Sekulić

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, number of axes: 4, This 4-axis TRAUB TNC 65 DG was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system TX8i with 64-bit RISC high-performance processor and additional PLC high-performance processor, integrated PC • TX8i control with 64-bit technology including TFT color flat screen and electronic handwheel • Electrical system according to VDE/EN 60204 • Multi-range transformer for 460V / 400V / 380V / 220V / 200V, 50 Hz • Operating voltage machine 400V 50 Hz Giodpfoy Sg Niox Anxot • Operating voltage accessories 230V 50 Hz • Control voltage 24V DC • Machine equipped with interference suppression set for industrial networks (EMC compliant) • CE conformity declaration and CE marking • Designed for machining metals and plastics with defined cutting edge • Main spindle C-axis (numerically controlled turning and positioning device) • Counter spindle C-axis with speed-synchronous control • Tool drive turret 1: power 3.1 kW, speed 4000 rpm • Tool drive turret 2: power 3.1 kW, speed 4000 rpm • Tool monitoring TX8i with wear and breakage control via axis motor monitoring • Thread cutting without compensating chuck • Software TRAUB Polyform for milling programming with C-axis (front, longitudinal, cylindrical surface) • Network connection preparation with Ethernet interface and RJ45 socket • Z/V axis counter spindle software with defined end position (plan surface transfer) • Maximum clamping diameter up to 60 mm depending on system Additional equipment • Workpiece unloading device with gripper in turret 2 (automation) • Chip conveyor (hinged belt), discharge height 1200 mm • High-pressure coolant system with programmable pressure stages 20 / 5 bar • Preparation for extraction and filter system, connection Ø200 mm, 400V socket • Bar feeder interface preparation DNH 61 • Collet chuck system RÖHM for spindle Ø65 mm • Reducer sleeve for main spindle Ø65 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2022, Tilting Spindle Moulder Manufacturer: SCM Model: NOVA TI 105 Year of manufacture: 2022 Table size: 254 x 85 cm Power: 7 kW Tilting: Single-sided 45° Height adjustment: 120 mm Spindle diameter: 30 mm Height and angle adjustment: Electric Left/right rotation: Yes Speeds: 3500/6000/8000/10000 rpm Motor brake: Yes Including feeder Gjdpfsy Sg Ncox Anxjit

Condition: good (used), mileage: 2,040 km, color: blue, lifting height: 34,000 mm, Year of construction: 2014, operating hours: 2,040 h, General information Field of application: Construction Drivetrain Drive: Wheel Make of engine: Honda Weights Empty weight: 3.500 kg Functional Lifting capacity: 1.800 kg CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: good Visual appearance: good Other information Front tyres / undercarriage remaining: 85 Rear tyres remaining : 85 Maximum lifting capacity at end of jib: 100 kg Delivery terms: EXW Latest inspection: 2026-02-03 Production country: DE Additional information Please contact Michael Overmeer for more information Gijdpsy Sg I Ssfx Anxjt Böcker AHK 34/1800 trailer crane construction year 2014 with 2.040 hours from the first owner. Machine is in a nice condition (last inspection and major maintenance at Böcker on 12-2025 (including replacement of the sealing rings on the support legs) and more recent (02-2026) replacement of the sealing ring on the mast cylinder, invoices available) and has among other things: a Honda petrol engine, automatic leveling, wheel drive operable from the remote, hydraulic support legs, hydraulic jib and radio remote control. Changes and typographical errors reserved.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 65,155 h, travel distance X-axis: 750 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 500 mm, table length: 1,350 mm, table load: 550 kg, overall weight: 1,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 22, number of axes: 5, This 5-axis AXA DBZ vertical machining centre was manufactured in 2007. It features an impressive X-axis travel of 2 x 750 mm, Y-axis travel of 500 mm, and Z-axis travel of 600 mm. The machine is equipped with a main spindle speed range of 30–10,000 rpm and a maximum table load of approximately 550 kg. If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. with 2x 4th axis RTA 1-180Automatic doors (possible for robot handling system)Main spindle speed range 30–10,000 rpmMain spindle drive power ~30 kW 40% EDMax. torque ~143 NmTool holder SK 40 DIN 69871 / AInternal coolant supply (water - air)Table clamping surface 2 x 1,350 x 500 mmMax. table load approx. 550 kgNumber of T-slots 3T-slot width 14H9 mmT-slot distance 160 mm4th axis 2 x RTA 1-180Number of tool positions 22 . tool diameter 85 mmMax. tool diameter with free adjacent pocket 135 mmMax. tool length 400 mmTool change time 4.0 secRapid traverse X/Y 25 m/minRapid traverse Z 20 m/minFeed force 9 kNTotal power requirement 55 kVAMachine weight approx. 10.0 tOperating hours: 65155 h Gedpfx Anjy Sg I Eexsit Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 1977, Altendorf F45 Tilting panel saw Scoring unit Tiltable up to 45° Manual height and tilt adjustment with handwheel Sliding table 3200 mm Cutting width 1250 mm Mitre fence Year of manufacture: 1977 Giedpfx Aney Sg Ilsxjt Price: 3500.-

