Counting machine

AMTEC LEG-COUNT-SHWR

Condition: excellent (used), Year of construction: 2022, operating hours: 2,963 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, travel distance X-axis: 140 mm, travel distance Y-axis: 70 mm, travel distance Z-axis: 235 mm, bar passage: 42 mm, total height: 1,700 mm, total length: 2,220 mm, total width: 1,460 mm, overall weight: 3,100 kg, Miyano BNA-42 DHY3 CNC turning center, manufactured in 2022, in very good and fully functional condition. The machine is immediately ready for operation and has only 2,963 operating hours. HIGHLIGHTS - 2 spindles: main spindle and sub-spindle - 2 turrets - Y-axis on the upper turret - Driven tools - Max. bar diameter, main spindle: 42 mm - Max. bar diameter, sub-spindle: 34 mm - Kraft & Bauer fire protection system - Extraction system - Knoll chip conveyor TECHNICAL DATA Main spindle - Max. bar diameter: 42 mm - Travel: 100 mm - Spindle speed: 6,000 rpm - Spindle motor power: 7.5 / 5.5 kW - C-axis resolution: 0.001° Sub-spindle - Max. bar diameter: 34 mm - Spindle speed: 5,000 rpm - Spindle motor power: 5.5 / 3.7 kW - C-axis resolution: 0.001° Upper turret - 8 stations - X-axis travel: 140 mm - Z-axis travel: 235 mm - Y-axis travel: 70 mm (+/- 35 mm) - Speed of driven tools: 5,000 rpm - Power of driven tools: 1.0 kW Lower turret - 6 stations - X / Z-axis travel: 140 / 310 mm Electrical supply - Total connected load: 30 kVA Dimensions and weight - Footprint: 2,220 x 1,460 mm - Machine height: 1,700 mm - Machine weight: approx. 3,100 kg Chsdpfx Agew Igyrjpsa The machine is located at our facility in Hornberg. Further information and additional images are available upon request.

Year of construction: 2026, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. other pictures: Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Chodpfx Aogi Dl Nogpja Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection.

Condition: used, We are offering a JUTEC 6000D tube bending machine here. Please refer to the attached offer for technical data. If you have any questions, we are happy to assist you. Chjdpfx Agexz Rz Eepoa

Condition: ready for operation (used), Table diameter: 1000mm, tool height: 80mm, sealing pressure: 1.6t, number of stations: 4, connected load: 3kW, including tools, machine was hardly used. Chjdoif Elgepfx Agpea

Condition: used, Year of construction: 2013, Chip conveyor Cedpfeiicnkjx Agpjha Manufacturer: BMF - BÜRENER, with filter system and high-pressure pump. Dimensions of chip conveyor: Inlet width: 600 mm, inlet height: 200 mm, conveying length: 3000 mm.

Condition: ready for operation (used), Year of construction: 2010, Max. workpiece diameter: 25mm, max. workpiece length: 100mm, max. bar diameter: 25mm, max. stroke X/Z: 42mm/50mm, rapid traverse: 40m/min, number of spindles: 6, speed: 12000rpm, control: Siemens 840D Powerline. Cjdpfx Aotqfq Uogpeha

Condition: used, Year of construction: 2021, functionality: fully functional, total height: 2,900 mm, total width: 1,350 mm, total length: 1,710 mm, rotational speed (min.): 1,000 rpm, power: 5.5 kW (7.48 HP), SPYRA chip centrifuge 600H - For removing oil or emulsion from wet chips - Fully operational and ready for use - Warranty available on request! - Tramp material within the chips presents no issue for this machine; it is specially designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 4 t/h - Aluminum: 0.8 t/h - Brass: 2.7 t/h - Grey cast iron: 2.7 t/h The machine can be inspected in 71384 Weinstadt near Stuttgart. Cjdpfx Agow Nqu Ajpsha

Year of construction: 1996, condition: good (used), Mehrspindel Schütte SG18 Chjdpjg S Tx Iofx Agpea

Condition: used, Year of construction: 2020, total height: 2,600 mm, total width: 1,250 mm, total length: 1,610 mm, rotational speed (min.): 1,200 rpm, power: 4 kW (5.44 HP), SPYRA Chip Centrifuge 500H - For de-oiling wet chips containing oil or coolant emulsion - Fully operational and ready for use - Warranty available upon request! - Contaminants and tramp parts within the chips are not an issue for this machine, as it has been specifically designed and patented for this purpose. Throughput capacity for broken chips: - Steel: 2 t/hr - Aluminum: 0.5 t/hr - Brass: 2.2 t/hr Chedpfx Aow Nq Amegpsa - Grey cast iron: 2.2 t/hr The machine can be inspected in 71384 Weinstadt near Stuttgart.

Condition: used, Year of construction: 2017, operating hours: 21,752 h, functionality: fully functional, turning length: 100 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 50 rpm, turning diameter: 42 mm, overall weight: 3,000 kg, Max. work length: 100 mm Max. machining diameter of bar work SP1: 42 mm Max. machining diameter of bar work SP2: 34 mm Turret slide stroke X1 axis: 140 mm Z1 axis: 235 mm Z2 axis: 310 mm Number of spindles: 2 Spindle speed range SP1: 60-6,000 rpm Spindle speed range SP2: 50-5,000 rpm Tool spindle speed range: 50-5,000 rpm Number of driven tools: max. 8 Spindle drive SP1: 11/7.5 kW Spindle drive SP2: 5.5/3.7 kW Power supply capacity: 28 kVA Chjdpfjx Ig Ikex Agpoa Fuse: 81A Bar feeder: SN542-3.2 m Quick tech Year of manufacture: 2017 Serial no.: 1438