KRC partners s.r.o.

Condition: used, 2K Adhesive System, 2-Component Dispensing System with Hand Applicator for 2-Component Adhesives Mayer & Mayer Type MMR R2020R VLOOP DG 2:1 PUB Serial No. 2021-001 Year of manufacture: 2021 VLOOP = Very LOw OutPut versions, approx. 30 – 210 ml/min Mix ratio: 2:1 (adjustable) Container size: Standard, 20 liter bucket Air pressure: 6 – 8 bar Air consumption: 80 –100 m³/h Power supply: 230V, 50 Hz - No open containers - Fully pneumatic drive - Continuous, precise mixing - Chain-driven gerotor metering pumps - Easy ratio adjustment - Compact and easy to handle - Simple operation and maintenance - All components/fittings made of stainless steel - Stainless steel transfer pumps - Stainless steel gear pumps - Double piston rams - Mobile aluminum profile unit on wheels - 8 meter hose package consisting of a 5 meter supply hose and 3 meter flexible whip hose lines - Includes GSMFG G200X-GUN (hand applicator) - Boom arm device for easier hose guidance - Operating manual - Approx. 130 mixer tips (F-System) included Kwjdox Urb Aepfx Adwot All installed parts are sourced from reputable, high-quality suppliers such as Ingersoll Rand, Parker, VSE, Zenith, and others. Dimensions (W x H x D): 800 x 2000 x 2700 mm Weight: 332 kg Currently used silicone adhesive: Component (A) LOCTITE SI 5610 A (container empty) Component (B) LOCTITE SI 5610 B (container half full) The MM large dispensing systems are specifically optimized for the use of structural MMA adhesives from EBS, LLC, featuring a robust, durable, and maintenance-friendly design to ensure long-term, trouble-free, and consistent adhesive application. The system can be modified for dispensing a wide range of two-component adhesives such as polyurethanes, epoxies, methyl methacrylates, and others. BASIC FUNCTIONAL OVERVIEW: A pneumatically driven motor, powered solely by compressed air, drives the adhesive and activator gear pumps (= metering pumps) via a chain drive system. These metering pumps are continuously supplied by adhesive and activator transfer pumps, which are also air driven. This way, components A and B are kept separate but are pumped in the pre-set ratio through separate hose sets to a dispensing gun, where they are mixed at the gun outlet by a static mixer nozzle. As a result, the entire dispensing system requires little to no cleaning. The flow rate, which controls the dispensing speed, can be adjusted via the speed of the pneumatic drive motor.

Condition: used, Year of construction: 2023, Machine in operational condition! Ask for spec and pictures1 Also feeders can be bought separate: Ksdpfx Adsx Up D Ujwewt Radial Feeder CENCORP RTF 60 Strip Feeder CENCORP Located in EU!

Condition: used, Year of construction: 2015, Multiple conveyor systems available from 2012 to 2021. Ask for specific list. Amongs others: ARS01 TRM01 D TRM02 D ACS 01 TRM03 D STM03 STM03 D TRM03 D FPS26D Insignum 1000 D scan TDM05 D MPS50 D ACS01 Kwsdox Stanepfx Adwot ARS01D TRM03 AMS03D AES03D TDM05 TRM03 TRM01 AMS03D Get in touch!

Condition: used, Year of construction: 2015, Machine operational. Located in EU. Kodpsx Sr U Dsfx Adwswt For further specification, please request.

Condition: used, Year of construction: 2015, operating hours: 35,052 h, Operational machine! Modular Type Multi - Purpose Automated Fabrication Machine sFAB50. Hours worked: 35052 Kwsdpfsx Nh Rpsx Adwot The component feeders: Radial tape feeder pitch 12,7 mm - 3 pcs. Horizontal stacked stick feeder - 1 pc. The ball screw of X-axis may need to be replaced in the near future. Ask for specifications!

Condition: used, Year of construction: 2011, 2 machines available in working condition!  Machine still in operation and will be available April/March time. Possible for video demo! Kwedpfxex I Na As Adwst Whats included: Double 8mm 83pcs, Double 8mm 13’’ 20psc, 12mm 48pcs, 16mm 16pcs, 24mm 7pcs 32mm 2pcs, 44mm 3pcs, Tray loader 1pcs, Lot of spare parts

Condition: excellent (used), Year of construction: 2004, We are offering this very well-maintained U-R-B-A-N GmbH & Co AMS 6010 reinforcement screwdriving machine, year 2004. Manufacturer: U-R-B-A-N GmbH & Co Model: AMS 6010 Year of manufacture: 2004 Machine type: Reinforcement screwdriving machine Dimensions: 5 m length, 2.15 m width, 1.8 m height Weight: approx. 550 kg Operating manual and electrical schematic are available. Kodpfsx Ifmrex Adwewt If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2010, operating hours: 2,000 h, functionality: limited functionality, machine/vehicle number: ERW20101111, overall weight: 5,000 kg, wall material: steel, Cleaning line in good visual condition for sale. Specifics: Baths: 10x Bath dimensions(outer size): L2440xW590xH1190mm Additional stainless-steel baths: 2x Stainless-steel bath dimensions(size inner): L600xW600xH700mm Ventilation inlets for toxic fumes(between baths): 4x Control unit: 1x Crane with electric motor(in working condition): 1x Rails in working condition: 2x Guarding rail with steps: 8119x1000mm Water filter tanks: 2x Combined weight: 5t+ Additional: PVC pipes, stainless-steel mesh, circulation pumps, etc. Overall cleaning line length when assembled: 12050mm Kedjxvxqdjpfx Adwewt Overall cleaning line width when assembled: 4160mm Assembled drawings available. Cleaning line is and was purchased in non-operational state. Located in Latvia. Currently in disassembled condition - as is. Logistics are handled by potential buyer!

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 100 h, total length: 2,000 mm, total width: 2,450 mm, total height: 2,350 mm, input voltage: 400 V, control voltage: 24 V, type of input current: AC, We are offering 3 units of brand-new cartoning machines, manufactured in Slovenia. The machines were used only during the testing phase and are in perfect condition. - Brand-new, only used for production test runs - Includes manufacturer’s warranty (12 months, can be extended to 24 months) - Complete technical and user documentation - Made in Slovenia using standard industrial components - All critical parts are of European origin - Robust and easy-to-maintain design Technical details: - Dimensions: 2000 x 2450 x 2350 mm - Pneumatics: SMC - Max. pressure: 6 bar - Working pressure: 5 bar - Installed power: 5 kW, 20 A - Supply voltage: 3 x 400 V AC, 50 Hz - Control voltage: 24 V DC - Servo motors: Siemens - Control unit: Siemens S7-1500 - HMI: Siemens HMI Specification of boxes: - Method of loading unformed boxes: manual - Method of box forming: automatic - Machine operation: semi-automatic - Max. speed of box forming: 6-8 boxes/min - Max length of a box a_max: 600 mm - Max width of a box b_max: 400 mm - Max height of a box h_max: 350 mm - Min length of a box a_max: 300 mm - Min width of a box b_max: 250 mm - Min height of a box h_max: 125 mm NOTE 1: a+b < 1000 mm, b+h < 600 mm Ksdpfxexvpa Ao Adwowt Currently, the machine can produce boxes in three different widths (b): 250 mm, 290 mm, and 390 mm. The length (a) and height (h) can be arbitrary, but must comply with the conditions specified in Note 1. Price is per unit.