Condition: used, Automatic PVC Corner Cleaning Machine – Urban SV 305, year 2006 The machine performs automatic cleaning of welded PVC corners, including the processing of internal and external gaskets, also on acrylic-coated profiles. Tool holder turret for 3 milling cutter units Cleaning knives Units for internal and external gaskets Unit for angled chamfers Automatic profile recognition system SPS control with intuitive operator panel Soft start and electronic motor brake Technical specifications: Operating pressure: 7 bar Power supply: 230/400 V Installed power: 1.7 kW Spindle speed: 2800 rpm Machine dimensions: 2500 x 2100 x 1700 mm Weight: 570 kg Gjdpey Sg Ifofx Anxeit Machine in working condition, ideal for PVC window and door production lines.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4 was manufactured in 2017. It features an X-axis travel of 1270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine is equipped with a maximum spindle speed of 8,100 RPM and a robust table size of 1321 mm x 495 mm, supporting a maximum weight of 794 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. • Spindle taper: CT 40 • Max torque: 122.0 Nm @ 2000 rpm • Table dimensions: 1321 x 495 mm • Max weight on table: 794 kg • Tool changer: 20 positions (umbrella type) • Rapid feedrate (X/Y/Z): 25.4 m/min • Table to spindle nose (min/max): 107 / 742 mm • T-slots: 5 slots, 16 mm width, 80 mm pitch • Power-on time: 18673:41:20 • Cycle start time: 3974:33:16 • Feed cutting time: 2117:17:34 • Included machine options/features: 15" color monitor, rigid tapping, USB port Gijdpfxsy Sg H Ue Anxst Additional equipment • Programmable coolant nozzle • Auger-type chip conveyor

Condition: new, Year of construction: 2026, The device is designed to cool tubes in CO2 laser plotters thanks to the use of a cooling unit. The CW3000 chiller keeps the water temperature at the right level. Thanks to such cooling, the tube has stable operating parameters. The CO2 chiller ensures optimal working conditions of the tube, effectively protecting it against overheating and damage. The device is intended for people / companies where a laser plotter is an everyday work tool. Gsdpfey Sg H Iox Anxeit Technical data Voltage 230 V Power consumption 0,45 A Cooling efficiency 50 W Container capacity 9 L Connections (inlet/outlet) 10 mm Maximum working height 10 m Maximum flow 10 L/min Weight 9,5 kg Dimensions 49 x 27 x 38 cm Security: - Compressor overvoltage protection - Alarm for incorrect water flow in the system - Over temperature alarm The price is a net price. Price does not include shipping costs.

