Mecánica Comercial Meco, S.L.

Condition: repair required (used), functionality: limited functionality, Year of construction: 1981, broaching length: 400 mm, For sale is a Leistritz Polymat keyseating machine. This is an upgraded Stuhlmann machine. The machine is functional but occasionally has an intermittent electrical contact. Fodexmg Acjpfx Aabjpn Available accessories: guide bar for cutters WC2 / WC3 / WC4, various feed bars, and 2 tool holders WC7 – see images.

Condition: used, Year of construction: 2001, Technical details: groove width: 2-25 mm Fjdpoxl Ufpjfx Aabepn pulling force - max.: 0,6 t boring diameter: 10-350 mm load capacity: 10000 kg drawing speed: stufenlos einstellbar 0,01-20 mm/min feed: frei programmierbar 0,01-5 mm table-size: 550 x 675 mm work piece outside diameter: max. 500 mm work height max.: 1050 (Tischhöhe) mm total power requirement: 3 kW weight of the machine ca.: 1000 kg

Condition: used, functionality: fully functional, Lifting height: 350 mm Fsdpfx Ajxk T Rhjabjpn Rotary table diameter: 800 mm Table cross travel: 600 mm Table longitudinal travel: 650 mm Adjustable travel: 400 mm

Condition: new, Hydraulic broaching machine Fpjdpfx Asxhci Ijabon

Condition: used, Bystronic Byspeed 3015 – Laser Cutting Machine with Bytrans Automation (2007) Manufacturer: Bystronic Laser AG, Switzerland Model: Byspeed 3015 Year of Manufacture: 2007 Machine No.: 652 Job No.: 30006335 Equipment No.: 10022619 Technical Specifications: • Working area: 3000 x 1500 mm • Laser power: [please confirm exact laser source in kW, typically 3–4.4 kW for this model] • Voltage: 3x400 V, 50 Hz • Connected load: 52 kW • Max. current: 125 A • Proportion current of biggest consumer: 39 A • Total weight: 800 kg (control cabinet unit, machine heavier in total) Included Equipment: Fedpoxgnzgjfx Aabjpn • Bytrans automation system (automatic loading & unloading) • Dust extraction system – included and in good working condition • Cooling unit (chiller) – included and in good working condition • CE certified • Made in Switzerland Condition: • Used, generally in good condition • Note: The turbo requires repair. A quotation for approx. €7,000 has been received. Apart from this, the machine is well maintained. • Still installed – can be inspected in operation upon request • Available immediately

Condition: used, functionality: fully functional, Type: Hydraulic Guillotine Manufacturer: HJO, Sweden Year: 1984 Max. plate thickness 4 mm Max. plate length 2500 mm Max. operating pressure 21.0 MPa V 3 x 380 Hz 50 Fpodpfx Aaoxgcz Iobsn Weight 3700 kg Quick action blade clearance adjustment, floor pedal control.

Condition: ready for operation (used), Year of construction: 1984, overall weight: 950 kg, 170 mm travel, cross table, automatic transverse movement Fodpfoxfr Rvox Aabspn

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,000 kg, travel 300 mm, rotary table diameter 500 mm Fpodsxfq Iyopfx Aaben

Condition: new, Year of construction: 2025, Brand new NC-controlled precision vertical slotting machine for efficient production of keyways. Menu-guided program control for slot depth, slot width, cutting depth, tool width, and number of finishing strokes. Optionally available with a rotary indexing table. Rotary table diameter Ø 320 mm – up to three CNC axes possible. Stroke range of the slotting ram: 0 to 200 mm. Table size: 280 x 500 mm. Clamping table bore: Ø 80 mm. Throat depth: 350 mm. Maximum workpiece height: 400 mm. Continuously variable ram speeds: 30 to 120 mm/min. Fsdpfx Aaexdi D Debspn Dimensions approx. 1.2 x 1.2 m x height 2.3 m. Drive power: 2.2 kW. Weight approx. 2,200 kg.

