Laser

ATL Lasertechnik ATLEX 300 I

Condition: used, Year of construction: 2006, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,400 mm, spindle diameter: 100 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 2,500 rpm, The machine is in good technical condition, currently disconnected. Heidenhain TNC 530i control system, chip conveyor, tool magazine 40 pcs. Tedov Upbnopfx Ac Nsf

Condition: used, Year of construction: 1980, machine/vehicle number: 19780, grinding length:600 mm grinding width:300 mm workpiece height:375 mm number of spindle speeds:1000 - 3000 UpM grinding wheel dimensions::300 x 50 x 76,2 mm Todpfxocxxrze Ac Nof grinding spindle drive:2,8 - 8,4 kW weight of the machine ca.:3,5 t CNC-controlled, 3D-controlled profile-dressing unit, Unicom ELB-CNC control with integrated 024 CNC Unicon electric hand wheel, display screen, analogue spindle load display, stepless adjustable cross feed, coolant device with magnetic-roller chip collector, full housing, separate electrical cabinet, additional grinding wheel with flange

Condition: used, Year of construction: 1996, grinding length 600 mm grinding width 250 mm workpiece height ca. 385 mm table surface area 600 x 200 mm table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min Todjt Tqrnspfx Ac Nsf rapid traverse cross 1000 mm/min total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t Tjdsd Ha E Sspfx Ac Njf mandrel Ø: 508 mm

Condition: excellent (used), feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, CNC TOS INTOS ZEBRAK FNG30 milling machine Tsdpfx Acjrq D Uks Nsf TNC310 Heidenhain control X450mm Y300mm Z300mm tool clamping hydraulic inverter on spindle SK40 machine in very good condition

Condition: ready for operation (used), Year of construction: 1966, functionality: fully functional, machine/vehicle number: 8588, overall weight: 400 kg, rotational speed (min.): 3,120 rpm, rotational speed (max.): 3,860 rpm, height adjustment type: mechanical, grinding diameter: 200 mm, disc diameter: 150 mm, distance table to spindle center: 400 mm, Tool Grinding Machine Used Cutting Wheel Sharpening Machine, Grinding Machine, Cutting Wheel Sharpener Lorenz Type MS 80, year 1966, without coolant system, particularly suitable for sharpening rack cutter wheels (cutting wheels), maximum rack wheel diameter to be ground approx. 200 mm, maximum stroke of the grinding spindle carriage approx. 50 mm, clamping table surface approx. 600 x 245 mm, manual longitudinal table travel 250 mm, manual vertical table adjustment 275 mm, with coarse and fine feed, max. usable grinding wheel diameter 150 mm. Includes the MSV 75 cutting wheel sharpening device for producing a conical surface grind on straight-cut cutter wheels. Driven by a worm gear motor. Tsdoffybgjpfx Ac Nef Supplied with operating manual for this high-performance special machine for sharpening cutter wheels. Cutting wheel offered at a special price. Viewing under power is possible by prior appointment. Price on request / Special price All technical specifications are subject to errors/typing mistakes. Sale is strictly limited to EU countries.

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Weight of the machine approx: 2, 2 t Tjdpfelz Nxwex Ac Nsf Machine dimensions:

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Tedei Hn Sropfx Ac Nsf Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN)

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. Tjderxt Axjpfx Ac Njf • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Tsdorxt Hqopfx Ac Nof Year 2002 Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw