Der Maschinenmakler - Ihr Partner im Bereich Maschinenhandel

Condition: like new (used), Year of construction: 2024, operating hours: 2,200 h, functionality: fully functional, workpiece weight (max.): 850 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,245 mm, total length: 3,445 mm, total width: 2,595 mm, wire diameter (max.): 0.3 mm, type of input current: three-phase, overall weight: 3,684 kg, input frequency: 60 Hz, Equipment: cooling unit, We are offering this Sodick VN 600Q wire EDM machine, year of manufacture 2024. Manufacturer: Sodick Model: VN 600Q Year: 2024 Condition: like new The machine currently has 1,137 hours of cutting time and approx. 2,200 operating hours. • 10-year warranty on positioning accuracy • Linear motors (X, Y, U, V axes) • Absolute linear glass scales (X, Y, U, V axes) • Ceramic components • LN3W generator • Remote control • Enhanced operator-friendliness • Energy-saving circuit • Automatic water level control • Fixed Jet AWT with pop-up function • Heart NC software • Wire end remover • Dielectric cooling unit • Voltage stabilizer • LAN interface • USB port Further specifications for this machine: Travel (X/Y/Z axis, mm): 600 x 400 x 310 Cedpfx Ajyyy Diefyogr Travel (U/V axis, mm): 90 x 90 Max. workpiece weight (kg): 850 Table height from floor (mm): 1,000 Machine dimensions (W x D x H, mm): 2,595 x 3,445 x 2,245 Machine weight (kg): 3,684 Air pressure: 0.65 MPa, 30 NL/min Total power consumption: 11.5 kVA, 3 phase, 50/60 Hz Taper angle: ±15° (workpiece thickness: 120 mm) Wire diameter (mm): ø 0.1 ~ ø 0.3 mm Wire tension (N): 3 ~ 23 N Category ID: 1896 Type ID: 2593 Machine type: Wire EDM machine If you have any questions or require further information, feel free to send us a message or call us.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, AGIECUT Excellence 3 Year of manufacture: 2001 Travel paths: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Cjdpfxsyx D I Ao Afyjgr Submerged machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER handbox for convenient setup Including AGIESETUP 3D AGIEVISION control unit AGIE IPG generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Optional: Transport, commissioning, chiller

Condition: good (used), Year of construction: 1991, travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 300 mm, Wagner EDM DM 422 die-sinking electrical discharge machine, year of manufacture: 1991, operating hours: 21,391 h, working range X/Y/Z: 500/300/300 mm Cedeyx Ap Ejpfx Afyegr In good condition. Can be connected if necessary.

Condition: used, FANUC Robocut C 600 iA is a wire cutting EDM designed for precision, high accuracy and reliability. Working table 600×400 mm; max workpiece 1050×820×300 mm; table load 1000 kg; travels X600 Y400 Z310 U200 V200; wire from 0.1 mm. Power supply 50 Hz 3x 400 V; total power 11 kVA; machine weight ~1500 kg; overall 1800×1600×2000 mm. Accessories: lamp, automatic wire threading, Daikin cooling unit, automatic sliding door, glass rulers X,Y, rotating spindle Hirschmann F. Enables tight tolerances; typical applications: automotive, watchmaking, machine tools, aerospace, medical. Cgedpoyxprtsfx Afyer

Condition: used, Mitsubishi Wire EDM Machine, Spark Erosion Machine, Mitsubishi DWC 150 SZ, Used Machine Manufacturer: Mitsubishi Type: DWC 150 SZ Year of Manufacture: 1994 Overall Dimensions (Main Unit): Width: 1860 mm Depth: 2050 mm Height: 2400 mm Electrical Data: 400V; 21.5A Weight: 3500 kg Water Tank Size: 750 x 780 mm Electrical Cabinet Dimensions: Width: 1150 mm Depth: 2700 mm Height: 1050 mm Wire Feeder Unit Dimensions: Width: 320 mm Depth: 580 mm Height: 1380 mm Transformer Dimensions: Width: 510 mm Depth: 590 mm Height: 640 mm Water Treatment System Dimensions: Cgedpfx Asyxfqrjfysr Width: 1320 mm Depth: 1460 mm Height: 1360 mm Condition: Untested, sold in "as-is" condition. The machine is available for sale with the accessories and in the aesthetic condition shown in the photos.

