Channel baling presses
ALBAMAT 900 V5 Z1

Name: ALBAMAT 900 V5 Z1
Brand: ALBAMAT
Availability: InStock

Condition

Used

Location

Wuppertal

Channel baling presses ALBAMAT 900 V5 Z1

Basic data

Machine type:: Channel baling presses

Manufacturer:: ALBAMAT

Model:: 900 V5 Z1

Condition:: excellent (used)

Price & Location

Location:: Herderstr. 1, 42327 Wuppertal, Deutschland

Call

Details about the offer

Listing ID:: A22259647

Update:: 03.07.2026

Description

ABBA ALBAMAT 900 V5-Z1 – Fully automatic channel baler – 90 t pressing force

Manufacturer: ABBA Pressentechnik
Type: ALBAMAT 900 V5-Z1

The machine is in very good, fully functional condition and is available immediately. An inspection and test run can be arranged.

The ABBA ALBAMAT 900 V5-Z1 is a powerful, fully automatic channel baler for high throughput and is ideally suited for compressing a wide variety of recyclable materials.

Suitable for:

* Cardboard
Fpjdpfx Apozil S Us Don
* Waste paper
* Corrugated cardboard
* Printing waste
* Plastics (PET, HDPE, etc.)
* Films
* Aluminum and tinplate cans
* Wood shavings
* Glass wool
* Shrubbery cuttings

Equipment

* 90 t pressing force
* 1 main press cylinder
* Large feed opening
* 5-point fully automatic vertical wire tying
* Hydraulically automatic 3-sided channel adjustment
* Hardox press bed
* Hardox piston guide with wear-resistant guide strips
* High-performance cooler
* Control cabinet and tank heating
* 10 different press programs
* 5.7” touchscreen operation
* Floor and piston slides to protect the tying unit

Technical data

* Pressing force: 90 t (900 kN)
* Feed opening: 1,140 × 1,700 mm
* Bale dimensions: approx. 1,080 × 1,100 × up to 1,200 mm
* Bale weight paper/cardboard: approx. 500–750 kg (material dependent)
* Drive power: 90 kW
* Throughput cardboard (35 kg/m³): up to approx. 10 t/h
* Flow rate at idle: 698 m³/h
* Flow rate under operating conditions: 543 m³/h
* Cycle time: 16 seconds
* Specific pressing force: 76 N/cm²
* Machine weight: approx. 24,000 kg

Available for immediate delivery. Transport and loading can also be arranged upon request.

The listing was translated automatically. Translation errors are possible.

Documents

22259647-01.pdf

Seller

Registered since: 2014

44 listings online

Call

Send inquiry

Telephone & Fax

+49 202 7... show

+49 2104 ... show

Fax:

These listings may also fit your interest.

Listing

Bollegraaf HBC80K (45kW) Bollegraaf HBC80 (45kW)

Siddeburen

7,012 km

Bollegraaf HBC80K (45kW)
BollegraafHBC80 (45kW)

Call

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. Fjdpfx Apotvat Te Dspn At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. After refurbishment, this baler is sold with a 2-year warranty.

See details

Listing

Automatic Horizontal Press IMABE IBERICA 125 TN

Piera

7,475 km

Automatic Horizontal Press
IMABE IBERICA125 TN

Call

Condition: excellent (used), Continuous horizontal press, to compact and pack materials such as cardboard, paper, plastics and others. IMABE IBERICA brand, pressure 125TN, loading mouth 1800 * 1000mm, with blades on the top of the compaction carriage that allows cutting the excess material above the compaction tunnel. Folding compaction tunnel, both at the top and on the sides, for greater retention of the material, outlet for bullets of dimensions 1050 * 1100mm and adjustable length. Fjdpsv U R Agefx Ap Dopn Automatic tying system, lateral, by 5 wires, for high production 30-35ton / hour. Fully rebuilt and revised in 2019

See details

Listing

Secondary shredder LINDNER KOMET 2200 HP

Grafenwöhr

6,643 km

Secondary shredder
LINDNERKOMET 2200 HP

Call

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Fpsdpfx Aoyu Undjp Den Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

See details

Listing

Single shaft shredder LINDNER MICROMAT MS 2000

Grafenwöhr

6,643 km

Single shaft shredder
LINDNERMICROMAT MS 2000

Call

Condition: used, Year of construction: 1996, overall weight: 10,000 kg, rotor length: 2,000 mm, power: 75 kW (101.97 HP), rotational speed (max.): 80 rpm, Lindner Micromat MS 2000 Drive motor: 75 kW, 400 V/50 Hz Control cabinet: complete star/delta Rotor speed: at 50 Hz approx. 80 rpm Rotor knives: 104 pcs. new Rotor knife shape: 43x43x19.5 mm Filling opening: LxW 2030 x 1650 mm Rotor length: 2030 mm Rotor flight circle: 560 mm Scraper comb: yes Counter knife: yes Hydraulic unit: complete Hydraulic cylinder sieve cassette: screens 50x50 mm Fpodpfewtbyxex Ap Den Total weight approx. 9.5 t Dimensions LxWxH mm: approx. 4520 x 2970 x 2660 mm Inspection and test run possible by appointment. Incl. hopper Delivery time: immediately

See details

Listing

Single shaft shredder LINDNER komet 1750

Rydułtowy

6,188 km

Single shaft shredder
LINDNERkomet 1750

Call

Listing

Mülsen

6,608 km

Press container
PrestoHGS20R

Call

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R Container for roll-off tipper trucks 20 m³ usable volume Fedjzt Nirspfx Ap Depn technically refurbished repainted in desired RAL color hook lift system on both sides discharge door hinged at the top

See details

Listing

Germany

6,760 km

Extrusion Plant
Artec145DV

Call

Year of construction: 2013, condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. Fodsv Ip S Hspfx Ap Depn

See details

Listing

Leiria

8,383 km

Extrusion line
EREMAD120

Call

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, New conveyor belt equipped with a metal detector. 110 kW motor with frequency inverter, new. Vacuum system with two zones. Erema double-piston screen changer. Fpedpfxowqrrte Ap Don Die-face cutting system; water cooling; centrifuge; conveying fan. One barrel and two used spare screws

See details

Listing

Ovidiu

5,312 km

Recycling pelletizing extrusion line

€1,10,998

Fixed price plus VAT

Call

Year of construction: 2014, condition: excellent (used), functionality: fully functional, RECYCLING PELLETIZING EXTRUSION LINE – BEIER 2014 / EKOCHEM – 2023 – with autostart heating - Belt conveyor with amperes load control - Agglomerator – 75 kw with cooling blower and auto water spray system - Main engine extruder – 110 kw - Double degassing MELT LASER FILTER SYSTEM – HOP 400 – Ekochem – 2023 - with autostart heating - with cooling pump - laser filter spare parts: 1 set 200 microns, 1 set 250 microns, 2 sets 300 microns, 2 blades Fjdpfx Apeuac Uge Depn PELLETIZER – RW-440 – Ekochem – 2023 - with new Ekochem die head water pump - with PE and PP die head - with air compressor and custom die head blades – 48 h/set change - Centrifuges - Vibrator - Heated Silo + weight system - Capacity: PP( 400 – 500 kg/h) / PE( 500 – 600 kg/h )

See details

Listing