Used cardboard packaging for sale (116)

Condition: used, Year of construction: 2020, Becker BZ-2 Atomic – Packaging System - 2 identical, mirror-inverted packaging lines available - Without cutting machine - Year of manufacture: 2020 In this system, the cardboard is first trimmed at the front to remove any potential transportation damage. After edge trimming, a side trim of at least 30 mm is performed on both sides. If necessary, corners are also cut from the cardboard, depending on the FEFCO type. Finally, the cardboard is creased along the fold lines and conveyed out of the machine. Waste generated during the process is transported out of the machine via a waste conveyor belt located underneath. At the machine’s discharge end, a conveyor belt removes the waste into a container. If the edge trim is too long, it must be cut inside the system to ensure trouble-free removal from the machine. The cut blanks and products are conveyed to the folding table where cartons are erected and filled. In the Box Closing Unit, the cartons are closed, labeled, and discharged from the system. Machine components (see diagram): (1) Buffer Table | (2) Conveyor Pack System | (3) Folding Table FT30 | (4) Box Closing Unit | (5) Label Applicator | (6) Belt Conveyor | (7) Buffer Table | (8) Conveyor Pack System | (9) Folding Table FT30 | (10) Box Closing Unit | (11) Label Applicator | (12) Belt Conveyor Technical Data: - Sound pressure level: < 70 dB(A) - Operating voltage: 400 V / 50 Hz - Rated current: 47 A - Main fuse: 63 A - Connected load: 32.5 kW Dkjdpoygipmjfx Afpsh - Control voltage: 24 V - Compressed air supply: 6 bar - Air consumption: 10 l/min - Machine dimensions (W x H x D): 21,260 x 4,000 x 18,030 mm

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Semi-automatic carton former Dkjdsf Evh Tjpfx Afpoh - Starbox 65 - Connecting Robotape-Starbox 65 - Set of 4 swivel castors with brake Sample photos - machine is still in original packaging

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Semi-automatic carton former - Starbox 50 - Connecting Robotape-Starbox 50 - Set of 4 swivel castors with brake Sample photos - machine is still in original packaging Dodpfxef Evhls Afpokh

Condition: good (used), Endoline 221 case erecting machine, can handle cases between 200-500mm length, 150-400mm width and 175-600mm height at up to 16 cases per minute as standard. Dsdpou S R Avofx Afpjkh

Condition: used, Year of construction: 2009, Case packer from 1993 refurbished by the manufacturer in 2009. Automatic packing of boxes with cardboard group by rows and by stacking in a cardboard box with closure. Max. production: 20 to 30 cycles / minute Nordson Problue4 glue generator Label removal Delna DS 14 History, documentation and electrical diagrams available. Spare parts available. Product length 50 - 130 mm Product width 47 - 200 mm Product height 15 - 40 mm Carton length 70-250 mm Carton width 70-250 mm Carton height 40-120 mm Dkjdpfjygnaqox Afpoh

Condition: excellent (used), Year of construction: 2023, Ref: 11068 . 2023 Kolbus BLW 200 + BLT 200 ‘Boxline’ Wrapper & Taper Line The Boxline Wrapper is a fully automatic laminating machine for producing packaging, lids, and boxes by forming plates The Boxline Taper is a sealing tape machine for automated fold-up and taping of punched or grooved box blanks up to 40 products/min Features - BLW 200: Non-stop, four-sided laminating panel blanks without forming tools at up to 40 cycles per minute, even with deep and short wraps Box size and model changeover without changing the forming tools Clear and simple computerised operation including integrated robot Non-stop wrapping of all four box sides; processing for each side can be optimized separately Continuous transport, alternate sides wrapped sequentially, tolerance compensation Precise automated edge turning for deep and shallow turn-ins Fast, cost-effective format changes simply by swapping the forming plates Higher quality – lower resource consumption Features - BLT 200: Coupled inline with BLW 200 Wrapper Fold-up station 4 hot sealing tape applicators Delivery via conveyor belt Automated format set-up Specifications: BLW 200 Min. Max. Box length: 56mm 570mm Box width: 56mm 360mm Box height: 15mm 170mm Board thickness: 1mm 3mm Cloth length: 120mm 815 mm Cloth width: 120mm 605mm Wrap dimension: 15mm 85mm Djdpfx Afsyg E Irjpjkh Side wrap dimension: 15mm 85mm Mechanical speed: 40 cycles/min Box height > 135mm: 25 cycles/min max BLT 200 Min. Max. Cardboard blanks: 86x86mm 735x525mm (width x height) Size range box: 56x56x15mm 360x570x170mm (width x length x height) Thickness cardboard: 1mm 3mm Mechanical speed: 40 cycles/min Box height > 135mm: 25 cycles/min max