Condition: used, Year of construction: 2012, Operational condition and available now. Additional information per request! Kjdpfsxva Uqsx Adwswt

Condition: used, Year of construction: 2006, Operational condition. Lightning Head Left-to-Right PCB Transfer Direction 3mm (0.117") Edge Clearance HSC Nozzle Changer Kit Fixed 36 Slot Feeder Bank Kjdpfxsxva Dle Adwswt 4" Outbound Rear Single Lane Brd Support 30-SPINDLE HEAD PERFORMANCE KIT UPGRADE KIT, ACCURACY ENHANCED SPINDLE Second Rear Interface

Condition: used, Year of construction: 2006, Machine operational condition. FlexJet 2.6MPP Front Head / Pressure Enhanced Rear Head Magellan 2.3 MPP – Rear Four Sided PEC Lighting Board transfer Left-To-Right 3mm Edge Clearance Rear DPTF Mounting Location 4” Outbound, 18” Max. Bd Automatic PWC Kwodpfxoxvay Ts Adwet Single Lane Board Support All Feeder Banks Fixed 24V Transformer Kit Interface Machine With PTF Rear User Interface Kit CE Compliance GSM SECII/GEM Software Driver, S/W, New Product Introduction English Flip Books Ask for additional information!

Condition: used, Year of construction: 2018, Working condition unit. Cleaning: Cyclon Duo Head setup: Proflow Atx Support: HD-GridLok vorbereitet, will be sold without GridLok Modul Kwsdpjxt Ey Hefx Adwst Camera: HawkEye Make an offer!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 14 kg, warranty duration: 12 months, input voltage: 230 V, total length: 420 mm, total height: 450 mm, total width: 245 mm, volume flow: 420 m³/h, Equipment: chassis, low noise, Fume extraction with remote control and suction hose Air inlet interface ρm flange Max. Power 300W Air velocity 24/ms Filtration efficiency 0.3 µm / 99.97%. Noise 59ᐸdb Length of suction hose 1.5M System shear flow approx. 420m³/h Dimensions L420 x B245 x H450 Weight 14.0kg Application: Kjdpfx Adjxrgl Iowswt This product is suitable for places dealing with air pollution such as smoke, peculiar odors, dust, toxic and harmful gases generated during soldering process, laser marking and engraving, printing, etc. - Extraction unit for use in the workplace - Separately replaceable fine dust pre-filter M5 - Large HEPA H 13 filter surface with 2.4m² for optimum particle filtration and long filter service life - Activated carbon for effective gas cleaning - Portable extraction unit, for flexible placement directly under or next to the workplace - Easy filter change - Variable power control through percentage speed settings in 10 steps - Health protection through electronic filter monitoring and filter alarm - Long service life thanks to high-quality EC blower - Quick, easy and stable installation thanks to Easy-Click system

Condition: ready for operation (used), Year of construction: 2016, Operational condition and available for delivery! Fully automated with a feeder system for entire magazine. Kedpfjxpun Ejx Adwjwt *Look at the additional options spec shown on picture Additional pictures and information  upon request! Located within EU!

Condition: new, Year of construction: 2025, Number of placement heads: 4 Number of feeders: 50 Minimum component size / smallest printable component: 0201 (inch) components Maximum component size: ~40 × 40 mm Minimum pin pitch: ≥ 0.3 mm Maximum PCB size: Standard: 400 × 200 mm; Optional: 400 × 290 mm Z-axis travel range: 20 mm zjyingxing.com Maximum placement speed (peak): ~9,500 pcs/hour Average placement speed: ~8,000 pcs/hour Kedpexnlmiefx Adwjwt Placement accuracy: 0.01 mm Nozzle buffer range: ~4.5 mm Drive / motor: Servo motor (Panasonic) + ball screw & linear guide rails (TBI linear guide) Cameras / vision system: One “mark” camera, four high-speed cameras, plus one high-definition camera Power supply: 220 V / 110 V, 50 Hz; average power consumption approx. 400 W Air requirements: Compressed air: 0.6-0.7 MPa Air pump capacity: Minimum 80-120 L/min, pump volume ≥ 60 L Number of trays (components outside feeders): Supports up to approx. 48 trays for non-feeder parts, each with coordinates within the placement area PCB handling: Automatic 'left-in, right-out'; supports left-right connection of devices (infeed/outfeed) Machine dimensions: ~900 × 1140 × 900 mm (L × W × H) Weight: ~250 kg Software / interface: English; free software updates; user interface with display

