Second-hand machinery for sale (2,406)

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, temperature: 630 °C, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Equipment type: Glass heating furnace for deep processing Application: Homogeneous heating and subsequent cooling of flat glass Suitable glass: Clear float glass Temperature: 630 °C Power supply Supply voltage: 380 V Power supply: 3-phase, 5-wire AC Total installed power: 250 kW Total weight: 10 t System structure Components: Computer, control cabinet, power control cabinet, loading table, heating section, coating section, cooling section, unloading table Dcolquyuov U Rh Aspsg Process flow 1. Glass loading: The flat glass is placed on the loading table and transported to the heating section. 2. Heating: In the heating section, the glass is evenly heated to high temperatures. 3. Coating: After heating, a special coating is applied in the coating section. 4. Annealing: In the cooling section, the glass is cooled evenly and slowly to reduce stress. 5. Glass unloading: The processed glass is transported to the unloading table and removed. EQUIPMENT - Computer - Control cabinet - Power control cabinet - Loading table - Heating section - Coating section - Cooling section - Unloading table

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,200 h, Functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, pressure: 4,000 bar, TECHNICAL DETAILS Working area: 2,000 × 3,000 mm Operating system: Windows 10 Pro (64-bit) High-pressure pump (ECOTRON® 40.37) Flow rate: 3.8 l/min Operating pressure: 400 MPa Oil capacity: 130 l Temperature range: 10 – 35 °C Water consumption: 10 l/min Abrasive dosing system (ALLFI) Tank capacity: approx. 1,400 kg Dcelowcqi Ujquyupeg Flow rate: 2 kg/min Weight: 1,500 kg MACHINE DETAILS Dimensions (L × W × H): 1,800 × 800 × 1,150 mm Weight: 1,000 kg Pump operating hours: 1,200 h Electrical connection Connection: 400 V Total power requirement: 37.0 kW

Condition: used, Year of construction: 2023, Plant No. 251-000410, consisting of a trough vibrator, type CB1200, a vibration dryer, type G1000, a peeler centrifuge, type ZA 06, a lifting and tilting device on the outlet side, a lifting and tilting device on the inlet side, a wastewater treatment plant, and a central control cabinet Djlquyuov Tyu Nspecg

Condition: ready for operation (used), Year of construction: 1994, Functionality: fully functional, machine/vehicle number: 2882-0127-39609, Equipment: chip conveyor, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Control: Deckel Dialog 112 Operating voltage: 3 x 400V Dsljwczz Uoquyupscg Coolant system: Knoll 500 K-1, built in 1994 Information according to manufacturer - no guarantee Travel X / Y / Z: 1000 x 700 x 500 mm Spindle speed: 8,000 rpm Weight: 9.1 t Installation dimensions: 3.7 x 3.7 x 3.0 m

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1995, operating hours: 9,978 h, load capacity: 3,000 kg, lifting height: 5,960 mm, free lift: 1,650 mm, fuel type: electric, mast type: triplex, TECHNICAL DETAILS Lift height: 5,960 mm Free lift: 1,650 mm Load capacity: 3,000 kg Load center: 500 mm Mast type: Triplex, free lift Tire type: SE Motor: Electric Fork carriage and forks Fork carriage width: 3,410 mm Fork positioner: 420 / 2,810 mm Forks: 130 mm × 45 mm × 1,370 mm Dcolqswcq Scjuyupsg MACHINE DETAILS Length: 3,060 mm Width: 2,540 mm Platform width: 1,350 mm Platform height: 440 mm Forklift height: 2,470 mm Mast height: 2,700 mm EQUIPMENT - Fork positioner

Condition: ready for operation (used), Year of construction: 1991, Functionality: fully functional, TECHNICAL DETAILS Production mode: Roll to roll Available outputs: Roll to roll, roll to fold Available printing inserts: 4 × 24" (12") Available perforation cylinders: 24" (12") Perforating station: Available Web guide and web control BST web guiding system: Available BST web inspection camera: Available Production expansions Double production: Possible Dcslswbqadjquyupog Turner bars: Available Additional equipment Numbering: Available Technotrans rewind and cooling units: Available Remote control of the inking units: Available IST UV dryers: Available Cutting units: Available Rewind units: Available EQUIPMENT BST Web Guide BST inspection camera Technotrans cooling system IST UV dryer Perforation unit Turning bars Numbering unit Remote ink control system Cutting unit Rewinder Roll-to-fold output