Condition: new, Year of construction: 2022, functionality: fully functional, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,071 kg, input voltage: 400 V, total width: 2,240 mm, total length: 3,050 mm, total height: 2,500 mm, warranty duration: 6 months, heating capacity: 160 kW (217.54 HP), Aircooled chiller/Heat pump YORK YMPA0160PE50 159 kW/160 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 160 kW / 45.5 tons (40/45 —7°C) Year of manufacture: 2022 Options: Heat pump Refrigerant circuit: 3 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 4 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll, inverter) Type of refrigerant: R410a Number of fans: 3 pcs. (EC-fans) Dimensions: 3.05x2.24x2.5 m. Weight: 2071 kg. Working hours: 0/0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT Gjdpey Sg Huofx Anxjit The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, functionality: fully functional, Limitless hot stamping machine / foil stamping press. Gjdpfxjy Sg Hno Anxjit Industrial hot foil stamping machine suitable for printing and branding applications. Machine details: Manufacturer: Limitless Hot Stamping Machines Model: 360B 240V 1050 watts Industrial production unit Suitable for: foil printing hot stamping packaging decoration leather goods plastics promotional products industrial marking Commercial production machine from operational facility. Sold as seen / untested.

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 480 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 430 mm, controller manufacturer: FANUC, controller model: 0i-MC, total height: 2,323 mm, total width: 1,767 mm, table load: 300 kg, overall weight: 2,820 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 20, tool weight: 6,000 g, product length (max.): 2,168 mm, number of axes: 3, This 3-axis Bridgeport GX 480 was manufactured in 2009. It features an X-axis travel of 480 mm, Y-axis travel of 400 mm, and Z-axis travel of 430 mm. The machine includes a robust table size of 600 x 400 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport GX 480 vertical machining centre we have for sale. Contact us for further details. • Table size: 600 x 400 mm • Spindle nose to table: 150–580 mm Gsdpoy Sg Eqjfx Anxjit • T-slots: 3 x 125 mm • Rapid traverse (X/Y/Z): 36 m/min • Working feed: 12 m/min • Tool magazine: 20 positions (carousel), random bi-directional (shortest path) • Max tool diameter (adjacent/free): 94 / 130 mm • Max tool length: 250 mm • Chip-to-chip time: 5.5 s Additional equipment • Cooling system: 20 bar high pressure • Tank wash: included • Chip conveyor: screw type Technical Specification Taper Size BT 40

Condition: like new (used), Year of construction: 2007, Schöberl Gluing Stand Clamping height: 1900 mm Clamping length: 3000 mm and more Mobile Gisdsy Sg Ekopfx Anxet 6 clamping elements Required space: 3000 x 1000 mm Usable on both sides Heated rail: 3000 mm Year of manufacture: 2007 Price: 7000.- Original price: 13000.-

Condition: excellent (used), Year of construction: 2005, The JAROMA DT-3 copy-turning and milling machine is a professional, cast iron woodworking machine with a copy device, designed for serial production of round, polygonal, and helical components. It uses turning knives or milling cutters (disc/finger) for profile machining based on a template, ensuring high shape repeatability.Main features and specifications:Application: Serial production of parts such as chair legs, balusters, and handles.Construction: Stable cast iron bed.Motor power: 2.2 kW.Dimensions: approx. 225 x 80 x 140 cm.Weight: approx. 300 kg. Giodsy Sg Dtopfx Anxet

