UAB Baltec CNC Technologies

Condition: ready for operation (used), Year of construction: 1990, L & Z Lathe AFM TUG 40 Type TUG 40 Year of manufacture 1990 Center height 200 mm Diameter over slide 280 mm Turning length 1500 mm Drive power 5.5 kW Spindle speeds 18 - 1600 rpm Spindle bore 52 mm Chuck, Lynette, steel tool holder Multifix with inserts Price: Euro 2,250.00 plus VAT, ex works. Pjdpfx Aezw Dytebpora

Condition: excellent (used), Year of construction: 1998, Parallel Lathe WABECO D6000E Between points: 600 mm Maxi Ø on bench: 270 mm Prsdpfx Abszwdfpepja Maxi Ø over saddle: 170 mm Spindle speed: from 45 to 2300 RPM Multifix turret type A Concentric 3-jaws chuck Ø 100 mm (NEW) Year of construction: 1998 (machine very little used) Spindle speed by variator Tailstock CM2 Scale 2 axes EAE type Mikronel 220 L Supplied with one clamp tie rod Accessories: 5 tool holders + different thread wheels Voltage: 220 V mono Dimensions (L x W x H): 1500 x 900 x 1700 mm Weight: approx 200 kg

Condition: like new (used), Year of construction: 2012, Parallel Lathe JET PROMAC 941 V Between points: 500 mm Maxi Ø on bench: Ø 240 mm Maxi Ø over saddle: Ø 140 mm Spindle diameter: Ø 21 mm Spindle speed: from 100 to 1700 RPM Square turret Chuck: 3-jaws Ø 125 mm Year of construction: 2012 - Almost new Spindle motor: 1,3 kW Threadings: Metric + Whitworth Tailstock: CM2 Podszwdd Ejpfx Abpora Variable speed drive for the spindle Supplied with one 4-jaws chuck Ø 125 mm Supplied with the gears for threading Electronic tachometer Voltage: 220 V mono Dimensions (L x W x H): 1200 x 600 x 1400 mm Weight: approx 200 kg

Condition: ready for operation (used), DROOP & REIN SZ 100 / Keyway Milling Machine - Maximum machining diameter: 140 mm - Spindle bore: 40 mm - Keyway length in a single pass: 100 mm - Distance between chuck and tailstock center: 350 mm - 3 working speeds - Electric chuck guard - Good overall condition, ready for operation Pjdpfxszv Edqo Abpera Dimensions: L x W x H 0.9 x 0.6 x 1.5 meters / Weight: 300 kg Subject to errors and omissions.

Condition: used, Mechanic’s lathe EKS - WICO Kassel, type DL 350 Vintage lathe for exhibition Predpfx Abezvyvujpsa Machine no. DL 350/4/50, year of manufacture approx. 1930 Distance between centers 500 mm Swinging diameter over bed 240 mm Height of centers over bed 120 mm Swinging diameter over cross slide 160 mm Height of centers over cross slide 80 mm Spindle bore 16 mm Tailstock taper MK 2 Motor power 2.6 kW Mains connection 380 volts, 50 Hz - suitable as a restoration or exhibition model - spindle speed via belt stages - 4-jaw chuck Ø 110 mm with stepped jaws Space requirement L x W x H 1100 x 800 x 400 mm Weight 150 kg in good condition

Condition: used, Year of construction: 1981, GEMA LZ 170 Lead Screw and Feed Screw Lathe Lead Screw and Feed Screw Lathe GEMA Type / Model: LZ 170 Condition: Used Year of Manufacture: 1981 Technical Data Center Height 180 mm Diameter over Slide 230 mm Distance Between Centers 1000 mm Spindle Bore 40 mm Bed Width 240 mm Spindle Speed, 20 Steps 25 - 2000 rpm Motor Power 3.2 / 4 kW Tailstock Arbor MK 3 Quill Travel 120 mm Weight approx. 950 kg Dimensions (L x W x H) approx. 2200 mm x 800 mm x 1300 mm Equipment: - 3-jaw chuck Röhm, Ø 160 mm - Quick-change tool holder System Multifix Size B, without inserts Prodpfx Aozvfalebpsa - Chuck guard with limit switch - Machine light - Coolant system - Machine feet Inquiry item! Transportation costs will be quoted separately.

