Van der Spek Heftrucks B.V.

Condition: used, mileage: 2,25,000 km, power: 390 kW (530.25 HP), first registration: 03/2019, fuel type: diesel, empty load weight: 8,223 kg, maximum load weight: 9,777 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, hydraulics, immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: inbound / in transit, ClassicSpace, Mercedes PowerShift 3, company-owned body, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, PTO (power take-off), tipping hydraulics, differential lock, fog lights, work lights, beacon, aluminum fuel tank, roof hatch, green emissions sticker. Hnjdpfeyu Utgex Agwei Wheelbase: 3,600 mm This vehicle is a 4x2 drive that can engage hydraulic front axle drive (HAD) when required, thus becoming a 4x4! 7.5 t front axle, rear axle hypoid 13 t with 485 mm ring gear, Hydraulic Auxiliary Drive (HAD), electronic brake system with ABS and ASR, ABS deactivatable, secondary water retarder, disc brakes on front and rear axles, condensate monitoring for compressed air system, front axle stabilizer, smoker's package, residual heat utilization, construction site filter, PSM (parameterizable special module), reversing warning system, ClassicSpace, comfort central locking system, off-road driving program, Mercedes PowerShift 3, axle load measuring system, preparation for toll collection, radio/navigation system, daytime running lights, high-performance engine brake, ESP, lane keeping assist, attention assist, tire pressure monitoring, gearbox oil cooling, refrigerator, Meiller 9-piston pump type 296, MB 131-2c PTO pump. All information without guarantee as the vehicle is inbound! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, intermediate sale and errors excepted!

Condition: used, mileage: 2,99,000 km, power: 390 kW (530.25 HP), first registration: 03/2019, fuel type: diesel, empty load weight: 8,223 kg, maximum load weight: 9,777 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, hydraulics, immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: incoming / in transit. ClassicSpace cab, Mercedes PowerShift 3 transmission, company-owned vehicle, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, sun visor, cruise control, navigation system, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, power take-off (PTO), tipper hydraulics, differential lock, fog lights, work lights, aluminum fuel tank, roof hatch, green environmental badge. Wheelbase: 3600 mm. This vehicle is a 4x2 drive with the option to engage hydraulic front-wheel drive (HAD) when needed, thus transforming it into a 4x4! 7.5 t front axle, rear axle hypoid, 13 t crown gear 485, Hydraulic Auxiliary Drive (HAD), electronic braking system with ABS and ASR, switchable ABS, secondary water retarder, disc brakes on front and rear axle, condensate monitoring for compressed air system, front axle stabilizer, smoker's package, residual heat utilization, construction site filter, PSM, reversing alarm, ClassicSpace cab, comfort central locking system, Offroad driving program, Mercedes PowerShift 3, axle load measurement device, pre-installed for tolling, radio/navigation system, daytime running lights, high performance engine brake, ESP, lane keeping assistant, attention assistant, tire pressure monitoring, transmission oil cooling, refrigerator, Meiller 9-piston pump type 296, MB 131-2c auxiliary drive pump. Hjdpfxjyu Utas Agwoni All information provided without guarantee as the vehicle is still in transit! ACCESSORY DETAILS NOT GUARANTEED. Subject to change, prior sale, and errors!

Condition: used, mileage: 3,15,500 km, power: 390 kW (530.25 HP), first registration: 09/2018, fuel type: diesel, empty load weight: 8,209 kg, maximum load weight: 9,791 kg, overall weight: 18,000 kg, tire size: 315/80R22.5, axle configuration: 4x4, wheelbase: 3,600 mm, brakes: retarder, color: grey, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, hydraulics, immobilizer system, navigation system, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: inbound / in transit, ClassicSpace, Mercedes PowerShift 3, metal cab, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, sun visor, cruise control, navigation system, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, PTO (power take-off), tipper hydraulics, differential lock, fog lights, work lights, beacon, aluminum tank, roof hatch, green environmental badge. Hjdpfx Aoyu Ur Negwjni Wheelbase: 3,600 mm. This vehicle features a 4x2 drive system that can switch on hydraulic front-wheel drive (HAD) as needed, converting it to 4x4! 7.5t front axle, hypoid rear axle 13t ring gear 485, Hydraulic Auxiliary Drive (HAD), electronic braking system with ABS and ASR (ABS can be deactivated), secondary water retarder, disc brakes on front and rear axles, condensate monitoring for compressed air system, front axle stabilizer, smoker package, residual heat utilization, construction filter, PSM, reverse warning system, ClassicSpace, comfort locking system, offroad driving program, Mercedes PowerShift 3, axle load measuring device, pre-installation for toll collection, radio/navigation system, daytime running lights, high performance engine brake, ESP, lane keeping assist, attention assist, tire pressure monitoring, transmission oil cooling, refrigerator, Meiller 9-piston pump type 296, Mercedes-Benz 131-2c PTO pump. All details subject to change as the vehicle is inbound! ACCESSORY DETAILS WITHOUT WARRANTY, subject to change, prior sale, and errors!

