5
workpiece diameter:500 mm (min. max)
centre distance:800 mm
max. workpiece length:500 mm
spindle turning speed range:800 1/min
tailstock quill stroke:600 mm
total power requirement:161 kVA kW
ejector:300 mm
draw-off device:35 mm
Leifeld is the world leader in the development and manufacturing of machine tools for chipless metal forming.
Leifeld's high quality and innovative metal spinning machines produce the best results possible for serial production needs.
Metal spinning provides material h...
6
centre distance 770 mm
Bxwpgogvtz
Height of centres 350 mm
weight of the machine ca. 5 t
2
Hydr. Druckfuegezange Fabr. ECKOLD type MZD 35/6 B
Masch.# 1346/2447
with hydraulic power pack type has 550 Masch.# 796/076 and
Balancer Fabr. TECNA built in 1992
Technical data:
Fuegeleistung steel 2 x 2,0 mm
ALU 2 x 2,0 mm
Jvpjdtvr7
VA 2 x 1,25 mm
Projection 60 mm
Pressure 550 bar
Oil flow rate 0,9 l / min.
Weight of unit 35 kg
with
-Druckfuegezange univ. handle for two hand release with safety relays
-Hydraulic hose
-Hydraulic unit has 550
-Balancer (balancer)
used, in very good condition
4
The machine is in good condition. Center height 300 mm, Distance between center 800 mm, Spindel nose DIN 55027 Sz. 4
By8t3vjvwq
11
Flanging machine
Brand: WALTHERSCHEID
Type: MEG-BO-2
with tools for pipe dimensions 6 to 42 mm - see photo
Voltage: 220 volts 50 Hz
Clplxgvi
1.5 kW power
Year of construction: 1994
Machine is in good usable condition
Equipment:
Foot pedal switch
Machine is sold with no guarantee.
9
Trimming machine WMF series M11-46, year 1995, own weight 580kg, electric/pneumatic.
Coscrh9
I have par stc.
5
Technical data:
-maximum thickness VA 3 mm; ST 4 mm; AL 4 mm
-Projection - horizontal 30 mm
-vertically above / below 35 / 30 mm - pressure power max 60 kN
-Opening measure 21 mm
-Clamp width in the workspace including scraper 45 mm
-Functioning acting with single stroke
-Weight approx. 9 kg
-Balancing
-Wall swing arm 3000 mm
Motor unit
Make: ECKHOLD type: has 550-10.11
Machine no.: 762/909 year of production: 1992
G7qy09
-Infinitely variable max working pressure 550 bar
-Drive ...
10
automatic spinning machine 11-8467-11, Typ HF 450/500 ATT
#####
2te083
very less operating hours (13.000 hours)
complete documentation in folders available
machine is recently in operation and can be seen at any time
9
1 very good used spinning machines
LEIFELD brand
with accessories
Bmb0c2xvry
1 x Leifeld 420 very powerful machine
Center height: approx. 425 mm - turning diameter: approx. 850 mm
Tip length approx. 1250 mm
Speed change via powerful gearbox
Power: 5,5 KW
Gear stages 108-148-216-296-399-542-798-1084 revs per min
Accessories: one flange and 2 pressing tools
all pressure benches in the warehouse can be demonstrated and tested
Dimensions approx. Length 2.65 m, width 0.90 m, height 1.3 m
Weight app...
Punching machine STRIPIT
30ton
max 6mm
Dyi8d0l
X1000mm
Y750mm
machine in working condition
control CNC or Manual option
with machine a lot of tools
electric diagram and manual programing books
15
Cut-to-length line
Technical Data
Manufacture REDMAN
Year of Manufacturing 1972
Strip width Max. 2000 mm
Min 600mm (both Mandrels)
Min 150mm (single Mandrel)
Strip thickness 6-13 mm
Coil weight Max. 20 t
Coil- Max. 2150 mm
Min 1000 mm
Speed 10-20 m/min
Working Direction right left
The line consists of:
De coiler Double expanding mandrels
Coil bore range-Ø 460 – 760 mm
Cftpzlj
Drive / braking D.C. motor – Gearbox /Pneumatic Disc brake
Coil lift Hydraulic
Coil opener / pinch roll unit
Teles...
