Sheet metal working center

RAS Multibend-Center 79.22-2

Condition: excellent (used), Year of construction: 2020, We have just collected these three Vemag TM203 link cutters. They were bought new in 2020 Ksdpfx Adjt Ui U Dowsll

Year of construction: 1993, condition: used, machine/vehicle number: 101793 , Palletfeeder PD 78-T 4 Buckles (manual) 3 Folding Knives Up to 32 pages folding Kjdpek Izq Eefx Adwsll Horizontal Stack Delivery SBP46

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Double edger and trim circular saw with electronic control, consisting of: RET alignment and infeed table. Chain bed in front of the machine with liftable and lowerable pressure roller. Laser unit. DK 90 L 1000: Passage width 1000 mm. Cutting height 125 mm. Feed speed frequency-controlled up to 100 m/min. Automatic roller height adjustment with roller pressure. Width adjustment hydraulically, electronic positioning control with the following setting options: Continuously variable, cm indexing, and switchable to 2 cm indexing. Cutting width between flanges 24 - 440 mm. 10 adjustable fixed dimensions, direct input in mm. Constant dimension allowance, shrinkage allowance (percentage). Kjdjwn D Izspfx Adwoll Splitter wedge pair: 1 x zero line, 1 x independently hydraulically adjustable with electronic positioning control. Splitter wedge opening 48 - 600 mm. Chain bed on the outfeed side. Motor 90 kW with power belt drive. Hydraulic unit. Chip separator ASV DK II with 2 separating lamellae. Electrical cabinet with power section and PLC control. Control panel. Lath clamping sleeve 403 mm clamping length. Adjustment and zero sleeve. Professionally dismantled and loaded onto truck, free of charge.

Year of construction: 2024, condition: new, functionality: fully functional, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt Kedpfx Adjqfcviswjll - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 3.04-00054, Equipment: type plate available, Used Bellaform extruder Type: BH45-30D Year of manufacture: 2013 With screw dimensions 45 mm - 30 l/d, screw speed approx. 160 rpm With 30 kW water-cooled servo motor, with gearbox Cylinder with 4 heating/cooling zones and water bushing in the feed area Material hopper plus a COLORTRONIC dosing screw for masterbatch A melt pressure sensor Control cabinet integrated into the machine frame, with factory-new PLC and With new touch panel for simple and intuitive operation This extruder has been functionally tested! Kodpouxa Abofx Adwjll Dimensions: approx. 195 x 70 x 200 cm (L x W x H with hopper)

Condition: excellent (used), Year of construction: 1999, Used Large Format Trumpf 500r 1600 throat Cnc Punch Press For Sale TRUMPF TRUMATIC T500R Large format rotation cnc punch press for sale This machine will process 3metre x 1.5metre sheet without a reposition. Trumpf uk specification: Brand: TRUMPF Model: TRUMATIC 500R Type: CNC Punching Machine Control: Bosch CC220 Punching force (ton)22 Capable of taking multi tool Kledpfotltl Hsx Adwjl Trumpf TC 500R Turret Punch 3000 X 1500mm large format machine 1600 throat x 3metre rail. TRUMPF TRUMATIC 500 CNC PUNCH WITH CONTROL & AIR TABLE CAPACITY: 220KN SERIAL YEAR: 1999

Condition: new, Year of construction: 2025, functionality: fully functional, air pressure: 6 bar, Tube filling machine, tube filler Efficiency Up to 40 tubes per minute Dosing Range From 5 ml to 270 ml (High precision ensured by servo drives) Tube Diameter From 19 mm to 50 mm Tube Height From 70 mm to 210 mm Tube Material Heat-sealable (laminate/plastic) or aluminum tubes Dosing System Servo Drives (High repeatability) Control System PLC + Intuitive HMI Panel (with recipe saving capability) Formats One tube format included Automatic Tube Filling Machine JTB-40 Fenix | Up to 40 tubes/min | Wide Dosing Range: 5-270ml | Made in Europe. Professional Automatic Tube Filler JTB-40 Fenix - Perfect for Cosmetics, Chemicals and Pharmaceutical Production. We offer for sale the highly efficient, automatic Tube Filling Machine JTB-40 Fenix – a flagship model from Jedliński Packaging, designed for maximum precision and production flexibility. This reliable machine is the ideal solution for companies looking to optimize the tube packaging process for laminate (heat-sealable) and aluminum tubes. Kodpfx Aek Abyvodwell With a high output of up to 40 tubes per minute, the JTB-40 Fenix guarantees a significant acceleration of your production lines. Machine Dimensions and Ergonomics The JTB-40 Fenix Tube Filler features a compact, well-thought-out design, making it easy to integrate into existing lines: Height: 1.9 m Length: 1.7 m Width: 1.3 m Main Advantages and Standard Features Precise Dosing: The system based on servo drives ensures accurate dosing of products with various viscosities – perfect for tube filling creams, gels, pastes, and ointments. Process Automation: The machine automatically feeds, orients (using a marker sensor), fills, seals/closes, and codes the tubes, minimizing operator involvement.AISI 316 Materials: All parts in direct contact with the product are made of high-quality AISI 316 stainless steel – the standard required for cosmetics manufacturing and pharmaceuticals. Hot Air Sealing: The version for heat-sealable tubes uses reliable Hot Air sealing technology, ensuring an aesthetic and durable closure. Intuitive Operation: The control panel allows for quick parameter changes and switching between saved recipes.Inspection and ContactThe JTB-40 Fenix machine is available for immediate viewing and testing under load at our company premises. Please contact us to schedule a visit! Seller Contact Details: Company Jedliński Packaging sp. z o.o. Address ul. Wodna 3, 05-090 Raszyn, Poland Location Machine available for viewing and testing at the company's premises Don't miss out! Invest in a new quality of packaging with the JTB-40 Fenix automatic tube filling machine.

Condition: good (used), functionality: fully functional, Year of construction: 2012, machine/vehicle number: 778 F 319, Lazer Cutting Kljdpjmx Rrlsfx Adwsl Fabrikat: Prima Power Typ: Palatino 1530 Baujahr: 2012

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O., Type: PAK 5.0, Machine number: 457, Year of construction: 2015, Voltage 400 V, 3 Ph, Power 7.5 kW, Pressure 6-8 bar, Weight: 1500 kg, 2-track cup denester, Klsdpfx Adev Abm Eowsl Dimensions: 4900 mm x 1500 mm x 2300 mm.

Year of construction: 2012, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg SOURCE: FIBER 4000 ; 4000 W CONTROL UNIT: ByVISION WEIGHT: 15000 Kg OVERALL DIMENSIONS: 12900 x 6750 x 2500 mm ACCESSORIES: FUME EXHAUSTER Kedjvghbqspfx Adwsll NOTE: AUTOMATIC NOZZLE CHANGE