Hjc

Condition: as good as new (ex-display), Year of construction: 2026, power: 0.75 kW (1.02 HP), S&F Oscillating Screen | Screening Machine Type ASM-75 Demonstration Machine Make: S&F GmbH Type: ASM-75 Screening capacity: approx. 7 - 10 m³/h (depending on material) Fractions: 3 Screening surface: 0,73 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 0,75 kW, 3 x 400 V, 50 Hz L x W x H: 2,000 x 1,100 x 1,100 mm Design: TopLine Machine weight: approx. 600 kg Machine colour: RAL 5015 Sky Blue // Protective housing: RAL 7035 Light Grey Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass Gedsy Sixtepfx Anxjub - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: as good as new (ex-display), Year of construction: 2026, power: 1.5 kW (2.04 HP), S&F Oscillating Screen | Screening Machine Type ASM-150 Demonstration Machine Make: S&F GmbH Type: ASM-150 Screening capacity: approx. 15 - 25 m³/h (depending on material) Fractions: 3 Screening surface: 1.5 m² per screen mesh size Screen decks: 3 pieces Screen mesh size: - 1st screen deck: punched perforated plate screen, D = 40 mm or by arrangement Gusdpfx Asy Sixmenxjb - 2nd screen deck: punched perforated plate screen, D = 10 mm or as agreed Drive power: 1.5 kW, 3 x 400 V, 50 Hz L x W x H: 2,700 x 1,500 x 1,300 mm Design: TopLine Machine weight: approx. 1,200 kg Machine colour: RAL 7043 Traffic Grey B // Protective housing: RAL 3020 Traffic Red Screen inserts freely selectable Design of the material outlet according to customer requirements Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and sawdust - biomass - Wood pellets - charcoal - Waste wood - Bark Wood chip screen | Vibrating screen | Flat screen | Oscillating screen | Screening machine for wood chips

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 19,000 h, load capacity: 12,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,600 mm, fork carriage width: 2,500 mm, fork length: 1,900 mm, empty load weight: 22,000 kg, total length: 5,200 mm, drive type: Diesel, construction width: 5,200 mm, Diesel Forklift Load Centre: 1200 Fork Width: 270 mm Fork Thickness: 75 mm Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyres Type: Pneumatic Guodpfxey Sixge Anxjb Front Tyres Size: 12.00-20 Rear Tyres Type: Pneumatic Rear Tyres Size: 12.00-20 Description: In addition to this Svetruck model, we have around 200 heavy-duty forklifts, compact forklifts, industrial forklifts, and sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing at favourable terms are always possible. We are also happy to buy your used equipment outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with comprehensive advice regarding this 12120-35. P.S.: Our certified forklift workshop specialises in repairs, overhauls, refurbishment, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale. Sideshift, Fork Positioner, Heater, Full Cabin,

Condition: used, functionality: fully functional, Year of construction: 1998, operating hours: 13,049 h, load capacity: 20,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,900 mm, fork carriage width: 3,300 mm, fork length: 2,400 mm, empty load weight: 36,400 kg, total length: 5,900 mm, drive type: Diesel, construction width: 3,300 mm, Diesel forklift Load center: 1200 mm Fork width: 200 mm Fork thickness: 110 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Superelastic Front tires size: 14.00-24 Rear tires type: Superelastic Rear tires size: 14.00-24 Gsdpfx Aey Sixajnxsub Description: In addition to this SMV model, we have around 200 heavy-duty forklifts, compact forklifts, forklift trucks & side loaders in our Hamburg and Gdansk warehouses. Visit our website – sago-online. Leasing and financing on favorable terms are always possible for us. We are also happy to buy your used machine outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this SL20-1200A. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom builds for forklifts from 8 tons upwards. We are also happy to offer your vehicle for consignment sale in our facility. Side shifter, fork positioner, Heater, full cabin,