Condition: good (used), functionality: fully functional, Type 4 Prjdpfx Aozt Sytobpja Technical data : Center width approx. 400 mm Center height above bed 120 mm 24 speeds from 71 - 2240 rpm Drive power 0.6 / 0.8 kW Longitudinal feed, infinitely variable approx. 6 - 450 mm/min

Condition: used, Year of construction: 2003, mit Magazin Podpfx Aeztfxvsbpora

Condition: ready for operation (used), Leading and feed spindle lathe Weiler Matador -Distance between centers: 500 mm -Swing over bed: 140 mm -Longitudinal feed range via belt: 0.05–0.40 mm/rev -Longitudinal feed range via change gears: 0.018–0.800 mm/rev Podpsztbbtjfx Abpjra -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Chuck guard -Forkardt F 160 three-jaw chuck with wedge shank -Quick-change tool holder Multifix & insert -Drill chuck -Follower rest -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted.

Condition: ready for operation (used), Lead and feed spindle lathe Weiler Matador Prodpfsztaz Eex Abpea -Distance between centers: 500 mm -Swing over bed: 140 mm -Feed range, longitudinal, via belt: 0.05–0.40 mm/rev -Feed range, longitudinal, via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Collet chuck -Three-jaw chuck -Multifix base with inserts -Work light -Follower rest Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg

Condition: ready for operation (used), Lead and feed spindle lathe Weiler Matador -Distance between centers: 500 mm -Swing over bed: 140 mm -Longitudinal feed range via belt: 0.05–0.40 mm/rev -Longitudinal feed range via change gears: 0.018–0.800 mm/rev -Spindle head: Size 5 -Drive: Three-phase motor -Speed range: 15–3,550 rpm Psdpsztay Uofx Abpjra -Coolant pump -Collet chuck -Four-jaw chuck -Multifix base with inserts -Work light -Drill chuck -Documentation Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg

Condition: ready for operation (used), WEILER Matador VS 2, including a new three-axis digital display, Podszr Rnyopfx Abpera from a school workshop. -Maximum distance between centers: 140 mm -Distance between centers: 500 mm -Spindle speeds: 15 - 3550 rpm -Automatic longitudinal and cross feeds -Threading capabilities: metric, inch, etc. -New three-axis digital display -Electric chuck guard -Work light -Multifix base with inserts -Coolant system -Three-jaw chuck / collet chuck -Tailstock MK 3 -Various tools -Documentation Dimensions: L x W x H: 1.5 x 0.6 x 1.5 meters / Weight: 680 kg Errors and omissions excepted.

Condition: ready for operation (used), L & Z lathe WEILER MATATOR incl. Heidenhain digital display ND 780 -Center height approx. 150mm -Swinging diameter over carriage approx. 160mm -Swinging diameter over bed approx. 300mm Prodpfxszpba Uj Abpoa -Distance between centers approx. 500mm -Three-axis digital display / Heidenhain -Collets / quick-change tool holder & various collets -Chuck guard -Chip guard -Multifix base plate & inserts -Spindle bore 36mm -Speed range 30 - 3500 rpm -Automatic longitudinal / cross feeds -Tailstock MK 3 -Three-jaw chuck -Documentation Dimensions: L x W x H 1.6 x 0.7 x 1.6 meters / Weight 600 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Weiler Primus VC precision center lathe, year of manufacture 2008, 3-axis digital display, Siemens, with AC drive, stepless speed control, CE compliant! Technical data: >> Year of manufacture 2008, machine no. DB-01 >> Center height 140 mm >> Center distance 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 800 kg >> Spindle brake can be activated >> Machine dimensions approx. 1.4 m x 1.55 m x 0.95 m Accessories and equipment: >> 3-axis digital display, Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck 160 mm with 5 sets of jaws Podpfxszl T Trj Abpera >> Stop >> Mulifix size A with 4 steel holders >> Electric chip guard >> Machine lamp >> Drill chuck, centering point >> Change gears >> Splash guard About the machine: Offered is a Weiler Primus VC lead screw and draw spindle lathe, year of manufacture 2008, in very good condition. The control system, in combination with a precision center lathe from Weiler, performs the following functions: graphical display of travel paths and direction, graphical representation of the measuring system on the lathe, compensation of tool corrections, zero point adjustment to compensate for the workpiece position, radius/diameter switching, graphical display of the main spindle rotation direction, graphical display of the position of the machine's speed potentiometer. A very nice lathe with AC drive and stepless speed control of the working spindle. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced with a ground finish. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on-site under power and convince yourself of its condition.

