Parcon B.V.

Condition: new, Working width: 185 cm Kwedsyaul Tjpfx Adwot

Condition: used, Year of construction: 2013, working width: 3,100 mm, Cutter bar: Disc | Used rear disc mower John Deere 331 Year of manufacture: 2013 Disc mower with steel tine conditioner Kwedpfx Adsyaiw Rswot Vertically (to the rear) foldable Working width: 3.10 m Quick-change blade system 1000 rpm | Internal ID: 11361339

Condition: new, Year of construction: 2023, Watering arm / irrigating boom    • Integrated tractor bumper    • Cat 2 three-point linkage    • Approx. 6 metre reach    • 2" galvanised piping    • Hose and spray head with Storz coupling Kwedpfxex S Sa He Adwet    • Double-acting hydraulic cylinders    • Heavy-duty slewing ring    • Mechanically rotatable in 5 positions    • Available from stock! Condition: New Year of manufacture: 2023

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar Kwsdpfxox R Uw Sj Adwot * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 2024, Front Boom Mower MFK 500 Base Unit for Single- or Two-Man Operation * Mounting Plate: Suitable for front attachment plate size 3 or 5 * Right- and left-hand working possible * Boom swivel range: 190 degrees * Hydraulic collision protection with damping of the boom system via hydraulic accumulator * Hydraulic lateral movement of the boom by 1,800 mm * Engagable/disengagable float position for implement attachments * Quick-change system for implements * Safety Stop: Electric cutting shaft on/off from the control panel, incl. brake valve (cutter shaft run-down approx. 4 sec.) * Hour meter * Park position for boom arm and implement in front of the carrier vehicle Proportional Control mlcontrol Permanent Hydraulics (CAN-Bus Technology) * Dual cylinder operation for simultaneous execution of multiple functions * Boom relief control Type AER: Infinitely adjustable contact pressure, can be engaged/disengaged * Operator information system with TFT color display, incl. system monitoring and diagnostic help * mltronic relief control: Computer-assisted contact pressure control for the mower head using travel/force sensors * Switchable to boom relief control Type AER (only with certain mower heads) mlbasic Multifunction Joystick * One-hand control panel with multifunction joystick Implement Drive & Hydraulics * Front PTO for implement drive * Hydraulic pump for implements: 62 l / 340 bar * Oil fill: Mineral oil HLP 46 (only with implement drive via front PTO) Kwjdpsx R Uwrofx Adwjt Boom System * Telescopic boom: Hydraulically adjustable, reach extendable by 1,000 mm (max. 7.00 m from vehicle center, for Unimog from U400-U500 / U318-U535) Additional Equipment * Valve (single electric-hydraulic switching): Switchable from control panel, for additional hydraulic double function * Hydraulic rotation device: Swivel range 230°, integrated on boom side, incl. quick-change plate, can be used with multiple implements * Hydraulic quick couplers: Kit for flat-sealing quick couplers on the mower * Paint: Orange RAL 2011, low-emission (2-component paint process) Mower Head MK 1200 plus * Working width: 1,200 mm * Cutting thickness: Max. 20 mm * Incl. debris guard Other Notes: * Trade-ins and purchase of vehicles and machines possible. * Sale price does not include transport. * No liability for print or typographical errors. * Subject to error, change, and prior sale. * Offer non-binding. * Photos may differ. Price applies to the condition as is. * All details provided without guarantee. Further Information New: No

Condition: new, color: yellow, Working width: 12.500 cm Kjdpfxox I Hgys Adwowt

Condition: used, Year of construction: 2017, Working width: 140 cm Kwedpfex I Dx Hsx Adwet Required tractor power: 20 hp

Condition: used, functionality: fully functional, power: 26 kW (35.35 HP), first registration: 09/2015, fuel type: diesel, color: red, axle configuration: 4x4, operation weight: 1,500 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Year of construction: 2015, operating hours: 2,398 h, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, Self-propelled work machine, mower: + Toro + Groundsmaster 360 + Year of manufacture: 2015 + 2,398 operating hours + 4-cylinder Kubota diesel engine, 1,498 cc, 35 HP + All-wheel drive + Selectable all-wheel steering + Hydrostatic drive, max speed 20 km/h + Front and mid-mount lift arms + Front hydraulics + PTO (power take-off) + Beacon lights + Full cab with opening windows + Air conditioning / heating + Hand throttle + Toro rotary mower deck with 3 blades, 180 cm cutting width Optional: + Müthing front mulcher Kwodpfex E R Enox Adwst + Type MU-FM + 160 cm working width + 240 kg + Year of manufacture: 2015 Municipal vehicle from first owner Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos excepted, subject to prior sale!

