Tischlerei Seeber GmbH

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, 1. Electric spindle located on the upper side With a 6-position tool changer. Upper drilling unit: Drills for vertical drilling: 12 Drills for horizontal drilling X: 4 Drills for horizontal drilling Y: 2 Lower drilling unit: Drills for vertical drilling: 12 Drills for horizontal drilling X: 4 Drills for horizontal drilling Y: 2 Software: Maestro CNC Control panel 2 independent clamps for supporting and handling the panel Safety laser at the entrance Lhjdpfxszgt Hbe Abyjh Approximate weight: 2386 kg Only 525 operating hours.

Condition: new, Year of construction: 2026, GANNOMAT "PROTEC 571" (Drilling, Grooving, Milling) Base machine complete in standard configuration for drilling and grooving including: - Additional safety device via louver curtain - Requirement for horizontal Lamello P-system milling - Requirement for milling diameter > Ø 16 mm, as well as for the use of multi-part milling tools Detailed technical data can be found in the data sheet for ProTec Type 0571 Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y / 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in continuous mode max. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg 1 Milling unit Profit HSK63F with 3-way magazine for automatic tool change, motor 5.5 kW (S1), 1000-18000 rpm with frequency inverter, right and left rotation, for tool holder HSK63F with collet 462E/OZ25, milling cutter length up to 130 mm including options Ljdpfx Abjzgfwlsyjhh 1 Roller table 765 mm (Y-axis) foldable, for the front of the machine, width 500 mm 1 Roller table 765 mm (Y-axis) foldable, for the back of the machine, width 500 mm 1 Auxiliary stop 600 mm with integrated rollers for roller tables 1 TOOLS: Drill set for ProTec 1 Carbide grooving cutter  125/30 mm, grooving cutter width (SB) 4 mm, Z=12, LI, from Leitz 1 Tools for milling unit Profit HSK63F and HSK63F with 3-way magazine with collet 462E up to shank diameter 25mm, HSK and milling cutter set 1 HSK mounting set 1 Mounting device HSK63F, simplest operation with the highest level of user comfort thanks to the roller clamping system, no clamping or tightening required, mounted on a stable base or on a workbench 1 Hook wrench for HSK63F collet 462E 1 Extraction distributor Ø 160 mm / Ø 80-80-80 mm, grid 196 mm 1 Counterpressure device from above 1 LED lighting in the machine's working area 1 Tool for vertical Lamello P-system milling Machine with very good equipment including many drills and tools New machine with full warranty. The machine can be viewed and demonstrated in our showroom. A special price can be offered for our showroom machine!!!!!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, For Sale: Hundegger K2i Blockhouse Unit – Fully Refurbished, Excellent Condition I am offering a Hundegger K2i Blockhouse Unit in excellent condition. The unit has been professionally refurbished and is ready for immediate use. Key features: * Fully refurbished and very well maintained * One of the milling heads is brand new (replacement value approx. €5,000) * Reliable and precise operation * Easy to integrate into existing machines The unit can be removed from its current machine and installed into any Hundegger K2i, K2, or K2 Industry machine, making it a cost-effective solution for upgrading or replacing an existing unit. For further information, technical details, or additional photos, please feel free to contact me. Ljdpfxszgcf Ts Abyohh

Condition: used, Year of construction: 2012, power: 20 kW (27.19 HP), working width: 1,300 mm, number of spindles: 82, plate height: 90 mm, working length: 3,000 mm, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,300 mm Maximum panel thickness: 90 mm Total number of drilling spindles: 82 Drilling units – Unit 1 (top) Spindles for vertical drilling: 31 Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Drilling units – Unit 2 (bottom) Spindles for vertical drilling: 31 Lhedezf Ibdspfx Abysh Spindles for horizontal drilling in the X direction: 8 Spindles for horizontal drilling in the Y direction: 2 Milling spindles Number of milling spindles: 2 Milling spindles – Unit 1 (top) Number of controlled axes: 3 Motor power: 4.5 kW Milling spindles – Unit 2 (bottom) Number of controlled axes: 3 Motor power: 4.5 kW Routing units Number of routing units: 2 Routing units – Unit 1 (top) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW Routing units – Unit 2 (bottom) Unit: Fixed for creating channels in the X direction Max. tool diameter: 160 mm Motor power: 3.5 kW MACHINE DETAILS Total installed power: 20 kW Machine programming software: BIESSEWORKS EQUIPMENT Automatic panel stacking system with motorized transfer Barcode reader (manufacturer: SICK) CE marking Protective grid Safety mats The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8565

