Used mounting technology for sale (153)

Condition: new, NEW VARIOUS BEARINGS SET + PRESSURE GAUGES Hedpfx Aewq Rmijh Defr

Condition: like new (used), Year of construction: 2022, functionality: fully functional, NC joining module from Kistler NCFH 30 400 300 B H C G 30 kN Brake 18 Nm Year of manufacture according to seller: 2022 Comes from a test setup for pressing battery cells. This means it has only been used a short time. Includes control cabinet, joining module (including sensor as shown), and monitor. Hjdpfx Ajwhvrreh Djfr Please note: The parts should be complete, but some of the cables have been cut off. Unfortunately, a circuit diagram is not available.

Condition: used, Year of construction: 2008, Palletizing system EROWA EASY UPC 300 Hfjdpfx Ajwptbyjh Dor n° 10 PALLET 320 X 320

Year of construction: 2017, condition: used, functionality: fully functional, 1 pc. JUKI KE 3010 AL Pick & Place with feeder trolleys 1 pc. JUKI KE 3020 VAL Pick & Place with feeder trolleys Available feeders: 8 x 2mm pitch* 140 pcs. * Types: CF05HP and CF03HPR 8 x 4mm pitch * 240 pcs. Types: CF081E 12mm 30 pcs. * FF12FS 16mm 30 pcs. * FF16FS 24mm 14 pcs. * FF24FS 32mm 3 pcs. * FF32FR-OP 44mm 4 pcs. * FF44FR-OP 56mm 1 pc. * FF56FR-OP If you are interested, we are available to answer your questions at any time. Hfjdpfx Aow R Ulbsh Djr

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, MPM AccuFlex Stencil Printer Stencil Printer The MPM AccuFlex is an automatic stencil printer designed for medium-volume, high-product variety printing. Maximum PCB size: 584 mm x 508 mm (23" x 20") Minimum PCB size: 75 mm x 50 mm (3" x 2") PCB thickness: 0.8 mm to 5.0 mm Maximum PCB weight: 4.5 kg Maximum component height below the PCB: 15 mm Transport speed: Adjustable Transport height: 860 mm to 960 mm from floor Print speed: 5 mm/s to 200 mm/s Hjdpfx Asv T T Dkoh Dofr Print area: 559 mm x 498 mm Stencil frame size: Standard 737 mm x 737 mm (29" x 29") 240 V AC, 50/60 Hz Compressed air supply: 0.63 MPa (6.3 bar) Dimensions (H x D x W): 1575 mm x 1448 mm x 1314 mm mm Weight: 700 kg

Year of construction: 2019, condition: as good as new (ex-display), Magnetic palletizing system Hjdpfx Aoff Hgdoh Dsfr 820x820 Recording surface pneumatic steering More details on request, at best by telephone

Year of construction: 2010, operating hours: 63 h, condition: used, functionality: fully functional, incl. Chilly 45-S cooling unit Hjdpfx Ahjwtnxzs Dsfr

Condition: ready for operation (used), Year of construction: 2009, Parts magazine / conveyor belt Manufacturer: Cefla / Delle Vedove Loading magazine for profiles, parquet, and boards Belt width approx. 300 mm Part length approx. 1000 - 2500 mm Hfodswxwx Iopfx Ah Der Feed motor approx. 0.55 kW Dimensions approx. 2500 x 600 x 1500 mm (LxWxH) Weight approx. 250 kg

Year of construction: 2012, operating hours: 45,517 h, condition: used, Yamaha stencil printer Hsdpfxsudk Dwj Ah Defr

Year of construction: 2006, condition: excellent (used), functionality: fully functional, FUJI AIM flexible placer with MFU feeder cart 4 placement heads (H12 S- H12S- H04- H01) Tray Unit L Type approx. 3,200 operating hours / demo machine Inspection possible by appointment Hfedpew Rz Trjfx Ah Dor