Condition: excellent (used), Year of construction: 1997, Indexing table 400 mm hand Set tooling included Table bore 10 - 130 mm Key width from 2 - 32 mm Feed rate 0,5 - 5 M/Min; Table Ø: 690 x 460mm Table load: 2000 Fsdpfx Aasxclfzjbepn Ram adjustment:0 - 425mm Length: 1300mm Width: 1100mm Height: 1400mm Weight: 1800kg

Condition: ready for operation (used), Year of construction: 2001, A horizontal external broaching machine Hoffmann is available. Traction force: 25t, broaching stroke: 4000mm, stroke length: 400mm, broaching speed: 40m/min, return speed: 45m/min, max. operating pressure: 70bar, hydraulic oil volume: 630l, cycle time at 25m/min: approx. 50s, output in continuous operation: approx. 72 parts/h. Machine dimensions X/Y/Z: approx. 10000mm/7700mm/5000mm, weight: approx. 50000kg. Includes workpiece loader and automation, 3-piece tool broaching bar package. Various spare parts (motors, gearboxes, etc.) available on request. Documentation available. An on-site inspection is possible. Fpedpfx Aexa Ei Ijabjn

Condition: excellent (used), Artrhur Klink RSH1 - 1250 Broach Grinder 09.2009 , new 1979, Table 200 x 1800, Electro mag 200 x 600, with related tooling/accessories, no cabinet. Fpsdpow U Upnsfx Aabon

Condition: used, Year of construction: 1989, stroke 600 mm hydraulic ja keins dabei weight 3,7 t Fpodpfew Sykfjx Aabon

Condition: good (used), pulling force - max. 6 t max. ram stroke 800 mm Fodew Saihopfx Aabepn max. workpiece diameter 40 mm weight of the machine ca. 1,2 t dimensions of the machine ca. 2,0 x 0,8 x 1,4 m

Condition: good (used), Year of construction: 1980, Info: Machine was embedded in a pit! - Tractive force: max. 25,000 kg - Clearing stroke: max. 630 mm - Clearing speed: 1 - 10 m/min Fpodpfx Ajw R Sz Teaben - Return speed: 7 - 25 m/min - Total connection requirement: 45 kW - Machine weight: 5,500 kg

Condition: good (used), Year of construction: 2004, - Tractive force: max. 160 kN - Clearing stroke: max. 1000 mm - Truck feed stroke: max. 630 mm - Table top width: 630 mm - Broaching speed: 10 m/min - Return speed: 23 m/min - Installed power: max. 88 kW Fpjdpfx Aaew R Szmobsn - Machine weight: 12,410 kg

Condition: excellent (used), For sale: Professional dot peen marking machine PRO PEN P5000 (GravoTech Marking SAS), distributed by HAHN+KOLB Gruppe. This is a fully industrial-grade device designed for permanent marking of metal and plastic parts—serial numbers, logos, codes, and production markings. Specifications: • Model: Propen P5000 Pn/d • Year of manufacture: 2010 • Power supply: 100–240 V, 50/60 Hz • Power: 150 W • Operating pressure: 5.5 bar (pneumatic supply) • Manufacturer: GravoTech Marking SAS, France • Operator panel with touchscreen + HP keyboard • Robust worktable with guides. The machine is complete, fully functional, and ready for operation. Ideal for workshops, production plants, tool rooms, and wherever quick and precise permanent marking is required. Very good condition—well-maintained unit with minimal signs of use. Fpedpjw R Spqsfx Aabon