Condition: used, Year of construction: 2020, operating hours: 31,623 h, laser power: 4,000 W, working length: 3,000 mm, working width: 1,500 mm, year of last overhaul: 2026, Machine Configuration: Standard Equipment: Machine - Working area: 3000 × 1500 mm - Enclosed machine frame - Longitudinal conveyor belt - Motion unit for high-precision processing - Gantry drive in combination with linear direct drives - Cooling unit for machine and laser (water-air) - Work area lighting - Positioning laser diode - Spray device - Automatic nozzle cleaning - Integrated control cabinets - Integrated cabinet - Enclosed beam guidance via laser light cable (LLK) - Machine status light - Ambient operating temperature 5 to 40 °C - Transport and assembly device TRUMPF Laser - Excitation via pump diodes - Laser power control Cutting unit - Single-head cutting strategy - Universal cutting unit with adaptive lens system - Protective glass - Online condition monitoring of protective glass Control - Fast reproduction - SINUMERIK 840D SL control - Ergonomic control panel with 21.5″ wide-screen multi-touch color display - Integrated technology data - Auto shut-off - Programmable selection of cutting gas/pressure - Microweld - Remote support interface - Production planning - Multi-sheet processing - Condition Guide - Cutting Guide Functions - AdjustLine - ControlLine - FastLine - FlyLine - FocusLine - NitroLine Gsdpfx Anjy Sivfexsub - PierceLine - Copper cutting package - Brass cutting package Data transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Light barriers - Multi-chamber extraction system - Machine paneling with certified viewing window, right door Extended Standard Equipment - Compact dust extractor - Support slats made of construction steel - Network installation via remote support Extended Machine Equipment Extended Laser Equipment - External solid-state laser TruDisk 4001 with 1 LLK output Additional Machine Functions - Drop&Cut - Integrated camera 1 for process monitoring Additional Cutting Packages - Highspeed Eco cutting package Extended Machine Equipment - Dust protection for device panel Data transmission - Wireless Operation Point Availability: approx. 6–8 weeks after receipt of order, at the earliest end of June 2026 Price: on request Current location: TRUMPF Reconditioning Facility Netherlands The machine is currently undergoing reconditioning!

Condition: excellent (used), Year of construction: 2013, S016737 MANUFACTURER: ATLAS COPCO MODEL: GA7VSD SERIAL NO.: CAI716650 YEAR: 2013 POWER (kW): 7.5 CAPACITY (m3/min): 1.21 PRESSURE (bar): 13 Gsdpfxoy Sit Do Anxeub OPERATING HOURS (DOC/TOTAL): 46,345 FREQUENCY INVERTER: yes BUILT-IN DRYER: no HEAT EXCHANGER: no COOLED (AIR/WATER): air ON TANK: no DOCUMENTS: no NEW/USED: USED

Condition: new, AUMA GF125.3 i=208:1 4000Nm IP67 Gedpfxsy Sitwe Anxsub

Condition: excellent (used), Year of construction: 2016, MANUFACTURER: ATLASCOPCO MODEL: GA11VSDFF PLUS Gusdpfx Aney Sitqsxsb S/N: API259443 Year: 2016 Power (kW): 11 Output (m³/min): 1.95 Pressure (bar): 12.75 Operating hours (recorded/total): 35695 Frequency inverter: yes Built-in dryer: yes, R134a 0.40kg Heat exchanger: no Cooling (air/water): air Mounted on tank: no Documentation: no Connection: 3/4" New/Used: Used

Condition: new, Year of construction: 2026, MANUFACTURER: ATLASCOPCO MODEL: G11FF S/N: ITJ1036821 YEAR: 2026 POWER (kW): 11 CAPACITY (m3/min): 1.51 PRESSURE (bar): 9.75 OPERATING HOURS (DOC/TOTAL): 0 FREQUENCY INVERTER: no BUILT-IN DRYER: yes, R513a 0.5kg HEAT EXCHANGER: no COOLING (AIR/WATER): air ON RECEIVER TANK: yes, 500 L DOCUMENTATION: yes CONNECTION: 1 NEW/USED: new Gujdsy Sitkepfx Anxsb

Condition: excellent (used), Year of construction: 2011, 16768 MANUFACTURER: KAESER MODEL: SK25 Serial No.: 1015 Year: 2011 Power (kW): 15 Output (m3/min): 2.25 Pressure (bar): 11 Operating hours (DOC/TOTAL): 19238/36933 Frequency inverter: no Built-in dryer: no Heat exchanger: no Cooling (air/water): air Mounted on tank: no Documents: no Connection: 3/4 Guodoy Sitdjpfx Anxeb

Condition: excellent (used), Year of construction: 2014, Foliant 520 HP with feeder Max size: 520 x 710 mm Min size: 250 x 350 mm Max speed: 15 m/min Separator Feeder Working temperatureL 80 - 140 C Available immediately Gsdpfxey Sir Tj Anxsub

