Technical data aluminium Portal Crane, stationary type
Manufacturer Schilling Gerätebau e.K., Germany
Type 1321540
Year of construction 2017
Load capacity 1.500 kg
Beam length clear width 4,000 mm
Total beam length 4,100 mm
Suspension point on the bolt min. 1,740 mm
Suspension point on bolt max. 2,990 mm
Total height min. 2.120 mm
Total height max. 3,370 mm
Lower edge of aluminium beam min. 1,830 mm
Lower edge of aluminium beam max. 3,060 mm
N7ia7
Adjustment range of the carrier support 850 mm...
Electric chain hoist hoist
Type: Gantry crane; permanent
Portal length: 16m
Manufacturer: Demag
Btw38hv
Hoist type: PK5N
Lifting capacity: 1000kg
Lifting speed up to 10m / min
Bridge crane, indoor crane, assembly crane, workplace crane
Cip2xeuy
-2x electric wire rope hoist
-Load capacity: 2x 1600 kg
-Bridge load capacity: 3.2 to
-Load capacity: 2x 1600 kg
-Span width: 6.4 m
-Corridor operation
-Dimensions: 2000/6400/H1000 mm
-Weight: approx. 2000 kg
arm length 2.500 mm
weight max. in kg 500 kg
weight of the machine ca. 0,3 t
Bhbalu8qhs
weight max. in kg 1000 kg
arm length 4000 mm
height 3000 Unterkante Ausleger
total column height 3790 mm
swivelling range 270 Grad
W3tu8
weight 560 kg
lifting capacity: 5 t
lift: - mm
Tpsziqmrf
span width: no bridge - keine Brücke mm
driving speed of travel trolley: 20.0/5.0 m/min
Lifting height: 45 m
track width center: 2000 mm
stroke speed: m/min
total power requirement: 16 kW
Two Rail - Travel Trolley
- speed 20,0/5,0 m/min
- rope diameter 8mm, rope length approx.2x48m double strand drum
- classification 2M hook 180mm
- drive on both sides with motor
- internal distance the wheels of the end carriage = 1890mm
- FEM classification 2m
- with...
Electric load lifting magnet 2500kg
Bm3h7bjxd2
see photos and load lifting table
lifting capacity 2 x 5,0 t
lift -- mm
span width 23500 mm
travel of hook 6000 mm
weight of the machine ca. ca. 3,5 t
connected load frequency 400 V
control voltage 230 V
Dowep2in
- with 2 trolleys as cantilever crab 5 to.
- Length shortened to 23.5 mtr.
- Corridor operated
- The crane has 4 wheels, as does the cat
- Roller diameter crane: 400 mm
- Roller diameter cat: 200 mm
- Wheel load at least 30.6 kN max. 77.9 kN
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley
-Barrier width: 120 mm
-Payload: 1000 kg
-Dimensions: 5480/120 / H245 mm
-Weight: 182 kg
Ysstcc
arm length 2.200 mm
lifting capacity 250 kg
height of stroke 2.300 mm
weight of the machine ca. 680 kg
Nwxkz
COLUMN-MOUNTED SLEWING JIB CRANE
weight max. 3,2 t
swivelling range 360/180 degree
arm length 6.000 mm
machine weight app. 2,20 t
consisting of:
column
jib (arm) (6.000 mm)
Bp9d7cotmp
hoist (electrical chain hoist) complete, model ST 3016-8/2-2/1,
capacity max. 3,2 to., hoist electrical driven
electrical swing gear, slewing range limited to 180 degree
incl. current lead components
dimensions (l x w x h):
jib (arm): 4.200 x 1.200 x 1.000 mm
column: 7.000 x 910 mm diameter
hoist: packed on pall...
lifting capacity in kg: 125 kg
arm length: m
swival range : starr °
Arm length: 3250 mm
: 3800 mm
lifting speed - idle lift downwards: > 8 m/min
electr. connected load: 400 V
connection electric: ca. 1,5 kW
protection class: IP 54
dimensions L x W x H: Traverse:3,6x1,7x2,0 m
Wall Travelling Jib Crane
- application: lifting and lowering of loads
- consists of: (similar as shown in the picture)
- electric chain hoist Lifkett with loading hook Ø = 30x100mm, single-stranded, travel distance 1600mm...
Bridge crane from factory relocation.
Lifting gear original SWF 5to, unloaded to 3,45to due to hall statics.
MAN GHH Logistics GmbH
3,45 tons
Length x width x height
Bhq70bpu
3700mm x 2300mm x 800mm
Currently two identical cranes are available.