Condition: good (used), Year of construction: 1998, operating hours: 385 h, functionality: fully functional, color channels: 8 color, paper weight (min.): 40 g/m², paper weight (max.): 400 g/m², paper width (min.): 280 mm, paper width (max.): 720 mm, paper height (min.): 400 mm, paper height (max.): 1,020 mm, total length: 720 mm, total width: 11,500 mm, total height: 3,200 mm, space requirement length: 13,500 mm, space requirement width: 2,500 mm, space requirement height: 2,500 mm, counter reading (black): 385, counter reading (color): 385, year of last overhaul: 1998, type of input current: three-phase, input current: 200 A, input voltage: 400 V, Equipment: documentation/manual, HEIDELBERG SPEEDMASTER SM 102-8-P OFFSET PRINTING PRESS 8 Colors + Perfecting 4+4 | CPC 1-04 | Autoplate | In Production Year: 1998 Impression Count: 359 Million Availability: Immediate HIGH PERFORMANCE HEIDELBERG SPEEDMASTER 102-8-P AVAILABLE FOR IMMEDIATE SALE This well-maintained Heidelberg Speedmaster SM 102-8-P is currently visible in production and operating in Good condition. Equipped with advanced Heidelberg automation systems, this machine delivers high productivity, stable register accuracy, and premium print quality for commercial printing operations. The machine with complete NEW ink rollers and dampening rollers for all 8 printing units. Ideal for: • Commercial printing • Packaging printing • Magazine production • High-volume offset printing Gjdpey Sg Dmjfx Anxoit • Brochures, catalogs & advertising materials • International print production facilities TECHNICAL CONFIGURATION: • CP Tronic Control System • CPC 1-04 Ink Control • Alcolor Dampening System • Autoplate Semi-Automatic Plate Changing • Auto Blanket Wash • Autoregister • Electronic Double Sheet Control • Electronic Side Lay Control • High Pile Delivery • Sheet De-curler • Antistatic System • Steel Plate in Feeder & Delivery • Super Blue Package • Technotrans Refrigeration & Re-circulation • Weko Powder Spray MACHINE CONDITION: • Machine visible in production • Good mechanical condition • Full new ink rollers will be installed • Full new dampening rollers installed • Clean and professionally maintained dismantling, loading, and shipping assistance can be arranged. Contact us today for: Additional photos & videos Heidelberg SM 102, Heidelberg Speedmaster, 8 color 4+4 offset press, perfecting printing press, used Heidelberg printing machine, commercial printing press, Heidelberg CPC 1-04, offset printing machine , Heidelberg Autoplate, Heidelberg SM102-8P, industrial printing equipment, used offset press for sale, Heidelberg printing machinery, sheetfed offset press, Heidelberg printing machine

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 210 mm, travel distance Z-axis: 450 mm, number of axes: 3, This 3-axis TRAUB TNA 300 horizontal turning machine was manufactured in 2000. It features a spindle diameter of 65 mm and includes a high-pressure coolant system, driven tools with 4 kW power, and an automatic bar change system. The machine is equipped with a chip conveyor and tool monitoring systems for enhanced efficiency. If you are looking to get high-quality turning capabilities, consider the TRAUB TNA 300 machine we have for sale. Contact us for further details. • Spindle diameter: 65 mm • Machine version: without tailstock • Basic configuration: included • Hydraulic hollow clamping cylinder: included • High-pressure coolant system: 12 bar / 3 bar • Control system: TX8H, 32-bit technology; processor latest generation (at time of build); parameter data on diskette • Axes/functions: • C-axis: included (numerically controlled spindle positioning and turning axis) • Y-axis: not included • Driven tools: included; power 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive shutdown after material end: selectable via parameter • Error message via parameter: selectable • Guideway cover: included • Workholding: • Collet clamping system: ROHM • Collet system compatibility: • DIN 6343 size 185E, max diameter 60 mm • DIN 6343 size 48, max diameter 42 mm • Rubberflex series 52 compatible • Rubberflex series 36 compatible Gedpsy Sg Dgofx Anxoit • Fahrion collet FM 1149 MB compatible • Fahrion collet FM 1148 MB compatible • Electrical: • Electrical system according to: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Accessory voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional equipment • Chip conveyor: included • Workpiece removal device: included; via conveyor, left side discharge • Bar feeder preparation: included • Bar feeder: TRAUB DNH 61-3000 (automatic) • Feeding: telescopic pusher system • Bar shapes: round / hexagonal / square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included • Residual piece removal: forward • Central adjustment of bar diameter: included • Stepless feed force adjustment: included • Central magazine adjustment: included • No guide channel change required • No clamping sleeve change required • Short remnant pieces possible • Transverse loading system • Transport weight: approx. 2100 kg Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 6,000 rpm, travel distance X-axis: 81 mm, travel distance Z-axis: 80 mm, spindle motor power: 20,000 W, number of axes: 5, This 5-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm Gisdpjy Sg Daofx Anxjt • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 560 mm, controller manufacturer: FANUC, controller model: Oi-MF Plus, total height: 2,700 mm, total width: 2,710 mm, table load: 700 kg, overall weight: 5,800 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 15,000 W, number of slots in tool magazine: 24, tool weight: 8,000 g, product length (max.): 2,900 mm, number of axes: 3, This 3-axis Neway VM-1150S was manufactured in 2019. It features an X-axis travel of 1000 mm, Y-axis travel of 550 mm, and Z-axis travel of 560 mm. The machine includes a robust table size of 1100 x 550 mm and a maximum table load of 700 kg. If you are looking to get high-quality machining capabilities, consider the Neway VM-1150S vertical machining centre we have for sale. Contact us for further details. Giodpjy Sg A Nofx Anxet • Table size: 1100 x 550 mm • Distance spindle nose to table: 120–680 mm • Rapid feed (X/Y/Z): 36 m/min • Coolant through spindle: 20 bar • Tool magazine capacity: 24 positions • Max tool diameter: 80 mm • Max tool length: 300 mm Additional equipment • Chip conveyor • Remote electronic handwheel Technical Specification Taper Size BT 40