Condition: used, machine/vehicle number: 008650, X axis working area: 3280 mm Y axis working area: 1320 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 24 Total number of tool changer positions: 16 Lhodpozdqttefx Abyjh

Condition: new, Year of construction: 2023, functionality: fully functional, input voltage: 230 V, input current: 16 A, input frequency: 50 Hz, travel distance X-axis: 915 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 176 mm, number of axes: 3, table length: 1,170 mm, table width: 760 mm, rotational speed (max.): 24,000 rpm, Equipment: CE marking, documentation/manual, european tool clamping system, Compact 3-axis SCM Startech CN K CNC machining center for milling, engraving, sign making, and 3D prototyping. Work table of 1,170 x 760 mm, X-Y-Z travel of 915/610/176 mm, and Hiteco 2.4 kW milling head up to 24,000 rpm with ER25 tool holder. Equipped with: - Full safety enclosure - LED lighting - Numerical control with interpolation - HICAM2 interface - Ethernet connection - Pneumatic suction cup kit Lhedpozcfwrsfx Abyeh - Tool height sensor - 4th interpolating axis for lathe work - Base with wheels and adjustable feet Single-phase 230V power supply. Ideal for carpentry, engraving, machining, and prototype manufacturing.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 351.10.001.16, functionality: fully functional, workpiece length (max.): 3,000 mm, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, drilling depth: 55 mm, TECHNICAL DETAILS Maximum horizontal drilling depth: 30 mm Maximum vertical drilling depth: 55 mm Horizontal spindles: 6 Vertical spindles: 9 Spacing between horizontal spindles: 32 mm Spacing between vertical spindles: 32 mm Maximum diameter of horizontal spindles: 15 mm Maximum diameter of vertical spindles: 8 x 15 mm, 1 x 35 mm Workpiece dimensions, X-axis: 280 - 3,000 mm Workpiece dimensions, Y-axis: 180 - 920 mm Workpiece dimensions, Z-axis: 10 - 50 mm Speed, X-axis: 25 m/min Speed, Y-axis: 25 m/min Speed, Z-axis: 15 m/min Motor power, drilling head: 1.5 kW Speed, drilling head: 3,600 rpm Speed, circular saw unit: 9,000 rpm Speed, milling spindle: 24,000 rpm Diameter of circular saw blade: max. 100 mm MACHINE DETAILS Operating/ambient temperature: 15–40 °C Ledpfx Aozcdkwobyehh Humidity: max. 90 % at 20 °C Operating pressure: 6–8 bar Nominal compressed air consumption: 60 l/min Air consumption: 1,650 m³/h Diameter of compressed air supply: 5/8" Inner diameter: 16 mm Dimensions & Weight Dimensions (L x W x H): 2,100 x 1,605 x 1,950 mm Weight: 850 kg Operating hours (estimated): approx. 800 h EQUIPMENT Additional support roller tables

Condition: good (used), total length: 24,000 mm, overall weight: 11,000 kg, HUNDEGGER P10 – CNC AUTOMATED TIMBER PROCESSING CENTER For sale: a Hundegger P10 machine designed for processing timber components. The machine is in good working order and is currently in production. Until July 15th, there is an opportunity to view the machine in operation and check all its functions before purchase. Key information: * Machine in continuous operation * Demonstration of operation possible * CNC control * Processing of roof truss elements, frame structures, and other carpentry components * High accuracy in performing joints * Design known for its durability and ease of maintenance Unlike many machines offered after disassembly, here the buyer can verify the technical condition during normal operation of the facility. The machine is available for inspection by appointment. More information, photos, and videos of the machine in operation will be provided to interested parties. Lsdpfx Absza T Sxoyehh

