TecVis GmbH

Condition: good (used), Year of construction: 2018, operating hours: 10,258 h, load capacity: 4,500 kg, lifting height: 4,330 mm, fuel type: electric, mast type: triplex, construction height: 2,250 mm, mileage: 10,258 km, Just arrived Electric three-wheel forklift Tjdpfxjzxy Upe Abtjb Year of manufacture: 2018 Brand: Still (Germany) Capacity: 4,500 kg Lifting height: 4,330 mm Mast height (lowered): 2,250 mm FEATURES: FREELIFTSIDESHIFTVORKENSPR EIDER Battery: with external charger Video to follow

Condition: used, Two-stage compressor Bitzer -Type: S6F-30.2 -Volume: 101.1 m3/h -Cooling capacity for R404A: 35.7 kW at -30°C/40°C, 25.3 kW at -40°C/40°C -Items in magazine: 2 Tjdpfx Aezxy Uiobteb -Reference number: S 256 -Condition: Used in very good condition, ready to work

Condition: like new (used), functionality: fully functional, Year of construction: 2015, overall weight: 230 kg, Kappel Suction Lifter Model: DSZ2 / 12 V Year: 2012 Drive: Battery-powered Tjdpjzxy T Sefx Abtob Lifting capacity: 1500 kg Suction plate: 6

Condition: excellent (used), Hydraulic clamp Maximum cutting height: 17 cm Maximum cutting width: 55 cm Motor: 3.7 kW Dimensions: 110 x 95 x 120 cm Disc: 500 mm Tjdpfozxy T Ejx Abtob

Condition: excellent (used), chain width 320mm cutting height 120mm max blades diameter 350mm shaft diameter 70mm Tedpfx Aszxy S Uobtsb shaft speed 3700 RPM two feeding speed iron cast body motor power 37kW weight 2200kgs

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 40 RC300 Year: 2015 Serial No.: 199223 TECHNICAL DATA: • Clamping force: 1,000 tons • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 40 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min Tsdpfxjzxy Szj Abtsb • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: excellent (used), chain width 320m cutting height 120mm Motor power: 30 kW max blade diameter 350mm Tedpszxy Snsfx Abtjb shaft speed 3700 RPM shaft diameter 70mm variable regulated feeder 4-24m/min iron cast body

Condition: good (used), mileage: 5,16,877 km, power: 235 kW (319.51 HP), fuel type: diesel, fuel: diesel, gearing type: automatic, emission class: euro6, Year of construction: 2017, Technical condition: good Visual appearance: good Production country: DE Please contact Christian Theißen for more information Tjdpfszxy Shsx Abtob Manufacturer: MAN Model: TGS 26.320 Year of build: 2017 Condition: Used Data: Mileage: 516.877 Km First registration: 08/2017 Number of vehicle owners: 1 Drive type: Diesel Gear type: Automatic Engine power: 235 kW Displacement: 10.518 ccm Number of axles: 3 Environment badge: 4 (green) Emission Class: Euro 6 Wheel formula: 6x2 Cab: local transport Colour: white Total permissible weight: 26.000 kg Location: 41468 Neuss immediately available

Condition: excellent (used), FARO Gage Plus F4 3D Coordinate Measuring Arm Manufacturer: FARO Model: Gage Plus F4 Machine Type: Mobile 3D Coordinate Measuring Arm / Measuring Arm Date of Manufacture: 15.11.2006 Revision: 23.5 For sale is a used FARO Gage Plus F4 3D coordinate measuring arm with CAM2 SmartInspect Pro software and a comprehensive range of measuring, tooling, and accessories. This mobile measuring arm is suitable for industrial measuring and testing tasks, quality assurance, as well as the acquisition and control of component geometries. Technical Data: Model: Gage Plus F4 Device Type: Mobile 3D Coordinate Measuring Arm / Measuring Arm Date of Manufacture: 15.11.2006 Revision: 23.5 Accuracy Specification: 5 + 8L/1000 µm Certification Date: 12.06.2019 Country of Manufacture: Switzerland Software: FARO CAM2 SmartInspect Pro Software key as shown in the images USB stick as shown in the images Equipment: FARO Gage Plus F4 Measuring Arm CAM2 SmartInspect Pro Software key USB stick / USB cable as shown in the images Measuring and probing accessories as shown in the images Tool and accessory case FARO protective cover Documentation / documents as shown in the images Additional accessories as shown in the images Dimensions: Dimensions of the measuring arm: not clearly specified Transport Data: Transport dimensions: not clearly specified Weight: not clearly specified Shipping or freight forwarding possible Condition: Used Optical condition as shown in the images. Nameplate present. Scope of delivery: FARO Gage Plus F4 Measuring Arm CAM2 SmartInspect Pro with key USB stick / USB cable as shown in the images Tool and accessory case Measuring and probing accessories as shown in the images Tjdpfx Abozxy Sbotjb FARO protective cover Documentation / documents as shown in the images Accessories as shown in the images Availability: upon agreement. Scope of delivery as shown in the images. Subject to changes, errors and prior sale.