Condition: used, Year of construction: 2012, functionality: fully functional, Weiler Primus VC Precision Lathe, manufactured in 2012. 3-axis digital display from Siemens with AC drive and stepless speed control. CE certified. Technical specifications: >> Year of manufacture: 2012, Machine No. HB 01 >> Center height: 140 mm >> Distance between centers: 500 mm >> Spindle speeds: up to 4000 rpm, stepless >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Hand lever tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 800 kg >> Spindle brake can be activated >> Machine dimensions: approx. 1.4 m x 1.55 m x 0.95 m Pedpfx Abozl T Hxjpora Accessories and equipment: >> 3-axis digital display from Siemens >> Quick-change tool holder with collets (see pictures) >> Tool cabinet >> 3-jaw chuck, 160 mm, with 7 sets of jaws >> Stop >> Mulifix, size A, with 4 steel holders >> Electric chip guard >> Machine lamp >> Spindle stop, drill chuck, center >> Change gears >> Splash guard About the machine: Offered for sale is a Weiler Primus VC lead screw and draw spindle lathe, manufactured in 2012, in very good condition. The control system, in combination with a precision lathe from Weiler, performs the following functions: graphical display of travel paths and travel direction, graphical representation of the coordinate system on the lathe, compensation of tool corrections, zero point shift to compensate for workpiece position, radius/diameter switching, graphical display of the main spindle direction of rotation, and graphical display of the position of the machine's speed potentiometer. This is a very nice lathe with AC drive and stepless speed control of the spindle. All slides move very easily and smoothly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows for the production of surfaces that are as smooth as ground surfaces. The digital display from Weiler makes working even easier and more precise. Take advantage of the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: used, Year of construction: 2019, turning length 1000 mm turning diameter 210 mm swing diameter over bed slide 300 mm centre height 167 mm spindle bore 40 mm bed width 210 mm turning speeds 40 - 2500 U/min weight of the machine ca. 1000 kg. range L-W-H 2000 x 1000 x 1700 mm Features: Podpfxjzl E T De Abpora - Digital display - 3-jaw chuck - Chuck guard - Multifix quick-change tool holder - Chip deflector - Chuck guard - Coolant system - Bed stop - Instruction manual

Condition: used, Year of construction: 1985, turning diameter over bed 340 mm turning diameter over slide rest 260 mm turning length 700 mm spindle bore 48 mm spindle turning speed range 25 - 2000 U/min spindle nose DIN 55027 KK 5 voltage 380 Volt total power requirement 2,2 / 4,4 kW weight of the machine ca. 1000 kg dimensions of the machine ca. 1.800 x 700 x 1.500 mm NARDINI MS 175E â?? Robust Lead and Feed Spindle Lathe A solid and proven conventional lathe for workshops, maintenance, mechanical engineering, and demanding machining tasks. The machine impresses with its robust construction, intuitive operation, and versatile applications. It is ideal for turning, thread cutting, face and longitudinal turning, as well as for machining a wide variety of workpieces. Advantages of the NARDINI MS 175E: â? Robust, durable machine construction â? Proven conventional technologyâ??ideal for workshops and training â? Lead and feed spindles for versatile machining capabilities â? Wide speed range â? Feed and thread tables for quick and convenient setup Prsdszlkwbjpfx Abpsa â? Extensive options for metric and other thread types â? Well-organized control panel with clearly arranged switches and adjustment controls â? Powerful and precise machining thanks to the machineâ??s sturdy construction â? Solid machine bed for excellent stability and low-vibration operation â? Protective cover over the spindle area for additional operator safety â? Ideal for one-off production, repairs, maintenance, and small-batch production â? A machine for users who value mechanical, reliable technology over unnecessary complexity Equipment: - 3-jaw lathe chuck - Various jaws - Lathe chuck guard - Collet chuck adapter - Various collets - Multifix tool holders - Multifix adapters - Vibration-damping feet