3
Machine comes with a lot of tools accessoriess.
Owkw2
Machine just turn on and work, ready for operation,
Tools from 60 up to 100mm
We can organize transport and loading.
15
LEIFELD Spinning PLB 1800
- Make : Leifeld Germany
- Typ : Leico PLB 1800
- Age : 1974
- No : 8120
- Centre height above gap : 2.300
- Centre height above lower bed : 1.200
- Max. blank / Workpiece Ø : 4.450
- Max. sheet thickness St 37 : 12 mm
- Centre distance upper bed out : 2.000
- Longitudinal slide travel : 2.100
- Lateral slide travel : 500
- Spindle speeds range : 2 – 300
- Spindle head stock : DIN 15
Cpmpamj3
- Spindle power : 75 kW
- Stroke pinole : 1.000
...
6
- Control: Siemens-Teach in programming
Dpkwbxf
- Support force 35kN
- tool changer with two tool places
- max. turning diameter over bed 700mm
- machine can be inspected under power
all data without guarantee
5
Price on request
Gowbk97
8
Leifeld Plb 1800, machine is currently being overhauled, gearbox is being rebuilt. The electrical system will be renewed and the machine will be equipped with a playback control.
Accessories: 10 tank end dies, 4 spinning rollers
Max. Blank diameter: 5000 mm
Max. Material thickness S 235: 25 mm
Main spindle drive: 200 kW
Spindle speeds: 25-150 rpm
Longitudinal support stroke: 2200 mm
Bsklryajhg
Longitudinal support force 300 kN
Cross support stroke: 700 mm
Cross support force: 400 kN
Tailstock st...
14
Slitting line FIMI
Technical Data
Manufacture FIMI ITALY
Year 1990
Strip width Min. 200 mm
Max. 1500 mm
Strip thickness 0.3 – 2.5 mm
Coil weight Max. 15 t
Btz0i98ipg
Coil- Max. 1500 mm
Speed Max. 80 m/min
Working direction Right Left
The line consists of:
Decoiler Mandrel
Cone-Ø 480 – 610 mm
Drive / braking Hydraulic motor
Lifting table Hydraulic
Coil opener / pinch roll unit
Telescopic table Hydraulic
No. of pinch rolls 2
Pinch roll-Ø 400 mm
Driving motor 25 kw
Slitting head
No. of hea...
1/2" X 96" (13mm x 2438mm) Leifeld PLB 1200 Metal Spinning Lathe
The specifications for this lathe are as follows:
PLB-1200
PS 60 C is the Leifeld factory model# of the top slide.
Came with 18.5KW and hydraulic was only 7.5KW
Bought new in 1957. One Owner.
It has a 96 inch swing
50 HP hydraulic system which is only 6 years old and rarely used.
25 HP main spindle drive which was rebuilt and also rarely used.
Has all longitudinal feeds A standard PS 60 slide.
All new seals which were rep...
15
Make Leifeld Ahlen Germany
E29q8v2
Yop
4000mm x 25mm (157.480" x 1") Capacity Leifeld VDM 4000 E Combination Vertical Spinning Lathe
VERTICAL HEAVY DUTY SPINNING / DISHING MACHINE
St. no. : 6212
Make : LEIFELD
Type : VDM 4000 E
Machine no. : 15.307/1/2
Component diameter max. : 3.900mm
Spinning, Steel bottoms : 5 - 25mm
Alu. bottoms : 8 - 30mm
Stainless steel bottoms : 4 - 15mm
Spinning and bend over (flenge)
Steel bottoms : 5 - 12mm
Alu. bottoms : 8 - 15mm
F30cmtj
Stainless steel...
Used Flow forming machines
Completely search Machineseeker and more than 2,00,000 used machines now.This may be of interest to you
Olympic Games: Machineseeker sponsors Team Germany
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