Condition: good (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, Travel paths X=2000 mm, Y=1500 mm, Z=1250 mm • Siemens 840 DsL CNC control • NC rotary table for 4-side machining 1250 mm x 1250 mm Hodpfx Aeyu Ur Ajgwoni • Horizontal spindle HSK100 • Spindle 2500 rpm HSK 100, 2200 Nm spindle torque • Approximately 9500 spindle hours • Tool changer system HSK 100 / 40 positions • Chip conveyor • Coolant supply • Internal/external air blow-off device • High-pressure coolant 60 bar for deep hole drilling • Full enclosure • Large interference circle 2300 mm • Double pallet changer • Short delivery time, subject to prior sale • Year of manufacture: 2010

Condition: used, Year of construction: 2010, operating hours: 20,000 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, HDC3000 with 6 axes • Travel paths X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel Hnodpoyu Urvsfx Agwoi • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 40 positions • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large work area diameter 2400 mm • Incl. cleaning gun • Short delivery time, subject to prior sale

Condition: used, mileage: 4,45,000 km, first registration: 11/2017, axle configuration: 4x2, color: other, Year of construction: 2017, Equipment: tail-lift, Front axle: Steering Rear axle: Double wheels GVW: 11.990 kg Tail lift: tail lift Cooling engine: engine driven = Dealer information = Hnedpfx Aoyu Urpegwji Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: A1/000156, functionality: fully functional, input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 16,000 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 300 mm, number of axes: 6, number of slots in tool magazine: 8, controller manufacturer: Routech- Quicklink, actuation type: electric, total height: 3,270 mm, total length: 32,100 mm, total width: 6,250 mm, overall weight: 21,000 kg, table length: 12,000 mm, table width: 1,000 mm, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, Routech OIKOS 12/19x1.25 – CNC 6-Axis Machining Center for Timber Construction For sale is a Routech OIKOS 12 CNC-controlled 6-axis machining center, designed for the precise processing of solid and laminated timber components for structural wood construction. This machine is suitable for the production of structural elements for single-family homes, hall construction, conservatories, carports, garden sheds, playground equipment, as well as general engineered timber construction. It enables complete processing of beams in a single pass – without the need for manual repositioning of the workpiece. Technical Specifications Hnsdpfx Ajyu Upusgwji 6 interpolating CNC axes (X-Y-Z-B-C-A) Routech OIKOS 12 Max. workpiece length: 19,000 mm Max. cross-section: 1,250 x 300 mm Min. cross-section: 50 x 20 mm Max. workpiece weight: 1,250 kg (optionally up to 2,500 kg) Voltage: 400 V / 50 Hz Axis travel speeds: X: 107 m/min Y: 75 m/min Z: 28 m/min Rotary axes: A ±140° B ±180° C ±300° Milling Unit 6-axis special milling head TLT 1 (SCM Group) with: 13 kW continuous power (S1) Inverter power 18 kW Spindle speed up to 18,000 rpm HSK 63E tool holder Liquid cooling Processing in one pass: Milling, sawing, slotting, drilling, profiling, cross-cutting – all sides of the workpiece without re-clamping Tool change system Disc magazine “Rapid 8” with 8 tool positions Max. tool diameter: 360 mm Max. tool weight: 8 kg Additionally equipped with: Motorized saw unit Slotting unit with chain Preparation for adapter units Material Handling C-type buffer zone with 6 conveyor belts and 6 clamping chucks, length 13,500 mm Automatic unloading system 13,500 mm with 6 support beams Automatic waste conveyor for offcuts and chips Continuous processing of multiple workpieces possible. Control & Software CNC with PC Office ROUTECH QUICK-LINK user interface BTL data import from common CAD/CAM systems 3D simulation with collision check Restart after program interruption possible Separate simulation station “SIMOIKOS” for office workstation Safety & Equipment Enclosed safety cabin with Lexan viewing panel Photoelectric sensors at infeed and outfeed 2 extraction ports in the work area Air-conditioned control cabinet, CE compliant Summary The Routech OIKOS 12 is a high-performance CNC machining center for modern timber construction. With its 6-axis technology, high traverse speeds, complete 5-sided processing without re-clamping, and integrated material logistics, the machine is ideal for joineries and timber construction companies engaged in industrial production. Suitable for companies seeking precise, repeatable, and economical solutions for timber joinery processing.

