Used winder for sale (148)

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi11, Stretch Winder Synthesi Freezer -30 IP65 TECHNICAL DETAILS Turntable / base frame / Ø 1500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) Hjdjz Iq I Ajpfx Airew F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Lybra02, LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Hodpfxez Iprtj Airow Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally available: FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Optionally available with a manual line formation. Other systems available immediately from the Ludwigsburg warehouse.

Year of construction: 2016, condition: good (used), functionality: fully functional, machine/vehicle number: 160504PW1-349, We offer this used YOUNGSUNPACK EUROPE MH-FG-1000AS machine, type Pallet Wrapper/Stretch Wrapper, manufactured in 2016. Manufacturer: YOUNGSUNPACK EUROPE Model: MH-FG-1000AS Year of manufacture: 2016 Technical condition: good Hsdezlqa Aspfx Airew Category: 543 Machine type: Pallet Wrapper/Stretch Wrapper If you have any questions or require further information, please send us a message or contact us by phone.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 001-549, TECHNICAL DETAILS Hsdpfx Aioz Agxijrjw Stretch film Maximum film height: 500 mm Maximum roll diameter: 250 mm Core diameter: 76 mm Film thickness: 10–35 µm

Year of construction: 2000, condition: excellent (used), functionality: fully functional, power: 0.5 kW (0.68 HP), overall weight: 500 kg, total length: 2,409 mm, total width: 1,500 mm, total height: 2,385 mm, input voltage: 380 V, input frequency: 50 Hz, input current: 2 A, film width: 500 mm, product height (max.): 2,100 mm, product width (max.): 1,200 mm, type of input current: three-phase, Equipment: documentation/manual, The pallet strapping machine is in excellent condition and fully functional. It comes with the original documentation, as well as a certified appraisal report. Hsdez Nilqopfx Airew Along with the pallet strapping machine, 15 rolls of film will be delivered.

Year of construction: 2025, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission4, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) Hjdpfxsz Inavs Airsw F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Condition: good (used), Pallet wrapping machine, stretch wrapper for pallets, special version for use with manual pallet trucks – used: Hsdpfjz Sfaqjx Airow Price ex works: €4,750 (net), including loading! Very robust machine! Type HAD 1500NH Year of manufacture: 2012 No. 274 with the following standard features: 2 programs (normal and cross wrapping) Photo cell (can be switched on and off) Freely selectable bottom and top wrapping Mechanical film brake Soft start of the turntable Adjustable film inclination, max. pallet height 2200mm Turntable diameter 1500mm Programmable turntable speed Safety light barrier on the open turntable Condition: very good Available: immediately Location: 91177 Thalmässing Photo is similar:

Year of construction: 2026, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,400 mm Max. pallet dimensions: 1,650 x 1,650 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,400 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display Hedpfx Aoz Iqp Toirsw F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other Hodpfxsz Ipx Hj Airow F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, product height (max.): 2,200 mm, product length (max.): 1,500 mm, product width (max.): 1,500 mm, input voltage: 230 V, working height: 2,200 mm, CYKLOP CST 212 pallet wrapper, semi-automatic packaging machine Foiling of palletized goods with stretch film, for loads of different sizes and weights. Manufacturer: CYKLOP CST 212 Type Wrapping machine (Avvolgitore) Year of manufacture: 2020 Turntable diameter: 1600 mm Turntable speed: 4 - 12 rpm Turntable speed can be adjusted in several stages The starting height of the foiling can be adjusted in several stages Pallet height sensor Rainproof program Load: Length/width: Max. 1000x1200 Height: 2.2 meters Pallet weight: max. 2000kg Weight: 645 kg Frequency: 50/60 Hz Hedpfx Aisw Tzdvjrew Total current consumption: 10 A Voltage: 230, 1-Phase, 50/ 60 Hz Power supply: 0, 85 kW

Condition: good (used), Year of construction: 2005, functionality: fully functional, working width: 1,300 mm, passage height: 2,000 mm, total length: 2,500 mm, Automatic pallet wrapping machine with automatic plastic top sheet application and film wrapping around the load. 1350 mm powered roller conveyors, 18 meters in length, max. pallet size 2500 x 1300 mm, max. height 2000 mm. Hedsy U Iguepfx Airjw

Condition: excellent (used), Fully automatic pallet wrapper with film pre-stretching Inventory No. 3974 Hodpfxsz Rq Rwj Airew Manufacturer: Matco Type: B 200 * Year of manufacture: 2016 * Turntable positioning via fixed stop * Number of bottom and top wrapping cycles * Turntable diameter: 2000 mm !!!! * Max. wrapping height: approx. 2700 mm !! * Own weight: approx. 550 kg * Very good condition * Suitable for Euro pallets and block pallets!!! * Ramp

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S23SynthesiWaage03, Exhibition machine, like new. SYNTHESI integrated with scale Pallet weighing system integrated in the machine FILM SLIDE TYPE “FE” (ELECTROMAGNETIC BRAKE) Foil application tension electronically controlled via control unit Foil specification Max. outer diameter Ø250mm - height = 500mm - core Ø76mm Standard connection values: 230 V - 1PH+N+PE - 50/60 HZ TECHNICAL DETAILS: Turntable 1500mm (Optional 1650mm) Wrapping height (pallet included) 2,200 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL Hodpez Ipdvefx Airew All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Other systems available from the Ludwigsburg warehouse.

Year of construction: 2000, condition: used, Robot wrap - pallets. Working (see video), but batteries to replace. Original battery: brand FIAMM drawing 717701 serial number 28023 nominal tension V 24 Capacity in Ah in discharge regime in 5 hours Ah 110 Hedpfxjzgg Dae Airow Weight in running order Kg. 122 Cost of new battery branded FIAMM about Euro 700 + VAT. We can order it ourselves or leave the customer the choice of potentially other cheaper brands. Max pallet height:: cm. 210

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, Key Facts: Lachenmeier Hood Stretcher Pallets per Hour: 50+ Frame Size: 3,000 x 2,400 mm Max. Load Height: 1,500 mm Max. Load LxW: 1,200 x 1,000 mm Stretch Hood Film: 1 Special Features: Hjdpfx Aisvb Tz Eerjw refurbished stretch hood machine long-lasting spare parts by RHM Packaging Availability Now in stock at RHM

Year of construction: 2026, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm Hodpfx Aez Inapsirew ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi07, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Hedpez Iqtfjfx Airsw Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) Hjdpfjzn Ipysx Airow • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23EVA01, Stretch wrapper EVA TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Options: Turntable 1650mm ramp mounting frame Light scanner for black products Other systems available from the Ludwigsburg warehouse. Hedpfx Aisz Ip S Horsw

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 50062, Siat WR100-M mobile robot wrapping pallets vertically, H2100, serial 50062, serial number FAMROBOTWR100, year 2006, with battery charger. This robot is in good working condition Equipped with key and 2 new batteries, new inductive side sensor. Weight: 350 kg Dimensions (L x W x H) 3.30 x 1.50 x 2.95 M Rotary plate 1500 MM DIAMETER Rotation 10 RPM DEPENDING THE SELECTED PROGRAM Hodpfx Ajw E Epboirsw Reel MAX. 500 MM WIDE X 300 MM DIAMETER Film MAX. 1800 MM HIGH Pallet weight MAX. 2000 KG Pallet dimensions MAX 1000 X 1200 MM Power 1 KW MAST Wrapping height up to: 2800 mm. PS HEAD Pre stretch 250% Film stretching from 1 m to 3.5 m. Stretching occurs in the head, not on the load photocell. NUMBER OF PALLETS / 1 BATTERY CHARGING up to 120 Euro pallets: H 1800 mm. WRAPPING FUNCTIONS: 4 programs programmable by the operator: Up-down cycle; Up-only cycle; Down-only cycle (you can set the starting height of the cycle); Cycle for attaching a foil hood. Adjustable number of wraps at the bottom of the pallet number of wraps at the middle of the pallet; Adjustable number of wraps at the top of the pallet; Adjustable wrapping speed up to a maximum of 83 m/min; Adjustable speed of the foil trolley rising and falling; Adjustable tension force via an electro-magnetic brake; Pre stretch 150, 200, 250% Video: Price Euro 3.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2004, condition: good (used), functionality: fully functional, Wrapping machine Manufacturer: Böhl Type: BSB-45 SX-2 Year of manufacture: 2004 Total power consumption: 2.5 kW Product dimensions: Width: 5-250 mm Height: 5-250 mm Length: 600-6000 mm Hedpfx Aoznczdjirjw Machine weight: 950 kg Includes roller tables: 2 x 4 m

Year of construction: 2026, condition: as good as new (ex-display), machine/vehicle number: S23Synthesi3, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Optionally possible: FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Hodez Ipcljpfx Airjw Film pre-stretch ratio set to 200% Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge.

Year of construction: 2019, condition: excellent (used), Automatic pallet wrapper Film pre-stretching Hsdpfxezadbws Airow Inventory no. 3828 Manufacturer: Certis Type C-ONE * Year of manufacture: 2019 * Turntable positioning via Fix-Stop * Number of top and bottom wraps * Turntable diameter: 1650 mm * Max. wrapping height: approx. 2200 mm * Own weight: approx. 450 kg * Suitable for Euro pallets and block pallets!!! * In very good condition

Year of construction: 2022, condition: ready for operation (used), A pallet wrapper with shrink hood OK-Pack is available. Pallet dimensions X/Y/Z: 1200mm/800mm/2000mm, max. pallet weight: 1500kg, machine dimensions X/Y/Z: approx. 2700mm/1800mm/2600mm, control system: Siemens PLC S7-1200/214C-KP300. Documentation available. An on-site inspection is possible. Hsdpfx Aijx Srpnerow

Condition: used, Second-hand machine Features and technical specifications: - Film material: LLDPE - Film width 500 m - Max. roller diameter 250 mm - max. film thickness 35 µm - Roller core diameter 76 mm - Max. pallet length 1,675 mm - Max. pallet width 1,675 mm - Max. pallet height 2,200 mm - Max. pallet weight 1,500 kg - with access ramp - Dimensions approx. 3000 x 2000 x 3200 mm - Weight approx. 750 kg Hjdpfxozlbt Hs Airow Availability: at short notice Storage location: 63934 Röllbach