Condition: ready for operation (used), Year of construction: 1999, Carton erecting machine Carton sealer Dkjdpeyhzkcefx Afpeh

Condition: good (used), Year of construction: 2018, MG Tech Leanbox Case former Dkodjwxlm Hopfx Afpeh Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Condition: like new (used), Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, total height: 1,600 mm, total width: 1,600 mm, total length: 15,000 mm, overall weight: 6,440 kg, The equipment has been used very little, is almost like new, and has under 1,000 operating hours. Three-corner packaging gluing machine with automatic box base forming and gluing device with cold adhesive. - Maximum format: opening 98 cm Dkedpfxjwqcrqs Afpeh - Line speed: 0-300 m/min, continuously adjustable - Cardboard thickness: 280-700 gr/ sqm. - Box type: crash-lock base box, straight line box, double wall box. - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. Other specifications: - Equipped with sensors. - Operation via touchscreen displaying all important information about the machine status. - The belts are adjusted centrally by means of knobs. - The straps can be swung out of the way for easy access in the event of an intervention to unlock the boxes. - Separate, adjustable straps and stacking and removal. - Distance between products is adjustable by coupling. - Remote control panel with cable for easy format adjustment. - Special turning plate to make it possible to glue other types of boxes such as CDs. - Box type: crash-lock base box, straight box, double-walled box - Folding method: 1st fold at 180°, 3rd fold at 135°, 2nd & 4th folds at 180°, turntable for other models. - Feeding system: Automatic vibratory feed, - Grinding unit - Correction section - Pre-finishing section; - Motorization for format change - Electrical power: 11,5 kW - External dimensions: 15000 x 1600 x 1600 mm - Weight: 6440 kg

Condition: good (used), Die-cutting machine for cardboard, useful width 2500 mm. Can feed three different sizes of cardboard into the machine. Dkedpfx Aoyf D N Sofpoh