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, workpiece weight (max.): 1,000 kg, working width: 2,000 mm, plate height: 5 mm, TECHNICAL DETAILS Inlet and outlet roller transport system for material lengths: 2.5 – 14 m Inlet dimensions: 2,100 × 600 mm Machinable panel width: 2,000 mm Panel thickness: min. 5 mm Transport weight: max. 1,000 kg Blast unit Number of turbines: 6 C-380 turbines Dslqujv U Raljyupecg Turbine power: 11 kW per turbine Automatic adjustment: for the 4 outer turbines Throughput speed for BSa 2 12: 1 – 1.5 m/min Abrasive system Abrasive type: round, low-carbon lead shot or cut wire shot Abrasive hopper with screw conveyor: 2.2 kW Screw conveyor: available Bucket elevator with gear motor: 5.5 kW Belt monitoring sensor: Available Cleaning unit Brush system with air blast system: Available Automatic brush height adjustment: Available EQUIPMENT - Brush system with air blast system - Automatic brush height adjustment - Automatic adjustment of the outer turbines - Screw conveyor - Bucket elevator with belt monitoring

Condition: ready for operation (used), Year of construction: 1999, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 3,085 mm, travel distance Y-axis: 1,650 mm, workpiece weight (max.): 230 kg, TECHNICAL DETAILS Cutting force: 220 kN Working area: 3,085 x 1,650 mm Max. sheet thickness: 8 mm Max. workpiece weight: 230 kg Control Control: Bosch Trumagraph CC 220 MACHINE DETAILS Dcslquyswcqfpjupog Machine weight: 13,800 kg Space required: approx. 7,900 x 6,300 x 2,200 mm Electrical specifications Mains connection: 400 V, 50 Hz Connection power: 19 kVA Supply voltage: 400 V Control voltage: 24 V Required fuse: 3 x 35 A Compressed air Compressed air connection: 6 bar

Year of construction: 2023, Condition: used, Serial No. 1468, consisting of a container tilting device, safety light barrier, 2 steep conveyors, each with a cleated conveyor belt, working width approx. 200 mm, machining cell, 2 separation stations, 4 thread formers M8x1.25, control system, PC system Dcelquyov Tydqsupog

Condition: ready for operation (used), Year of construction: 1996, Functionality: fully functional, machine/vehicle number: 182-69, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Connected load: 10 kVA Operating voltage: 3 x 400 V Weight: 4,000 kg Delowczxtoquyupocg Specifications according to manufacturer - no guarantee Travel X / Y / Z: 550 x 300 x 425 mm Tool changing system: Change arms Spindle speed: 10,000 rpm Control system: Siemens Sinumerik Installation dimensions: 3.3 x 2.9 x 3.1 m Transport dimensions on pallet: 3,550 x 2,240 x 2,450 mm

