Second-hand machinery for sale (2,402)

Condition: ready for operation (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 1140653, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Control: Haas Spindle mount: CT 40 Dceln E Eev U Nn Uoabjg EQUIPMENT Tool changer Chip conveyor Swivel axis Further information according to manufacturer - without guarantee Travel paths X / Y / Z: 711 x 406 x 394 mm Distance spindle to table: 546 mm Spindle speed: 10,000 rpm Table dimensions: 864 x 381 mm T-slot spacing: 125 mm T-slot width: 16 mm T-slot depth: 27 mm Number of slots: 3 Table load: max. 113 kg Tool changer: Double gripper Tool diameter: 64 mm Tool length: 178 mm Tool weight: 5.4 kg Tool slots: 18+1 Machine dimensions: approx. 2.8 x 2.2 x 2.6 m Transport dimensions: approx. 2.6 x 2.3 x 2.5 Transport weight: approx. 2.5 t

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° Doleu R N Hyon E Eabocg - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2404605 + 2404606, A double package of two new robots will be auctioned! The robot will be delivered free of charge. TECHNICAL DETAILS Number of axes: 6 Max. joint payload: 220 kg Additional forearm load: 50 kg Horizontal reach: 1033 - 2701 mm Motion ranges Axis 1 stroke: ± 180° Axis 2 stroke: +95° / -75° Axis 3 stroke: -10° / -246° Axis 4 stroke: ± 2700° Axis 5 stroke: ± 125° Axis 6 stroke: ± 2700° Precision Repeatability: 0.08 mm Mechanics and design Tool coupling flange: ISO 9409 – 1 – A 160 Robot weight: 1220 kg Protection class: IP65 / IP67 Control unit: C5G-ACC3-E, CR17930685 Teach Pendant: GTP5S1 TP5 Teach Pendant, Cable Length: 10 m, CR17431986 System Software: Comau Controller System Software, CR17926000 System Documentation: DVD with Documentation, CR17930160 Control Software: "C5G Open" Software, CR17926221 Communication & Interfaces Ethernet I/P Master Module: CR10143983 EtherNet/IP Adapter [Slave]: CR10144083 PNMI Profinet Multibus Interface: CR17130964 Powerlink Card for APC: C5G-PCA C5G-PFG-BCO Bus Module: Coupler Bus Module, CR10146383 Cables & Connections Standard Power Cable: C5G - 24 VDC, CR17240260 Djln E Eewbqlmjabjcg Powerlink Ethernet cable (1.5 m): CR17231863 Multibus cable (40 m): CR18567666 Cable set for large robot (40 m): CR18945885 Multibus & Air connection kit (axis 6 to gripper): 16689580 Mechanical Equipment Adjustable mechanical end stop axis 1: CR82342400 Mounting accessories (screws, pins): CR82342700 Distribution panel cover: CR82352200 Safety & Options Allen Bradley Ethernet IP Safe Module: CR17131681 Handling connection kit NJ4 Ethernet/IP: CR18970380

Condition: ready for operation (used), Year of construction: 1981, Functionality: fully functional, working width: 1,000 mm, No reserve price - guaranteed sale to the highest bidder! Dcjln Eov Up Dpj Eabog A complete, fully CNC-controlled planer is for sale. A viewing/training session is available upon purchase prior to disassembly! TECHNICAL DETAILS Costa Planer Number of spindles: 10 Control: CNC Spindle Configuration 1. Spindle horizontal 2. Lifting spindle right vertical 3. Lifting spindle left vertical 4. Lifting spindle horizontal 5. Lifting spindle right vertical 6. Lifting spindle left vertical 7. Lifting spindle top horizontal 8. Lifting spindle bottom horizontal 9. Lifting spindle bottom horizontal 10. Jointer spindle bottom horizontal 1x Canali Band Saw 1x Büttfering Sander Working Width: 1100 mm Number of Units: 3 1x Combination Unit 1x Single Unit 1x Brush Unit Conveyor Technology Stacking Unit Rupa Vacuum Lifter (age: approx. 1.5 years) Cross Conveyor 2x Longitudinal/Cross Conveyors Roller Conveyor with Discharge Roller Conveyor to Büttfering Sanding machine Lifting platform Maintenance was always carried out at regular intervals and professionally. Previous application: Production of wainscoting and parquet (panels) Reason for sale: New construction Machine available from September 2025!