Condition: repair required (used), functionality: not functional, mileage: 12,193 km, power: 50 kW (67.98 HP), first registration: 09/2004, overall weight: 3,000 kg, fuel type: diesel, color: red, axle configuration: 4x4, operation weight: 2,065 kg, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, Year of construction: 2004, operating hours: 7,375 h, Equipment: ABS, air conditioning, all wheel drive, differential lock, hydraulics, trailer coupling, Tractor / Agricultural Tractor: + Reform-Werke + Metrac H7S (226.050.038) + First registration: 10.09.2004 + 12,193 km; 7,375 operating hours + Hydrostatic transmission (max speed 40 km/h) + 4-cylinder VM diesel engine, 68 hp, 2,970 cc + ENGINE DAMAGE: PUSHES OIL OUT THROUGH THE VENTILATION; DOES NOT START WHEN COLD + PTO shaft 540 rpm front and rear + Front linkage with side shift Kjdpfx Adjxxvwgewowt + Front and rear hydraulic connections + Optional front-, rear-, all-wheel steering + crab steering + Radio/CD + Air conditioning + Jaw-type hitch; 3,500 kg towing capacity; 500 kg vertical load + All-wheel drive + Differential locks + Municipal vehicle from first owner Receive all newly listed vehicles via email – subscribe to our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: excellent (used), functionality: fully functional, power: 36 kW (48.95 HP), overall weight: 2,100 kg, fuel type: diesel, color: orange, Year of construction: 2014, operating hours: 817 h, Equipment: all wheel drive, For sale: A540 DiXL V-2203 Spider – Professional Chipper in Excellent Condition Operating hours: only 817 First registration: Ex-government vehicle from Germany, decommissioned since 2022 Condition: Very well-maintained, fully functional Maintenance: Professionally serviced by authorized workshop Last major service at: 769 operating hours Special feature: No exhaust aftertreatment system – ideal for straightforward operation and maintenance Technical Specifications: Model: A540 DiXL V-2203 Spider Drive engine: Kubota V-2203 (diesel) Power output: 35.9 kW / 48.8 HP Engine type: 7 DF 5859 Max. feed opening (W x H): 210 x 190 mm Chip length: Infinitely adjustable up to 20 mm Number of blades: 2 (plus 2 spare blades included) List price (new): €74,000 Kwedpoxq Sa Uefx Adwst Chassis & Mobility: Crawler chassis with hydraulic adjustment Height adjustment: up to 300 mm Width adjustment: up to 420 mm Leveling adjustment for uneven terrain Diesel tank: 30 liters Exceptionally off-road capable and versatile in use Conclusion: This A540 DiXL is the ideal machine for professional forestry and landscaping applications. It impresses with its robustness, ease of use, low operating hours, and excellent technical condition. The last major service was completed at 769 operating hours – the machine is therefore ready for immediate use. No exhaust aftertreatment – making it particularly low-maintenance and easy to operate. Viewing and test operation available by appointment.

Condition: used, power: 10 kW (13.60 HP), first registration: 09/2013, overall weight: 2,300 kg, color: red, maximum load weight: 5,000 kg, driver cabin: other, gearing type: other, emission class: none, Year of construction: 2013, * German equipment * Condition as shown in the photos * Only 6,426 operating hours * Link to video: ?v=q3Q39J2ZX20 * Dücker MK25 mower combination consists of base unit, RSM mower & DUA800 arm * We will gladly send you a video of the MK25 mower combination * Complete documentation * Dücker MK25 mower combination, year of manufacture 2013 * Mower combination consisting of embankment mower and verge mower on arms. For municipal carrier vehicles and tractors with municipal plate sizes Gr. 3 and 5. Operated via CAN-BUS system using two joysticks, a multicontroller, and a touch display. Usable on both left and right side. Driven by PTO shaft or vehicle hydraulics. Foldable for transport – transport width 2.50 m. * DUA 800 arm with 3-part boom and telescopic section. Reach from vehicle center up to 7.80 m. Hydraulic lateral shift up to 1.60 m. Suitable for right and left operation. Swivel angle 270°. Standard arm relief. Float position. VMS 1200 flail mower head, working width 1.20 m. * RSM arm: Computer-assisted control with automated buttons via control panel. Optimal for mowing around guide posts, signs, and trees. Reach from vehicle center up to 3.60 m sideways and 3.20 m forwards. Conversion between right and left operation possible. TMK 1300 flail mower head, working width 1.30 m. Automatic tilt adjustment. * Working width: 1.2 m | 1.3 m. Weight: 2,300 kg. Drive: PTO shaft/vehicle hydraulics. Attachment: municipal plate size 3 | municipal plate size 5. Reach: 7.80 m | 3.60 m. Arm swivel angle: 270°. Hydraulic lateral shift: 1.6 m. Maximum PTO speed: 710 rpm. Required vehicle hydraulic capacity: minimum 68 l/min at 340 bar. Transport width: 2.5 m. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Kjdpfxsxl Snuo Adwswt Our offer generally DOES NOT include new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and test of the item to avoid any misconceptions about the condition and suitability for the buyer. Viewing and testing are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. No liability is accepted for errors or incorrect information in this offer. The buyer is obliged to independently confirm the condition and features of the equipment/vehicles. Subject to prior sale, changes, and errors.