Condition: good (used), Year of construction: 2008, travel distance X-axis: 570 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 350 mm, workpiece height (max.): 340 mm, workpiece width (max.): 520 mm, workpiece length (max.): 770 mm, cooler type CST150A-001A Weight 75 kg Csdpfjyw Uh Rsx Afyogr

Condition: excellent (used), Year of construction: 2008, operating hours: 32,820 h, functionality: fully functional, machine/vehicle number: 935452, workpiece weight (max.): 1,500 kg, travel distance X-axis: 550 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 700 mm, workpiece length (max.): 1,200 mm, overall weight: 4,450 kg, Equipment: documentation/manual, Agie Charmilles FI 440 SLP year of manufacture 2008 Cgedpfx Aoywcivjfysr operating hours 32,820 x, y, z: 550 x 350 x 400 mm u, v: 550 x 350 mm linear glass scales on all axes 0.5 μm max. workpiece dimensions 1200 x 700 x 400 mm max. taper angle 30 degrees chiller option for large wire spool option for wire chopper automatic wire threading/cutting and repair documentation and software machine powered up for inspection

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, X-axis 500 mm Y-axis 350 mm Z-axis 300 mm U/V axis 75 mm Max. workpiece dimensions 1,050 x 800 x 290 mm Max. table load 1,500 kg Cgodpfjyvr Tzjx Afyjr Machine weight approx. 4,000 kg The machine is in very good condition!

Condition: used, Year of construction: 2006, functionality: fully functional, workpiece weight (max.): 1,500 kg, travel distance X-axis: 530 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, table load: 1,500 kg, Equipment: cooling unit, documentation/manual, Mitsubishi FA20-VS Wire EDM (2006) We offer for sale a high-quality Mitsubishi FA20-VS wire EDM machine, year of manufacture 2006. The machine is in very good technical condition and can be fully tested under power. Basic Technical Data Manufacturer: Mitsubishi Electric Model: FA20-VS Year of manufacture: 2006 Control system: Mitsubishi CNC Cjdoyvhtwspfx Afysgr Axis travels: X: 500 mm Y: 350 mm Z: 300 mm Table size: approx. 780 × 630 mm Max. workpiece weight: approx. 1500 kg Wire diameter: 0.2 – 0.3 mm Machine Advantages • Stable and precise Mitsubishi construction • Suitable for toolshops and series production • Reliable technology with low operating costs Condition and Delivery The machine can be personally inspected under power. Delivery may include: • Installation at customer site • Commissioning • Basic operator training Installation can be provided across the entire EU.

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, total length: 1,050 mm, total width: 650 mm, workpiece height (max.): 250 mm, AGIECUT Excellence 3 eCut Year of manufacture: 2005 Travel paths: X = 500 mm, Y = 350 mm, Z = 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface quality: Ra: 0.10 µm Available wire diameters: 0.10 – 0.33 mm Submerged tank machine with automatic wire threading With automatically lowering tank (accessible from 2 sides) Including AGIEJOGGER hand box for convenient machine setup Including AGIESETUP 3D AGIEVISION control system AGIE IPG generator with eCut technologies Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be cleaned, overhauled, and thoroughly tested by us upon receipt of order. Includes user training at Techma on your overhauled machine Cgjdpfeyu Iq Ejx Afyer Optional services available on request: - Transport - Commissioning - Chiller unit - Clamping devices

Condition: excellent (used), Year of construction: 2016, operating hours: 8,000 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,345 mm, total length: 2,945 mm, total width: 2,757 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, type of input current: three-phase, table width: 490 mm, table length: 840 mm, table height: 995 mm, empty load weight: 4,600 kg, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 350 mm, table load: 1,000 kg, input voltage: 400 V, input frequency: 50 Hz, Equipment: cooling unit, documentation/manual, Commissioning date: May 2017. Cutting time: 8,000 hours. At our company, the machine operates in a climate-controlled, virtually dust-free facility with an epoxy-coated floor. Price of the machine – loaded onto a vehicle in Hungary. Shipping and all other costs are the responsibility of the buyer. Csdpsyuutgefx Afyegr

