Carton Sealer

AMTEC CLS 40

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Ledpfx Ajfi Tg Hei Horr Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: new, functionality: fully functional, input voltage: 230 V, Cobot palletising solution - Relieves employees from heavy lifting and monotonous physical strain - System can be configured and adapted to individual requirements - Requires less floor space than conventional palletising solutions (dimensions: 2,650 x 1,600 mm) Lredpsrbz Rxofx Ai Hsr - No stationary safety technology required, making UNIPAL easy and flexible to use - Dashboard for process overview - Up to 22 kg payload and 2,200 mm palletising height - Fast and easy retooling - Plug-and-play (requires 230 V mains supply) and 6 bar compressed air

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Ledow S Tyajpfx Ai Hjrr

Condition: new, Year of construction: 2025, Horizontal Cartoner 60-ECO – Compact and Efficient Limited space is a common challenge in production environments. Our BASIS 60-ECO horizontal cartoner offers a compact and reliable solution. The machine was presented as an exhibition machine at a trade fair and is now available for sale. The total length including conveyor is only about 4 meters, making it ideal for facilities with limited space. The machine can process up to 60 cartons per minute. - Flexible product infeed adaptable to different products - Optional automatic product timing system Lredpfx Aemftm Nei Hsr - Carton size up to 220 mm (L) × 120 mm (W) × 400 mm (H) - Siemens PLC control and Siemens servo drives - Nordson hot-melt gluing system Customers are welcome to visit our facility in Germany to test the machine with their own products and set up the system according to their needs. The price is negotiable. We also offer a wide range of horizontal and vertical cartoners as well as flow-wrapping machines.

Year of construction: 2004, condition: ready for operation (used), Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021. Lodpfx Ajhix Ukji Hsrr

Year of construction: 2023, condition: new, Due to overproduction, 9 units are available. Dimensions: approx. 3000 x 300 x 105 mm Aluminum construction: Conveyor belt width without wave edge Smooth PVC conveyor belt Green conveyor belt, 2-layer, particularly resistant to transverse forces, endlessly welded with a stepped joint * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.3 m/sec. * speed controllable with a frequency inverter Connection 220/400V, 50Hz, protection class IP54 Lsdsff Hgajpfx Ai Herr Drive and motor control optionally available.

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% Lrsdsr Iyvbopfx Ai Hsr - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % - triple brick offset 25 %

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Lsdpfet Amc Iex Ai Hsrr

Condition: good (used), Year of construction: 2008, Professional packaging machine from a renowned European manufacturer: -Suitable for adhesive tape width up to 50 mm. -Maximum carton dimensions according to manufacturer's specifications approx.: width 500 mm x height 500 mm; unlimited length. Ljdstndq Ispfx Ai Herr Double-sided sealing of the packages at the top and bottom. -Different carton formats are adjusted in height and width using cranks. -Transport speed approx. 20 m / min. Output approx. 800 cartons per hour. -Working height of the machine is infinitely adjustable. The machine can be moved and locked using foot rollers. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams.

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) N. 4 Vertical supporting columns of the top supporting beam N. 1 Horizontal top supporting beam (where the carriage slide on) N. 1 Motorized sliding carriage with horizontal metal arms Lsdpjd Rg Dpofx Ai Herr N. 2 Horizontal metal arms with vacuum cups, adjustables N. 2 Out-side rollers ways (on gound) to in-feed pile of panels to the Loader N. 1 Out-side motorized rollers table (which in-feed the panels to the Unloader), with also cross motorized conveyor belts (at 90°), dimensions mm 7232 (ca.) Separate electric and command panel Electronic Programmer OMRON Perimetral safety metal grids Working capacity (cycles/min) 16 - 20 (ca.) Min/Max panels thickness mm 10 - 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1200 x 3200 (ca.) Total installed motor power Kw 23.3