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, product width (max.): 350 mm, product height (min.): 210 mm, product height (max.): 500 mm, product width (min.): 148 mm, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², No reserve price - guaranteed sale at the highest bid! OVERVIEW - VAC-60a Gathering Tower - VAC-60c Gathering Tower - HOF-30 Stacker Drop Table Stitchliner 5500 Saddle Stitcher - ACF-30 Gathering and Folding Unit - SPF-30 Saddle Stitcher - HTS-30 Three-Side Trimmer TECHNICAL DETAILS Gathering Towers Model: VAC-60a / VAC-60c Technology: Touch & Work Type: Vacuum and Air Blower Gathering Tower Number of Stations: 6 Error Prevention: Misfeed, Double Feed, and Jam Detection Job Memory: 9 Memory Locations for Repeat Jobs Programs: Double Cycle (Non-Stop Operation), Interposer (1- and 2-Up), Booklet Program, Block Program, Selective Gathering Expandability: Up to 6 towers (36 stations) Format Range: Max. 148 - 500 × 120 - 350 mm Paper weight: 40 - 350 g/m² Loading capacity per station: 130 mm Production speed: up to 9,500 sets/h Power supply: 230 V; 50/60 Hz – 1.86 kW Dimensions (W × D × H): 842 × 652 × 1,961 mm Collating Towers Model: Horizon VAC-60Hc Function: Double-sided collating Use: Towers can be used separately Weight per tower: 310 kg Stack lowering table Model: Horizon HOF-30 Function: Non-stop operation despite misfeed and double feed detection Gathering system Model: Horizon Stitchliner 5500 Components: ACF-30 + SPF-30 + HTS-30 (Collating & Folding + Saddle Stitcher + Three-Side Trimmer) Format setting: Fully automatic Format templates: DIN formats and standard fold types Job memory: 200 memory locations for repeat jobs Stitching system Stitching options: Saddle stitch, block stitch, Corner stitching Stapling heads: 2 (optionally expandable to 4) Ring eyelet stitching: possible with ring eyelet stitching heads Staple spacing: 60 - 150 mm Stapling thickness: max. 5 mm (3 mm with ring eyelet) Processing Infeed format: 210 - 500 × 148 - 350 mm Paper weight: 60 - 350 g/m² Processing thickness: 8 - 200 pages Speed: max. 5,500 cycles/h Trimming Untrimmed format: 140 - 350 × 103 - 250 mm Trimmed format: 120 - 312 × 95 - 230 mm Dcelquowcf D Hjyupsg Space requirements and weight Installation area: min. 5,709 × 3,240 mm Stitchliner weight: 2,120 kg Power supply: 400 V / 50 Hz Part of the video shows a Horizon ST40, which was replaced with a HOF 30.

Year of construction: 2010, Condition: reconditioned (used), Functionality: fully functional, machine/vehicle number: 13483, No reserve price - guaranteed sale to the highest bidder! With new knives, screens, and wear-resistant plating, as well as overhauled electrical components! TECHNICAL DETAILS Motor power: 75 kW Motor speed: 990 rpm Design: heavy-duty Inlet & Rotor Inlet opening: approx. 450 x 580 mm Rotor length: approx. 600 mm Rotor diameter: approx. 450 mm Number of stator knives: 2 rows Number of rotor knives: 3 x 3 EQUIPMENT - Solid enclosed rotor - Chunk mill, ideal for crushing solid parts - Hardox wear-resistant plating - new - Stator and rotor knives - new Djlqjwcntdouyupjcg - Hydraulic unit - Temperature monitoring on the housing - Screen basket and 1 screen - new - Control cabinet with new cabling, approx. 6 m

Condition: ready for operation (used), Year of construction: 2006, operating hours: 55,176 h, Functionality: fully functional, machine/vehicle number: A0230 A1231, laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 3,000 / 1,500 / 115 mm Workpiece weight: 900 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning spread: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Stainless steel: 25 mm Aluminum: 15 mm MACHINE DETAILS Dimensions: 11.25 x 4.6 x 2.4 m Weight: 12 t Power consumption: 37 - 76 kW Connected load: 109 kVA Beam on-time: 24,314 h Laser on-time: 55,176 h Djlqjwck Ideuyupjcg CO2 consumption: 1 l/h N2 consumption: 6 l/h He consumption: 13 l/h Cutting gas consumption: 500 - 2,000 l/h

Condition: ready for operation (used), Year of construction: 2001, operating hours: 62,433 h, Functionality: fully functional, punching force: 22 t, sheet thickness (max.): 8 mm, travel distance X-axis: 2,585 mm, travel distance Y-axis: 1,250 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Control: Siemens Sinumerik 840 D Punching force: 220 kN Max. sheet thickness: 8 mm Max. Sheet thickness for stainless steel: 8 mm Max. Punching diameter: 76.2 mm Working area and workpiece Working area: 2,585 x 1,250 mm Max. Workpiece weight: 200 kg Speed and precision Max. Speeds: 100 / 60 / 116 m/min Accuracy: 0.1 mm MACHINE DETAILS Operating hours: 62,433 h Delquyjwcqf Nsupjcg Length: 6,100 mm Width: 6,760 mm Height: 2,500 mm Weight: 13,000 kg

