Used secondary shredders for sale (7)

Condition: used, Year of construction: 2019, operating hours: 19,020 h, functionality: fully functional, total length: 5,813 mm, total height: 3,111 mm, overall weight: 23,200 kg, total width: 2,925 mm, rotor length: 2,200 mm, number of blades: 84, year of last overhaul: 2025, # Lindner Komet 2200 HP – Year of Construction 2019 – 400 kW – approx. 19,020 operating hours For sale is a powerful and regularly maintained Lindner Komet 2200 HP secondary shredder, year of construction 2019, from our existing industrial waste processing plant. The machine was used for the secondary shredding of processed material for the production of substitute fuels (SFS) and was permanently integrated into our stationary production line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Komet 2200-1 HP - Year of Construction: 2019 - Operating Hours: approx. 19,020 h - Drive Power: 2 × 200 kW (400 kW) - Speed: 355 RPM - Operating Voltage: 400 V / 50 Hz - Cutting Unit: 172R - Screening Unit: DM 30 - Hydraulic feed system - Frequency-controlled drive - Siemens HMI touch panel, 15 inches - Freestanding hydraulic unit - Mechanical safety couplings - Mechanical central lubrication ### Equipment and Features Powerful belt drive with ABB asynchronous motors and frequency inverters to adjust the shredding performance to the respective material. Hydraulic feed system for controlled material feed, reusable replaceable knives, and hydraulically pivoting screening unit and stripping comb for maintenance work. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its service life. A separate maintenance contract exists with the manufacturer, Lindner Recyclingtech, for the Komet 2200 HP. In addition to the scheduled maintenance, necessary repairs and wear parts were continuously replaced. Important maintenance measures: - 2025: Complete clutch replaced. - Regular rotor resurfacing: The rotor is completely resurfaced at regular intervals to repair worn areas and extend its service life. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate control room and are thus protected from dust and dirt from the production environment. ### Spare Parts Various available spare parts are included in the scope of delivery and will be handed over to the buyer upon purchase. Bsdpfxs Ahnl Ro Aktslp ### Sale Due to Plant Modernization The sale is taking place due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on-site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price upon request.

Condition: repair required (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: OP-2013-019*002, total length: 2,730 mm, total height: 3,192 mm, overall weight: 3,100 kg, total width: 1,752 mm, This is a two-rotor, slow-speed shredder from the manufacturer Automatica s.r.o., equipped with a new electric motor and a Nord gearbox. Unfortunately, the machine has a rotor shaft defect, but it is repairable. It includes new stator and rotor blades. New electrical wiring, including a switchboard. Bsdpszgf R Sjfx Aktelp Control via PLC, see photo. The shredder is designed for shredding wood, plastic, cardboard, etc.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: E-1579, total length: 3,000 mm, total height: 2,450 mm, overall weight: 5,400 kg, total width: 1,800 mm, rotational speed (max.): 900 rpm, THM TQZ1200 Shredder – Year 2017 THM TQZ1200 shredder for recycling and material processing applications. Blsdpjz Erxwjfx Aktjp The machine performs the shredding process using rotating accelerating elements and is designed for integration into processing and recycling plants. Key technical features: Manufacturer: THM Recycling Solutions Model: TQZ1200 Year of manufacture: 2017 Machine number: E-1579 Main motor power: 90 kW Electrical supply: 400 V / 50 Hz Impact head speed: 900 rpm Internal diameter of the working chamber: 1,200 mm Height of the working chamber: 1,210 mm Accelerating elements: chains Approximate dimensions: 3,000 × 1,800 × 2,450 mm Approximate weight: 5,400 kg Working hydraulic pressure: approx. 130 bar Hydraulic tank capacity: approx. 100 l Robust industrial machine designed for integration into processing and recycling lines. Technical documentation available. For more information, photographs, or technical documentation, please contact us.

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Bledpfx Asyu Undoktop Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Height [mm]: 2,700 Documentation: German 2014 A complete overhaul was carried out. Blodpfx Aksibzbhetjp A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Additional photos and video available upon request.

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate. Bedpswxmb Esfx Aktolp

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 440, total length: 650 mm, total height: 1,500 mm, overall weight: 100 kg, total width: 1,100 mm, filling opening length: 650 mm, filling opening width: 450 mm, motor model: 11kW, Equipment: CE marking, RP2 Foam Shredder – Industrial Foam Grinding and Recycling Machine Professional Foam Waste Processing Solution The RP2 Foam Shredder is a heavy-duty industrial machine designed for shredding and grinding polyurethane foam (PU foam), upholstery foam, foam offcuts, production waste, and bonded foam materials. It is an ideal solution for furniture manufacturers, mattress producers, upholstery workshops, foam processing companies, and recycling facilities looking to efficiently reuse foam waste and reduce disposal costs. The machine converts foam scraps into high-quality foam flakes that can be reused for: Cushion and pillow filling Upholstery production Acoustic insulation products Rebonded foam manufacturing Packaging materials Other recycling applications Key Benefits ✔ High processing capacity – up to 10 m³/hour ✔ Suitable for soft and rigid polyurethane foam ✔ Processes foam with fabric, textile, or synthetic leather coverings ✔ Robust industrial steel construction ✔ Reliable and low-maintenance operation ✔ Easy loading and material handling ✔ Uniform output thanks to interchangeable screens ✔ Custom configurations available Technical Specifications Motor power: 11 kW Power supply: 400 V / 3 Phase Rotor diameter: 500 mm Large feeding hopper Dual material discharge outlets Single-sided cutting rotor knife Interchangeable screening system Capacity: approximately 10 m³ of foam per hour Bsdpfx Aezdra Ujktelp Applications: Furniture manufacturing Mattress production Upholstery workshops Foam converting industry Recycling facilities Acoustic insulation manufacturers Packaging industry Custom Manufacturing We are a manufacturer of industrial foam processing equipment and can adapt the machine to individual customer requirements. Different motor sizes, screen configurations, capacities, and customized solutions are available upon request. Why Choose RP2? Increase the value of foam waste Reduce disposal costs Improve recycling efficiency Produce reusable foam flakes for further manufacturing Reliable industrial-grade construction Direct support from the manufacturer Interested in improving your foam recycling process? Contact us for detailed specifications, pricing, delivery options, and customized solutions tailored to your production needs. Manufacturer Direct | Industrial Foam Recycling Equipment | Made in EU