Condition: new, mileage: 4 km, power: 350 kW (475.87 HP), tire size: 315/80 R 22.5, axle configuration: 6x4, wheelbase: 3,600 mm, fuel tank capacity: 940 l, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, = Additional options and accessories = - 2 fuel tanks - Autoradio - CD - Heater - Power windows front - PTO - Sun visor - Tool box - Transportation - Xenon headlights = Remarks = = Additional options and accessories = - Air Suspension Seats - Aluminium fuel tank - Bluetooth - Heater - Leaf spring suspension - Side door - Sleeper cab = Remarks = The Mercedes-Benz Actros 3348S 6x4 is a robust and versatile truck that excels in heavy transport tasks. With a 480hp engine and 6x4 drive, this truck is designed to perform under the most demanding conditions. The Actros 3348S offers unparalleled stability, power and comfort, making it the ideal choice for heavy-duty construction and industrial applications. Specifications of the Mercedes-Benz Actros 3348S 6x4 - Model: Mercedes-Benz Actros 3348S 6x4 - Engine: inline 6, 12.8L, 350kW (476hp), 2300 Nm - Gearbox: Mercedes PowerShift 3 - Maximum speed: 89 km/h (depending on configuration) - Tank: 480 l, left, 735 x 700 x 1100 mm, aluminum - Tank: Second tank, 480 l, right, 735 x 700 x 1100 mm, aluminum - Chassis: Long chassis designed for heavy duty bodies - Towing capacity: Up to 120,000kg (depending on structure and load) Driving behavior and chassis - Axle system: Front axle, straight version 7.5T - Axle system: Rear axle, crown wheel 300, planetary, 13.4T - Braking system: Disc brakes on front and rear axle - ABS (anti-lock braking system) for extra grip and safety Applications The Mercedes-Benz Actros 3348S 6x4 is suitable for applications where high power and versatility are required. - Mining: Transport of raw materials, sand, or heavy construction materials - Container transport: Perfect for long-distance container transport - Semi-trailers: Transport of heavy loads, steel, machines or other goods. - Transport: Transport of machines and building materials - Transport of Specific Loads: Due to the adaptability of the Actros 3348S, various body configurations can be carried out, such as tipper, tank or container body, depending on the specific transport needs. Dimensions: L. 7450mm W. 2500mm H. 3671mm Weight: 9905kg Gedpfxoy Sg Aij Anxsit The Mercedes-Benz Actros 3348S 6x4 combines power, reliability, advanced technology and low operating costs, making it the ideal choice for tough and challenging transport and construction applications. It is an investment that pays off in long-term sustainability and efficiency. This is what Mercedes-Benz has distinguished itself for years in contrast to other brands in the industry. Tractors heads are only available with Semi-Trailer = More information = Bodywork: Standard tractor Tyre size: 315/80 R 22.5 Front axle: Steering = More information = Year of manufacture: 2026 Tyre size: 315/80 R 22.5 Brakes: disc brakes Suspension: leaf suspension Number of cylinders: 6 Engine capacity: 12.800 cc GVW: 33.000 kg Number of berths: 1 Rent kmly price currency: EUR