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, input voltage: 220 V, control voltage: 220 V, Equipment: CE marking, High precision, adjustable full automatic oral bottle filling sealing machine . Ksdsxl Edcepfx Adwewt

Condition: used, Year of construction: 2005, Operational condition. Kwodpfxjxd Ad Re Adwet

Condition: used, Year of construction: 2011, Operational condition. Kjdpfx Aexdz Tdodwjwt

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Line was implemented & wasnt used for serial production yet except FOT production. Quite new. It contains below processes : Robotics ArcWelding Cell With 3 Axis Turn Table x 2 Qty 2S-1100 Robotics ArcWelding Cell X 1 Qty Knuckle Bracket and Spring Seat Fixture x 4 Qty Stab Bracket Fixture X 2 Qty Knuckle Bracket Projection Welding System X 1 Qty Automatic Base Cap and Knuckle Bracket Assembly System X 1 Qty Kedpew Upppsfx Adwowt Drilling And Press Machine with Industrial Robot X 1 Qty Leakage Test System X 1 Qty Marking System X 1 Qty

Condition: used, Year of construction: 2017, Operational condition SPI machine. Kedpfx Adjw Ty Rbowswt Ask for specification!

Condition: good (used), Year of construction: 2008, iineo is highly configurable, offering 24 different machine variants for the single-head model: - 4 pieces of 1st generation trolleys - 4 pieces of 2nd generation trolleys - 132 pieces of 1st generation 8mm feeders - 12 pieces of 1st generation 12mm feeders - 4 pieces of 1st generation 16mm feeders - 1 piece of 1st generation 24mm feeder The linear motor gantry is equipped with a rotary turret head featuring 12 pickup nozzles. The system includes a board positioning mechanism and options for oversized boards. Feeders can be configured at both the front and rear or set up front-only. The advanced iineo platform delivers multiple enhancements over the Europlacer machine range, such as an exceptionally high feeder capacity, the largest board size capability in the industry, and increased maximum component height. This platform utilises Europlacer's unique Integrated Intelligence™ and proven key features: - Highly durable and flexible turret head - Intelligent feeders - 3D Placement System (3DPS) - Powerful software solutions It also introduces new technologies, including linear motors and digital camera systems. Heads: 1 rotary head on a linear X/Y gantry with 8 or 12 simultaneous pickups and a 40-position smart nozzle bank (various options available). Placement rate: up to 14,000 components per hour (0.257 sec. per chip) Component sizes: Kwjdpfx Adow Rl R Iewet - 01005 to 50 x 50 mm (optionally up to 70 x 70 mm and connectors up to 100 mm) Lead pitch: - 0.3 mm (QFP), 0.4 mm (μBGA) standard - 0.15 mm (QFP), 0.2 mm (μBGA) with fixed camera option Lead size: - 0.15 mm (QFP), 0.2 mm (μBGA) standard - 0.07 mm (QFP), 0.1 mm (μBGA) with fixed camera option Placement accuracy: 35 μm (QFP) to 60 μm (chip), standard Feeder capacity: up to 264 × 8 mm tape feeders plus 10 JEDEC trays Maximum PCB dimensions: - 700 x 460 mm - 700 x 600 mm - 1000 x 460 mm Additional features: - Electrical test capabilities - Fixed camera for fine-pitch components - Automatic conveyor width adjustment - Additional nozzle magazine options - Special nozzle magazine options - Rear-mounted display and keyboard - Internal matrix tray holder

Condition: used, Year of construction: 2008, Machine is from 2008 and is the 12 head version. The machine has 1 problem, the X motor is running at 60%, it has an issue. Machine is being used daily in production until today. If any Feeders/Trolleys available and included are still to be confirmed. Kwjdpfow Rfckox Adwot Maintenance done by OEM representative.

Condition: ready for operation (used), Year of construction: 2014, Operational condition. Located within EU. Kwedpfsw E E Ansx Adwot

Condition: ready for operation (used), Year of construction: 2015, Machine in operational condition. Located within EU. Ksdsw E Eytopfx Adwowt