Condition: excellent (used), mileage: 11,75,000 km, power: 338 kW (459.55 HP), first registration: 01/2003, fuel type: diesel, tire size: 385/65R,22,5, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, fuel tank capacity: 1,400 l, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro3, suspension: steel-air, total length: 6,710 mm, total width: 2,500 mm, Year of construction: 2003, Equipment: ABS, cruise control, differential lock, electric window regulation, parking heater, power mirror, traction control, = Additional Options and Features = - 2 beds - 12-speed manual gearbox - Aluminum fuel tank - Heated mirrors - Power brake booster - Comfort driver's seat - Differential lock - Differential lock - High beam - Speed limiter - Hydraulic system - Tipping hydraulics - Air horn on cab roof - Radio/CD player - Beacon lights - Sleeper cab - Sun visor - Auxiliary heater (parking heater) - V.E.B. engine brake - Power take-off (PTO) - Power take-off (PTO) = Remarks = ORIGINAL DUTCH VOLVO NH12-460 (TORPEDO / BONNET / LONG NOSE) GLOBETROTTER ROYAL CLASS 4x2 TRACTOR UNIT WITH MANUAL GEARBOX, VEB ENGINE BRAKE & HYDRAULIC KIT!! 460 HP, EURO 3!! 12+2 SPEEDS MANUAL GEARBOX!! “ROYAL CLASS” EDITION!! VEB ENGINE BRAKE!! 700+700 LITER DIESEL TANK!! FULL CABIN SPOILER KIT!! P.T.O.!! TIPPER HYDRAULICS!! 2x DIESEL TANK!! LEATHER SEATS!! AIR CONDITIONING!! ETC!! ORIGINAL DUTCH (COLLECTOR’S ITEM) TRACTOR UNIT IN GOOD DRIVING CONDITION, READY FOR HEAVY TIPPER JOBS!! MORE VOLVO (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, TRANSIT REGISTRATION, LOADING, STACKING OR TRANSPORT?? NO PROBLEM FOR US, WE ARE AN “ONE STOP SHOP” COMPANY!! PLEASE CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) YOU CAN ALSO CHECK OUR WEBSITE; ENGEL TRUCKS: “YOUR GLOBAL TRADING PARTNER” = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 12,130 cc Hnjdpfx Agoyu Uphowji Transmission Gearbox: SR1900 (12+2 GEARS MANUAL), 12 speeds, manual gearbox Axle configuration Brakes: drum brakes Front axle: Tire size: 385/65R 22.5; Max. axle load: 7,100 kg; Tire tread left: 20%; Tire tread right: 20%; Suspension: leaf spring Rear axle: Tire size: 315/80R22.5; twin tires; differential lock; Max. axle load: 11,500 kg; Tire tread left inner: 20%; Tire tread left outer: 20%; Tire tread right inner: 20%; Tire tread right outer: 20%; Reduction: single reduction; Suspension: air suspension Weights Unladen weight: 8,010 kg Payload: 10,590 kg gross vehicle weight: 18,600 kg Functionality Cargo volume: 1,400 l Load platform height: 120 cm Condition Technical condition: very good Visual condition: good Identification Registration number: BN-JD-90 Further information Please contact the Sales Department or Erik Engel for more information.