Condition: excellent (used), Year of construction: 2008, Used flexo machine NILPETER FA4-8-color Labelpress •⁠ ⁠Age: 2008 •⁠ ⁠Serial No.: F4289 •⁠ ⁠Web Width: 420 mm - 16.5 inches •⁠ ⁠Servo Driven •⁠ ⁠8 x Flexographic Print Units •⁠ ⁠8 x UV Dryers System from GEW •⁠ ⁠Labelshifter •⁠ ⁠Web Control •⁠ ⁠Splicing Table •⁠ ⁠Die Cutting •⁠ ⁠Die Cutting Stations •⁠ ⁠Maximum Rewind Diameter 1000 mm – 40“ •⁠ ⁠Video Monitoring BST •⁠ ⁠Turn Bar •⁠ ⁠Automatic Register •⁠ ⁠Prints Film 25-300 Microns (3 Options: Folie or Paper or Carton) Gujdpoy Sirtsfx Anxsb •⁠ ⁠And tools (Magneticcylinder, Printingcylinder, Aniloxcylinder etc.) In production Available immediately

Condition: good (used), table width: 260 mm, table length: 1,120 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 90 rpm, – ISO40 – 90–2000 rpm – Table 1120 × 260 mm – Automatic feed on X, Y, and Z axes – Rapid traverse – Digital readout on 3 axes Gedpfx Ajy Sirasnxjub – Quill – Milling head is swiveling – Lighting – 400V

Condition: good (used), Year of construction: 1990, Headop Smyth 55 Max format: 310 x 550 mm Min format: 60 x 120 mm Max speed: 125/min Number of openings: 6 on top 1 on bottom Weight: 900kg Available immediately Gjdsy Siq Nopfx Anxjub

Condition: ready for operation (used), functionality: fully functional, The machine is currently in storage and everything is operational, but it requires maintenance. It comes with plenty of spare parts and toners. Gjdpfx Ajy Siq Ajnxsub

Condition: repair required (used), Year of construction: 2018, functionality: not functional, machine/vehicle number: SG65Q11001, The machine was acquired in working condition. It has not been in operation for a long time. It requires maintenance. Guedpfxey Siqis Anxeb

Condition: used, Currently in use in Zaventem, Belgium. In very good condition. Guedpjy Siqcofx Anxsb

Condition: ready for operation (used), functionality: fully functional, mileage: 88,000 km, first registration: 01/2021, fuel type: diesel, fuel: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,500 mm, loading space width: 1,765 mm, loading space height: 1,700 mm, Year of construction: 2021, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), fog lights, sliding door, soot filter, traction control, Renault Master L1H1 📅 Registration: 01/2021 📍 Mileage: 88,000 km 🔧 Engine: 2.3 dCi – 135 HP Gujdpjy Sip Sofx Anxsb ♻️ Euro 6D Temp Evap Final ✔ Short wheelbase ✔ Low roof ✔ Payload: 840 kg ✔ Cruise control ✔ Air conditioning ✔ Vehicle in excellent condition ✔ Neat loading compartment 🛡 12-month warranty

Condition: ready for operation (used), Theisen & Bonitz 303 stitching unit Booklet Maker / Brochure Finishing Equipped with 2 Hohner stitching heads and delivery belt. 9-station high-pile collating machine Godpfx Ansy Sip Esxoub Complete with 1 pump Max format: 350 x 50 cm

Condition: ready for operation (used), Year of construction: 2000, Müller Martini Amyrs/Prima Year 2000, 8 stations, 1 cover feeder, stitching, three-knife trimming, stacker Production capacity: 14,000 units/hour Min. format: 90 x 105 mm Guedpfsy Siprsx Anxjb Max. format: 320 x 480 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 3928-001, cutting width (max.): 1,150 mm, The machine is in good condition. It is currently in storage in Turkey. Gsdpfx Asy Sipljnxjub

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1989, Complete concrete block production line Manufacturer: Schlosser Control system completely renewed in 2019 Production of paving stones, grass pavers, etc. Drying unit Gsdpfx Asy Sin Uenxoub Palletizing system

Condition: ready for operation (used), Year of construction: 2011, Omga Double Mitre Saw TR2A NC with semi-automatic operating cycle and pneumatic control Motor power: 2.2 kW per unit Total power: 5.02 kW Workpiece dimensions for straight cuts Height: 80 mm or 90 mm Depth: 145 mm or 132 mm Godey Sinzepfx Anxsub Workpiece dimensions at 45° Height: 80 mm or 90 mm Depth: 102 mm or 93 mm Min. length straight: 225 mm Min. length 45°: 385 mm Max. length: 2800 mm Saw blade diameter: 300 mm Motor speed: 3000 rpm Space requirement: 3830 x 1100 x 1600 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, Concrete slab production complete production line Gusdpfjy Sinnsx Anxsb with pallet manufacturing

Condition: excellent (used), functionality: fully functional, Roller conveyor with a length of 5 m, with the option to disassemble it into smaller elements for transport (possibility of cost-efficient shipping within the EU) Gedjy Sinhjpfx Anxsub