Condition: new, Year of construction: 2022, working width: 3,000 mm, Cutter bar: Discs | Claas Rear Disc Mower Disco 320 C Stock item from 2023 Disc mower with tine conditioner 3.0 m working width 1130 kg net weight with MAX CUT cutter bar 7 disc modules with 2 blades each incl. quick blade change 1000 rpm PTO speed Mounting category II | Internal No.: 11054146 Kodpfx Asxf U N Ujdwjwt

Condition: excellent (used), functionality: fully functional, power: 17.65 kW (24.00 HP), fuel type: gasoline, fuel: super 95, gearing type: other, Year of construction: 2023, AGRIA 9600 - 112 !!! 2nd Generation New Model !!! Remote-controlled mulch mower with 112 cm rotary mulching deck This AGRIA 9600-112 mower is a 2023 model with only 304 operating hours according to the meter and is in very good overall condition with normal signs of use and wear. Customer service has just been carried out. Kedpfjxa Ar Tox Adwowt The current RRP is €44,900. Net price: €26,806 // Gross price: €31,900 - Inspection / test drive welcome! - Nationwide shipping for €400 via freight forwarding! - Financing / leasing can be individually requested.

Condition: excellent (used), functionality: fully functional, power: 29.42 kW (40.00 HP), overall weight: 1,200 kg, fuel type: diesel, Year of construction: 2013, operating hours: 1,127 h, MC Connel Robocut / Energreen Robogreen Kwodpfew A Nn Ajx Adwjt Radio-controlled mowing crawler / large-area mower / embankment mower Technical information according to manufacturer: - 40 HP 3-cylinder Isuzu diesel engine - 2-stage hydrostatic drive (0–4 and 0–7 km/h) - Emergency stop - Slope capability up to 55 degrees - Hydraulic output for mowing rotor (L/min): 50 - Working pressure (bar): 200–350 - Autec model control system - Machine weight incl. attachment (kg): 1040 Attachment: HEAD-130 - Flail mower rotor with 1.30 m working width including floating position, fitted with Y-blades - Mowing rotor weight (kg): 160 - Flail rotor speed (rpm): 3000 This Energreen Robocut was manufactured in 2013 and, according to the meter, has 1,127 operating hours. It is in very good overall condition, showing the typical signs of use and wear for this class of machine. Recently serviced with major maintenance and extensive overhaul. Sale as a used machine, excluding return, warranty, and guarantee. Net price: €32,500 // Gross price: €38,675 - Viewing and test drive possible by arrangement - Nationwide shipping can be organized; costs depend on distance - Financing and leasing can be arranged individually

Condition: new, Year of construction: 2025, working width: 3,000 mm, Mower Bar: Disc | CLAAS Disco 3150 F Exhibition machine, unused Year of manufacture: 2025 Kedpfxowuhice Adwewt Technical data and equipment: 3.0 m working width Low-speed concept – speed reduction to 850 rpm MAX CUT cutter bar Quick-change blades Two-dimensional ground adaptation Weight: approx. 685 kg | Internal no.: 11258080

Condition: new, Year of construction: 2024, operating hours: 1 h, working width: 9,500 mm, Cutter bar: Discs | CLAAS Disco 9700 C Contour New from 2024, not yet completed - Large-area mower for rear tractor mounting, Category III - Working width 8.80 m - 9.50 m, hydraulically adjustable - Main frame with optimized center of gravity thanks to angled rearward-mounted booms - Low-speed concept with speed reduction to 850 rpm - Tine conditioner with V-shaped, rubber-mounted steel tines Kwjdpfx Adswbaytewet Equipment: Wear skids 3-point hitch Wide-spreading system 1 3/8" PTO shaft, 6-piece ISOBUS cable External protective covers, hydraulically foldable Automatic slope control Claas Disco 3200 FC front mower available as an option | Internal No.: 11180889