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1A, The VOGEL MH-FJ-1A carton sealing machine has a side drive belt system and an additional drive belt in the upper section of the machine. The advantage lies in the stability - high cartons cannot tip to the side. Carton formats: Length 150 - ∞ mm Width: 120 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Dedpoyaaqzjfx Afpskh Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1AW, The VOGEL MH-FJ-1AW carton sealing machine has a side drive belt system. Including leading and trailing table. Dedoyaaqujpfx Afpokh Carton formats: Length 150 - ∞ mm Width: 100 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Width 890 mm Weight 180 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Dodpfx Afjyaaqbspjkh Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1AWS, The VOGEL MH-FJ-1AWS carton sealing machine has a side drive belt system. The machine is specially designed for cartons in smaller formats. Carton formats: Length 160 - ∞ mm Dkodpjyaap Dofx Afpeh Width: 90 - 320 mm Height: 60 - 280 mm Technical data: Length 1,090 mm Width 890 mm Weight 85 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: YS501X, Die Kartonverschließmaschine vom Typ VOGEL YS501X ECONOMIC ist unsere Empfehlung speziell für eher große Kartonformate, welche in Serien verklebt werden Karton-Formate: Länge 150 – ∞ mm Breite 150 – 500 mm Höhe: 140 – 560 mm Technische Daten: Betriebsspannung 220 V CE-Kennzeichnung Dkodpsyaan Tefx Afpoh Zubehör: Zu unserem VOGEL-Karton-Verschließer-Programm bieten wir Laufrollen, Vor- und Nachlauftische, Rollenbahnen an. Unser Kartonverschliesser YS501X ECONOMIC ist eine günstige Lösung, wenn es darum geht Kartons in eher großen Formaten sicher zu verschließen. Durch zwei seitliche Förderbänder werden Ihre Kartons sicher durch den Kartonverschliesser befördert. Die Einstellung der Kartonbreite erfolgt mechanisch über eine Kurbel. Die Höheneinstellung ist bei dieser Maschine besonders leicht und schnell zu lösen, denn das obere Klebeaggregat muss nur entriegelt werden und kann dann einfach auf die jeweilige Höhe gebracht werden. Auf Grund der mechanischen Einstellung der Formate ist diese Maschine für Serienproduktionen gedacht, bei welcher eine längere Zeit hintereinander Kartons im gleichen Format verschlossen werden sollen. Die Deckelklappen der Kartons werden vor dem Zuführen in die Maschine manuell niedergedrückt. Ausgelegt ist diese Maschine für Klebebänder mit 76mm Kerndurchmesser und 50 mm Breite. Wir empfehlen dazu den Einsatz von Maschinenklebeband mit mehr Metern je Rolle ( als bei Handrollen), so können Sie länger arbeiten ohne das Klebeband wechseln zu müssen! Es können gleichermaßen PP & PVC Klebebänder, wie auch umweltfreundliche Papierklebebänder genutzt werden. Die Klebeaggregate können leicht heraus genommen werden, um die Kleberollen zu wechseln. Ebenso kann dies aber auch genutzt werden, wenn Sie Kartons vielleicht nur oben zukleben wollen ( Stichwort: Automatikbodenkartons). Selbstverständlich trägt auch diese Maschine das CE Zeichen.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-2_, It features a side drive-belt system. The machine automatically adjusts to the respective carton size within the specified range. Carton formats: Length: 150 – ∞ mm Width: 140 – 480 mm Height: 120 – 480 mm Technical Data: Length: 1,150 mm Dkjdpfxsyaam No Afpoh Width: 1,005 mm Weight: 250 kg Operating voltage: 220 V Air: 5 kg/cm² CE marking IMPORTANT: An air supply is required to operate the machine and is not included in the scope of delivery. Our MH-FJ-2 carton sealer is specifically designed for changing carton sizes. Thanks to pneumatic adjustment of height and width, constantly changing carton formats can be processed quickly and easily without manual intervention. The machine adapts to the different sizes instantly. Two lateral and two upper conveyor belts securely transport your cartons through the sealer. The carton flaps must be folded down manually before feeding the cartons into the machine. This model is designed for adhesive tape with a 76 mm core diameter and a width of 50 mm. We recommend using machine adhesive tape with a higher meterage per roll (compared to hand rolls), so you can work longer without needing to change the tape! Both PP and PVC tapes as well as environmentally-friendly paper tapes are suitable for use. The tape heads can be removed easily for changing the rolls. This also provides flexibility if, for example, you only want to seal the top of the cartons (keyword: automatic-bottom cartons). Of course, this machine also bears the CE mark. An on-site air connection is required to operate this machine! Accessories: Our VOGEL carton sealer range offers castors, infeed and outfeed tables, and roller conveyors as accessories.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1AWS, It features a side drive belt system. The machine is specifically designed for smaller-format cartons. Dkedpfx Aoyaamvsfpjh Carton formats: Length 160 – ∞ mm Width 90 – 320 mm Height: 60 – 280 mm Technical specifications: Length 1,090 mm Width 890 mm Weight 85 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer range, we offer castors, infeed and outfeed tables, and roller conveyors.

