rpm Spindle head swivels left and right: 90° left / right ° Feed rate:: X/Y/Z: 1...6000 mm/min. Feed rate:: X/Y: 7 m/min. + Z: 6 m/min. Table size: 900 x 460 mm Table load: 400 kg Total power requirement: 13 kW Machine dimensions approx. LxWxH: 4.0 x 3.8 x 2.0 m Weight approx.: 2300 kg Equipment: - Separate production cell - Coolant device - Control panel with swivel arm - SK 40 Heidenhain touch probe - handwheel

Condition: ready for operation (used), Year of construction: 1989, Available immediately from location: MAHO Toolroom Milling Machine Type MH 500 M Year of manufacture 1989 Heidenhain Digital Display Table 800 x 360 mm SK 40 Spindle speeds 63 – 4000 rpm Quill stroke 50 mm Travel X/Y/Z 500/380/350 mm Drive 3 kW Feed rates 10 – 1000 mm/min Coolant system Weight 1600 kg Lodpfx Aoxqbgkoa Ijhn Adapters Hydraulic vise Price: €3,000 plus VAT, ex location

Condition: excellent (used), Year of construction: 1999, Hermle UWF 802 M Hermle UWF 802 M with NC control HS, cycle-controlled, year of manufacture 1998, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Travel paths X: 500 mm, Y: 430 mm, Z: 400 mm Table size: 800 x 390 mm Spindle taper: ISO 40 Spindle speed: 71 to 3550 rpm, 18 steps Feed rate X and Y: 2 to 1600 mm/min, stepless Feed rate Z: 2 to 1000 mm/min, stepless Rapid traverse X and Y: 1.6 m/min Rapid traverse Z: 1 m/min Spindle drive: 3 kW Power connection: 400 Volt, 50 Hz - Spindle speed adjustable in 18 gear steps - Vertical milling head swivels to the right and left - Hydro-mechanical tool clamping vertical and horizontal - Automatic central lubrication - Separate coolant unit - Control cabinet fixed to the machine - Fixed angle table - Operating manual and wiring diagram Ljdpfowyn Rqox Aa Ijhn Required space (L x W x H): 2000 x 1800 x 1950 mm Weight: approx. 1750 kg Accessories and equipment: Operating manual, electrical diagrams Machine feet About the machine: We offer a Hermle UWF 802 M milling machine with NC control HS, cycle-controlled, year of manufacture 1998, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Hermle runs very quietly. This newer generation of milling machines is very user-friendly. Take this opportunity to view the machine under power on-site and see its condition for yourself.

Condition: good (used), Year of construction: 1999, Hermle UWF 1202 H, Lodpfxev Aa Uns Aa Ishn Year of manufacture 1999, Control Heidenhain TNC 426 PB, Travel X/Y/Z 850/630/500 mm, Horizontal spindle, 34-way tool changer, Sk 40 mount, Vertical spindle +/- 90°, Quill travel 85 mm, 3 gear stages, Spindle speed up to 5,000 rpm, X/Y/Z glass scales, Table size 1200 x 550 mm, Electrical handwheel,

Condition: good (used), Year of construction: 1983, Maho 700 C, year of manufacture 1983 Ljdpfxowya U Ue Aa Iehn Travel paths X/Y/Z: 700 mm/500 mm/450 mm Table dimensions X/Y: 900 mm/500 mm Spindle mount: ISO 40 Spindle speed: 3150 rpm Spindle stroke: 100 mm Weight: approx. 3500 kg Controller: Philips CNC 432