Condition: good (used), Year of construction: 2016, Functionality: limited functionality, machine/vehicle number: 550607, feed length X-axis: 384 mm, feed length Y-axis: 317 mm, feed length Z-axis: 217 mm, grinding wheel diameter: 203 mm, rotational speed (max.): 10,000 rpm, Tool grinder with grinding wheel changer and Fanuc FastLoad automation Condition: There may be a defect in the control display. A similar machine, built in 2019, has already been successfully auctioned by the same seller! FastLoad Loading System Special Feature: Fully enclosed within the machine enclosure Application: Automation solution for low-volume production Access: Operator access from the front of the machine Gripper Set: One set for the entire diameter range Space Requirements: Does not increase the machine footprint TECHNICAL DETAILS Peak grinding spindle power: 9.5 kW Direct-drive grinding spindle: Yes Speed: 10,000 rpm Number of numerically controlled axes: 5 Grinding wheel diameter: 203.5 mm Grinding wheel changer: 2 slots Dceln E Esv T Uzqeabjg Axes X-axis: 384 mm Y-axis: 317 mm Z-axis: 217 mm C-axis: 230° A-axis: 360° A-axis rotation: 600 rpm Tool Handling Suitable tool diameter: Ø2 - 20 mm Tool length range: 30 - 150 mm Loading time: 20 seconds Number of tools Ø2 mm: 153 Number of tools Ø12 mm: 36 Measurement and tool control Measuring probe mounted on the grinding head: yes Tool profile measurement: directly on the machine without removing the tool MACHINE DETAILS Polymer concrete machine base: yes Installation dimensions: 1,930 x 2,190 x 2,015 mm Machine weight: 4,500 kg Connected load: 16 kVA EQUIPMENT - Measuring probe mounted on the grinding head - Possibility of direct tool profile measurement - Polymer concrete machine base - Grinding wheel changer - Fanuc FastLoad automation

Year of construction: 2003, Condition: good (used), Functionality: fully functional, screw diameter: 27 mm, TECHNICAL DETAILS Capacity: 10 – 40 kg/h Screw and Barrel Technology Design: Synchronous Screw center distance: 23 mm Screw diameter: 2 × Ø27.0 mm Kneading disc and kneading block diameter: 27.0 mm Screw material: 1.2379 Cylinder diameter: 27.2 H8 Cylinder material: 1.8550 nitrided, nitriding layer 0.5–0.6 mm Screw length: 40 D Screw torque: 2 × 100 Nm Screw speed: max. 500 rpm Drive Drive type: DC shunt motor Drive power: 10.5 kW Doln E Easv U Da Ssbecg Motor speed: max. 2,690 rpm Gear ratio: i = 5.38 Power transmission: Clutch Heating and cooling system Number of heating zones: 11 Heating capacity: 9.85 kW Number of cooling zones: 9 Cooling type: ZIK (Intensive Cylinder Cooling) Filling zone cooling: Water Filling zone cooling water consumption: 30 l/h Process parameters Melt pressure: max. 300 bar Melt temperature: max. 350 °C Injection height: 1,050 mm Dimensions and weight Weight: approx. 950 kg Length: 2,630 mm EQUIPMENT - Segmented screws and barrels - Synchronized technology - Degassing

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: P54762/12A, ram adjustment: 100 mm, stroke adjustment: 140 mm, pressing force: 80 t, Machine recovered from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Press force: 80 t Stroke adjustment: 8 - 140 mm Ram height adjustment: 100 mm Stroke rate: 105 / min Mold installation Maximum tool installation height: 355 mm Mold upper part weight: 250 kg Deln Eev U Nm Dj Eabocg MACHINE DETAILS Total weight: 7,600 kg Operation: Two-hand operation Further information according to the manufacturer - without guarantee Machine dimensions: approx. 1.6 x 2.3 x 2.6 m Ram area: approx. 600 x 280 mm Table size: approx. 900 x 620 mm