Condition: good (used), Year of construction: 2005, EMCOTURN 345/II TCM "BAR": Hjdsyu Un Repfx Agwsni 2-axis CNC lathe, 13 kW drive power, spindle speed range 60–6300 rpm, linear guideway system, digital drive system, includes: * 12-position VDI 30 axial tool turret with directional logic, for up to 6 driven tools, torque 16 Nm, speed range 0–5000 rpm * C-axis * Mechanical spindle brake * TRANSMIT software for easy C-axis programming * Quill tailstock - Quill diameter: 60 mm - Quill travel: 120 mm - Morse taper: MK4 - Max. quill force: 5000 N * Spindle head size 45 with KK5 spindle interface (DIN 55026) * Hollow clamping cylinder incl. draw tube * EMCO standard bar feeder interface * Coolant pump 3 bar * Fanuc 21i * Machine light for work area * Hydraulic power unit * Interface for foot switch and chip conveyor * Swing-out measuring tool tray * Integrated step-up transformer for 3x230, 3x400, or 3x480 Volt - 50/60 Hz * Documentation

Condition: used, Year of construction: 2016, operating hours: 13,109 h, Type of fuel: Electric Empty weight: 3.300 kg Dimensions (LxBxH): 304 x 106 x 214 cm Lifting capacity: 1.600 kg Lift height: 480 cm Clearance lift height: 170 cm Fork dimensions: 1.140 x 940 mm - Year: 2016 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: FN523204 - Operating hours: 13109 - Lifting capacity: 1600kg - Lifting height: 4800mm - Overhead clearance: 2140mm - Free lift: 1700mm - Fork length: 1140mm - Maximum fork width: 940mm - Minimum fork width: 250mm - Number of wheels: 3 Wheels - Attachment: 4th valve to fork carriage, Side-shift - Options: Half cabin, Non-marking tires, Free-lift, Work lights - Mast: Triplex - Inspection valid until: 04-2026 - Drive: Electric - Brand/Type: 5 PZS 625 - Battery year of construction: 2017 - Capacity: 625Ah - Battery voltage: 48V - Transport dimensions: 3041mm x 1060mm x 2140mm (l x w x h) - Transport weight [kg]: 3300kg Hedpfx Aeyu Un Dsgwjni - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2007, operating hours: 11,909 h, Type of fuel: Electric Empty weight: 12.000 kg Dimensions (LxBxH): 400 x 200 x 292 cm Lifting capacity: 9.000 kg Lift height: 352 cm Fork dimensions: 2.390 x 2.030 mm - Year: 2007 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: T322080213 - Operating hours: 11909 - Lifting capacity: 9000kg - Lifting height: 3520mm - Overhead clearance: 2910mm - Free lift: 0mm - Fork length: 2390mm - Maximum fork width: 2030mm - Minimum fork width: 730mm - Number of wheels: 6 Wheels - Attachment: Fork positioner, Side-shift - Options: Work lights, Half cabin - Mast: Duplex - Drive: Electric - Brand/Type: 10 EPZS 1550 SC - Battery year of construction: 2016 - Capacity: 1550Ah - Battery voltage: 80V - Transport dimensions: 4000mm x 2000mm x 2920mm (l x w x h) Hodpfx Agsyu Unkewsni - Transport weight [kg]: 12000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Hnjdpfxjyu Unde Agwei Delivery time: immediate

Condition: good (used), Cantilever racking, heavy-duty racking, single-sided cantilever racking, pallet racking -Cantilever rack: two-sided, height 4000 mm -Stands: 5x 340/150/H4000 mm / 350/300/3400 mm -Cantilever arms: 70 pieces 140/140/1500 mm -Cross braces: 124 pieces 60/40/1350 mm -Submission/Price: complete -Weight: 4100 kg Hnodpoyu Um Tsfx Agwsi

Condition: good (used), Fan filter, fan array, air cooler, control cabinet fan, filter fan -Manufacturer: Rittal, filter fan type SK 3325107 -Fan: 230 V 41 W -Number: 1x fan included -Dimensions: 255/255/H122 mm -Weight: 1.5 kg/pc. Hedpfxeyu Umye Agwjni

Condition: good (used), mileage: 5,38,000 km, power: 279 kW (379.33 HP), first registration: 02/2002, fuel type: diesel, axle configuration: 8x4, fuel: diesel, brakes: retarder, gearing type: mechanical, suspension: steel, total length: 8,400 mm, total width: 2,500 mm, total height: 3,050 mm, Year of construction: 2002, Equipment: air conditioning, differential lock, electric window regulation, power assisted steering, retarder, = Additional Options and Accessories = - Differential lock - Air-suspended seats - Air horn - Rotating beacon - Sun visor - Toolbox - PTO (power take-off) = Further Information = Technical Information Number of cylinders: 6 Gross vehicle weight (GVW): 32,000 kg Axle configuration Suspension: Leaf suspension Hnodpfxsyu Ul No Agwji Front axle 1: Steered; Tire tread left: 50%; Tire tread right: 50% Front axle 2: Steered; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Twin tires; Differential lock; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Reduction: Outboard planetary axles Rear axle 2: Twin tires; Differential lock; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 50%; Tire tread right outer: 50%; Reduction: Outboard planetary axles Functionality Tipper: Rear Condition Technical condition: Very good Visual condition: Good Further information Please contact Andre, Henri or Andre for more information.