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 Lhodpfxszavvgo Abyeh - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Safety feature: - Voltage [V]: 400 - Current consumption [A]: 10 - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 59978, functionality: fully functional, BIESSE SKIPPER 100 CNC Drilling and Machining Center For sale: BIESSE SKIPPER 100 high-performance CNC through-feed machining center designed for drilling, routing and grooving operations in furniture production and panel processing. The machine offers excellent productivity, high machining accuracy and compact industrial construction. Technical Specifications Manufacturer: BIESSE Model: SKIPPER 100 Axes X-axis travel: 3,000 mm Ljdpfxjzatrrs Abyjhh Y-axis travel: 1,000 mm Z-axis travel: 60 mm Workpiece Dimensions Length: 90 – 3,000 mm Width: 70 – 1,000 mm Thickness: 8 – 60 mm Spindle Unit HSK electrospindle Spindle speed: 6,000 – 18,000 rpm Spindle power: 3.5 kW Total installed power: approx. 20 kW Drilling Units Per operating unit: 29 vertical drilling spindles 8 horizontal drilling spindles along X-axis 2 horizontal drilling spindles along Y-axis Total: 78 independent spindles Upper and lower machining units Equipment Automatic panel size detection Electronic thickness control Central automatic lubrication BiesseWorks software Roller loading table Unloading conveyor Dust extraction connections Safety enclosure Machine Dimensions Overall length: 7,290 mm Overall width: 4,400 mm Height: approx. 2,000 mm Weight: approx. 2,700 kg The machine is in good working condition and can be inspected under power by appointment. Photos, videos and additional technical information available upon request.

Condition: used, Year of construction: 2006, machine/vehicle number: BM0000029, controller model: WINDOWS XP, number of spindles: 42, plate height: 60 mm, plate length: 2,800 mm, plate width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowel insertion with an additional robotic arm for loading! The machine must be picked up between June 10, 2026, and June 30, 2026! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel thickness: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool changer: Yes Number of tool magazine slots: 10 Control and safety Control system: WINDOWS XP Lodpfx Ajy Uvnajbyshh Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light curtains 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Barcode scanner HONEYWELL Protective netting on the machine The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8530

Condition: like new (used), 1 milling unit 8 vertical drills Lodpsy Ukzzsfx Abyohh 6 side drills 1 saw 12 kW Year of manufacture: 2011

Condition: used, Year of construction: 2014, Working dimensions: X = 3425 mm, Y = 1287 mm, Z = 325 mm. Max. workpiece height: 180 mm. Max. clearance under the hood: Y = 1450 mm / Bumper version = 1370 mm. Includes CabinetControl Base, 1 machine license, and 1 office license. Milling head 7830, 1-stage, power 6.5 kW, air-cooled, n(max.) 1000 - 18000 min-1, infinitely adjustable. Max. power at 12000 min-1 to 18000 min-1 with HSK-F 63 tool holder, with collet chuck with HSK shank. Drilling unit 7884, 14 spindles, 10 vertical spindles individually accessible, arranged in an L-shape, 6 in the X direction and 4 in the Y direction. Drive power 3 kW, 32 mm pitch. Sawing unit: Integrated sawing unit for sawing/grooving in the X direction, n(max.) 1000 - 5650 min-1, infinitely adjustable. Tool holder: A = max. DM = 125 mm. Ledpfx Aoy Tpz Rjbyjhh Location: Supplier.