Condition: new, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Dkodpfx Aoyaakzjfpeh Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-3A, The VOGEL MH-FJ-3A carton sealing machine is equipped with a lid sealing mechanism, i.e. the cartons can be fed in an open state. The short and long lid parts of the carton are closed first, only then is the carton glued. Carton formats: Length 150 - 600 mm Width: 115 - 490 mm Height: 110 - 510 mm Technical data: Length 1,800 mm Width 880 mm Weight 300 kg Operating voltage 220 V Air 5 kg/cm2 CE marking IMPORTANT: An air pressure supply is required to operate the machine, which is not included in the scope of delivery. Accessories: Dksdsyaaknjpfx Afpjh For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1A, It features a side drive belt system as well as an additional drive belt at the top of the machine. The advantage lies in stability – this prevents tall cartons from tipping over sideways. Carton formats: Length 150 – ∞ mm Width 120 – 480 mm Height: 120 – 480 mm Dkedpeyaahmofx Afpjh Technical specifications: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer range, we offer castors, infeed and outfeed tables, as well as roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: YS501X-1, Die Kartonverschließmaschine vom Typ VOGEL YS501X ECONOMIC ist unsere Empfehlung speziell für eher große Kartonformate, welche in Serien verklebt werden Karton-Formate: Länge 150 – ∞ mm Breite 150 – 500 mm Höhe: 140 – 560 mm Technische Daten: Betriebsspannung 220 V CE-Kennzeichnung Zubehör: Zu unserem VOGEL-Karton-Verschließer-Programm bieten wir Laufrollen, Vor- und Nachlauftische, Rollenbahnen an. Unser Kartonverschliesser YS501X ECONOMIC ist eine günstige Lösung, wenn es darum geht Kartons in eher großen Formaten sicher zu verschließen. Durch zwei seitliche Förderbänder werden Ihre Kartons sicher durch den Kartonverschliesser befördert. Die Einstellung der Kartonbreite erfolgt mechanisch über eine Kurbel. Die Höheneinstellung ist bei dieser Maschine besonders leicht und schnell zu lösen, denn das obere Klebeaggregat muss nur entriegelt werden und kann dann einfach auf die jeweilige Höhe gebracht werden. Auf Grund der mechanischen Einstellung der Formate ist diese Maschine für Serienproduktionen gedacht, bei welcher eine längere Zeit hintereinander Kartons im gleichen Format verschlossen werden sollen. Die Deckelklappen der Kartons werden vor dem Zuführen in die Maschine manuell niedergedrückt. Ausgelegt ist diese Maschine für Klebebänder mit 76mm Kerndurchmesser und 50 mm Breite. Wir empfehlen dazu den Einsatz von Maschinenklebeband mit mehr Metern je Rolle ( als bei Handrollen), so können Sie länger arbeiten ohne das Klebeband wechseln zu müssen! Es können gleichermaßen PP & PVC Klebebänder, wie auch umweltfreundliche Papierklebebänder genutzt werden. Die Dsdpfx Afsyaad Uopskh Klebeaggregate können leicht heraus genommen werden, um die Kleberollen zu wechseln. Ebenso kann dies aber auch genutzt werden, wenn Sie Kartons vielleicht nur oben zukleben wollen ( Stichwort: Automatikbodenkartons). Selbstverständlich trägt auch diese Maschine das CE Zeichen.

Condition: new, Year of construction: 2025, machine/vehicle number: CF 10 T / 1, Our CF 10T bottom flap folder with filling station is an inexpensive entry-level model. Cardboard boxes with a length of 200 to 600 mm and a width of 150 to 480 mm are fixed for filling and pneumatically transferred to the next station. This simple model comes with a magazine and runs on normal household electricity. The CF 10T requires compressed air for operation. Technical data: Dimensions 1400 x 950 x 700-860 mm Weight 90 kg Operating voltage 230 V / 600 W Compressed air 6 kgf/m3 Working height 700 - 800 mm Noise emission < 75 dB(A) Dodpjx U U Tnofx Afpekh Cardboard formats: Length 200 to 600 mm Width 150 to 480 mm Height 120 to 500 mm Roller conveyor is not included in the price, but can be purchased as an option. Can also be combined with one of our carton sealers on request.

Condition: like new (used), TETRA PAK CARDBOARD PACKER CBP 32 VERSION 400 YOM 2010 2177 RUNNING HOURS ONLY!! MULTI PACKER FOR 200/250/1000 ml AS NEW CONDITION Dkodjya I Sgepfx Afpoh LOCATION - POLAND READY FOR SHIPPING

Year of construction: 1990, condition: like new (used), Make: Imball Type: Linear Hot melt Cardboard Multipacker Dkodpfx Aefx R Rtsfpsh Model: Multipack 200R P340 Dx Serial Number: 909080040 Year: 2001 Capacity: up to 180 multipacks per minute Tooling: Can diameter 73 mm in packed in 3 pack(several package possible 1 pack-2pack-3pack) Range: Can diameter 55-100mm Can Height 35-180mm Frame: Aluminum / Steel coated Dimensions: L x W x W = 6500 x 1300 x 2600 mm. Weight: 2500Kg Power: 380V 3P+N+E, 50Hz, 10Kw Air Pressure > 6 bar, Features: Siemens SPS and touch panel

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Factory closure mask production. Installed in 2021, out of operation since March 2022. The systems are already dismantled and ready for shipment. Dsdpfx Aexqf U Sjfpekh Optima CMF: Packaging machine Application: For erecting and sealing folding cartons, ideal for complex vertical carton requirements. Products: Suitable for cosmetic products such as lotion, makeup bottles, and cream jars. Features: Uses robotics for precise placement of products and inserts such as spatulas, brochures, or flip-top leaflets. Flexibility: Can also be configured for food and chemical products in other versions of the machine.