Second-hand machinery for sale (2,471)

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1473114, This filter and cooling unit was previously used for two Starrag Heckert machining centers (lot 2770011 and 12). Order number: 2153651 Control voltage: 24 V DC Connection voltage: 3×400 V + PE / 50 Hz Connected load: 6.30 kW Fuse: 50 A Country of manufacture: Germany Additional unit: Manufacturer: BKW GmbH, Wolfschlugen Model: WRK3C-2KK2P Year of manufacture: 2005 Refrigerant: R134a Permissible operating pressure: 24 bar Voltage: 400 V / 50 Hz Output: 5.02 kW Control voltage: 24 V DC Country of manufacture: Germany Gujdpfx Aex Hinkeh Dok

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Length of entry panel: Max. 3,048 mm, Min. 370 mm Width of entry panel: Max. 1,524 mm, Min. 300 mm Diagonal of entry panel: Max. 3,408 mm Length of exit panel: Max. 3,048 mm, Min. 250 mm Width of exit panel: Max. 1,524 mm, Min. 60 mm Max. sheet thickness for blanks with tensile strength 400 N/mm²: 3.5 mm Minimum sheet thickness: 0.5 mm MACHINE DETAILS Voltage: 380 V Frequency: 50 Hz Current: 119 A Rated power: 61 kW Max. punching head force: 7 t (40 presses), 26 t (4 presses) Max. force of lower cylinder: 6 t Double punch force: 12 t (2 hydraulic punches) Cooling unit power: 32.2 kW EQUIPMENT Motorized scissor lift table type: TC27155C Vertical lift travel: 550 mm Gsdpox Hvymefx Ah Deuk Usable load capacity: 5,000 kg Motorized roller table type: PRL3814F Minimum size of sheet stacks to be transported: 300 x 100 mm Universal destacking device type: DUF15 Punch head type: H2 Oildynamic hydraulic power unit type: C1515 (3-part pump unit) Lower cylinder type: EI09 Double rotary punch type: P2R36 Water-air chiller unit type: R121 Refrigerant: R407C Software type: RIO Control and management system type: MMACHNT-MICROMach Processor: PENTIUM INTEL II 400 MHz Operating system: WINDOWS NT Machine documentation available

Condition: used, mileage: 11,958 km, power: 240 kW (326.31 HP), first registration: 05/2012, fuel type: diesel, axle configuration: 6x6, color: other, Year of construction: 2012, Equipment: additional headlights, air conditioning, all wheel drive, differential lock, parking heater, This Mercedes-Benz Zetros 2733 A 6×6 will be auctioned online in our vehicle auction on January 16th. Technical details of the vehicle: First registration: 09.05.2012 Chassis number: WDB9490661V220335 Mileage: 11,958 km Drive: 6×6 permanent Condition: Very good, low mileage Note: the exhaust may need to be relocated back to its original position Mercedes-Benz Zetros 2733 A 6×6 – an extremely off-road capable and rugged heavy-duty payload carrier. The vehicle was factory-designed for demanding off-road applications and was subsequently fitted by EMPL with a professional container frame including a fully hydraulic leveling system. According to TÜV, the Zetros is both technically and visually in very good condition and shows exceptionally low mileage of under 12,000 km. Guodpfxsx E Ukzj Ah Dsk • Engine: 6-cylinder diesel, 7,200 cm³ • Power: 240 kW • Length: 7,390 mm • Width: 2,500 mm • Height: 3,100 mm • Gross vehicle weight: 26,000 kg • Axle loads: 1st axle: 7,500 kg 2nd axle: 9,500 kg 3rd axle: 9,500 kg • Tyres: 395/85 R20 (new tyres in 2016) Modifications & special equipment (EMPL) • Container frame suitable for ISO 20-ft containers • Hydraulic leveling system (four individually adjustable supports) • Control box & emergency control panel • Storage boxes, tool compartments, brackets • Twist-lock container securing • Spare wheel carrier • Protective grilles and reinforced chassis modifications • Full respray in military sand color Equipment (ex-works & special options) • Three differential locks (front axle, rear axle group, longitudinal lock) • Transfer case VG1700 • ABS • NATO jump-start socket • Ringfeder trailer coupling • Webasto Thermo 90 / Air Top 2000 auxiliary heating • ISRI driver’s seat with comfort suspension • Air conditioning • Additional lighting and work lights • 24-volt electrical system, auxiliary tanks Condition & history • Extremely low mileage, practically test operation only • MOT, SP and emissions inspections always passed without faults • Braking system with outstanding measured values • Clean and well-kept interior • No known damages or structural impairments Special advantages of this vehicle • Extremely low mileage • Military heavy-duty platform • 6×6 drive with three differential locks • Professional EMPL custom superstructure • Complete inspection and maintenance history • Ideal for special-body solutions, crisis relief, logistics, or expeditions As shown Function not tested Subject to prior sale

