Centrifuge, chip centrifuge

SPYRA Zentrifuge 600H

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 4,60,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Tedpfx Aijq Nmw Ijred

Condition: used, Year of manufacture 2003 2.2 kW 3.0 HP Tedpfxew Upn Es Aired including documentation, COC

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Tjdpfeua Tbwox Aired Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 9 - Number of turrets : 2 MAIN SPINDLE - Spindle power : 6.7 / 10.7 [kW] - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - Z stroke : 305 [mm] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Spindle power : 3.7 / 5.5 [kW] - Spindle speeds : 6400 [rpm] - Max. bar diameter : 30 [mm] - C axis indexing precision : 0.001 [°] - X stroke : 140 [mm] - Z stroke : 300 [mm] TURRET 1 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] - Live tools power : 3.4 [kW] - X/Z stroke : 140/300 [mm] - Y stroke : -40/+25 [mm] TURRET 2 - Number of positions : 10 - Number of motorized positions : 10 - Live tools speed : 12 000 [rpm] Tjdpfx Aieypxqrorsd - Live tools power : 3.4 [kW] - X/Z stroke : 140/320 [mm] - Y stroke : -25/+40 [mm] POWER SUPPLY - Total installed power : 28 [kW] WEIGHT & DIMENSIONS - Machine floor space : 3870 x 1670 [mm] - Machine height : 2500 [mm] - Machine weight : 6000 [kg] MACHINE HOURS - Number of hours under power : 23240 [h] - Number of working hours : 19500 [h] EQUIPMENT - CNC : Traub TX 8i-p - 3 colors status lamp - Coolant tank : 500 [l] * with high-pressure pump : 3,8,20 [bars] * with paper filtering unit - Chips conveyor - Parts catcher - Parts conveying strip - Predisposition for barfeeder

Condition: like new (used), Eillert Belt slicer Model: G4400 VS Stainless frame, ideal for cutting fruit and vegetables, variable speed for cutting thickness, belt width 250mm, three winged knife and a series of blades for cutting leafy vegetables, overall length 2700mm, 550Kgs Todpfefx Ni Hox Airod

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, torque: 90 Nm, controller manufacturer: Siemens, controller model: 840D PL, overall weight: 10,000 kg, spindle speed (max.): 12,000 rpm, coolant supply: 25 bar, number of spindles: 1, number of slots in tool magazine: 20, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We are Chiron experts. The machine is currently being partially overhauled and is in very good condition. If a probe or another option is needed, we can gladly provide it for an additional charge. FZ15W with 4th and 5th axis Machine dimensions: approx. 4200mm x 2400mm Travel range -X = 730mm -Y = 400mm -Z = 425mm Control: 840D Powerline Main spindle: -Speed: 12,000 rpm -Tool holder: SK40 -Torque: max. 90NM Tedpfxewpcfue Aired Tool changer -Tool places: 20 Workpiece changer -Peiseler table with Afrocontroller Chip conveyor Coolant system with internal and external cooling Hydraulic clamping device Complete documentation available Geometry tip-top HS runout 0.008mm QC20 measurement 12.6µm (Manufacturer's tolerance 18µm, new machine 23µm, used machine) The machine can be inspected under power.

Condition: excellent (used), functionality: fully functional, Gas boiling kettle Brand Spako Capacity 1100l Tedpfsv Urudox Aired Voltage 230V 50Hz Basket included

Year of construction: 2026, condition: new, Picture 1: Offered Set of two load moving skates with 6tonnes capacity each. You can move 12tonnes in total. The skate system is equipped with high quaity polyurethane wheels. other pictures: Load moving skates in different sizes from 60-220mm height and capacities between 5 and 220 tonnes. Available as 3-Point, 4-Point, Containerskates, 360° Rotational skates with Polyurethane wheels (for all floors) or Nylon wheels (for flat and smooth floors). Please send us an inquiry with information about the weight and project you have to move. We will then send you a detailed offer. Short delievery times, typicalles in stock. Pictures show a selection. Todpfxjgi Dl Ns Airjd

Condition: used, Year of construction: 2018, operating hours: 23,532 h, functionality: fully functional, turning length: 550 mm, spindle motor power: 31,500 W, spindle speed (max.): 6,000 rpm, spindle bore: 65 mm, travel distance X-axis: 110 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 320 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 50 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, torque: 170 Nm, bar passage: 65 mm, total height: 2,490 mm, total length: 6,910 mm, chuck outer diameter: 160 mm, total width: 2,092 mm, bar diameter (max.): 65 mm, spindle nose: 140, overall weight: 9,000 kg, feed force X-axis: 5,000 N, feed force Y-axis: 5,000 N, feed force Z-axis: 5,000 N, Equipment: documentation/manual, rotational speed infinitely variable, For sale is an INDEX C200 CNC lathe, manufactured in 2018, from our own machine inventory. The machine is fully functional and can be inspected and demonstrated in operation at our location. The C200 features extensive equipment, including a main and counter spindle, three tool carriers, and driven tools, making it particularly suitable for the economical series production of complex precision turned parts. Technical data / Equipment: - Manufacturer: INDEX - Model: C200 - Year of manufacture: 2018 - Control system: INDEX C200-si based on Siemens Sinumerik 840D SolutionLine - Main spindle D65 - Counter spindle D65 - Workpiece diameter: max. 65 mm - Main spindle speed: max. 6,000 rpm - Counter spindle speed: max. 6,000 rpm - 3 tool carriers - 14 stations per tool carrier - Driven tools - Y-axis on tool carriers 1 and 2 - C-axis on main and counter spindle Todpsz Hmxnefx Airsd - Coolant high-pressure supply - Chip conveyor - Part removal / gantry removal system - Interface for bar loader magazine UNIMAG4 - iXpanel operating interface - Connection: 400 V / 50 Hz - Rated power: 54 kW - Connected power: 65 kVA - Rated current: 94 A - Max. fuse rating: 100 A The equipment with three tool carriers, a main and counter spindle, and the existing automation and peripheral technology enables flexible and productive complete machining of series parts. The technical configuration is documented in the original INDEX order confirmation. 20260930101605 Current operating hours according to the machine control system: - Total operating time: approx. 23,532 h - Hydraulic system: approx. 22,288 h - Spindle/drive operating times according to the operating hour counter: - S1: approx. 2,298 h - S2: approx. 4,189 h - S3: approx. 1,954 h - S4: approx. 5,998 h - S5: approx. 8,006 h The machine is currently located at our facility and can be inspected and demonstrated in operation after prior arrangement. We would be happy to provide further detailed images, technical documentation, and an official offer with a detailed list of equipment upon request.

Condition: used, Year of construction: 1990, grinding diameter 200 mm grinding length 340 mm centre height 100 mm Control CNC 25 kVA voltage 110 / 220 / 3x165 / 3x380 VAC control voltage 24 VDC Tedpeywnt Hefx Aired