Omar Stinchetti

Condition: used, Year of construction: 2013, Technical Specifications - Control: Fanuc - Slide traverse travel: 670 mm - Max. turning diameter: 420 mm - Max. cutting length: 2125 mm - Bar capacity: 102 mm - Tailstock taper: MT #5 - C-axis: 0.001° - Number of turret stations: 12 Casdox Diqdjpfx Addoa - Tailstock travel: 120 mm - Rapid traverse (XYZ): 30 x 10 x 30 m/min - Spindle speed: 2800 rpm - Spindle motor power: 22/18.5 kW - Spindle bore: 115 mm - Spindle nose: A2-11 Series - C-axis milling speed: 5000 rpm - C-axis milling motor power: 7.5/5.5 kW - Y-axis travel: ±65 mm - X-axis travel: 293 mm - Z-axis travel: 2190 mm - Coolant pump pressure: 70 bar - Machine dimensions (L x W x H): 6443 x 2280 x 2315 mm - Machine weight: 11,500 kg

Condition: good (used), Year of construction: 2004, Mazatrol control, 77 mm spindle bore, sub spindle, driven tools, chip conveyor, chuck on both spindles Caedpfjx Dh Axex Addea

Condition: ready for operation (used), Year of construction: 2010, Movement X-Axis Movement 3000 mm Y-Axis Movement 600 mm Caedpjx Dd Tgofx Addsa Z-Axis Movement 800 mm B-Axis Movement ±105° C-Axis Movement 360° Additional Equipment Turning Package: Enables high-precision turning operations in combination with standard milling, facilitating turning and milling in a single setup. This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us. Application Types Milling

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of axis 3 Spindle Speed 3000 RPM Spindle motor power 18.5 kW Movement X-Axis Movement 230 mm Z-Axis Movement 1130 mm This DMC DL 30 M turn-mill centre was manufactured in 2005. It features a max turning diameter of 400 mm, a max swing diameter of 610 mm, and a max turning length of 1080 mm. The spindle supports speeds up to 3000 RPM with a power of 15/18.5 kW. It includes a 12-position motorized tool turret. Consider the opportunity to buy this DMC DL 30 M turn-mill centre. Contact us for more information. Cedpjx Dd Rrofx Addsaa Application Types Turning

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, turning length: 1,540 mm, turning diameter: 660 mm, spindle motor power: 30 W, spindle speed (max.): 3,000 rpm, spindle bore: 102 mm, travel distance X-axis: 630 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 1,585 mm, rotational speed (max.): 12,000 rpm, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Used ​​7-axis CNC multitasking Turning Center with orientable upper head equipped with tool changer opposing spindles and Fanuc 31i-B5 Cedpjx Dc E Iefx Addoaa

Condition: used, Year of construction: 2004, functionality: fully functional, turning length: 1,020 mm, Mazak Quick Turn Nexus 350m CNC turning center with Mazatrol 640T Nexus CNC control, max. swing diameter 750 mm, standard machining diameter 336 mm, max. machining diameter 420 mm, bar capacity 102 mm, maximum spindle speed 4,000 rpm, 12-position tool turret, Kitagawa power-operated 3-jaw chuck, tailstock, machine weight 7,500 kg. Includes various turret-mounted tool holders, driven tool holders, and sleeves. Casdpfx Adjx Dccyjdja Accessories Chip conveyor Driven tools