Condition: good (used), Year of construction: 2021, Make: SPINNER, Type: TC600 65SMCY, Year of manufacture: 2021, Serial no. AT1207, max. swing Ø 600 mm, max. turning Ø 400 mm, max. turning length 650 mm, travel x/y/z = 275 / Y +50/-40/ 700 mm, max. rapid traverse x/y/z = 15/15/2 m/min, turning spindle 1: max. speed 4,000 rpm, spindle nose A8/DIN, chuck 250 mm, spindle power 21/27 kW, torque 201/258 Nm, turning spindle 2: max. speed 6,000 rpm, spindle nose Ø 110 mm, chuck 165 mm, spindle power 20/12 kW, torque 64/76 Nm, tailstock: taper mount MK4, quill Ø NC-Body, stroke 570 mm, tool turret (driven Tools) 16x VDI30/BMT45; 12x VDI40, counter spindle, Siemens control system, type 840DE, Spinner touch panel, Shopturn handheld unit, measuring probe for tool measurement, Spinner workpiece automation, type Robobox, consisting of a workpiece pallet, 5 drawers, dimensions WxHxD = 800x600x200 mm each, Fanuc loading/unloading robot, type M-10ID12, load capacity 12 kg, reach 1,420 mm Dcelquyev Txq Njupog +++ Attention: Machine is part of an online auction! +++

Condition: good (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: MS0003-000018, turning length: 320 mm, turning diameter: 32 mm, spindle speed (max.): 8,000 rpm, tool length: 120 mm, tool diameter: 16 mm, number of slots in tool magazine: 24, TECHNICAL DETAILS Control: Fanuc 31i-A Max. machining diameter: Ø 32 mm Max. machining length without re-clamping: 320 mm Gang tool holder - Max. front drilling/tapping: Ø 13 mm / M12 Max. drilling/tapping: Ø 8 mm / M6 Dcelquyowcn Eysupeg Max. back drilling/tapping: Ø 10 mm / M8 Tool configuration Max. number of mountable tools: 24 Turning tools: 6 pcs Front machining tools (drilling): 4 pcs Cross machining tools: 4 pcs Deep hole drilling tools: 2 Back machining: 4 + 4 Tool size Turning tool holder: 16 x 16 x 120 mm Sleeve: Ø 25 mm [front tool holder Ø 32 mm] Spindle and Axis data Main spindle speed: 8,000 rpm Cross tool speed: 6,000 rpm Sub spindle speed: 8,000 rpm Rapid traverse: 32 m/min Main/sub spindle indexing: 0.001° Center height: 1,060 mm Chuck & guide bush Main/sub spindle chuck: TF37 Guide bush: TD32S Mandrel for front, back and cross tools: ER16 [front tool holder ER20] Motors & drive Main spindle motor: 5.5 kW / 7.5 kW Sub spindle motor: 2.2 kW / 3.7 kW X1, Y, Z1 axis motor: 1.0 kW X2, Z2 axis motor: 1.0 kW Cross tool motor: 1.0 kW Rear tool motor (rotating): 1.0 kW Coolant pump motor: 0.4 kW MACHINE DETAILS Energy requirement: 22 kVA Coolant tank capacity: 180 L Machine dimensions (L x W x H): 2,630 x 1,300 x 1,800 mm Machine weight: 3,500 kg Bar loader: Top Automazioni Record

Condition: used, 2016 JLG 450AJ 4x4 Diesel Articulated Boom Lift, 15.7m Working Height, 230kg Platform Capacity Dcelquyowc Dpzjupeg This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 14th – 16th May 2025. For more information, go online.