Condition: used, Year of construction: 2014, machine/vehicle number: 33041, functionality: fully functional, power: 4.5 kW (6.12 HP), travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 90 mm, Equipment: CE marking, The machine has been regularly maintained and is in excellent working condition. Linear guides and ball screws are in excellent condition without any play. Input and output tables are fully functional. The transport clamps operate powerfully and in sync. The drilling system is equipped with 82 spindles. Both the upper and lower milling units use ISO 30 tool holders. The motor bearings are in good condition and run at 24,000 rpm. The machine is operated via the BiesseWorks interface. The electrical components inside the control cabinet are clean and dust-free. Lodpfx Ajy Sfi Iebyehh

Condition: good (used), Code: 0382 Brand: ALBERTI Model: BASIC PLUS CN - CE Standard CNC working centre for furniture and fittings – CE Standard Top vertical “point-to-point” drilling machine with continuous feed, with panel loading and longitudinal movement, with a monolithic structure made of electro-welded steel. Independent control of 3 axis with optimised drilling and insertion cycles Lhsdpfx Ajy R U Absbyoh Panel dimensions: Max 3000 x 1200 x 60 mm Min 300 x 110 x 15 mm (automatic loading/unloading) Min 300 x 110 x 8 mm (manual loading/unloading) Monoblock configuration with independent spindles: N° 16 independent vertical spindles with centre-to-centre distance 32 mm , along the Y-axis (Assembly) N° 3 horizontal drilling heads, with dual output in X direction pitch 32 mm and vertical presser, mounted on the side of the monoblock N° 10 independent vertical spindles with centre-to-centre 32 mm arranged along the X axis (Fitting) N° 1 horizontal drilling head with dual output in Y direction and vertical presser Workbench configuration: Loading roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Reference surface inside the machine body, consisting of ground PVC-coated idler rollers, with a usable width for panel support 1000 mm Work surface height 920 mm, adjustable +/- 30 mm Discharge roller section with straight PVC-coated rollers Useful length for panel support 2000 mm Useful width for panel support 840 mm Panel guide bar with automatic positioning movement Vertical clamps mounted on the panel guide bar, automatically adjusted to the workpiece thickness via pneumatic cylinders Vacuum pump 40 m³ Milling unit“Electric spindle” 9 Hp Tool holder HSK-63F for AUTOMATIC/MANUAL tool change system. Speed selectable via program (12.000/18.000 rpm) - Device capable of performing milling operations in X and Y directions, both linear and interpolated, within the machine’s technical limits. Rotation in both Right and Left directions. Tool Ø max 40 mm – N°1 HSK-63F right included Automatic tool changer Equipped with 4 positions for the automatic retrieval of tools with max diameter 40 mm. Includes a set of 4 shanks for taper ISO 30 . Compatible with milling unit – N° taper HSK-63 included Circular blade unit: Composed by independent motor 1,8 Hp, speed 12.000 rpm, capable of cutting grooves in X and Y directions within the machine’s technical limits. Tool mounting with flange, max bore Ø 120 mm, max thickness 8 mm Control panel and numerical control unit Mod. ALBNT (TPA): operating system Windows XP - ALBATROS TPA software Installed power 12 Kw Compressed air 6/7 bar Extraction: speed 30 m/s - Flow rate 8686 m³/h Overall dimensions: see attached sheet Weight kg 3500

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Equipment: documentation/manual, The automatic drilling machine Jet Smart is the ideal solution for craftsmen and small and medium enterprises. Flexibility, speed and ease of use are the main features of the machine which ensures high productivity and a perfect drilling in any working condition. Fast and precise drilling! Boring from the top: a choice without compromises! Perfectly aligned joints aligned and no error thanks to automatic reading of piece dimension, that allows to correct any difference between real panel length and the one set. Lhedpfey Rl Arjx Abyjh ///Technical details Max. piece dimension - 3050x900x60 mm Min. piece dimension - 200x70x10 mm Max. speed axis X-Y - 40-40 m/min Boring head: vertical / horizontal spindle, blade X - 12 / 6, 125 mm Electrospindle (S6) - 5,5 kW (7,5 HP) - 18.000