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg Dcslsu Egagon E Eabjg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Condition: new, Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 2404603, load capacity: 220 kg, arm reach: 2,701 mm, The robot will be provided free of charge. TECHNICAL DETAILS Number of axes: 6 Max. joint payload: 220 kg Additional forearm load: 50 kg Horizontal reach: 1033 - 2701 mm Motion ranges Axis 1 stroke: ± 180° Dcsln E Eewbqgwsabeg Axis 2 stroke: +95° / -75° Axis 3 stroke: -10° / -246° Axis 4 stroke: ± 2700° Axis 5 stroke: ± 125° Axis 6 stroke: ± 2700° Precision Repeatability: 0.08 mm Mechanics and design Tool coupling flange: ISO 9409 – 1 – A 160 Robot weight: 1220 kg Protection class: IP65 / IP67 Control unit: C5G-ACC3-E, CR17930685 Teach Pendant: GTP5S1 TP5 Teach Pendant, Cable Length: 10 m, CR17431986 System Software: Comau Controller System Software, CR17926000 System Documentation: DVD with Documentation, CR17930160 Control Software: "C5G Open" Software, CR17926221 Communication & Interfaces Ethernet I/P Master Module: CR10143983 EtherNet/IP Adapter [Slave]: CR10144083 PNMI Profinet Multibus Interface: CR17130964 Powerlink Card for APC: C5G-PCA C5G-PFG-BCO Bus Module: Coupler Bus Module, CR10146383 Cables & Connections Standard Power Cable: C5G - 24 VDC, CR17240260 Powerlink Ethernet cable (1.5 m): CR17231863 Multibus cable (40 m): CR18567666 Cable set for large robot (40 m): CR18945885 Multibus & Air connection kit (axis 6 to gripper): 16689580 Mechanical Equipment Adjustable mechanical end stop axis 1: CR82342400 Mounting accessories (screws, pins): CR82342700 Distribution panel cover: CR82352200 Safety & Options Allen Bradley Ethernet IP Safe Module: CR17131681 Handling connection kit NJ4 Ethernet/IP: CR18970380

Condition: new, Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 8330006 A101, pressure: 35 bar, power: 2,284 kW (3,105.37 HP), rotational speed (max.): 1,800 rpm, rated speed: 1,500 rpm, type of cooling: water, Like New: Originally purchased for a waste incineration project but never installed or used. TECHNICAL DETAILS Temperature: 40 °C Type of cooling: water Speed Speed (min.): 1,500 rpm Speed (max.): 1,800 rpm Rated speed: 1,500 rpm Turbine data point A Rated power: 2,284 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 6 bar Regulated outlet temperature: 196 °C Flow rate inlet/outlet: 13.5 / 9.5 t/h Outlet pressure: 0.1 bar Outlet temperature: 46 °C Turbine data point B Rated power: 2,488 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 8.2 bar Regulated outlet temperature: 226 °C Flow rate inlet/outlet: 13.5 / 12.4 t/h Discharge pressure: 0.15 bar Discharge temperature: 55 °C Turbine data point C Rated power: 2,087 kW Steam pressure: 35 bar Steam temperature: 380 °C Regulated outlet pressure: 6 bar Regulated outlet temperature: 196 °C Flow rate inlet/outlet: 13.5 / 6 t/h Discharge pressure: 0.08 bar Discharge temperature: 42 °C Gearbox data Design power: 2704 W Rated speed LW / SW: 1500 / 8,304 rpm Transmission ratio LW/SW: 5.54 Center distance: 400 mm Max. inlet temperature: 60 °C Oil consumption: 70 l/mm Heat quantity dissipated: 33,694 kCal/h Dolnsv Dvdzo E Eabscg MACHINE DETAILS Overall height: 2,472 mm Overall length: 3,210 mm Overall width: 1,500 mm Total weight: 9,900 kg Electrical specifications Frequency: 50 Hz Type of input current: AC Input voltage: 39 V Rated current: 3 A

Condition: reconditioned (used), Year of construction: 1986, Functionality: fully functional, machine/vehicle number: 12473, travel distance X-axis: 2,995 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 795 mm, spindle speed (max.): 2,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 2,995 mm Y-axis travel: 800 mm Z-axis travel: 795 mm Table size: 2,995 × 800 mm Number of T-slots: 5 Coolant tank: 300 L Spindle Tool holder: SK50 Spindle speed: max. 2,000 rpm Feed Max. feed rate: 5,000 mm/min Max. rapid traverse: 6,000 mm/min MACHINE DETAILS Installation dimensions: 8,000 × 3,500 × 3,000 mm Dsljv R Dxmen E Eabjcg EQUIPMENT - CNC control retrofitted by NCT - Horizontal and vertical machining possible