Condition: good (used), Year of construction: 2008, machine/vehicle number: 9720, We offer competitive prices. Todpfx Abjzxy R Dotjb

Condition: good (used), Year of construction: 2021, operating hours: 3,861 h, load capacity: 2,500 kg, fuel type: electric, mileage: 3,861 km, JUST ARRIVED Electric pallet truck Brand: Still (Germany) Tsdpezxy Rqofx Abtjb Year of manufacture: 2021 Hours: 3,861 hrs Capacity: 2,500 kg Fork length: 1,150 mm Battery equipped with an automatic filling system and charger.

Condition: good (used), Year of construction: 2021, operating hours: 1,229 h, load capacity: 2,500 kg, fuel type: electric, mileage: 1,229 km, JUST ARRIVED Electric pallet truck Brand: Still (Germany) Tjdpszxy Rksfx Abtjb Year of manufacture: 2021 Hours: 1,229 h Capacity: 2,500 kg Fork length: 1,150 mm Battery equipped with an automatic filling system and charger.

Condition: ready for operation (used), plate length 3500mm plate width 1300mm water heating 8 hydraulic pistons pistons diameter 85mm plates span 640mm outomatic opening Todpfx Abezxy N Tjtsb year 1992

Condition: good (used), Year of construction: 2021, operating hours: 1,964 h, load capacity: 2,499 kg, fuel type: electric, mileage: 1,964 km, JUST ARRIVED Tedpfjzxy N Hox Abtob Electric pallet truck Brand: Still (Germany) Year of manufacture: 2021 Hours: 1,964 Capacity: 2,500 kg Fork length: 1,200 mm Battery equipped with an automatic filling system and charger.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Well-maintained and robust Heesemann MFA 8 wide belt sanding machine for professional use. This machine is particularly suitable for surface, fine, and paint sanding and features electronic control as well as cross and longitudinal sanding units. The machine is in very good used condition. Technical data: Manufacturer: Heesemann Type: MFA 8 Year of manufacture: 1994 Machine number: 9411252 Working width: approx. 980 mm Tedpfx Aozxy Nyobteb Voltage: 400 V Frequency: 50 Hz Total connected power: approx. 50 kW Rated current: 100 A Sanding belt dimensions: 4,800 × 150 mm Pressure pad belt: 4,450 × 140 mm Constant working height Electronic control Cross belt unit Longitudinal sanding unit Brush units Suitable for paint, fine, and surface sanding Weight: approx. 4,000 kg Equipment: Electronic control panel Pneumatic unit adjustment Conveyor belt Dust extraction connections CE marking Important note regarding the pass height: The 1,300 mm you mentioned cannot be correct. For a wide belt sanding machine of this design, the workpiece pass height is usually only in the range of a few hundred millimeters. Therefore, I would not include 1,300 mm in the advertisement unless we are certain of the correct value. Transport possible for an extra charge! The machine is currently still at the customer's location. The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale, and changes are subject to reservation. All information without guarantee.

Condition: used, functionality: fully functional, turning diameter: 435 mm, spindle motor power: 11,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 360 mm, type of input current: three-phase, total height: 1,900 mm, total length: 2,500 mm, total width: 1,500 mm, quill stroke: 275 mm, quill diameter: 55 mm, overall weight: 3,600 kg, Equipment: rotational speed infinitely variable, Control system: Mazatrol T-32-3 Todpfezxy Ntjx Abtsb 12-tool turret, tailstock included.