Price understands itself plus VAT. free loaded camp pouring - dispatch after arrangement and cost assumption possible
Changes / Errtuemer in the technical data and prior sale reserved
The machine is electrically and mechanically tested before sale and rec...
different cranes
C02bgkp0
capycity 125-250 kg
swing 3.100 - 5.300 mm
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley
-Carrier width: 90 - 150 mm
-Payload: 3000 kg
-Chain length: 3500 mm
-Dimensions: 340/270 / H230 mm
Blsc9ljevt
-Weight: 29 kg
height of hook 3.500 mm
arm length 2.400 mm
stroke 1.000 kg
Hvnblop
weight of the machine ca. 1,4 t
2 available
COLUMN-MOUNTED SLEWING JIB CRANE
weight max. 1,50 t
swivelling range 360 degrees
arm length 5.000 mm
machine weight app. 1,50 t
consisting of:
column
Dxpcpu
jib (arm) (5.000 mm)
hoist (electrical chain hoist) complete, model SIE 9F,
capacity max. 1,50 to., hoist electrical driven
electrical swing gear
incl. current lead components
dimensions (l x w x h):
jib (arm): 6.050 x 2.130 x 740 mm
column: 3.540 x 710 mm diameter
hoist: packed on pallet
lifting capacity: 0,25 t
lift: - mm
span width: mm
height lower edge cantilever arm: 3100 mm
jib length load hook end position: 3500 mm
crane classification: H2-B2
swival range : 355 °
cantilever arm length from center column: 3720 mm
lifting height max. hook position: 2400 mm
Lqztj
column diameter: 325 mm
dimensions base plate: 0,6x0,325-0,625 m
total power requirement: 0,9 kW
weight of the machine approx.: 760 kg
dimensions L x W x H: 3,9x0,63x3,85 m
crane control with panel keyboard with ...
You can also make direct contact in Polish.
Beg2pmawpq
weight max. in kg 250 kg
arm length 2000 mm
220fyv
column diameter 220 mm
Total height OK 3000 mm
Total height UK 2500 mm
Overhead crane, overhead crane, assembly crane, workstation crane
-Electric crane
-Bearing capacity 3,200 kg
-Height height 8,000 mm
-Wire speed 4/1 m / min
-Span 6,910 mm
Hs2cqnh2
-Cat and carrier trolleys each 2 speeds
-Gauge 2000 center middle
-Wheel size O mm
-Height lower edge of wheel to hook center mm
-remote control
-Dimensions 7040/2420 / H615 mm
Vetter A8
weight of the machine ca. 600 kg
N3hiz
Bridge crane with Balkankar 3.2 t
Crane length: 12 meters
Manufacturer: Snina Vihorlat
Year of production: 1974
Load capacity of the crane structure: 3.2 tons
Design: two beams next to each other
Including motors for rail travel.
Crane travel speed: 40 m / min.
Rope cat travel speed: 20 m / min.
Rope cat manufacturer: BALKANKAR
Type: T 0153-3,2T
Year of production: 1986
Lifting speed: 8 m / min.
Lift height: 12 meters
Cat weight: 280 kg
Ein0isnbi
Crane weight with cat: 6.5 tons
Volt: 380 V
Ampere: 150 A
charging voltage: 24 V
total power requirement: 3,6 kW
weight of the machine approx.: 100 kg
space requirements approx. LxWxH: 0,5x0,6x0,8 m
Yfelluc
Battery charger for electric forklift trucks, electric pallet trucks
- 3 pieces available
- All 3 devices are equipped with charging cables.
Condition: not checked.
On sale as is!
1x ABUS 25t overhead crane / indoor crane
the crane system has been thoroughly checked and serviced.
Rope guide and rope NEW!
Technical documents, UVV reports and service life calculation are fully available.
Remaining service life -30 years according to last UVV.
Hpnzvll
Hoisting gear:
Type: ABUS GM6250L6-161.41.103 DQA 280
lifting capacity: 25.000 kg
hoisting speed: 0,66 / 4,0 m/min
hook path: 10 m
rope Ø 16.2 mm
trolley ABUS
Scope of delivery:
- 1x ABUS 25t overhead crane approx. 9 m
- 2x rad...
weight max. 40 t
stroke - mm
clamping width - mm
speed 0,75/5 m/min
Cviidbws
total power requirement 5,6/38 kW
Hall crane, crane, electric cable, hoist, winch, winch, tackle, winch, pulley
-Nominal load 3000 Kg
-Lifting speed 9.5 m / min
-Lift height 19 m
Jpaj3fbx
-Dimensions 1530/1000 / H1100 mm
-Weight 840 kg
Demag P
weight max. 30 t
Bm39mb3yst
weight of the machine ca. 17 t
carrying capacity 350 kg.
number of suction cups 6 Stück
suction cup dia. 160 mm
B0xe9sbb
Sawing unit 4 m3/h
voltage 400 V
total power requirement 0,18 kW
weight of the machine ca. 90 kg.
dimensions of the machine ca. 2.200 x 1.000 x 750 mm
Volt: 380 V
Ampere: 50 A
charging voltage: 24 V
total power requirement: ca. 1,2 kW
weight of the machine approx.: 100 kg
space requirements of the machine approx.: 0,5x0,6x0,8 m
battery charging device for electric fork lift trucks, electric fork lifters
4 pcs available
device No. 1 without charging cable
device No.5+30 with charging cable
Fqzkuab
on Sale as is!