Condition: used, Year of construction: 2008, turning diameter: 380 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 77 mm, travel distance X-axis: 230 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 575 mm, total height: 1,680 mm, total length: 2,848 mm, total width: 1,860 mm, overall weight: 5,400 kg, CNC Lathe with Y-axis, driven tools, sub spindle and Gantry Loader Csdox Dcbpjpfx Addjaa CNC Control Mazatrol Matrix Nexus Turning diameter 276 / 380 mm Spindle bore diameter 77 mm Spindle speed 4000 R/min Spindle motor 26 Kw Movement X-axis 230 mm Movement Y-axis 100 mm Movement Z-axis 575 mm Movement W-axis 585 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper Mazak VDI Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 4.500 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2009, functionality: fully functional, Travel - X axis: 630 mm Travel - Y axis: 765 mm Travel - Z axis: 600 mm Control: MAZATROL Matrix Spindle speed: 18,000 rpm a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. workpiece height: 500 mm Number of tool changer stations: 120 Tool holder: HSK 63T Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Swing diameter of workpiece: 730 mm 5-axis simultaneous machining center | MAZAK - Variaxis 630-5X II T equipped with turning function (rotary table) Casdpfx Aex Db D Ajddja The machine is in well-maintained condition and can be inspected under power at any time at the factory location. Machine videos from the factory location can be provided upon request. ----- #Tags: Variaxis6305XIIT | Variaxis 630 5X II T | Variaxis-630 5X II T

Condition: excellent (used), Year of construction: 2016, MAZAK Integrex i-300 1000U Max. machining diameter: 658 mm Max. machining length: 1,010 mm Max. main spindle speed: 4,000 rpm Max. bar diameter: 80 mm The machine is equipped with: - Mazatrol SmoothX CNC control - SCHUNK three-jaw chuck, diameter 254 mm - Tool Eye - C-axis - Y-axis - Number of tool positions: 110 !!! - Tailstock - Reinforced coolant pump Cjdpfx Adox A Ub Eodjaa - Chip conveyor

Condition: used, Year of construction: 1987, operating hours: 80,678 h, functionality: fully functional, Description follows Caedpfx Aox A Hl Asddoa

Condition: good (used), Year of construction: 2012, functionality: fully functional, Description follows Codpfox A Hdfox Addeaa

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 1,540 mm, turning diameter: 660 mm, Still under power Swing over crosslide: 660mm Turning length: 1540mm Spindle bore: 91mm Main/sub spindle speed: 4000/5000rpm Tool magazine: 76 positions Taper in milling spindle: Capto C6 Milling spindle speed: 12000rpm Spindle motors: 26/22kW Max power supply: 200V/255A Year of manufacture: 2013/9 Length: 5825mm Width: 2850mm Height: 2750mm Weight: 15860kg Full B-axis Cajdpex A E U Nofx Addsa Coolant through milling spindle 70Bar Knoll 110/700 Part picker & outfeed belt aut. presetter for lower turret & milling spindle Robot interface (no robot), automatic door & prepared for barfeeder Spindle 2 tailstock function Renishaw OMP60 probe MAPPS-IV CNC 5-axis simultaneous control 5 extra M-codes

Condition: used, functionality: fully functional, Dimensions (length/width/height) 2500 × 1450 × 1700 mm X-axis 221 mm Z-axis 590 mm Turning length 590 mm Swing diameter over bed 425 mm Spindle speed up to 4,500 rpm Spindle bore 65 mm Machine weight approx. 3,800 kg Additional information: - Siemens Sinumerik CNC control - Precision guides Cjdpfxox A E Ams Addeaa - Compact design

Condition: good (used), Year of construction: 2003, driven tools, Y-axis, B-axis TRAUB TX8 H control Turning diameter max 275 mm Turning length -450 mm Spindle speeds 5'600 rpm Turret head 12 driven positions Barloader Piece catching device Caodpfx Adex A Evmjdoa Misc. accessories MARCELS MASCHINEN CH

Condition: excellent (used), Sub-spindle, Y-axis, C-axis FANUC 18i-TB control Turning diameter max 250 mm Turning length -555 mm Chuck Diameter -165 mm Main-spindle speeds 50-4'500 rpm Sub-spindle speeds 5'000 rpm Turret head 1+2: 24 positions with 12 driven positions each Codox A Eupepfx Addsaa Tool presetting device Barloader Piece catching device Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2005, turning diameter over cross slide: 430 mm, turning diameter: 600 mm, spindle bore: 65 mm, rotational speed (max.): 5,000 rpm, feed length X-axis: 270 mm, feed length Y-axis: 100 mm, feed length Z-axis: 750 mm, High-pressure pump for both tool changers. Chip flushing for main and counter spindle. The tool changer for the counter spindle is as new, replaced about 2 years ago. Cajdpex A Dnhsfx Addsa