Condition: used, Year of construction: 2017, functionality: fully functional, For sale: CNC drilling and milling center Morbidelli Uniflex S (SCM Group), year 2017, serial number AA2/004505. Weight 4,450 kg, power supply 400V/3-phase, 46A/50Hz. The machine is in working condition. Contact us for more information and price. Ljdpfx Abjy N Tmpeyshh

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, workpiece length (max.): 3,200 mm, workpiece width (max.): 920 mm, workpiece height (max.): 70 mm, number of slots in tool magazine: 6, actuation type: pneumatic, total height: 2,350 mm, total length: 3,675 mm, total width: 1,660 mm, overall weight: 2,500 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, HOLZ-HER Vertikale CNC Evolution 7405 4mat, Baujahr 2014, Lieferung ab Standort Bearbeitungslänge: 3.200 mm Werkstückabmessungen: X = 200 – 3.200 mm (bei zusätzlicher Auflage auch länger möglich) Y = 70 – 920 mm Werkstückdicke: Z = 8 – 70 mm Maximale Bearbeitungslänge auf X-Achse ohne Umspannen: X = 1.500 mm Lodpfx Aboy Ny Uysyohh Z-Achsen-Verfahrweg = 240 mm Maximal programmierbare Geschwindigkeit: Vektorgeschwindigkeit: 68 m/min X = 25 m/min, Y = 60 m/min, Z = 20 m/min Software: CAMPUS V6 – Single Evolution 19-Zoll TFT-Flachbildschirm Höhenverstellbarer Rollentisch zur 4-seitigen Bearbeitung. Komplette Formgebung der Werkstücke durch präzises Fräsen aller vier Seiten möglich. Druckluft-Vakuumsystem Absaugung am Werkzeugkopf 2D Barcode-Scanner Bohraggregat 7883, 15 Spindeln, 1,7 kW Leistung (9 vertikal, 6 horizontal) Performance-Paket, bestehend aus: 7830 Fräsaggregat 6,5 kW (S6) HSK F-63 Werkzeugwechsler 7887 mit 6 Werkzeugplätzen (Pick-up-Typ) Manuelle Schmierung, kombinierter Schmierversorgungspunkt

Condition: good (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, workpiece width (max.): 920 mm, workpiece height (max.): 50 mm, number of axes: 3, actuation type: electric, overall weight: 820 kg, Equipment: CE marking, Drilling machine, compact CNC machining center Vitap Point 2, year 2013, machine is operational and ready for inspection. It has been with our company since new, operated on a single shift as an auxiliary machine, and has not been in use for the past 5 years. Comes with a new toothed drive belt installed, plus one spare. TECHNICAL SPECIFICATIONS Drilling and milling unit - Number of independent vertical spindles: 8 - Number of horizontal spindles on X axis: 4 - Number of horizontal spindles on Y axis: 2 Lsdjy Nyqhspfx Abyohh - Saw unit – diameter: 100 mm - Milling head: 3.6 kW ISO 30 – 12,000/24,000 rpm - Spindle rotation speed: 3,600 rpm - Saw rotation speed: 7,000 rpm - Maximum horizontal drilling depth (X and Y axes): 30 mm - Maximum vertical drilling depth: 45 mm - Maximum horizontal tool diameter: 12 mm - Maximum vertical tool diameter: 35 mm - Number of controlled axes: 3 - Motor power: 1.5 kW Workpiece specifications - Maximum panel thickness: 50 mm - Maximum panel weight: 25 kg - Maximum panel size: X 1,100 mm, Y 50 mm - Minimum panel size: X 270 mm, Y 150 mm, Z 12 mm - Panel feed speed: 25 m/min MACHINE PARAMETERS Electrical data - Rated voltage: 400 V - Frequency: 50 Hz - Rated current: 21.1 A - Total power: 6.4 kW Air pressure: 7 bar Weight: approx. 715 kg