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 180 mm, spindle bore: 20 mm, turning diameter: 180 mm, turning diameter over bed slide: 180 mm, total length: 81 mm, total width: 31 mm, total height: 37 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, metric thread diameter (min.): 5 mm, metric thread diameter (max.): 25 mm, metric thread steps: 5, bed width: 350 mm, rotational speed (max.): 2,500 rpm, mount diameter: 10 mm, type of input current: DC, overall weight: 40 kg, quill mount: MK 3, cone diameter: 18 mm, spindle mount: MK 3, motor model: bezszczotkowy, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, type plate available, The Digima DC TYTAN 350 is a compact lathe designed for precise machining of metals and plastics. It is an excellent solution for small workshops, service centres, garages, technical schools, prototyping facilities and hobby applications. Its compact dimensions allow it to be installed in a limited workspace, while its robust construction provides stability and accuracy during operation. The machine is equipped with a powerful 850 W brushless motor and a direct-drive spindle. This solution ensures quiet operation, smooth performance and a long service life. The continuously variable spindle speed of 50 to 2,500 rpm allows the operator to adjust the machining parameters to the material, workpiece diameter and type of operation. Predpezlgtxjfx Abpsa The Digima DC TYTAN 350 can machine workpieces with a maximum swing over the bed of 180 mm and a distance between centres of 350 mm. The spindle bore measures 20 mm, while the supplied lathe chuck has a diameter of 100 mm. The machine can also cut metric threads from 0.5 to 2.5 mm and imperial threads from 12 to 52 TPI. The TYTAN 350 is suitable for producing bushes, shafts, pins, spacers, prototype components, replacement parts and small production batches. It allows users to manufacture and repair essential components directly in their own workshop, reducing outsourcing costs and waiting times. The standard equipment includes a 100 mm three-jaw lathe chuck, a drill chuck with an arbor, an MT2 live centre, a fixed centre, a set of five turning tools, operating and adjustment keys, and a rear splash guard protecting the workstation against chips and coolant. The machine is CE-certified and supplied with an operating manual. The Digima DC TYTAN 350 is a practical, user-friendly and versatile mini lathe which, despite its compact size, provides the performance required for real workshop applications. Its standard 230 V power supply means that no industrial electrical installation is required, making it a convenient solution for both professionals and demanding hobby users.

Condition: used, functionality: fully functional, type of input current: three-phase, overall weight: 2,500 kg, We are offering this used Matra MD 25 lead screw/draw spindle lathe, year of manufacture unknown. Safety guard retrofitted. Type: MD 25 Serial number: 3095 Power type: DS Podpfx Abszi Uzfepera Frequency: 50 Hz Operating voltage: 380 V Control voltage: 220 V Rated current: 17 A Fuse rated current: 35 A Wiring diagram no.: 112599100000 If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), functionality: fully functional, GORNATI 1000 X 200 PARALLEL LATHE LEGOR MODEL Pjdozhxd Iepfx Abpsra BAR CAPACITY: 65 USED MACHINE, IN WORKING CONDITION

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Weiler Primus LZ G GS Lead and Draw Spindle Lathe, 3-axis, Heidenhain, Accessories, Very good condition!!! Technical data: >> Year of manufacture 1990, Machine no. 4718 >> Center height 120 mm >> Center distance 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 4 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Brake motor >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, with 4 sets of jaws >> 1 four-jaw chuck, 125 mm, with 2 sets of jaws >> Collet chuck system, collets from 1-20 mm, in 0.5 mm increments >> Spindle stop for collets Podozg U Efspfx Abpora >> Mulifix size A with 3 steel holders >> 3 drill chucks >> Coolant system About the machine: Offered for sale is a Weiler Primus GS lead and draw spindle lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are almost as smooth as ground surfaces. Take the opportunity to inspect this machine on site while it is powered up and to convince yourself of its condition.

Condition: good (used), functionality: fully functional, Scope as per image. Infinitely variable speeds up to 3,000 rpm. Podezg Tgbjpfx Abpsra

Condition: good (used), Year of construction: 1991, functionality: fully functional, Weiler Praktikant 160 B, Prsdpfx Aezg Hvvobpsa Year of manufacture: 1991, 3-axis digital display, Maximum turning diameter: 160 mm, Distance between centers: 650 mm, Spindle speed up to 2,500 rpm, Tailstock, Collet set, Chuck, 2 tool holders.

Condition: used, Year of construction: 1997, machine/vehicle number: 5284, Offer 26156 Technical data: - Maximum turning diameter 120 mm - Distance between centers 450 mm - Maximum turning diameter over carriage 250 mm - Spindle bore 23 mm - Spindle nose with threads according to DIN 55027 - Taper of tailstock spindle MK 2 - 20 spindle speeds 60 - 3000 rpm - Feed rates – longitudinal 0.03 - 3.0 mm - radial 0.015 - 0.150 mm - Thread pitches 0.25 - 5 mm - Drive 400 V / 1.1 / 1.5 kW - Footprint approx. W 1200 x H 1250 x D 650 mm - Weight approx. 700 kg - Includes: - 3-jaw chuck Prjdpfx Aezf Ag Uobpja - Quick-change tool holder Multifix with 3 inserts - Live center - Collet set

Condition: excellent (used), Year of construction: 1995, Digital display Swing diameter 120 mm Turning length 700 mm Pjdpfjzfx S Tjx Abpera Spindle speed 2000 rpm Tailstock