Condition: ready for operation (used), Year of construction: 2011, operating hours: 49,485 h, Functionality: fully functional, machine/vehicle number: A0270 A2061, laser power: 5,000 W, sheet thickness aluminum (max.): 12 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 6,000 / 2,000 / 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning variation: ± 0.03 mm Laser Cutting head: with CoolLine Model: TruFlow 5000 Power: 250 - 5,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Mild steel: 25 mm Stainless steel: 20 mm Aluminum: 12 mm MACHINE DETAILS Dimensions: 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 33 - 72 kW Connected load: 109 kVA Beam on-time: 26,620 h Laser on-time: 49,485 h Compressed air connection: 7 - 10 bar Dcslquswckyaeyupsg Nitrogen connection: 30 bar Oxygen connection: 20 bar

Condition: ready for operation (used), Year of construction: 2008, operating hours: 72,918 h, Functionality: fully functional, punching force: 22 t, laser power: 2,700 W, sheet thickness (max.): 6 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness steel (max.): 8 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Dcjlquyswcqa Houpog Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: L220M0165, turning length: 510 mm, turning diameter: 250 mm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 550 mm, Maintenance of the machine in 2024 for €10,000 TECHNICAL DETAILS Control: CNC Fanuc I Series Turning diameter over bed: 250 mm Max. machining diameter: 250 mm Max. turning length: 510 mm Dcolquyuswcnubspjg Spindle Spindle bore: 53 mm Spindle speed: up to 6,000 rpm Drive power: 12 kW Axes X-axis travel: 175 mm (160 mm + 15 mm) Z-axis travel: 550 mm Tool carrier Turret: 12-way Driven tools: All 12 stations MACHINE DETAILS Machine weight: 4 t Rated power: 23.68 kVA Part counter: 1,313,733 Control switch-on time: approx. 53,000 h EQUIPMENT - Tailstock - Bar loader LNS Turbo

Condition: like new (used), This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany, 14th – 16th May 2025. For more information, go online. Delqewc Dnkeuyupecg Unused Deutz Fahr AGROFARM 115G 4WD Tractor, A/C, Front Weights (Meter Reading: 17 Hours)

Condition: ready for operation (used), Year of construction: 2008, operating hours: 42,130 h, Functionality: fully functional, machine/vehicle number: A0270 A2021, laser power: 6,000 W, sheet thickness aluminum (max.): 15 mm, sheet thickness steel (max.): 25 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 115 mm, TECHNICAL DETAILS Travel X / Y / Z: 6,000 / 2,000 / 115 mm Workpiece weight: 2,800 kg Speed parallel/simultaneous: 200 / 300 m/min Control: Siemens Sinumerik 840 D Accuracy Minimum travel: 0.001 mm Positioning error: ± 0.1 mm Positioning spread: ± 0.03 mm Laser Model: TruFlow 6000 Power: 300 - 6,000 W Wavelength: 10.6 µm Beam mode: TEM01 Scanning frequency: 0.01 - 10 kHz Gases: CO2 / N2 / He Sheet thicknesses Dolqjwckt Hjuyupocg Mild steel: 25 mm Stainless steel: 25 mm Aluminum: 15 mm MACHINE DETAILS Dimensions: 16.95 x 5.55 x 2.55 m Weight: 16 t Power consumption: 43 - 89 kW Connected load: 109 kVA Beam on-time: 21,660 h Laser on-time: 42,130 h Compressed air connection: 7 - 10 bar Nitrogen connection: 30 bar Oxygen connection: 20 bar

Condition: used, Year of construction: 2024, 2024 Ford Transit L4H3, 2.0L Diesel 96 kW, Manual Gearbox, A/C, Navigation (40.056 KM)(German Reg. Docs. Available) (Meter Reading: 40056 Kilometres) Delqewc Di Uouyupecg This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 14th – 16th May 2025. For more information, go online.

Condition: used, Year of construction: 2017, 2017 JCB 535-95 Turbo Powershift Telehandler, Forks, WLI Delqjwc Dihsuyupjcg This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 14th – 16th May 2025. For more information, go online.

Condition: used, Year of construction: 2016, 6 Ton Swivel Skip Dumper, Roll Bar Dcslowc Dibjquyupeg This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 14th – 16th May 2025. For more information, go online.