Condition: used, Year of construction: 2010, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2010 Control : Siemens 840 D Turning diam. : 900 mm Casdpex Axylefx Addoa Turning length : 6500 mm In General: Year of manufacture:2010 Control system:Siemens 840 D Rotation diameter:900 mm Turning length:approx. 6,500 mm Spindle bore:245 mm Tool holder:Capto C 8 Spindle: Speed:1,600 rpm Torque:4,472 Nm C-axis:3,000 Nm Spindle boaring:265 mm Chuck:3-Jaw chuck Tool carrier (X/Y/Z): Technology:Swivel head with milling spindle Speed:6,000 rpm Power:30 kW Tool holder:Capto C 8 Torque:315 Nm X-axis:920 mm Y-axis:500 mm (-200/+300 mm) Z-axis:6,870 mm Tailsstock: Quill diameter:180 mm Quill stroke:200 mm Equipment: Tool magazine:72 stations Chip disposal:Chip conveyor Coolant supply:Internal coolant system Coolant temperature control:Immersion recooler Steady rest:2x SMW Autoblock Lynette

Condition: ready for operation (used), Year of construction: 2004, General Data Measurements width 2700 Measurements depth 1450 mm Measurements height 1720 mm Main Drive Spindle speed range 67 - 5000 Spindle motor power 3.7 - 5-5 kw Movement X-Axis Movement 142 mm Z-Axis Movement 250 mm Turret Number of turrets 2 Additional Equipment Bar loader: LNS Hydrobar MiniSprint Tool holders: Standard fixed and 2 driven tool holders Csdjx Aw Iuepfx Addeaa This 4-axis MIYANO BNJ 42S lathe was manufactured in 2004, featuring dual turrets and a Fanuc 18iT control for precision turning operations. It has a bar passage capacity of 42 mm and spindle speeds up to 5000 rpm. Equipped with a LNS Hydrobar MiniSprint bar loader and both standard fixed and motorized tool holders, this machine optimizes productivity. Consider the MIYANO BNJ 42S machine we have for sale. For more information about this lathe, please reach out to us. Application Types Turning

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, A used CNC turning center with driven tools, Fanuc control Csdpfxsx Av S Es Addjaa

Condition: used, Year of construction: 2004, max. working diameter 610 mm max. working lenght 1.522 mm travel -x axis 740 mm travel -y axis 410 mm travel -z axis 1.838 mm control MAZATROL Fusion 640M Pro b-axis 240 ° c-axis 360 ° number of spindle speeds 4.000 U/min spindle bore 88 mm milling spindle turning speed range 12.000 U/min numbers of positions in the tool changer 80 CNC Turning- and Milling Center | MAZAK - INTEGREX E-410H The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. Cajdpfxsx Avr So Addoa The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: INTEGREXE41H | INTEGREX 410H | INTEGREX-E410 H