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, Vertical Notch Broaching Machine Manufacturer: Blacks Model: 1 W-CNB 34 Fsdew Rpvzjpfx Aabepn Machine No.: S05035C Year of manufacture: 4/2005 Weight: 95kg General / Technical Data: Very well-maintained broaching machine for external notching of samples for tensile testing Broaching speeds: variable from 0.43 to 2.27 m/min Dimensions (H x W x D): 1370mm x 600mm x 450mm Power supply: 400V / 50 Hz Equipment: - Variable speed control via adjustable mechanical gearbox (manufacturer: Lenze); no electronic control! - Clamping fixture for tensile specimens - 3 used broaching tools - Machine documentation in German and English - Machine documentation including “CE” declaration of conformity in English General Information The dual spindle drive ensures smooth operation and a centrally aligned pull point, as well as a consistently uniform broaching speed. The broaching machine is a specially designed unit for machining V- and U-notches according to Charpy and Izod standards in pre-machined, square 10-mm standard test specimens. The CNB-34 produces a consistent notch of higher quality than what is achievable by milling. The machine is easy to operate and features a robust construction with removable maintenance panels for convenient routine servicing. Its design provides a comfortable working height. During the cutting process, a specially designed broaching tool is drawn over the specimen. The broaching tool is pulled downward into the machine via a gearbox and a dual spindle drive. The specimen is secured in the machine using the special clamping fixture. The broaching tool is lubricated with cutting oil. By pressing the broaching cycle button, the notch tool is forcibly guided down through the specimen, producing an accurate notch profile. After cutting the notch, the specimen must be removed before returning the tool. The tool is then returned without a workpiece and cleaned of any chips. Only after this cleaning step is the machine ready for further operation.

Condition: good (used), max. ram stroke 230 mm throat 230 mm table diameter 0 mm are offered : 2 pieces of shaping spindle for Lorenz gear shaping machines type LS 630 to LS 1250 1x overhauled new 1x has to be overhauled. Fpjdjw Ny S Rjpfx Aabjn Year of manufacture: unknown

Condition: excellent (used), Utilaj de rectificat in coordonate Fsdjw Nmiijpfx Aabopn

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new Fedpfjw Ighisx Aabspn - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Fpedpfxow H Dgno Aabsn Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, input voltage: 400 V, broaching length: 1,000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of Manufacture: 1995 Weight: 400 kg Fjdjw Huh Nopfx Aabspn Overhaul Due: 04/2025 by Wiemers AG General / Technical Data: Unused, fully overhauled mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / workspace: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard keyway broaches "Rausch system" Workpiece diameter: unlimited (removable coolant swiveling system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Safety door with interlock system (emergency stop circuit) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective covers for stroke adjustment and electrical switch gear - Electrical sensing of clamping jaws (tool removal check prevents unintentional return of the pull bridge, adding extra safety for operator and tool) - Integrated coolant system - Coolant swiveling system (without electrical switching function) - Three-sided splash guard enclosure with wide front opening for working area - Extra reinforced chip basket and chip screen with magnet feature - Stainless steel operator panel with permanent labeling - 4 central lubrication points for leadscrew drive with manual grease gun - New machine documentation - CE marking by manufacturer (1995) Remarks: The machine is overhauled and the machine body has been fully refurbished. The following wear parts were replaced or renewed: - New trapezoidal screws and nuts made of cast wear-resistant bronze - All bearings and seals replaced - The entire coolant system incl. coolant/lubricant swiveling system is new - New two-speed SEW gear motor - New electrical system (Siemens) - New safety door replacing the old light barrier - New clamping jaws - All sheet metal parts such as covers, chip chute, basket, screen, and spindle guard are new - Stainless steel operator panel with permanent labeling - Machine has been newly painted with 2-component structural lacquer This machine carries the manufacturer’s CE marking. General Information: The twin-spindle drive ensures quiet, centrally aligned pull and constant broaching speed. The machine is primarily designed to cut keyways up to 18 mm wide (from 16 mm tool width only with stepped tool shanks). The design allows for quick and easy setup for broaching with flat broaches for keyway slots. Thanks to the universally designed pull bridge and machine table, broaching with both profile and flat broaches is possible without requiring additional pull heads.