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, machine/vehicle number: 133084, measuring range X-axis: 3,000 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, Carl Zeiss Pro T compact 3D coordinate measuring machine TECHNICAL DETAILS Control: C99S / FW: 19:05 Measuring head: RDS CAA No. 165: TP20 Measuring software: CMM-OS 5.4.12 Calibration sphere: 13320 r=15.00000 Measuring range: 3,000 x 1,600 x 2,100 mm CMM expansion coefficient X: 11.9 x 10-6 K-1 CMM expansion coefficient Y: 11.9 x 10-6 K-1 CMM expansion coefficient Z: 10.4 x 10-6 K-1 Holos software version: Holos 2.10 SP23 Rev. 3712 CMM-OS software version: CMM-OS 5.4 MACHINE DETAILS Length: 3,500 mm Width: 2,030 mm Dcjln Eov Uaa Is Eabog Height: 3,600 mm Calibration certificate and maintenance schedule from 2022 available

Condition: like new (used), Year of construction: 2013, Functionality: fully functional, machine/vehicle number: 1393, arm reach: 2,500 mm, TECHNICAL DETAILS FP2 Mobility Pack: Included Measurement software: Delcam PowerINSPECT11 with dongle (no runtime limit) Laptop: Dell 6600 with 17-inch 1920x1080 monitor – NVIDIA Quadro 3000M graphics Tripod: Brunson heavy-duty rolling tripod type 230 FIX Measuring range: 2,500 mm Accuracy class: 5 Number of axes: 6 Target single-point deviation: 0.020 mm Target volume accuracy: ±0.029 mm Arm weight: 8 kg Stylus set: Stylus with 3 mm and 6 mm ruby balls, and with 15 mm steel balls EQUIPMENT - Carbon fiber twin-tube construction allows for the separation of stability and measurement - AbsoluteArm Series can begin measuring directly without moving to a reference point - Touch probe system with automatic probe recognition - Mounting plate with magnets - Complies with B89.4.22 - FP2 Mobility Pack - Carrying case Dcslnov Tlrts E Eabog - Magnetic tripod - Test bar L = 700 mm - Test sphere D = 25 mm - Power supply with connecting cable - USB cable for measuring arm and notebook - Dust cover - New pressure cylinder is installed - Relabeling of the measuring arm before calibration in 2023 - ISO 10360 acceptance with 2023 certificate is included Shipping conditions - Ex works, without additional packaging (measuring arm in case and notebook in protective cover) and Brunson rolling stand - i.e. 3 parts - For pickup by the buyer via a freight forwarder, the seller recommends special packaging (approx. 160 x 70 x 70 cm cardboard box on a pallet, packed with bubble wrap inside) and a Euro pallet (Brunson rolling stand) for €180, secured on the pallet with packing straps.

Condition: good (used), Year of construction: 2016, Hosokawa Mikron dual-chamber unloading glove box/isolator, fully refurbished in 2016 by Concept Containment Designs, 316 stainless steel, ATEX compliant. Includes CO.RA dosing valve, exhaust fan, and Mettler-Toledo scale. Alloy: 316 stainless steel Dcjlnev Rxaxe E Eabjg

Year of construction: 2015, operating hours: 3,500 h, Condition: ready for operation (used), Functionality: fully functional, controller manufacturer: Siemens, TECHNICAL DETAILS Processable materials: PE, PP, PS, ABS + fillers Capacity: 50 – 200 kg/h Screws and barrels Screw diameter: 2 × Ø 33.0 mm Length-to-diameter ratio (L/D): 54:1 Screw speed: max. 1,200 rpm Max. continuous operating temperature: 350 °C MACHINE DETAILS Motor power: 64.0 kW EQUIPMENT - Co-rotating screw conveyor - 2 × atmospheric degassing - 2 × side feeders Dcoln E Eaov Uqf Ijbeg - Segmented screws and barrels