Condition: reconditioned (used), Year of construction: 2014, feed length X-axis: 650 mm, feed length Y-axis: 450 mm, feed length Z-axis: 450 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 55 rpm, quill stroke: 75 mm, quill diameter: 80 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 55 rpm, table load: 400 kg, overall weight: 2,500 kg, Equipment: rotational speed infinitely variable, ABENE VHF 360 with Heidenhain TNC 620 Travel paths: X 650 / Y 450 / Z 450 mm Quill stroke: 75 mm HR 410 rotary table Speed range up to 5,000 rpm Condition: Machine in good condition, partially overhauled by us. New axis and gearbox bearings Belt replaced Wear parts checked/replaced Lhjdpfx Aoxg Ic Dsa Ien Spindle bearings original, in good condition Special features: ✔ Immediately ready for operation ✔ Inspection and trial machining possible at any time

Condition: good (used), For sale: very well-maintained machine from a training workshop CNC Universal Milling Machine MAHO Type MH 400 E Machine No. 42544 Year of manufacture: 1989 Travel X: 400 mm, Y: 250 mm, Z: 375 mm Table size: 700 x 270 mm Distance spindle nose / table max.: 410 mm Tool holder: ISO 40 with drawbar Type B Spindle speed: 80 - 4000 rpm, 18 steps Lhjdpfx Asw A Ratja Isn Feed rate: 1-1500 mm/min, stepless Rapid traverse (X, Z, and Y): 2.5 m/min Vertical quill travel: 50 mm Spindle drive: 2.2 kW Power supply: 400 Volt, 50 Hz, 19 kVA - Swiveling control panel with CNC path control PHILIPS 432 - LCD monitor VISCOTECH - Hydro-mechanical tool clamping - Swing-out device for vertical milling head - Splash guard enclosure around the table with 3 folding doors - Electrical control cabinet fixed to the machine - V24 interface (RS 232) for data transfer - 52,470 operating hours, main switch on - Rigid angle table - Coolant system with coolant pump mounted next to the machine - Central lubrication system Vogel - Operator manual, electrical wiring diagram Kedbheh Ic Ufsh Nzgjlw Space requirements (L x W x H): 2250 x 1800 x 1850 mm Weight: approx. 1.5 tons Good condition

Condition: good (used), Complete specifications can be found in the photos of the listing. CNC HEIDENHAIN 426. The machine is in excellent mechanical condition. Lhedpfx Aexl Htfea Ien

Condition: good (used), Year of construction: 1988, Maho MH 600 E Tool Milling Machine Maho MH 600 E with Phillips 432 control, year of manufacture 1988. Completely overhauled by MMD in 2019; since then only sporadically used. Excellent CONDITION. The machine comes from the training workshop of a renowned German mechanical engineering company. Technical specifications: Year of manufacture: 1988 / 2019 Machine was overhauled by MMD in 2019 at a cost of nearly €40,000 and has only been sporadically used since then. Rigid angle table Travel X: 600 mm Travel Y: 400 mm Travel Z: 400 mm Spindle taper: ISO 40 Spindle speeds: 80 - 4,000 rpm Infinitely variable feed rate: 0.1 - 1,500 mm/min Rapid traverse: X and Y/Z 4/2.5 m/min Electrical connection: 380 V, 16 kVA Required space: 2,450 x 2,200 x 1,900 mm Weight: 2,250 kg About the machine: For sale is a Maho MH 600 E tool milling machine with Phillips 432 control system. This universal milling machine is in very good original condition. It comes from a facility where it was used exclusively for training purposes and therefore sees very little use. The control system is very user-friendly. In addition, the machine offers hydraulic clamping both vertically and horizontally. Conversion from vertical to horizontal operation is very straightforward by simply folding away the vertical head. The guideways are lubricated regularly via central lubrication. The Maho has been mechanically and electrically tested in our workshop. Take the opportunity to view and test the Maho under power at our facility. Lhodpfxsxqd A Ie Aa Isn You can find additional milling machines from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2002, Maho DMU 50 M Universal Milling Machine, year of manufacture 2002, Siemens control, travel X/Y/Z 500/400/400 mm, feed X/Y/Z up to 5 m/min, manual rotary-swivel table with display indication, rotary table size 700 x 500 mm, swivel range -10° / +95°, max. table load 200 kg, spindle speed up to 4,500 rpm, SK 40 spindle taper. Lhsdpoxm Srcofx Aa Ion