Condition: new, Year of construction: 2019, machine/vehicle number: 3813, overall weight: 600 kg, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, workpiece diameter (max.): 300 mm, Designation: Vertical Broaching Machine Manufacturer: Rausch GmbH & Co. KG Model: RS 30/1000 Machine No.: 3813 Year of manufacture: 2019 Never commissioned Complete documentation Without broaching tools (broaches) Working Area Max. stroke: 1000 mm Max. pulling force: 30 kN Min./max. cutting speed: 1.0 – 7.5 m/min Min./max. return speed: 1.0 – 7.5 m/min Internal Broaching: Tool feed: manual/automatic Fodpew Evkiefx Aabspn Max. workpiece diameter: 300 mm External Broaching: Fixed/movable/rotatable workpiece clamping plate Clamping plate area: 255 mm x 400 mm T-slots: 2 units, 14 mm wide, parallel/perpendicular to the mounting surface of the tool slide Accessories/Special Equipment: Coolant system Broaching tool safety device Machine cover for workspace protection Footprint: 0.72 m x 1.3 m x 2.67 m (LxWxH) Weight: 600 kg Voltage: 400 V Current type: Three-phase Y/Δ 50 Hz Connected load: 12 kVA Max. fuse: 25 A Motor: Main drive: 7 kW / 2000 rpm Coolant pump: 0.12 kW / 2700 rpm Broaching Tool Holder: Clamping jaws for flat and profile tools up to 18 mm shank width Coolant supply: ½" Please submit inquiries only via email. All information is provided to the best of our knowledge. Subject to errors. This offer is directed exclusively at businesses as defined by § 14 BGB. Sale is made without any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the seller's obligations or for any injury to life, limb, or health. For further information, please visit the website of Witzenmann GmbH under the headings "Imprint", "General Terms and Conditions", and "Data Protection".

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 480 kg, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 100 mm/s, workpiece diameter (max.): 800 mm, total height: 1,680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical Data: New vertical broaching machine by Wiemers SR 30 (100% compatible with Rausch RS 3) Tensile force: 30 kN (3,000kg) Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / Working area: 430mm x 320mm / 340mm x 220mm Table aperture: Ø 90mm for standard broaching arbors "System Rausch" Workpiece diameter: unlimited (removable coolant swivel system) Broaching capacity / keyway width: up to 20mm in steel (from 16mm broaching tool width only with stepped tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height from floor without attachments) Motor: 2.5kW/3.0kW, 2-stage for 2 working speeds Power supply: 400 Volt / 50 Hz Fpjdpfew D E Twsx Aabjn Equipment: - Gear motor drive with 2 working speeds - Reinforced draw bridge made from tool steel for higher tensile forces - Safety door with door interlock, safety interrogation and safety monitoring - Easily removable chip chute with tool extraction protection and parking facility - Externally adjustable tool length setting system (reproducible across machines) - Protective covers for stroke adjustment and electrical switching units - Oil-tight tray on the control cabinet - Electrical sensing of clamping jaws (tool extraction monitoring prevents unintentional retraction of the draw bridge – extra safety for operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain tap - Coolant swivel system with automatic coolant switching via the swivel system - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel control panel with permanent labelling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical preparation for external control element (16-pin connector) - Provision for automatic clamping jaw opening during profile broaching with roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic clamping jaw opener for easier tool extraction during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600mm - External electrical operating unit for broaching and return stroke, as well as emergency stop functionality Note: The machine is 100% compatible with Rausch broaching machines of the same performance class in the RS 3, RS 4, and RS 6 series available on the market. All fixtures, tools or arbors can be used 100% interchangeably. General information: The double spindle drive ensures a smooth and centered pulling force as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20mm. (From 16mm keyway tool width only with stepped tool shanks) The design of the machine allows for fast and easy setup for broaching with flat broaching tools for keyways. Thanks to the universally constructed drawbridge and machine table, broaching with both profile and flat broaching tools is possible. Profile broaching can be performed without the use of additional pull heads, by using simple centering bushings. Suitable broaching tools and arbors for the machine are available on request.