Condition: excellent (used), Year of construction: 2001, operating hours: 71,469 h, Functionality: fully functional, machine/vehicle number: 28840003102, travel distance X-axis: 800 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of slots in tool magazine: 180, DMC 80H hi-dyn RS4 with 2-way plate changer and pallet station (4 stations) TECHNICAL DETAILS Control: Control: Siemens Sinumerik 840D Operating hours: Operating hours: approx. 71,469 h Main drive: Direct drive by liquid-cooled, speed-controlled induction motor Speed range operating mode: 0 to 6,000 rpm Speed range setup mode: 0 to 800 rpm Speed range manual interventions: 0 to 5,000 rpm Torque S1 – 100% duty cycle: max. 300 Nm Torque S6 – 40% duty cycle: max. 440 Nm Power S1 – 100% duty cycle: 25 kW Power S6 – 40% duty cycle: 37 kW Feed drive: 3-phase AC synchronous servo motors Feed rate X/Y/Z axes, continuously programmable: 1 to 40,000 mm/min Rapid traverse X/Y/Z axes: 40,000 mm/min Feed rate setup mode X/Y/Z axes: 1 to 2,000 mm/min Feed rate manual interventions X/Y/Z axes: 1 to 5,000 mm/min Feed force X/Z axes (100% duty cycle): max. 15,000 N Feed force Y-axis (100% duty cycle): max. 10,000 N Measuring system: Resolution, smallest input step X/Y/Z axes: 0.001 mm Position tolerance according to VDI/DGQ 3441, direct measurement X/Y/Z axes: 0.010 mm Position tolerance according to VDI/DGQ 3441, direct measurement B-axis: 14 s (arc seconds) Rotary table speed: max. 19 rpm Pallet clamping force: 120,000 N Tilting moment: max. 16,000 Nm Tangential moment: max. 4,800 Nm Number of pallets: 1 Size: 500 x 630 mm Permissible load per pallet (1 pallet): max. 500 kg Permissible load per pallet (2 pallets): max. 900 kg T-slots number x width: 4 x 14 mm Guide groove number x width: 1 x 14 mm Tool system: double chain Number of tool positions: 2 x 90 pieces Travel path tool diameter >200 mm: X-axis 800 mm Travel path tool diameter ≤200 mm: X-axis +500/-400 mm Asymmetrical travel range Y-axis: 710 mm Asymmetrical travel range Z-axis: 710 mm Asymmetrical travel range B-axis: 360° Machine size: 4,600 x 2,400 x 2,700 mm Machine weight: 10,500 kg SCOPE OF DELIVERY Dcslnsv Tp Ewe E Eabog 1x machine: L = 530 cm x W = 240 cm x H = 284 cm; M = 15,000 kg 1x control cabinet: L = 170 cm x W = 60 cm x H = 220 cm; M = 1,800 kg 1x chip conveyor: L = 520 cm x W = 50 cm x H = 150 cm; M = 750 kg, including belt filter from Knoll 2x pallets with accessories: L = 80 cm x W = 60 cm; M = 500 kg 1x Euro pallet with hydraulic unit 1x Euro pallet with some accessories 1x Euro pallet with covers: L = 200 cm x W = 100 cm 1x filter carrier: L = 240 cm x W = 80 cm x H = 200 cm; M = 500 kg 1x tool magazine: L = 300 cm x W = 240 cm x H = 338 cm; M = 7,000 kg 1x 360° rotary table: L = 330 cm x W = 300 cm x H = 220 cm; M = 4,500 kg 1x steep taper: HST 100* DIN 69893 Form A

Condition: good (used), Year of construction: 2002, Functionality: fully functional, spindle speed (max.): 8,000 rpm, No reserve price - guaranteed sale to the highest bidder! Spindle speed: 8000 rpm Specifications according to manufacturer - without guarantee: X-axis: 610 mm Dcslsv R Dirjn E Eabsg Y-axis: 560 mm Z-axis: 510 mm Max. workpiece weight: 300 kg Tool positions: 20 Spindle taper: CAT 40

Condition: ready for operation (used), Year of construction: 2006, operating hours: 20,000 h, Functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rotational speed (max.): 12,000 rpm, number of slots in tool magazine: 60, 5-axis machining center with rotary table (C-axis) and swivel head (B-axis) TECHNICAL DETAILS X-travel: 760 mm Y-travel: 560 mm Z-travel: 560 mm Control: Siemens 840 D Powerline Tool holder: SK 40 Dceln E Eaov T U U Rsbog Number of tool positions in the magazine: 60 Spindle speed: 0-12,000 rpm Pallet size: 630 x 500 mm Infinitely variable feed: 20-15,000 mm/min Rapid traverse: 50 m/min MACHINE DETAILS Machine weight: approx. 12 t Space required: approx. 5.2 x 4.5 x 2.45 m Connected load: 64.2 kVA Total power requirement: 26 kW EQUIPMENT - Rotary table - Swiveling head - Pallet changer with 2 pallets - Tool changer with 60 positions

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 103342, travel distance X-axis: 850 mm, travel distance Z-axis: 315 mm, spindle speed (max.): 3,400 rpm, turning diameter: 340 mm, TECHNICAL DETAILS Turning diameter: 340 mm Swing diameter: 420 mm Turning height: 315 mm X-travel: 850 mm Z-travel: 315 mm Control: Siemens 840 DSL Dcoljv T U T Hon E Eabsg Spindle Spindle speeds (infinitely variable): 0 - 3,400 rpm Main motor power: 37 (48) kW Feed Feed range in X-direction: 0 - 45 m/min Feed range in Z-direction: 0 - 30 m/min Tool Tool system: 12-station turret head Tool drive power: 19 kW Tool speeds: 0 - 6,000 rpm MACHINE DETAILS Total power requirement: 60 kW Machine weight: approx. 12 t Space requirement: approx. 3.7 x 3.1 x 3.3 m EQUIPMENT - CNC vertical lathe - Automatic workpiece feed