Condition: good (used), Year of construction: 2019, functionality: fully functional, HYPERTURN 65-1300 (SM2Y2) DUOTURN with 2 turrets including milling drive and 2 Y-axes High-productivity CNC turning/milling center for complete machining of turned and milled parts with 1300 mm spindle distance Integrated spindle motors (ISM) on the main and sub-spindle (liquid-cooled), preloaded roller guides. Drive power: Main spindle – 29 kW, Sub-spindle – 29 kW Speed range: Main spindle: 0 - 5000 rpm Sub-spindle: 0 - 5000 rpm Spindle interface (DIN 55026): Main spindle: KK 6 (Max. bar capacity ø 77 mm) Sub-spindle: KK 6 Y-axis on both turret slides: • Travel range: +/- 50 mm Includes: • Hollow clamping cylinder incl. draw tube • Parts ejector and flushing through the sub-spindle • Sinumerik 840D-sl/OPERATE control system o emcoNNECT/app-based user interface o 22" multi-touch display o IPC with 240 GB o SHOPTURN dialog programming o USB interface o Network drive/Ethernet o 3D simulation and more • 2x 12-position BMT tool turrets, mounted radially with direction logic for up to 2x 12 driven tool stations! Swing speed adjustable with feed override switch. o Performance data: o Max. 6.7 kW at 2650 rpm o Constant torque: 25 Nm o Speed range: 0-5000 rpm o C-axis for main and sub-spindle o TRANSMIT software for easy C-axis programming • Chip conveyor Chip conveyor 2 pcs. high-pressure pumps with 14 bar 2 pcs. coolant pumps with 3.7 bar • Control cabinet cooling unit • Hydraulic power pack • Machine light • 230 V socket at control panel • 5 pcs. leveling elements • Documentation MT65/HT65 BigBore77-LEFT Bar capacity 3 inches (ø76.2 mm) instead of ø65 mm (main spindle). Draw tube connection: M85 x 2 Spindle interface (DIN 55026): A2-8 Max. speed: 4000 rpm Max. torque: 250 Nm Max. power: 29 kW Max. chuck size: ø250 mm MT65/HT65 BigBore77-RIGHT Instead of the 65 mm sub-spindle, the 76 mm sub-spindle with spindle interface KK8 incl. parts ejector is installed. Draw tube connection: M85 x 2 Spindle interface (DIN 55026): KK8 Max. speed: 4000 rpm Max. torque: 250 Nm Max. power: 29 kW Max. chuck size: ø250 mm BMT turret (top right) with direct drive for HT65DT/HT65TT/MT65 The VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface. Max. speed: 12000 rpm Max. drive power: 10 kW Casdpfx Adjx Auyzedsa BMT turret (bottom) with direct drive for HT65-DT/-TT/HT65PM The VDI30 standard turret is replaced by a BMT turret with BMT55P precision interface. Max. speed: 12000 rpm Max. drive power: 10 kW Available immediately

Condition: good (used), Year of construction: 2000, Parts shown by hand not come. Caedpfx Asx Atyajddja

Condition: used, Year of construction: 2003, Technical details: Cajdpfox Aq Emjx Addsa turning diameter: 270 mm weight of the machine ca.: 6,5 t max. swing diameter: 590 mm with automatic loading and unloading system G300 with "spindle bore clamping capacity 90mm" in tailstock version *

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127728, Okuma MULTUS B300 5-Axis CNC Turning and Milling Center (2006) Cajdpfx Asx Ap A Djddoa Okuma OSP-P200L controls Renishaw Probe Chip Auger Under maintenance / parts missing Sublocation - Building 3

Condition: good (used), Description: The machine is in good technical condition and can be tested by prior arrangement. Control system – Siemens, including filtration. Bed inclination, bed material, number of guideways: 45°, cast iron, 3 (4 with Y-axis option). WORKING AREA (V1–V4): - Swing over bed: 19.69" - Swing over cross slide: 11.42" - Maximum turning diameter: 7.87" - Distance between centers: 30.71" - Maximum turning length: 19.69" / 15.82" / 20" - Max. unsupported workpiece weight: 35 lb - Max. overhang from spindle face (unsupported): 165" - Max. workpiece weight between centers: 100 lb - X-axis travel: 7.48" - Y-axis travel (option): 3.14" (+/- 1.57") - Z1-axis travel: (specify) - Z3-axis travel: (specify) - Spindle center height above floor: 20.67" / 21.65" / 39.26" (38.77" + 1.18") MAIN SPINDLE: - Spindle nose (flat type): FL 140h5 - Chuck diameter: 6.69" (optionally 8.26") - Bar capacity: 2.01" - Spindle bore: 2.87" - Guide bush diameter: 2.05" - Inner diameter of front bearing: 3.94" - Spindle bearing lubrication: grease - Max. power (100/40% duty cycle): 20.82 / 36.20 kW Cedpfx Adjx Apkzjdeaa - Speed range (100% duty cycle): 6000 rpm - Speed range (40% duty cycle): 6000 rpm - Rated speed: 1500 rpm - Max. torque (100/40% duty cycle): 93.72 / 125.46 ft*lb - Voltage type, number of ranges: AC/1 - Motor type: ISM52