Condition: excellent (used), mileage: 5,80,939 km, power: 309 kW (420.12 HP), first registration: 12/2017, fuel type: diesel, tire size: 315/70-R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 5,990 mm, total width: 2,500 mm, total height: 3,380 mm, Year of construction: 2017, Equipment: ABS, AdBlue, air conditioning, airbag, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, power mirror, traction control, = Additional Options and Equipment = - 2-pedal control - Aluminum fuel tank - Rear work lights - Front work lights - Leaf spring suspension - Power brake booster - Differential lock - High beam - Windshield - Low-noise - Speed limiter - Cab - Air conditioning - Refrigerator - Alloy wheels - Air suspension - Air-suspended seats - Sleeper cab - Lane departure warning system - Stability control - Auxiliary heater - Warm-up automatic - Toolbox - Xenon lighting - Central lubrication = Notes = Very nice MAN TGS 18.420 4x2, year of manufacture 12/2017, with only 580,939 km, automatic transmission, Euro 6 with AdBlue, air conditioning, refrigerator, 1 bed, ADR (EXII, EXIII, FL, AT) valid until 03.08.2026, ALCOA wheels, tires 315/70-R22.5 (tread depth: 11 mm, 7/8 mm; R: 12 mm, 7/7 mm), chassis number: WMA08SZZ9JM763248, MAN BrakeMatic, German tractor unit with valid roadworthiness inspection (HU) until 03.08.2026 = Further Information = General Information Suitable material: Chemicals Technical Information Engine displacement: 1 cc Axle Configuration Hnsdpfxeyu Ul Ao Agwji Tire size: 315/70-R22.5 Brakes: Disc brakes Front axle: Alloy wheels; Max. axle load: 7,100 kg; Steered; Tire tread left: 70%; Tire tread right: 75%; Suspension: Leaf spring Rear axle: Twin tires; Alloy wheels; Max. axle load: 11,500 kg; Left tire tread inner: 50%; Left tire tread outer: 45%; Right tire tread inner: 45%; Right tire tread outer: 45%; Suspension: Air suspension Weights Unladen weight: 7,013 kg Payload: 11,587 kg gross vehicle weight: 18,600 kg Maintenance, History and Condition APK (Technical main inspection): valid until 08.2026 Technical condition: very good Visual condition: very good More information Contact Arne Honingh for further information.

Condition: used, This listing is for the Big Neat BC1506 Safety Cabinet The unit is in full working condition and is ready for immediate use The Bigneat BC1506 is a versatile, high-performance ductless safety cabinet designed to provide exceptional protection from hazardous fumes, vapours, and particulates. Built with Bigneat’s signature filtration technology, this unit offers a flexible and cost-effective alternative to traditional ducted fume hoods, making it an ideal choice for labs with limited infrastructure. Key Features & Benefits: Advanced Carbon & HEPA Filtration: Tailored to your specific chemical or biological needs, ensuring recirculated air is purified to the highest safety standards. Ductless Portability: Because it requires no external venting, the BC1506 can be easily moved and installed anywhere in your facility, saving on expensive HVAC costs. Hsdsyu Ulpopfx Agwjni Total Visibility: The 360-degree clear acrylic panels provide maximum light and an unobstructed view of the workspace from all angles. Energy Efficient: Features low-power fans and intelligent airflow monitoring that ensures maximum containment with minimal energy consumption. Durable & Chemical Resistant: Constructed from high-quality materials designed to withstand spills and frequent cleaning in busy laboratory environments.