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, The GF AgieCharmilles CUT E600 from year 2017 is a powerful and precise used wire EDM machine, specifically designed for demanding applications in the metalworking industry. Thanks to state-of-the-art technology and intelligent controls, the CUT E600 delivers top cutting quality, low maintenance effort, and excellent return on investment. Main Features & Benefits: ✅ Large Working Area: - Workpiece size: max. 1030 x 800 x 350 mm - Max. workpiece weight: 1,000 kg - Travel distances: X/Y/Z: 600 x 400 x 350 mm - U/V axes: ± 50 mm - Taper cutting up to ± 30° / 77 mm ✅ High-Precision Machining: - Position accuracy via glass linear scales - Automatic wire tensioning for consistently precise cutting results - Achievable surface finish: Ra 0.18 µm (steel) ✅ Efficient Wire System: - Standard wire diameters: 0.20 and 0.25 mm - Additional possible wire diameters: 0.10 / 0.15 / 0.30 mm - Automatic wire feeding and re-threading - 25 kg wire spool for extended operation times ✅ Intelligent Control & User Friendliness: - Modern AC CUT HMI control with intuitive user interface - 19-inch touchscreen display for easy programming - DXF import & 3D graphic verification for precise simulations ✅ Reliability & Low Operating Costs: - Energy-efficient generator with low power consumption (9 kVA) - Low maintenance costs due to robust construction and durable wear parts - Integrated collision protection for maximum safety Ideal for: Cgodpfsyud I Hox Afysr ✔ Tool and mold making ✔ High-precision components ✔ Series production & prototyping Experience maximum productivity with the GF AgieCharmilles CUT E600 – the perfect choice for precise and cost-effective wire EDM! 📌 Our used machine from year 2017 is cleaned, overhauled, and thoroughly tested prior to sale to guarantee top quality and reliability. 📩 Contact us for a tailored quotation or a demonstration! We are also pleased to offer commissioning and operator training on the machine upon request.

Condition: like new (used), Year of construction: 2024, operating hours: 2,200 h, functionality: fully functional, workpiece weight (max.): 850 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,245 mm, total length: 3,445 mm, total width: 2,595 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, overall weight: 3,684 kg, Equipment: documentation/manual, We are offering this Sodick VN 600Q wire EDM machine, year of manufacture 2024. Manufacturer: Sodick Model: VN 600Q Cjdpfsytr Nvex Afysgr Year: 2024 Condition: like new The machine currently has 1,137 hours of cutting time and approx. 2,200 operating hours. • 10-year warranty on positioning accuracy • Linear motors (X, Y, U, V axes) • Absolute linear glass scales (X, Y, U, V axes) • Ceramic components • LN3W generator • Remote control • Enhanced operator-friendliness • Energy-saving circuit • Automatic water level control • Fixed Jet AWT with pop-up function • Heart NC software • Wire end remover • Dielectric cooling unit • Voltage stabilizer • LAN interface • USB port Further specifications for this machine: Travel (X/Y/Z axis, mm): 600 x 400 x 310 Travel (U/V axis, mm): 90 x 90 Max. workpiece weight (kg): 850 Table height from floor (mm): 1,000 Machine dimensions (W x D x H, mm): 2,595 x 3,445 x 2,245 Machine weight (kg): 3,684 Air pressure: 0.65 MPa, 30 NL/min Total power consumption: 11.5 kVA, 3 phase, 50/60 Hz Taper angle: ±15° (workpiece thickness: 120 mm) Wire diameter (mm): ø 0.1 ~ ø 0.3 mm Wire tension (N): 3 ~ 23 N Category ID: 1896 Type ID: 2593 Machine type: Wire EDM machine If you have any questions or require further information, feel free to send us a message or call us.

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: J20M0956, workpiece weight (max.): 1,500 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 300 mm, controller model: MITSUBISHI ADVANCE, No reserve price – guaranteed sale to the highest bidder! Placing a bid constitutes a binding commitment to collect the machine on time between 04.05.26 and 07.05.26. TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 350 mm Travel Z-axis: 300 mm Travel U and V axes: ±75 mm Taper angle at workpiece width: 15° Maximum workpiece dimensions: 1,050 x 800 x 295 mm Maximum workpiece weight: 1,500 kg Table dimensions: 780 x 630 mm Permissible wire diameter: 0.07 – 0.3 mm Feed rate X- and Y-axes: 1,300 mm/min MACHINE DETAILS Control unit: MITSUBISHI ADVANCE Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,000 x 2,500 mm Weight: 4,000 kg Cgodpfx Asyr Niqsfysr EQUIPMENT Coolant system Transformer Documentation Note: The machine can be transported with a standard truck. External reference: 58