Condition: used, Year of construction: 2005, Wiedenmann 3803 Snowmaster snow plow Year of manufacture 2005 Kwsdpfx Aev Sm Tiedwst 1500mm wide Blade height 650mm Plastic scraper bar Hydraulic pivoting

Condition: new, functionality: fully functional, fuel type: gasoline, Equipment: lighting, New complete Fendt Slicer 310 FKC front mower with conditioner ----- New complete Fendt Slicer 310 FKC front mower with conditioner ----- Neuer kompletter Fendt Slicer 310 FKC Frontmäher mit Aufbereiter Ksdpfx Adjv Ew Drjwewt

Condition: used, Year of construction: 2020, working width: 3,000 mm, Mower bar: discs | SIP towed front disc mower Silvercut Disc 300 F FC Kodpfx Ajv Aqppedwewt Year of manufacture 2020 Cat II attachment bracket with plastic conditioner tines PTO shaft 1000 rpm Quick blade change system 7 mower discs with 2 blades each hydropneumatic relief | Internal no.: 11206597

Condition: used, Year of construction: 2019, SIP rear disc mower Silvercut Disc 300 F FC 3-point hitch Cat II and III with plastic conditioner tines PTO shaft with freewheel and slip clutch Quick blade change system 7 mowing discs with 2 blades each Ksdpfev Aqpiex Adwswt hydropneumatic relief | Internal no.: 11206599

Condition: used, Year of construction: 2022, working width: 3,200 mm, Mower bar: discs | EasyCut R320 Rear mower with discs, without conditioner Year of manufacture 2022 3-point attachment incl. PTO shaft Kedov Aqn Espfx Adwswt Quick blade change can be swiveled upwards | Internal no.: 11251601

Condition: used, mileage: 2,950 km, power: 27 kW (36.71 HP), first registration: 07/2012, fuel type: diesel, color: green, gearing type: mechanical, suspension: other, operating hours: 2,950 h, Equipment: all wheel drive, , diesel all-wheel drive year of manufacture 2012 2,950 operating hours hydrostatic front ride-on mower mower completely overhauled hydraulic basket emptying high emptying hydraulic mower deck lifting automatic differential lock new price €49,709.00 net FOR US, THE CONDITION AND THE GUT FEELING ARE DECISIVE, THE PRICE COMES SECOND. If you have any further questions, Mr. Faller will be happy to help you on the number. //*EXCHANGE, TRADE-IN OR LOAN FOR YOUR VEHICLE AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find more offers on our homepage: The description and data provided do not represent a guarantee and are not binding. The purchase contract that is concluded in the car dealership when the vehicle is purchased is binding. Errors and prior sale reserved! Kedpfjvxkibex Adwjwt

Condition: used, mileage: 4,861 km, power: 44 kW (59.82 HP), first registration: 07/2010, fuel type: diesel, color: green, gearing type: mechanical, suspension: other, operating hours: 4,861 h, number of seats: 1, Equipment: all wheel drive, , diesel all-wheel drive 44 kW Year of construction approx. 2010 4,861 operating hours 1 seat Mower front and side attachment Large area mower Mowing width approx. 3.00 m FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, DEPOSIT OR RENTAL OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You can find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Kwodpfx Adsvidguowot

Condition: used, mileage: 3,900 km, power: 28 kW (38.07 HP), first registration: 07/2002, fuel type: diesel, color: green, gearing type: mechanical, suspension: other, operating hours: 3,900 h, Equipment: all wheel drive, road legal, diesel year of construction 2002 28 kW 3,900 operating hours all-wheel drive Hydrostad front headlights 20 km/h road legal additional control units for sweeper and snow blade good condition new UVV inspection replacement engine Wiedemann front mower year of construction 2007 FOR US THE CONDITION AND THE FEEL OF THE BUILDING IS DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, DEPOSIT OR RETIREMENT OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You will find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Ksdpfjvic D Eex Adwswt

Condition: used, mileage: 1,678 km, power: 14 kW (19.03 HP), first registration: 07/2006, fuel type: diesel, color: blue, gearing type: mechanical, suspension: other, operating hours: 1,678 h, Power steering, year of manufacture 2006 14 kW 1,678 operating hours diesel power steering hydraulic emptying catcher basket hydrostat FOR US THE CONDITION AND THE FEEL OF THE MACHINE ARE DECISIVE, THE PRICE IS IN SECOND PLACE If you have any further questions, please do not hesitate to contact Mr. Faller on the number. //*EXCHANGE, TRADE-IN OR LOAN OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* Further offers can be found on our homepage: The description and data given do not constitute a guarantee and are not binding. The purchase contract concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Kwsdpfx Adovicu Dewet