Condition: used, mileage: 6,25,394 km, power: 184 kW (250.17 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, gearing type: mechanical, emission class: euro1, Year of construction: 1999, Engine capacity: 7.284 cc Empty weight: 12.475 kg Carrying capacity: 13.525 kg GVW: 26.000 kg Auction item. Garbage truck was in working condition. Not used for few moths. The Euro standard is not indicated in the documents, there is no Euro standard certificate. Gusdpfxsx Hhits Ah Dsk There is 2 sections for garbage. Sold as seen in pictures.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 44,500 h, laser source model: CV5000, TECHNICAL DETAILS Laser: CV5000 MACHINE DETAILS Operating hours: 44,500 h Gjdpfx Ahsx Hfcqs Douk Note: Information regarding the machine's layout can be found in the attached document.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 93,500 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 300 mm, controller model: Fanuc Series 16i MB, workpiece diameter (max.): 32 mm, TECHNICAL DETAILS Travel X: 250 mm Travel Y: 200 mm Travel Z: 300 mm Max. workpiece diameter: 32 mm Spindle speed: 30,000 rpm Spindle taper: HSK-E40 Gjdpfx Ajx E U Exeh Douk Tool changer: 48 positions MACHINE DETAILS Number of axes: 5 Control: Fanuc Series 16i MB Power-on hours: 93,500 h EQUIPMENT Bar feeder LNS Hydrobar Express 332 Coolant filtration system Spindle cooling Through-spindle coolant (IKZ)

Condition: used, Year of construction: 2012, operating hours: 44,900 h, functionality: fully functional, machine/vehicle number: 16504, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: Gjdsx Him Hspfx Ah Djuk -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This machine used a single cooling unit together with another machine (lot 2770012). The cooling unit (lot 2770249) is offered separately. This machine does NOT include a cooling unit. The machine/plant does not include any product-related tools, fixtures, or grippers (robots). Spindle hours approx. 25,600 Operating hours approx. 44,900

Condition: ready for operation (used), functionality: fully functional, drilling depth: 710 mm, rotational speed (max.): 1,250 rpm, spindle diameter: 100 mm, table length: 1,120 mm, table width: 1,250 mm, Submitting a bid obligates the buyer to collect the item by the deadline of 28/01/2026! A prompt appointment for collection must be arranged after the end of the auction, as the machine has not yet been dismantled. TECHNICAL DETAILS Guedpfex Hfugox Ah Dsk Spindle diameter: 100 mm Spindle taper: ISA steep taper No. 50 Drilling depth in one pass: 710 mm Lowest spindle center height above table: 0 mm Highest spindle center height above table: 1,200 mm Maximum distance between spindle sleeve and tailstock: 2,300 mm Horizontal movement of tailstock: 1,300 mm Spindle speed range: 6 - 1,250 rpm Clamping surface of the table: 1,120 mm x 1,250 mm Longitudinal travel of the table: 1,300 mm Transverse travel of the table: 1,200 mm 34 feed rates for spindle, headstock, and table: 0.017 - mm/rev Infinitely variable feed for headstock and table: 20 - 1,000 mm/min Rapid traverse in all directions: 2,800 mm/min MACHINE DETAILS Main motor power: 11 kW Main motor speed: 1,450 rpm Current type: Three-phase Voltage: 380 Volt Frequency: 50 Hz EQUIPMENT Documentation including wiring diagram Electrical schematics Operating manuals

Condition: used, machine/vehicle number: 86440978, This conveyor dishwasher - Hobart, model: FTN-ESA, is being auctioned online in our industrial auction / machinery auction as part of the Siemens Karlsruhe canteen clearance. Godpfxex Hvzkj Ah Deuk

Condition: used, axle configuration: 3 axles, Year of construction: 2005, Empty weight: 8.450 kg Carrying capacity: 30.550 kg GVW: 39.000 kg Technical inspection expiration date: 2026 Gedpfox E Tabjx Ah Deuk Auction item. Semi-trailer in working condition. Lifting front axle. Capacity about 50 cubic meters. Internal dimensions of the body: length 948 cm., height 218 cm., width 235 cm.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 5,592 h, functionality: fully functional, TECHNICAL DETAILS Grinding length: 1,200 mm Grinding width: 450 mm Max. grinding wheel size: 400 x 60 x 127 mm Distance from grinding wheel to magnet max.: approx. 400 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,300 x 2,400 mm Weight: 5,800 kg Operating Hours Spindle rotation hours: 5,592 h Total operating hours: 44,885 h Guodpjx E U A Djfx Ah Dek EQUIPMENT Magnetic clamping plate 1,200 x 500 mm Borazon grinding wheel (mounted)

Condition: used, Year of construction: 2011, operating hours: 50,500 h, functionality: fully functional, machine/vehicle number: 16520, Equipment: chip conveyor, Pallet changer: -> included Spindle: -> HSK63 tool holder -> Speed 20,000 rpm Linear axes: -> X-axis 750 mm -> Y-axis 750 mm -> Z-axis 725 mm Tool changer: -> 60 stations This unit shared a single cooling unit with another device (lot 2770012). This unit does NOT include a cooling unit. The machine/system does not include product-specific tools/fixtures or grippers (robot). Gsdpex Himtefx Ah Djuk