Condition: good (used), Code: 0332 Brand: SALVADOR Model: SEL/600 - CE Standard Longitudinal panel saw for postformed strips and finished components with roller feed and unloader (SPLITTER) – CE Standard Technical data: Cutting width/REF mm 10–650 Cutting thickness mm 10-60 Crosscutting saw blade diameter mm 350 Scoring blade diameter mm 350 Crosscutting motor power Hp 5,5 Scoring motor power Hp 2 Carriage feed speed mt/min 15 Suction port diameter n° 2 mm 160 each Work surface height 900 mm Workpiece feed right/left Hsdpfx Aoyu Uk Ssgwjni The panel saw consists of a cutting unit composed by 2 aligned blades. One blade scores the material and the other performs the cut Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Roller diameter 80 mm Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Stop guides Compressed air 6-8 atm Weight kg 1900

Condition: used, mileage: 6,49,000 km, power: 155 kW (210.74 HP), first registration: 05/2014, fuel type: diesel, empty load weight: 5,300 kg, overall weight: 7,490 kg, next inspection (TÜV): 12/2026, fuel: diesel, color: red, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 7,950 mm, total width: 2,550 mm, total height: 3,550 mm, loading space length: 6,080 mm, loading space width: 2,430 mm, loading space height: 2,330 mm, Equipment: cruise control, full service history, motor brake, parking heater, retarder, tail-lift, truck registration, Box body 6.08 m internal length, Internal width 2.43 m, Internal height 2.33 m, Tail lift Palfinger 1000 kg, Gross vehicle weight 7.49 t, Payload 2.19 t, 3 seats, Rear axle air suspension, Auxiliary heater, Automatic transmission, Retarder, Engine brake, Cruise control, Roof hatch, 1st hand, EURO 6, Full service history, Last service at 635,000 km in 05/2025, German registration There may be signage/lettering on the vehicles. Mileage according to odometer Vehicle is preferably sold to businesses or for export, Private sale subject to confirmation Sold without warranty Net price for export Net: 10,900 EUR + (19% VAT) 2,071 EUR = Gross: 12,971 EUR The above information is non-binding. Errors, changes, and prior sale reserved! Tel 08026/2188 Hjdpfx Asyu Ukxogwoni

Condition: good (used), Year of construction: 2012, operating hours: 22,500 h, functionality: fully functional, Equipment: documentation/manual, CNC Swiss-type automatic lathe Brand: STAR Model: SR-32J Year: 2012 with: FANUC 32i control Backworking unit Synchronous spindle Driven tools C-axis Oil mist extraction system Fire suppression system FMB TURBO 3-36 bar feeder Hsdpfxoyu Uhwo Agwsni

Condition: good (used), Year of construction: 1991, functionality: fully functional, 4-pocket folding machine with flat pile feeder including cross folding unit Very well maintained, folding rollers like new! Max. format: 460x650mm Electrical connection: 400V/50Hz Weight: 700kg Hjdpsyu Uc Iofx Agwjni

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,340 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses Hnedjyu Uczspfx Agwji 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 2,389 h, load capacity: 2,500 kg, lifting height: 5,500 mm, free lift: 1,520 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 2,450 mm, gearing type: automatic, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16X7X10 1/2, rear tire type: superelastic tires (black), rear tire size: 22X10X16, overall weight: 9,420 kg, empty load weight: 6,920 kg, total height: 2,250 mm, total length: 1,500 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, front guard, lighting, pallet forks, sideshift, 🚜 USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜 Years of experience | In-house service & paint shop | Professional consultancy | Own transport | After-sales support Are you looking for a forklift you can trust? We are an established dealer of new and used forklifts with a long-standing tradition. We serve customers throughout Europe – from small businesses to large international industrial plants. Our forklifts are more than just machines – they guarantee seamless and reliable logistics. ⭐ What sets us apart? ✅ Each forklift undergoes a comprehensive technical overhaul (inspection, testing, filter and oil replacement, refurbishment of key components) ✅ Full safety inspection (UDT) available on request ✅ Own paint shop & workshop – machines perfected both cosmetically and technically ✅ Pan-European transport – provided by our own fleet with trained drivers ✅ Operator training at delivery + on-site machine functionality check ✅ After-sales service & technical support – we are at your disposal after purchase ✅ Opportunity to visit and test the machine at our headquarters – feel free to come! ✅ Hundreds of satisfied customers across Europe – join those who already trust us ✅ Assistance with financing – we cooperate with leading leasing companies ✅ Invoice available in EUR or PLN, according to customer preference 🔹 On offer: COMBILIFT CBE2500 – 4-Way Forklift ✅ Year of manufacture: 2020 ✅ Operating hours: 2339 h ✅ Drive: Electric ✅ Capacity: 2500 kg ✅ Mast: Triplex – 5500 mm ✅ Fork positioner 1400 mm | Forks 1200 mm ✅ Superelastic tyres – 100% condition ✅ Technical condition: Excellent – after major servicing ✅ Visual condition: Clean, rust-free, ready to work ✅ Free lift: 1520 mm Dimensions: Truck height: 2250 mm Total length: 1500 mm Width: 1500 mm Positioner width: 1400 mm Overall height: 2450 mm 🔧 Ideal for: 🏭 Warehouses with narrow aisles 🌲 Wood, steel, and pipe industries 📦 Handling long loads 🚚 Operations both indoors and outdoors Hodoyu Ucuopfx Agweni