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, power: 4.4 kW (5.98 HP), cutting height (max.): 2,200 mm, cutting width (max.): 4,300 mm, saw blade diameter: 3,030 mm, total length: 5,400 mm, total width: 1,600 mm, total height: 2,770 mm, overall weight: 800 kg, Equipment: CE marking, scorer, Technical specifications: Manufacturer: Striebig Model: Standard TRK3 5220A Year: 8/95 Feed: manual Construction: automatically retracting wooden slat frame Saw carriage locking: manual Saw unit plunge: manual Motor power: 5.5 kW Giedpfxjy Sgz Eo Anxst Cutting area: 4300 × 2200 × 80 mm Speed: 4750 rpm Saw blade diameter: 303 mm Required space: L × H × W 5400 × 3000 × 1400 mm Mounting: free-standing Location: warehouse Delivery and installation possible by arrangement Price: €11,888 gross, VAT can be stated separately.

Condition: excellent (used), Year of construction: 2012, Weinig H1000 moulder with E3 infeed and A3 outfeed mechanisation Weinig Hydromat 1000 with 5 Spindles. (Year 2012) Separate electrical panel Separate remote control panel Automatic lubrication system for bedplates Memory system Full sound enclosure Weinig E3 moulder infeed +pack scissors lift (3000kg). Weinig A3 drop leaf outfeed + pack scissors lift (3000kg) + pack outfeed chain conveyor. WEINIG HYDROMAT 1000 230X160mm maximum dimension No 1. 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer Gisdpfx Anjy Sgzxjxst No 2. 7.5kw - Right 6000rpm + profile jointer No 3. 7.5kw - Left 6000rpm + profile jointer No 4 . 7.5kw - Top 6000rpm + Outboard bearing + Straight jointer No 5 . 7.5kw - Bottom 6000rpm + Outboard bearing + Straight jointer 50mm spindles Beam 0.55kW Full documentation included. Extraction manifold included. POSSIBLE TO PURCHASE MOULDER OR MECHANISATION SEPARATELY AS NEEDED

Condition: good (used), Weinig Hydromat H23 8 spindle 50mm spindles 6,000 RPM Bottom 7.5kW jointer ready Right 7.5kW straight jointer ready Left 15kW straight and profile jointer ready Right 11kW profile jointer ready Top 15kW jointer ready Bottom 18.5kw jointer ready Gisdpfx Anjy Sgy Uexjt Top 11kw straight and profile jointer ready + outboard bearing Bottom 7.5 kw straight and profile jointer ready + outboard bearing 7.5kW feed motor. Automatic lubrication system. Full heavy duty sound enclosure Possible to supply with moulder infeed and outfeed as needed. Possible to offer tooling if needed.