Condition: used, functionality: unexamined, Year of construction: 2015, MAGAZINE LOADER, magazine loading system, magazine loader, shuttle magazine unloader, magazine feeder, magazine unloader, connecting conveyor, magazine loading system for large circuit boards, destacker: YJ LINK ALD-CE SINGLE MAGAZINE LOADER Working height: 950 +/-20 mm Working width: 250 - 510 mm Size: 1400 x 1420 x 1830 mm (WxDxH) (2x) YJ LINK magazine loading system for large circuit boards Hodjv Hpbljpfx Ah Dofr Size: 1500 x 2850 x 1830 mm (WxDxH) YJ LINK ALD-CE magazine loader This device is located at the beginning of the SMT line. It transfers printed circuit boards (PCBs) stacked in a magazine rack to the downstream machine one at a time using a pneumatic pusher. Touch screen (control panel) Controlled by PLC (Programmable Logic Controller) SMEMA interface YJ LINK AUD-CE Shuttle Magazine Unloader Shuttle Magazine Unloader Located at the end of the SMT line, this device consists of a combination of a single shuttle and a double lifter. It stacks printed circuit boards (PCBs) one at a time into an empty magazine rack using a pneumatic pusher mounted on the single shuttle. LED tower lamp (with buzzer) Touch screen (control panel) Controlled by PLC SMEMA interface Integrated single shuttle conveyor YJ LINK ADL-CE Magazine Feeder The YJ LINK ADL-CE is an automatic magazine feeder used in SMT production lines to efficiently load printed circuit boards (PCBs) into magazines. YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ACC-CE Connecting Conveyor Size: 1500 x 610 x 950mm (WxDxH) YJ LINK AMB-CE Magazine Unloader YJ LINK AMB-CE is an automatic magazine unloader used in surface mount technology (SMT) to efficiently unload printed circuit boards (PCBs) from machines and stack them into magazine racks YJ LINK ADL-R90 Destacker Destacker ￭ LED tower signal light (with buzzer) ￭ Touch screen (operator panel) ￭ Controlled by PLC ￭ SMEMA interface ￭ 40 pcs stacking capacity at 1kg ￭ Safety light barrier on the screw ￭ Automatic width adjustment ￭ Double plate structure Transport height: 950mm ± 20mm Color: EX8816(S)-SR-WH020 (KCC) Conveying direction: Left to right / Right to left Fixed rail: Front / Back PCB edge: 3mm PCB thickness: 1.0mm ~ 2.0mm Conveying speed: 200mm/s Conveyor belt: Antistatic 10¹⁰ ~ 10¹², temperature: 70˚C Air supply: 0.5Mpa (5 bar) Air consumption: 4 ℓ/min Power consumption: 430W Power supply: 230V / 50~60Hz, 1 phase

Year of construction: 2004, condition: good (used), functionality: fully functional, Selling 1 Juki FX-1 and 2 Juki FX-2 from current production. Please contact me if you have any questions. Hfjdpfjvk R H Rjx Ah Djr

Year of construction: 2016, condition: excellent (used), Automatic X-ray inspection For the inspection of BGA, QFN, THT, LED, LGA, and other solder joints, visible or hidden. Other: Including offline station and repair station OS: Windows 7 Ultra-high speed line-scan CCD detectors Inspection area: 450 mm - 400 mm Image capture: 2D, 2.5D, 3D (layer images with planar CT) PCB dimensions: 60 - 450 x 50 - 400 mm AXI resolution: 6 - 30 µm / px AOI: Camera field of view: 42 mm x 42 mm Resolution: 21 µm Inspection height: -3 to 7.5 mm Optics: telecentric Transport height: 950 mm +/- 25 mm Interface: SMEMA Hedpfx Aewpuadoh Defr Width adjustment: automatic

Condition: good (used), Year of construction: 2011, functionality: fully functional, The BF-Comet is equipped with Saki's unique line-scan camera image acquisition concept and vector analysis and can be used for all inspections (SMD, THT), both before and after soldering. Due to the very short cycle times, the operator practically never has to wait. This makes Saki technology ideal for benchtop use. The high-precision line-scan camera forms the central unit of the Saki image acquisition concept. During image acquisition, the circuit board is moved in one axis under the stationary optical system. The line-scan camera records line by line, with each line being recorded four times, alternating with the different light sources. After a few seconds, the image of the entire circuit board is available for inspection and programming. Variable and constant illumination methods are essential for reliable image analysis. The Saki system includes three central, variable units: coaxial (top), offset (side), and low (low) light sources. Thanks to the line scan concept, every component, regardless of its location on the circuit board, is always at the same distance and angle to the respective illumination. This results in evenly illuminated images for evaluation. The so-called top light unit is a 100% coaxial light source, which is introduced into the vertical camera view by a half-mirror. This creates a shadow-free image for 2D viewing. This is especially important for reliable solder joint inspection and inspections between tall components. The MLT illumination provides a clear, color-coded display between tinned/soldered and non-tinned surfaces. Surfaces without tin or with poor wetting are displayed in red tones and can thus be reliably detected using color recognition algorithms. Foreign objects such as "lost" components, solder balls, scratches, damage, etc. can be detected with Saki's ECD function with a little additional programming effort. Since the image of the entire circuit board is already available, this function only requires a few seconds of additional inspection time (computing time). Foreign Body Inspection - Automatic Library Creation. Hfsdpfxewbgwro Ah Djr Saki's KPK function automatically creates a library for unrecognized/new components with a presence inspection tailored to the assembled components. - Automatic X/Y coordinate generation for THT solder joints. If the layout data (CAD) for the THT solder joints is missing, this function can be used to automatically generate a library using an unsoldered and a soldered circuit board. - Programming Wizard The software offers a wizard to guide the programmer through the entire programming process, from importing the CAD data, aligning the data, and assigning libraries.

Year of construction: 2012, operating hours: 34,463 h, condition: used, Yamaha stencil printer Hjdpfx Asudk Dkoh Dsfr

Condition: good (used), Year of construction: 2020, Inline reflow soldering under vacuum System was in operation until dismantling Available now; commissioning can be carried out by the manufacturer after consultation. Serial number: R036A-20D0012 Year of manufacture: 2020 Dimensions: 8,063 x 2,205 x 1,969 mm (L x W x H) Weight: Approx. 5,000 kg Rated power: 138 kW Continuous power during operation: approx. 14 - 25 kW Extraction capacity: 2 nozzles, 400 m³/h each Transport system: Working width: 100 - 630 mm, center support PCB length: 120 - 400/600 mm Process zone: Inlet 1,011 mm Heating zone with vacuum 4,600/4,750 mm Cooling zone 1,400 mm Outlet 730 mm Heating system: Hsdpov Inw Uofx Ah Defr 4 cooling zones 11 heating zones, including: 9 convection heating modules Top/bottom preheating zone 2 convection heating modules top/bottom soldering zone Vacuum chamber: 400 mm Chamber volume: approx. 110 l / 150 l Pump power: up to 5.3 kW Ultimate pressure: up to 10 mbar

Condition: used, Good day, I am selling a used ASYS MPS 100. The unit is fully functional and was used in an SMT production line for both SMD and THT assemblies. If you are interested or have any questions, feel free to contact me. Hsdpjww Ewvsfx Ah Defr

Year of construction: 2023, condition: good (used), Nutec Tensert 2503 variant M2 Hfedpfx Asw Hp Anoh Dor Key parameters: • Adjustable PCB width: 30–250 mm, adjustable via screw mechanism • Max. PCB length: 330 mm • 50 slots: 3 mm deep, 5 mm wide, 10 mm pitch • Stackable & reversible (long or short edge) • Material: conductive polypropylene (ESD safe) • Temperature resistance: up to 130 °C • Dimensions: approx. 354 × 320 × 563 mm • Weight (with locking system): approx. 6.5 kg • Transport lock system included

Condition: excellent (used), Year of construction: 2012, 9 heating zones 2 cooling zones (1 setting) Center support Electric width adjustment (programmable) 5 mm link chain conveyor Flux capacitor Hfjdpfx Ahjv U Acxs Der Interface: SMEMA HC2 Controller

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Model NPS510E Fully automatic in-line stencil printer with 2D paste inspection - Max. PCB size: 510x450mm - Max. stencil size: 736x736mm - Cycle time (without printing): 8 seconds - Alignment repeatability: 12.5µm at 3 Sigma - Squeegee pressure: 4-30kgf - User interface: Windows - Dimensions: WxDxH 1.20 x 1.40 x 1.50m; 900kg Included: - Stencil cleaning system, wet/dry/vacuum Hfodpfxsvuprms Ah Djr - CCD camera for 2D inspection of paste print and stencil - Automatic conveyor belt width adjustment - Support block - Support pins - 2 metal squeegees

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Hfedpfx Asudk A Hoh Dor

Condition: good (used), Year of construction: 2008, functionality: fully functional, Year of manufacture 04/2008 400 mm working width Finger conveyor Lifting and lowering station Spray fluxer Dynamic preheating at the bottom Convection heating Hfsdpfxjv Ta Hlo Ah Djr

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Hodpfsudk Amex Ah Dsfr

Condition: used, Year of construction: 2010, functionality: fully functional, Reflow oven from Rehm Hodpfx Asudk Agsh Dofr

Year of construction: 2012, operating hours: 63,311 h, condition: used, functionality: fully functional, machine/vehicle number: Y27639, Fitter fully functional Hfsdpfx Aeudkz Noh Dor