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 4,724 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 2,400 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,600 mm, gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,450 mm, total length: 2,300 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜🔧 💼 Years of experience | In-house service & paint shop | Expert consultation | Pan-European transport | After-sales support Looking for a forklift you can rely on? 🤝 We are a reputable European dealer of new and used forklifts. From small businesses to international facilities – our machines ensure dependable and efficient logistics. ⚙️ 🌟 Why Choose FT Logistics Hedjyu Uchepfx Agwjni ✅ Every forklift undergoes comprehensive technical servicing – inspection, testing, oil & filter changes, major component overhauls ✅ UDT certification available upon request ✅ In-house workshop & paint shop – forklifts reconditioned both visually and mechanically ✅ Own transport fleet across Europe 🚛 ✅ Operator training & on-site functional testing upon delivery ✅ After-sales technical support – we’re here for you even after the purchase ✅ Machine viewing & testing available at our headquarters ✅ Financing assistance via top leasing partners ✅ Invoice in EUR or PLN 💶 🔩 AVAILABLE MODEL: COMBILIFT C4000 – Four-way / Multidirectional Forklift / Multidrive System ✅ Year: 2002 ✅ Operating hours: 4,724 h ✅ Drive: GAS ⛽ ✅ Capacity: 4,000 kg ✅ Mast: Duplex – 4,500 mm ✅ Fork positioner: 1,380 mm | Forks: 1,200 mm ✅ Superelastic tyres – 100% ✅ Free lift: 2,400 mm ✅ Condition: Excellent – after major service ✅ Appearance: Clean, corrosion-free, ready for work 📏 Dimensions: Height: 2,450 mm | Length: 2,300 mm | Width: 2,250 mm | Positioner: 1,320 mm | Overall height: 3,600 mm 🚀 Ideal For: 🏭 Narrow aisle warehouses 🪵 Wood, steel & pipe sectors 📦 Handling long loads 🏗️ Indoor & outdoor operations FT Logistics – Quality you can count on. Service you can trust. 💙

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 8,687 h, load capacity: 14,000 kg, lifting height: 4,200 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,450 mm, motor manufacturer: JOHN DEERE, gearing type: hydrostat, fork carriage width: 2,200 mm, fork length: 1,500 mm, fork width: 250 mm, fork thickness: 65 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 400/60-15, rear tire type: cushion tires (black), rear tire size: 465/55-20, overall weight: 30,500 kg, empty load weight: 16,500 kg, total height: 3,200 mm, total length: 3,100 mm, total width: 3,500 mm, color: green, Equipment: CE marking, air conditioning, all wheel drive, cabin, lighting, pallet forks, sideshift, 🚜 COMBILIFT C14000 – 2018 – 8,687 hrs – DIESEL – DUPLEX 4200 mm – FORK POSITIONER – FULLY SERVICED – NEW TYRES Used & New Forklifts with Quality Guarantee – FT LOGISTICS ✅ Ready to work. No compromises. This COMBILIFT C14000 guarantees smooth, reliable, and interruption-free logistics. Fully overhauled both technically and visually, it looks like new and is immediately available for operation. Hnsdpeyu Ucbjfx Agwei 🔧 Technical Specifications: Year: 2018 Operating hours: 8,687 hrs Drive: Diesel Load capacity: 14,000 kg Mast: Duplex – 4,200 mm Fork positioner: 2,200 mm | Forks: 1,500 mm Tyres: Solid (100%) Condition: 5/5 – Major service performed Height: 3,200 mm Overall height: 3,450 mm Length: 3,100 mm Width: 3,500 mm Tyres: Front 400/60-15 | Rear 465/55-20 Full heated cabin Dead weight: 16,500 kg Load centre: 600 mm 🎯 Ideal for: ✅ Very narrow aisle warehouses ✅ Timber, steel & pipe industries ✅ Long goods handling ✅ Indoor & outdoor use FT LOGISTICS – Quality we stand behind. Service you can trust.