Condition: used, machine/vehicle number: 86440977, This conveyor dishwasher - Hobart, model: FTN-SC, is being auctioned in our industrial auction / machinery auction for the canteen closure - Siemens Karlsruhe, online. Gsdsx Hvytepfx Ah Dsuk

Year of construction: 2018, condition: used, Auction item. Feed dispenser in working condition. Gjdex E S U Rjpfx Ah Dsuk Sold as seen in the photos.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 352 mm, travel distance Z-axis: 250 mm, rotational speed (max.): 5,000 rpm, controller model: Fanuc Series 0i Mate-TD, Equipment: chip conveyor, TECHNICAL DETAILS Guodpfx Ahjx E Uzms Djk Turning diameter over tool turret: 70 mm Travel X: 352 mm Travel Z: 250 mm Tool stations: 8 Bar capacity: 42 mm Max. spindle speed: 5,000 rpm MACHINE DETAILS Control: Fanuc Series 0i Mate-TD EQUIPMENT Power chuck D135 mm Collet chuck 173E Parts catcher Chip conveyor

Condition: used, Year of construction: 2013, operating hours: 45,500 h, functionality: fully functional, machine/vehicle number: 16546, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pallet Changer: -> Included Spindle: -> Tool holder: HSK63 -> Speed: 20,000 rpm Linear Axes: -> X-axis: 750 mm -> Y-axis: 750 mm -> Z-axis: 725 mm Tool Changer: -> 60 positions This machine is equipped with a coolant filtration system with chiller. • Manufacturer: KNOLL Maschinenbau GmbH / HYFRA Industriekühlanlagen GmbH • Model: PF 210 (Knoll) + TRK30-EF-S (Hyfra Pedia) • Year of manufacture: 2012 • Serial numbers:  - KNOLL: 501973 / 201139433  - HYFRA: 12030089 • Electrical connection: 3×400 V / 50 Hz • Control voltage: 24 V DC • Power consumption: 11.1 kW (Knoll) + 4.8 kW (Hyfra) • Fuse protection: 16 / 25 A (Knoll), 16 A (Hyfra) Godpsx Hilvsfx Ah Douk • Cooling capacity (chiller): 3.8 kW at 42 °C • Refrigerant: R134a, 1.6 kg • Max. pressure: 20 bar • Weight (with coolant): 140 kg Note: Machine/asset does not include any product-related tools, fixtures, or robot grippers. Spindle hours: approx. 9,300 Operating hours: approx. 45,500

Condition: used, machine/vehicle number: 13205736, This frying station with 2 fryers will be auctioned in our industrial auction / machinery auction for the liquidation of the Siemens Karlsruhe canteen, online. Guedpfxjx Hvygo Ah Dsk

Condition: used, mileage: 12,77,253 km, power: 324 kW (440.52 HP), fuel type: diesel, tire size: 385/65R22.5 315/70R22.5, axle configuration: 4x2, fuel: diesel, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Tyre size: 385/65R22.5 315/70R22.5 Engine capacity: 10.518 cc Empty weight: 7.675 kg Gjdpfox E S Uqex Ah Deuk Carrying capacity: 10.325 kg GVW: 18.000 kg Technical inspection expiration date: 2026 Auction item. Truck in working condition. With hydraulics. Only the truck is for sale, the trailer is not for sale together.

Condition: used,

Condition: used, machine/vehicle number: 13205736, This frying station with 2 fryers will be auctioned in our industrial auction / machinery auction for the liquidation of the Siemens Karlsruhe canteen, online. Gjdpfx Ajx Hvx Noh Deuk

Condition: used, mileage: 3,74,442 km, power: 235 kW (319.51 HP), fuel type: diesel, axle configuration: 6x2, fuel: diesel, gearing type: mechanical, emission class: euro4, Year of construction: 2007, Field of application: Construction Applicable material: Concrete Empty weight: 11.900 kg Carrying capacity: 14.100 kg GVW: 26.000 kg Auction item. Concrete truck in working condition. Sold as seen in photos and video. The Euro standard is not indicated in the documents, there is no Euro standard certificate. Guodpox E S Ukefx Ah Dek

Condition: used, This combi-steamer - Rational - CombiMaster, model: CM 201, is being auctioned online in our industrial auction / machinery auction for the canteen liquidation at Siemens Karlsruhe. Gujdpfjx Hvwrex Ah Dek You will find this and many other items on our platform.

Condition: used, machine/vehicle number: E31VH14098017394, This cooking kettle - FRIMA, VarioCooking Center, is being auctioned online in our industrial auction / machinery auction for the cafeteria closure - Siemens Karlsruhe. Gedex Hvv Uspfx Ah Deuk

Condition: used, This cooking kettle – ELRO is being auctioned online in our industrial auction / machinery auction for the canteen closure – Siemens Karlsruhe. Guodex Hvvnspfx Ah Dek

Condition: used, This dish handling platform stacker - Hupfer, model: BDUH 60/60, is being auctioned online in our industrial auction / machinery auction for the canteen liquidation at Siemens Karlsruhe. Gjdpfx Aex Hvu Dsh Djuk