Condition: used, machine/vehicle number: 008527, X axis working area: 6000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Lhsdpfx Aboy Nx Ufeyoh Main Electrospindle power: 15 KW Number of controlled axes: 5 axes Maximum edge height: 65 mm Total number of drilling spindles: 21 Total number of tool changer positions: 77

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, operating hours: 12,666 h, power: 12 kW (16.32 HP), MACHINING CAPACITIES: - X-axis (U) vertical milling travel: 3875 mm, 3170 mm between stops - Y-axis (V) milling travel: 1390 mm between stops, for drilling: 1201 mm - Z-axis (W) milling travel: 290 mm Maximum workpiece height (thickness), effective travel: 110 mm For further details, see aggregate travel schematic - Maximum traverse speeds: X-axis (U): 60 m/min Y-axis (V): 50 m/min Z-axis (W): 20 m/min MACHINE CONFIGURATION: - Worktable with 6 mobile support beams, equipped with several vacuum pods and pneumatic clamps 2 pneumatic connections per beam for clamps, usable capacity ranging from 44 to 78 mm 6 rear stops 6 intermediate stops 3 right lateral stops 3 left lateral stops 4 lifting blades (for loading/unloading assistance) Table divided into 2 working zones - Becker VTLF vacuum pump 250 m3/h, 5.5 kW with air filter - Pfannenberg cooling unit 1.7 kW - Chip conveyor belt - X-axis movement by rack and pinion, Y & Z axes by ball screw and bearing block (high-precision linear guides with automatic lubrication) - Aggregates on swan-neck, composed as follows: • 12 kW HSD milling/routing unit - Toolholder type: HSK 63 F - Variable spindle speed 6000 - 24000 rpm - Inverter-controlled - Surround extraction hood Ledsy Nb Tkopfx Abyjhh - Onboard tool magazine with 10 stations + additional 12-station magazine • 11-spindle drilling unit, 1.7 kW - Center distance between spindles: 32 mm - Spindle speed: 4000 rpm - 11 vertical spindles (8 along X, 3 along Y) - 2+2 horizontal spindles on X - 1+1 horizontal spindles on Y • Control panel - Windows PC - Network card and Ethernet connection - Software: Masterworks and user manual - DXF conversion and direct execution of ISO, TLF, DXF - Pre-programmable zones - Remote control OTHER FEATURES: - Overall electrical supply: 400V, 3Phases+N+E, 50Hz Nominal current: 58.6A, 46.6 KVA - Pneumatic supply: 7/8 Bar - Average consumption: 100Nl/min - Extraction Lower port Ø120 mm, upper port Ø250 mm Recommended flow rate: 6500 m3/h at 20 m/s - CE certified, safety zones and protective grille Lockable isolator, emergency stops Operating footprint: see schematic Transport dimensions: to be specified during equipment preparation Estimated total weight: 2400+350+350 kg Please contact us for supply of consumables, accessories and/or extraction systems. Original documentation, manual, spare parts list, electrical and pneumatic diagrams, service keys, software and license keys included.