i.D.
lifting capacity :0,250 t
Gwft8c
lift:3600 mm
span width:4000 mm
weight of the machine ca.:0,6 t
transport dimensions LxWxH:4,3 x 1,8 x 0,5 m
stroke speed:4 m/min
arm length 9000 mm
weight max. in kg 500 kg
Bobckhclr8
swivelling range 180 Grad
Wall jib crane, indoor jib crane, indoor crane, workstation crane
-for: spot welding gun
-Projection: 4000 mm
-Total height: 1100 mm
-Swivel range: 270°
-with: crane chassis and cable drag shoe
-Transport dimensions: 4000/100/H1100 mm
-Own weight: 100 kg
Vqgtlz3dt
For sale is an electric chain hoist from ABUS
Bjbcxr7wlp
Load capacity 2000 Kg
Load trains 2
lifting speed 6 m/min
Power 2,3 KW
The chain hoist can be inspected on site and its function tested.
weight max 2 t
stroke 8000 mm
Bnh0vlczh7
clamping width Kran mm
-----
WORKING RANGE -CRANE-
Volt: 380 V
Itqsyp3
Ampere: 70 A
charging voltage: 24 V
total power requirement: ca. 1,7 kW
weight of the machine approx.: 100 kg
space requirements approx. LxWxH: 0,5x0,6x0,8 m
battery charging device for electric fork lift trucks, electric fork lifters
with charging cable
accessory
adapting cable
Condition: on Sale as is!
weight max. 20t + 5t Hilfshubwerk t
clamping width 22.000 mm
Eqdiqat
documentation
lifting capacity 1,6 t
lift HW 6000 mm
span width 16990 mm
- with 2 trolleys as cantilever crab 5 to.
- Length shortened to 23.5 mtr.
Bncmzrtr3
- Corridor operated
- The crane has 4 wheels, as does the cat
- Roller diameter crane: 400 mm
- Roller diameter cat: 200 mm
- Wheel load at least 30.6 kN max. 77.9 kN
Manual trolley, push trolley, crane trolley, trolley drive, crane drive, crane drive, trolley
-Beam width: max. 330 mm
-Payload: 2000 kg
-Number: 1x drives available
-Price: per piece
-Dimensions: 440/300/H260 mm
E73drk8ec
-Own weight: 20 kg
The gantry crane AMENABAR E34110M 1000 kg was produced in 2018 in Spain. A gantry winch is a device designed for lifting and towing loads.
Technical data of the gantry hoist:
- crane type: B3 with one 1 / 2V support, frame with a fixed height
- lifting capacity: 1000 kg
- height to the lower shelf of the track: 6000 mm
- lifting height: height to the lower shelf - dead zone of the hoist
- total height: approx. 6250 mm
- internal width: 4000 mm
- total width at the height of the beam: approx. 49...
2
Pillar-mounted slewing crane
Ytalwc
Manufacturer: Mannesmann Dematic AG
Year of construction: 1998
headroom: 4045 mm
outreach 3000 mm
lifting capacity: 500 kg
three-phase current 50 Hz
load capacity 1,500 kg
passage between stands 2,500 mm
hook-on height chain hoist 1,680 to 3,000 mm
construction height 2,050 to 3,370 mm
mobile and stationary side part
Bnjdjklvyh
width of side part 1,710 mm
*- good condition -rarely used -*
table length 3000 mm
table width 1500 mm
table height (lateral area) 100 mm
weight 726 kg
Btioefya
lifting capacity 3,2 t
lift HW 9000 mm
span width 16990 mm
- with 2 trolleys as cantilever crab 5 to.
- Length shortened to 23.5 mtr.
- Corridor operated
- The crane has 4 wheels, as does the cat
- Roller diameter crane: 400 mm
Bo3irz9mn9
- Roller diameter cat: 200 mm
- Wheel load at least 30.6 kN max. 77.9 kN
Friction wheel, impeller, bridge crane, indoor crane, assembly crane, workstation crane
Mnxwt
-Friction wheel drive for: Demag crane
-with: pantograph
-with: control switch
-Dimensions: 660/330/H340 mm
-Weight: 41 kg
arm length 5000 mm
weight max. in kg 2500 kg
4500 mm
total power requirement kW
weight of the machine ca. t
dimensions of the machine ca. m
Dxf7qu
4
Column-mounted slewing crane
Manufacturer: Vetter
Type: AS2,5 - 5,0,
Bpvnhavqz9
year of construction: 2000
headroom: 2750 mm
outreach 5000 mm
load capacity: 250 kg
three-phase current 50 Hz
load capacity 600 to 3,000 kg
Gvv0yo
fork arms 1,000 mm - adjustable
range of fork positioning 450 to 900 mm
fork profile 120 x 50 mm
height adjustment - usable height 1,300 to 2,000 mm
automatic weight compensation
total height 1,710 to 2,410 mm
weight approx. 260 kg