Condition: excellent (used), working width 430mm 4-knives shaft fence with angle regulation tables length 2080mm delta/star start Todpfxozxy Nmo Abtsb manual regulation of thicknesser table two feeding speed horizontal drill

Condition: used, Was taken from a working facility. Operational testing not done. Sold AS IS. Tsdpfx Abjzxy Najtsb

Condition: good (used), Year of construction: 2021, operating hours: 1,269 h, load capacity: 2,498 kg, fuel type: electric, mileage: 1,269 km, JUST ARRIVED Electric pallet truck Brand: Still (Germany) Year of manufacture: 2021 Hours: 1,269 h Capacity: 2,500 kg Fork length: 1,200 mm Battery equipped with an automatic filling system and charger. Todpezxy I Nefx Abtsb

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 12,000 rpm, travel distance X-axis: 400 mm, overall weight: 8,500 kg, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 5, This 5-axis DOOSAN DNM350/5AX was manufactured in 2017. It features a tool turret with 30 stations and utilizes BT40 tool holders. The machine is fully functional and has operated for 5500 hours. If you are looking to get high-quality milling and turning capabilities, consider the DOOSAN DNM350/5AX mill-turn centre we have for sale. Contact us for further details. • Tool holder type (tool turret 2): BT40 • Operating hours: 5,500 • Power supply: AC 380 V, 50/60 Hz Tedozxy Ivspfx Abtjb • Rated power: 40,61 kVA • Transformer capacity: 5 kVA • Full-load current: 64,67 A • Short-circuit capacity: 10 kA Technical Specification Taper Size BT 40

Condition: good (used), mileage: 7,03,317 km, power: 310 kW (421.48 HP), first registration: 08/2018, fuel type: diesel, tire size: 315/60R22.5, axle configuration: 6x2, wheelbase: 6,250 mm, fuel: diesel, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 10,630 mm, total width: 2,550 mm, total height: 3,990 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2018, Equipment: ABS, AdBlue, air conditioning, onboard computer, soot filter, = Additional Options and Accessories = - Front work lights - Enclosed cab - Air suspension - Particulate filter - Sleeper cab = Notes = Mercedes Benz Actros 2642 6x2 Streamspace - New Flatbed - Ramps - Full air - Dutch truck Year of manufacture: 08-29-2018 Mileage: 703317 km WDB96302110264223 96-BLH-1 APK (Technical Inspection): New box body Hydraulic ramps Full air suspension Refrigerator Etc. = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,809 cc Axle Configuration Suspension: Air suspension Front axle: Tire size: 315/60R22.5; Max. axle load: 7500 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Rear axle 1: Tire size: 295/60R22.5; Dual tires; Max. axle load: 11500 kg; Tire tread depth left (inner): 40%; Tire tread depth left (outer): 40%; Tire tread depth right (inner): 40%; Tire tread depth right (outer): 40% Rear axle 2: Tire size: 315/60R22.5; Max. axle load: 7500 kg; Tire tread depth left: 40%; Tire tread depth right: 40% Weights Todpszxy Icjfx Abtsb Unladen weight: 11,615 kg Payload: 14,385 kg GVW (Gross Vehicle Weight): 26,000 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 06.2027 Technical condition: good Optical condition: good Identification License plate: 96-BLH-1

Condition: good (used), Year of construction: 2021, operating hours: 1,811 h, load capacity: 2,000 kg, lifting height: 2,424 mm, fuel type: electric, mast type: duplex, construction height: 1,665 mm, mileage: 1,811 km, Just arrived Electric stacker Brand: Still (Germany) Year of construction: 2021 Only 1,811 operating hours Capacity: 2,000 kg Lifting height: 2,424 mm Mast lowered height: 1,665 mm EQUIPPED WITH FREE LIFT Todpfozxy Hxox Abtsb Battery: with charger Automatic filling system Video to follow

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/90/H75 mm Todpfszxyvysx Abtjb -Total weight: 4.5 kg

Condition: good (used), electric motor, three-phase motor -Power: 0.55 kW -Speed: 1410 rpm Todpfx Ajzxyvtjbteb -Shaft: Ø 19 x 40 mm -Design: B3, explosion-proof -Protection class: IP 55 -Quantity: 1 available -Dimensions: 320/163/H255 mm -Weight: 24.1 kg

Condition: excellent (used), functionality: fully functional, Working width 220 mm Working height 120 mm 5 spindles Spindle arrangement: bottom/right/left/top/bottom Spindle diameter 40 mm Motors: 4 kW, 5.5 kW, 5.5 kW, 4 kW Table length 198 cm Table lubrication Stepless feed speed adjustment Tsdpfozxyvmsx Abtjb Pneumatic pressure on feed rollers Head adjustment in two axes Electric adjustment of top head – 0.25 kW Feed motor power 2.2 kW