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 520 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 310 mm, overall weight: 2,600 kg, controller manufacturer: FANUC, controller model: Series 18i-W, number of axes: 5, This 5-axis FANUC ROBOCUT α-1iA was manufactured in 2000. It features a stroke of 520 mm on the X-axis, 370 mm on the Y-axis, and 310 mm on the Z-axis, providing versatile machining capabilities. The machine has a permissible mass of workpiece up to 1000 kg, making it suitable for various applications. If you are looking to get high-quality wire EDM capabilities, consider the FANUC ROBOCUT α-1iA machine we have for sale. Contact us for further details. Cgsdpfx Afeyq Iw Deyor • Control type/code: A04B-0312-B001#E5 • Strokes: U 120 mm, V 120 mm • Rapid traverse: X/Y/Z 900 mm/min; U/V 450 mm/min • Permissible workpiece mass: 1000 kg • Power supply options: • 200 V (+10% / -15%), 3-phase, 50/60 Hz (±1 Hz) • 220 V (+10% / -15%), 3-phase, 60 Hz (±1 Hz) • Power consumption: 13 kVA • Control panel: Integrated CRT/LCD with alphanumeric membrane keypad and lower toggle/button interface • Wire feed system: Multi-spool assembly in machining chamber

Condition: excellent (used), Year of construction: 2013, workpiece weight (max.): 800 kg, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, total height: 2,290 mm, total length: 2,720 mm, total width: 2,520 mm, type of input current: three-phase, overall weight: 3,850 kg, table length: 1,000 mm, input voltage: 220 V, tank capacity: 850 l, input frequency: 50 Hz, Equipment: documentation/manual, We offer the machine EXCETEK V650G in very good condition. Year of construction 2013. The machine has been in our ownership since the beginning. The machine has been serviced from authorized slovenian service company and we have all the service lists. The machine is placed in Zagreb, Croatia. Cgodpfxsyn Sils Afyer PRICE = 23.800,00 EUR Loading is included in price! Model number: V650G Serial number: MWI3650010 Assembly number: A0A2400601 Manufacturing date: 2013/06 Weight: 3850 kg If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 64,348 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, controller manufacturer: MITSUBISHI, number of axes: 3, This 3-axis Mitsubishi MV 2400S wire EDM machine was manufactured in 2015. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm. The machine can accommodate workpieces up to 1,050 mm in length and 820 mm in width, with a maximum weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV 2400S machine we have for sale. Contact us for further details. • Maximum workpiece length: 1,050 mm • Maximum workpiece width: 820 mm • Maximum workpiece height: 305 mm • Maximum workpiece weight: 1,500 kg • Tank length: 1,050 mm • Tank width: 820 mm Cgjdpfx Afsylm Scjyer • Tank height: 305 mm • Automatic wire threading: Yes Additional equipment • Wire feeder with enlarged 25 kg spool

Condition: refurbished (used), Year of construction: 2017, operating hours: 3,751 h, functionality: fully functional, workpiece weight (max.): 750 kg, travel distance X-axis: 350 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 220 mm, total height: 201 mm, total length: 220 mm, total width: 202 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 220 mm, workpiece width (max.): 550 mm, workpiece length (max.): 1,000 mm, type of input current: three-phase, table width: 450 mm, table length: 680 mm, empty load weight: 2,450 kg, feed length Y-axis: 3,300 mm, GF CUT200SP, year 2017. Machine available at our Semsales premises in April. The machine will be fully cleaned and serviced. 0.1 mm option. Wire chopper. Cedpfxjyk Upas Afyegr