Condition: good (used), Year of construction: 2021, with autosampler 7693A/G4513A (model year 2020). GC is model G3540 Djln E Eajv Rw Nlobecg

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, machine/vehicle number: 037611, turning length: 560 mm, turning diameter: 390 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 630 mm, Machine with accessories, jaws, and tool holder TECHNICAL DETAILS Control: Siemens 828 D X1 axes: 230 mm Z1 axes: 600 mm W-axis: 630 mm Y1 axes: ±51 mm C1 / C2 axes: 0.001° Turning diameter and turning length Max. turning diameter: 390 mm Max. turning length: 560 mm Main spindle Dcoln E Eaov Tp Nisbjg Spindle head size: A2 – 6 Spindle bore: Ø62 mm Bar capacity: Ø51 mm Power chuck: Ø250 mm Counter spindle Spindle head size: A2 – 5 Power chuck: Ø200 mm Drive power Main spindle (100% duty cycle): 15.0 kW Main spindle (40% duty cycle): 11.0 kW Main spindle speed range: 4,500 rpm Counter spindle (100% duty cycle): 7.5 kW Counter spindle (40% duty cycle): 5.5 kW Counter spindle speed range: 6,000 rpm Rapid traverses Rapid traverses (X / Y / Z / W): 30 / 15 / 30 / 30 m/min Tooling Tool positions: 12 Tool holder: VDI 40 MACHINE DETAILS Operating hours: approx. 1,000 h Length × Width × Height: 3,290 × 2,180 × 2,337 mm Machine weight: 5,900 kg Supply and operation Operating pressure: 3 bar Coolant tank: 700 l

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, travel distance X-axis: 810 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 510 mm, controller model: CNC Fanuc 18M, spindle speed (max.): 8,000 rpm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS X travel: 810 mm Y travel: 520 mm Z travel: 510 mm Table Number of pallets: 2 Table size per pallet: 800 x 600 mm Load per pallet: 500 kg Spindle Spindle speed: max. 8,000 rpm Doln E Eaev Uq Ehjbecg Tool holder: BT40 Tool changer & cooling Tool positions: 24 Coolant supply through spindle: 20 bar EQUIPMENT - Chip conveyor

Condition: good (used), Year of construction: 2017, Functionality: fully functional, machine/vehicle number: 662172, feed length X-axis: 600 mm, feed length Y-axis: 450 mm, feed length Z-axis: 450 mm, spindle speed (max.): 6,300 rpm, number of slots in tool magazine: 30, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Control type: CNC 532 Feed range / rapid traverse Feed in X, Y, and Z axes: 1 - 6,000 mm/min Deln Esv Ryame Eabocg Rapid traverse in X and Z axes: 6 m/min Rapid traverse in Y axis: 6 m/min 2-axis NC table Clamping surface: Ø 320 mm Center bore: Ø 30 H7 mm Number/spacing of T-slots: 5/63-14 H7 mm Rapid traverse for swiveling/rotating: 16/40 rpm Swivel range: ± 105° Rotation range: n x 360° Max. table load: 100 kg Main Drive Three-phase motor power: 10.0 kW Switching speeds: 2 Work spindles & tools Tool holder: SK 40 Number of tools: 30 (universal) Speed range: continuously variable from 20 - 6,300 rpm Vertical quill stroke: 80 mm MACHINE DETAILS Machine weight: approx. 3,600 kg Machine start-up time: 1193:27:30 Spindle time: 193:02:52 EQUIPMENT - Universal tool changer - Direct position measuring system - Automatic vertical milling head activation - Internal coolant supply & cooling unit - Chip conveyor - Tool breakage detection - Infrared measuring probe

Condition: good (used), last calibration Aug 2024 Dcslsv Rw Eyjn E Eabsg

Condition: good (used), Year of construction: 2020, Vacuum system (cost 74,000 GBP) – UNUSED ON PALLET, PD HO250S6 1K1 EASD A30 BFO VO 00A00001 (ATEX) Dceln E Ejv Rwz Ieabjg