Condition: used, Year of construction: 2019, functionality: fully functional, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 80 mm, workpiece length (max.): 99,999 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 50 mm, workpiece weight (max.): 40 kg, number of axes: 3, number of slots in tool magazine: 4, controller manufacturer: TPA, actuation type: electric, total height: 2,140 mm, total length: 3,080 mm, total width: 1,610 mm, overall weight: 1,515 kg, year of last overhaul: 2025, feed rate X-axis: 25 m/min, milling spindle speed (max.): 3,600 rpm, saw blade speed: 7,000 rpm, Equipment: CE marking, documentation/manual, Technical Data - Number of independent vertical spindles: 12 - Number of independent horizontal spindles on X-axis: (2+2) - Number of horizontal drilling spindles on Y-axis: (2+2) - 1 saw blade (Ø 100 mm) - 5 kW electrospindle with ISO30 taper (12,000-24,000 rpm) - Max. workpiece weight: 40 kg - Max. workpiece dimensions: X unlimited / Y 1,250 mm / Z 50 mm - Min. workpiece dimensions: X 270 mm / Y 150 mm (70 op) / Z 3 mm - Feed speed: 25 m/min - Spindle speed: 3,600 rpm - Saw blade speed: 7,000 rpm - Max. horizontal tool Ø: 12 mm - Max. horizontal drilling depth on X and Y axes: 35 mm - Max. vertical drilling depth: 43 mm - Max. vertical tool Ø: 35 mm - Motor: 1.7 kW - Adjustable zero point for four-sided sizing - CE compliant The DDT Feed System: Double Dynamic Transport Two clamps ensure continuous workpiece transport. The operator feeds the workpiece up to the stop. Both clamps grip the workpiece and position it precisely. During machining, the clamps communicate with each other so that clamp #2 holds the workpiece before clamp #1 releases it. This ensures a constant feed rate even during linear milling operations. - Laser measurement for detection of workpiece start and end. - Measured values can be incorporated into and used to adapt the respective program. Lodpfx Abjy Id Rieyjhh - Side stops with rollers, consisting of a fixed and a movable part, equipped with a mechanical digital indicator for automatic alignment to the zero stop, allowing a material removal of 1 mm up to 3 mm along the zero line. - Constant lateral pressure device for precise positioning at the zero line. - Automatic four-position tool changer - Adjustable zero point - No limitation on workpiece length Peripherals and additional features - LCD-TFT monitor - Industrial PC - User interface WSC with list mode, parametric tooling, and parameterizable setup - USB port - Storage of all files - Macro programming - Import of DXF files possible

Condition: excellent (used), Year of construction: 2023, I sell the throughfeed CNC drilling machine HOMAG Weeke Drillteq V-200 (BHX 055), Year 2023. Configuration: 1pc. milling head with tool change 4 positions HSK63 13 + 4 + 2 pcs. drilling units 1pc. grooving saw Lhjdpfxey Hfp Rj Abyjh Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. With full documentation and CE. Very good condition. Available immediately.

Condition: good (used), Year of construction: 2018, machine/vehicle number: AB00004121, functionality: fully functional, operating hours: 5,581 h, power: 8 kW (10.88 HP), input voltage: 400 V, input current: 65 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 1,900 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,050 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 95 mm, workpiece weight (max.): 50 kg, number of axes: 6, number of slots in tool magazine: 6, controller manufacturer: NUM, actuation type: pneumatic, total height: 2,450 mm, total length: 4,680 mm, total width: 2,225 mm, overall weight: 2,343 kg, table length: 1,350 mm, Equipment: CE marking, documentation/manual, We are offering this well-maintained Morbidelli CX200 vertical woodworking centre, year of manufacture 2018. Manufacturer: Morbidelli Model: CX200 Year of manufacture: 2018 Condition: good Category ID: 2502 Type ID: 4257 Lhedpfsy E N E Hex Abyeh Machine type: Vertical woodworking centre If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-11-2614, functionality: fully functional, Processing support bottom Processing support top Workpiece length: min. 250 – max. 3000 mm Workpiece width: min. 70 – max. 1000 mm Workpiece thickness: min. 8 mm – max. 80 mm Workpiece stacking: max. 2 pieces Equipment: DOWEL INSERTION STATIONS x 2 VERTICAL DRILLING UNIT 2V38 HIGH SPEED 7500 HORIZONTAL DRILLING UNIT 2H8X/2Y Lodey Ezgiepfx Abyehh GROOVE SAW UNIT N2 X-Y 90 MILLING UNIT F2-ETP-6 kW CONTROL SYSTEM: POWERCONTROL WITH POWERTOUCH BARCODE READING SYSTEM ENERGY SAVING FUNCTION