Condition: ready for operation (used), Year of construction: 2024, operating hours: 1,800 h, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, total height: 2,080 mm, total width: 2,620 mm, wire diameter (max.): 0.3 mm, overall weight: 3,300 kg, number of axes: 5, wire diameter (min.): 0.1 mm, This 5s Sodick VN 600 Q wire edm machine was manufactured in 2024. It features a maximum workpiece weight of 1,874 lbs and advanced capabilities such as high-speed automatic wire threading and improved surface finish circuit for smoother machining. With a robust design and user-friendly software, consider the opportunity to buy this Sodick VN 600 Q wire edm machine. Contact us for further details. Codpfeyi Dwkex Afyogr • Hours: 1,800 • U/V-axis travel: 3.54" x 3.54" (90 x 90 mm) • Wire diameter range: 0.004"–0.012" (0.10–0.30 mm) • Work tank dimensions (W x D): 40.94" x 30.71" (1040 x 780 mm) • Maximum workpiece weight: 1,874 lbs (850 kg) • Distance from floor to table: 36.61" (930 mm) • Fixed Jet High Speed Automatic Wire Threading (AWT) • Improved Surface Finish Circuit — smoother machining finish • High Speed Electrolysis-Free Power Supply • Advanced Tension Servo Control — stable wire tension control • Ceramic machine components — improved thermal stability & wear resistance • Wire Tip Disposal Unit — automatic waste handling • Z-axis automatic dielectric fluid level control • Motion controller — precision axis control system • On-board user-friendly Heart NC software • Remote hand control + mouse • USB & LAN connection ports — data transfer and networking • Energy saving circuit — reduced power consumption • Built-in voltage stabilizer — stable power input Dimensions Machine Depth 2605 mm

Condition: good (used), Year of construction: 2016, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: - 396.900.171.0076, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total length: 1,030 mm, The machine is in excellent condition and can be inspected under power. Cgsdpfsyit Ulex Afyjr

Condition: used, Year of construction: 2007, Wire EDM machine MITSUBISHI FA20S, No. 07F2A056, year of manufacture 2007, working area 500 x 350 x 300 mm Cgsdjyhql Eopfx Afyjr

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iA Codpfjyhb D Eex Afyjgr

Condition: reconditioned (used), Year of construction: 2006, operating hours: 17,800 h, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 430 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 420 mm, type of input current: three-phase, overall weight: 2,650 kg, table load: 400 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 17 A, positioning accuracy: 0.001 mm, We offer this reconditioned AGIE AGIECUT PROGRESS 3 wire EDM machine, year of manufacture 2006. Serial number: 214 Machine list: 033.300 Year of manufacture: 2006 Electrical diagram: 630.972 Weight: 2650 kg Voltage: 3 x 400 V Frequency: 50 Hz Power: 12.1 kVA Rated current: 17.5 A Short-circuit current: 10 kA Codpfx Afsyghmwjyjgr If you have any questions or need further information, feel free to send us a message or give us a call.

Condition: refurbished (used), Year of construction: 2021, functionality: fully functional, workpiece weight (max.): 800 kg, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 256 mm, GF AGIECHARMILLES CUT 3000X Year of manufacture: 2021 Travel distances: X= 500 mm, Y= 350 mm, Z= 256 mm U/V-axis travel: +/- 70 mm Maximum taper: 30° at 100 mm height Maximum workpiece dimensions: 1050 x 650 x 250 mm Maximum workpiece weight: 400/800 kg Achievable surface finish: Ra: 0.05 µm Available wire diameters: 0.05 – 0.33 mm (incl. KIT 50) Submerged-type machine with automatic wire threading With automatically lowering work tank (accessible from 2 sides) Incl. AGIEJOGGER handbox for convenient setup Incl. AGIESETUP 3D Incl. automatic wire changer AWC (use of 2 wire spools) Incl. Conic-Plus option Incl. Fast-Threading option Incl. Smart-Threading option VISION 5 control system AGIE IPG-V generator Dimensions (L x W x H): 2800 x 2400 x 2220 mm Net weight: 4500 kg The machine will be fully cleaned, overhauled, and thoroughly tested after receipt of order. We conduct laser measurement of the axes at our premises. On request, we are also happy to carry out a custom test on the CUT 3000 for you. Includes user training at Techma on your overhauled machine We are happy to optionally offer: Csdpfjych Rzjx Afyegr - Transport - Commissioning - Chiller unit - Clamping devices - Consumables

Condition: refurbished (used), Year of construction: 2010, operating hours: 9,563 h, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 350 mm, total height: 2,320 mm, total length: 3,100 mm, total width: 2,800 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 350 mm, workpiece width (max.): 800 mm, workpiece length (max.): 1,030 mm, type of input current: three-phase, table width: 630 mm, overall weight: 4,440 kg, table length: 950 mm, GF CUT30P - 2010. Available for inspection at our premises in Semsales (Switzerland). Viewing by appointment. More information upon request. Cgjdpfeyazkcox Afyor