Condition: new, functionality: fully functional, Year of construction: 2026, Sheet metal folding machine MB-2150 is used to bend metal sheets up to 2150 mm length and 1mm maximum thickness. You can make roofing, ventilation, drainage system elements, windows parts etc. with our sheet metal folding machines. The main difference of our sheet metal folding machine from other brand’s machines is replaceable upper bending bar, so you can change one with standard shape to another one segmented and to use folding machine as segmented bending machine. Or using corrugated shape bar to make corrugated sheet walls and roofing panels. So it allows to wide machine functionality, help to save you money from buying another machines and save your working places. “Standard +” set includes as in standard set sheet metal folding machine, cross cutting knife, alidade, angle limiter and also front cutting limiters, back table, handles, wheels and hand bending tool or shock absorber as an option. front cutting limiters back table handles wheels hand bending tool shock absorber As additional accessories you can also get: 1. Pedals, so it lets to press metal sheet without using sides handles and to make work of one person easier with the machine; pedal mechanism 2. Segmented upper bar, so it allows to bend metal sheets from all four sides and to produce boxes, etc.; segmented upper bar 3. Segmented bending bar, so it allows to bend façade cassettes with the machine; segmented bending bar 4. Corrugated sheets producing tool, so it lets to make corrugated sheets panels for walls and roofing; Gsdpfxsy Sgy Ie Anxsit corrugated sheet tool corrugated panel We produce four models of sheet metal folding machines MB: 1. Sheet metal folding machine MB 1400x1.2mm 2. Sheet metal folding machine MB 2150x1mm 3. Sheet metal folding machine MB 2650x0.8mm 4. Sheet metal folding machine MB3150x0.7mm Weight: 200 kg Dimensions (LxWxH): 260 cm x 70 cm x 110 cm

Condition: new, operating pressure: 150 bar, empty load weight: 164 kg, input voltage: 400 V, warranty duration: 12 months, temperature: 150 °C, KRANZLE THERM CA 12/150 TECHNICAL DATA: Model: KRANZLE THERM CA 12/150 Manufacturer: KRANZLE Country of manufacture: Germany Series: THERM (Professional) Condition: NEW Voltage (Ph/V/Hz): 3 / 400 / 50 Pumping capacity (l/h): 720 Maximum water temperature (°C): max. 80 Maximum steam temperature (°C): max. 140 Operating pressure (bar): 150 Maximum pressure (bar): 150 Connected power (kW): 3.8 / 3.0 Weight with accessories (kg): 164 Fuel tank capacity (l): 25 KRANZLE THERM CA 12/150 WASHER EQUIPMENT KRANZLE pressure gun (M22 / quick connector) Spray lance: KRANZLE (quick connector) 25° flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt removal power. 10m professional-class pressure hose WHY CHOOSE THE KRANZLE THERM CA 12/150 WASHER? The THERM CA 12/150 model is ideal for factories, workplaces, and industrial halls. It is also successfully used in large and small transport companies, automotive repair shops, and in agriculture. It is also used by private customers who value the highest cleaning standards. The THERM line emphasizes smooth operation and continuous operation, making the CA 12/150 model suitable for use in a wide range of industries. Additional handles allow the unit to be transported with additional equipment. The brass pump head extends the unit's service life. A large water filter protects the pump from contaminants that may be present in the water. Standard equipment includes a high-pressure gun with lance, a 10m high-pressure hose, and a 25° power nozzle. The device also features a quick-release attachment system, allowing for 5x faster attachment changes than traditional threaded systems. KRANZLE THERM CA 12/150 RELIABLE | DURABLE | ERGONOMIC Due to its frame, the device can be used in hard-to-reach places or where work often requires different locations. Godpfxjy Sgyue Anxeit Additional handles allow the device to be transported with additional accessories. The brass pump head extends the device's lifespan. It combines efficient water cooling with a robust air cooling system, ensuring maximum cooling efficiency even with fluctuating ambient and water temperatures. Standard includes a high-pressure gun with lance, a 15m high-pressure hose on a reel, and a power nozzle. The device also features a quick-connect accessory mounting system, allowing for 5x faster accessory changes than traditional threaded systems. The device is completely new.

Condition: good (used), Feed speed 10-80 m/min Saw wheel diameter 1050 mm Bandsaw width 130mm Saw motor power 2 x 30 kW Hydraulic feed with centering. 7.5kW hydraulic pump Saw blade lubrication tank 2 x 6l Voltage 400 volts 50 Hz Weight approx. 10,000 kg Godey Sgyhjpfx Anxeit

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM Godey Sgx Rspfx Anxeit SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK