Pillar Type Swivelling Crane

Abus TK-S 125-4/3

Condition: new, feeder 4 rollers roller DM 120 mm Blodpfoh Dikwjx Addsr roller width 60 mm motor power 0,75 kW motor speed 1.400 U/ min feeder speed 3 - 18 m/min, variable weight approx. 37 kg without stand optional with stand ‘standard’ or ‘stand 1050’ Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Ostas Hydraulic Profile Ring Bending Machine OPK 45 - 3 Special equipment included in the price: 3 driven rollers Digital display Incl. standard roller set steel Description Hydraulic / motorized ring bending machine horizontal and vertical applicable with 3 driven rolls 3 rollers motor driven Feeding of the upper roller hydraulic Rollers are hardened Left/right rotation by means of foot pedal Shaft 50mm roller-Ø top 158 mm roller-Ø bottom 158 mm Speed 4,5 m/min Motor power : 0,75 +1,5 kW Electrical connection 400 V According to CE standard Weight 420 kg Bodpeg Tzbwjfx Addslr

Condition: good (used), Year of construction: 2024, Welding turntable KT 300 Load horizontal 300 KG, tilted 150 KG Power consumption 220V, 50 Hz table diameter 450mm height 500mm Tilt range stepless via crank gear motor 0 - 90°. speed 0,3 - 2,5 rpm Incl. foot remote control Bljdpfxjbvk I Ee Addsr Surcharge: Quick release - jaw chuck diameter 300mm, 450.-€

Condition: good (used), functionality: fully functional, Lisec IG-line for double and triple glass units up to 2500 x 1600 mm, year 1993 - 1999, consisting of: RTV-38/16WE, washing machine inlet conveyor, 1993 VHW-16V8, glass washing machine with 8 brushes for low-e, 2 hot water tanks, 2 sand filters, and blower, 1993 RTVB-16/16ST, washing machine outlet conveyor, 1997 Sofsolution LineScanner RTVB-11/16 ST, inlet conveyor frame set, 1997 RSVB-27/16, frame set section, 1997 RTVB-27/16MZ, measuring section for gas filling press, 1997 FPS-25/16U, gas filling press for Argon, 1997 RTVB-22/16ST, press outlet conveyor 1, 1997 RTVB-22/16ST, press outlet conveyor 2, 1997 RTVB-27/16ST, press outlet conveyor 3, 1997 RTVB-11/16, inlet conveyor for cork applicator, 1997 APK-3/16, automatic cork application device, 1997 RTVB-11/16, outlet conveyor for cork applicator, 1997 RTVB-11/16VE, inlet conveyor sealing robot, 1999 VL-1N/16, automatic sealing machine for double and triple glass units, 1999 Bljdpjr Iil Eefx Addjr VLA-25, VL-extension with corner correction rollers, 1999 DOS-1/PU, mix and metering station for PU, including nozzle purching device,1999

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 16, warranty duration: 12 months, SLIDING RACK FOR GLASS M80-16 MANUFACTURED IN 2025/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-16 RACK TECHNICAL DATA Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -16 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 254 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 15 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Bledpfx Ashbduzsddsr Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 14 400 kg Partitions inclination – left or right – depending on assembly Assembly time - 10 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-16 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty We also deliver our racks for glass to the EU countries and other countries.

Condition: as good as new (ex-display), Year of construction: 2018, plate thickness 1,2 mm Blodpfxeraqhxo Addor roll diameter 62 mm throat 100 mm weight of the machine ca. 50 kg dimensions of the machine ca. 560 x 220 x 500 mm Manual bead bending machine Description: - Heavy-duty and stable cast iron construction - Adjustable lower shaft - Special steel shafts - Built in accordance with CE standards

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 1091950, SPECIFICATION Travel X axis stroke 1626mm Y axis stroke 813mm Z axis stroke 762mm Spindle nose to table (max) 889mm Spindle nose to table (min) 127mm Table Length 1626mm Width 711mm T Slot width 16mm T Slot centre distance 125mm Number of Std T slots 5 Max. Weight on table 1814kg Spindle Maximum rating 22.4kW Maximum speed 7500rpm Maximum torque 610Nm at 500rpm Bljdpfxst Dmmvj Addsr Drive system 2 speed geared head Taper BT50 Bearing lubrication Air/Oil injection Cooling Liquid cooled Feedrate Rapids on X 13.7m/min Rapids Y 15.2m/min Rapids on Z 15.2m/min Max. Cutting feedrate 12.7m/min Axis Motor Max. thrust X 24910N Max. thrust Y 24910N Max. thrust Z 24910N Toolchanger Capacity 30 Maximum tool diameter (adjacent empty) 254mm Maximum tool diameter (full) 102mm Maximum tool length (from gage line 406mm Maximum tool weight 13.6kg Tool to tool (avg) 4.2 sec Chip-to-chip (avg) 6.3 sec General Air required 113l/min, 6.9 bar Weight 10,206Kg MACHINE EQUIPPED WITH:- Through spindle coolant Swarf auger Rigid tapping Hard drive Lighting Enclosed Guarding

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 2,134 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 762 mm, controller model: HASS, table width: 914 mm, table length: 2,134 mm, table load: 1,800 kg, overall weight: 11,340 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 7,500 rpm, coolant supply: 15 bar, distance table center to spindle nose: 864 mm, spindle motor power: 22 W, spindle nose: ISO 40, number of slots in tool magazine: 40, tool length: 406 mm, tool diameter: 63 mm, tool weight: 5,500 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, USED ​​vertical machining center with HAAS CNC Bodpfx Aowrfamsddjlr

Condition: like new (used), Year of construction: 2003, functionality: fully functional, total length: 52,000 mm, total width: 24,000 mm, total height: 10,500 mm, input voltage: 400 V, working height: 1,050 mm, overall weight: 2,000 kg, compressed air connection: 6 bar, drill diameter: 180 mm, air pressure: 6 bar, input frequency: 50 Hz, type of input current: AC, power: 2.5 kW (3.40 HP), 8 Sep | Drilling machines METRAL double head drilling machine TD3-2000, year 2003, complete overhauled 2023 Technical data: glass thickness 2-50 mm Bodpfx Ajrg E Hceddslr bore diameter 3-180 mm weight without roller table: 775 kg power supply: 2,5 kW measurements without roller table: 1,3 x 1,7 x 1,2 m measurement roller table: 5,2 x 2,4 m/ height 1050 mm/+-25 mm maximum measurement machine frame to drilling center:

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Tyop GA 250 Blsdpfx Ajpl D Hxodder