Condition: good (used), Year of construction: 1990, CNC milling machine, lid, FP4-AT, 3 axes X 560/Y500/Z450 speed range 40-4000 min-1 control Contur-3, SK-40 record, weight 3.4 tons. Lsdpfjdygdhox Aa Iohn

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 36194, feed length X-axis: 800 mm, feed length Y-axis: 400 mm, feed length Z-axis: 450 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 5,000 m/min, feed rate Z-axis: 2,000 m/min, spindle speed (max.): 5,000 rpm, spindle speed (min.): 55 rpm, quill stroke: 75 mm, quill diameter: 80 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 5,000 m/min, rapid traverse Z-axis: 2,000 m/min, table length: 1,530 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 5,000 rpm, Equipment: documentation/manual, rotational speed infinitely variable, Universal milling and drilling machine. X 800 mm Ledswf E R Eepfx Aa Ishn Y 400 mm Z 450 mm - Heidenhain TNC 620 with ABENE/HEIDENHAIN software for easy operation - 2-speed gearbox with frequency-controlled spindle motor from 55 to 5,000 rpm. - 1 LED machine light, 24 V/70 W - Electronic handwheel HR-510 for the X, Y, and Z axes - Complete electrical equipment for 400 V, 3-phase, 50 Hz. - Transformer for 24 V control voltage. - All fuses in the electrical cabinet are automatic. - Machine longitudinal, cross, and vertical feeds - AC motor spindle, 7.5 kW - Z-axis spindle, 40 mm diameter, ball screw. - Spindle for the X and Y axes, with backlash-free ball screw. Ø 32 mm. - All guideways are hardened and ground. - An automatic central lubrication system lubricates all guideways and ball screws. - AC servo motors with continuously variable control via Heidenhain TNC 620 - Extendable chip tray - Collision protection monitoring in all axes via electronic threshold monitoring - Keys, operating instructions, spare parts catalog, and acceptance report. - Mechanical handwheels in all axes (optional) - Table enclosure - Key switch for selecting between manual and automatic mode. We offer you a machine that is ideally suited for training and continuing education. Our machine is characterized by its robust construction and enables precise machining of workpieces. Thanks to its features, it is ideal for use in training workshops or professional development courses. The machine allows you to gain practical experience in CNC manufacturing and deepen your understanding of CNC technology. Our machine is located in our warehouse in Pfullingen and can be inspected at any time. We would also be happy to arrange a test run to demonstrate the machine's capabilities. You will quickly notice how easy and efficient our machine is to operate. We offer the machine at a fair price. Please contact us for further information or to request a quote. We are confident that our machine will meet your requirements and look forward to your inquiry.

Condition: used, machine/vehicle number: 186137200089, used TOS tool milling machine model FNG 40 CNC Year of manufacture: 1988 with Heidenhain path control TNC 155 with fixed angular table 800x400mm Travel paths: X/Y/Z = 500/400/400mm Speed range: 10-3150 rpm Spindle: SK40 Chip guard, attachable Lhsdpfx Aasxf Inks Ion Documentation for the machine and control is available. The machine is located in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Year of construction: 1988, condition: good (used), Tool milling machine make: INFRATIREA, type: FUS-32, year 1988 Technical data: table 950 x 450 mm Lodpfx Ajhaq T Tsa Ijhn travels X / Y / Z: 500 / 320 / 400 mm spindle speeds 25 - 2000 rpm with digital display

Condition: good (used), Travel xyz 400 x 300 x 370 mm Angled table inclinable 380 x 700 mm Ljdpfju T I D Tsx Aa Iehn Spindle holder SK 40 rpm 40 - 1.500 Horizontal and vertical spindle The machine was used very little.